# License Applicability. Except to the extent portions of this file are # made subject to an alternative license as permitted in the SGI Free # Software License B, Version 1.1 (the "License"), the contents of this # file are subject only to the provisions of the License. You may not use # this file except in compliance with the License. You may obtain a copy # of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 # Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: # # http://oss.sgi.com/projects/FreeB # # Note that, as provided in the License, the Software is distributed on an # "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS # DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND # CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A # PARTICULAR PURPOSE, AND NON-INFRINGEMENT. # # Original Code. The Original Code is: OpenGL Sample Implementation, # Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, # Inc. The Original Code is Copyright (c) 1991-2002 Silicon Graphics, Inc. # Copyright in any portions created by third parties is as indicated # elsewhere herein. All Rights Reserved. # # Additional Notice Provisions: This software was created using the # OpenGL(R) version 1.2.1 Sample Implementation published by SGI, but has # not been independently verified as being compliant with the OpenGL(R) # version 1.2.1 Specification. ############################################################################### # # Edited by StApostol. Revision 1 # ############################################################################### param: retval retained version: 1.0 BeginCurve(nurb) return void param nurb NurbsObj in value BeginPolygon(tess) return void param tess TesselatorObj in value BeginSurface(nurb) return void param nurb NurbsObj in value BeginTrim(nurb) return void param nurb NurbsObj in value Build1DMipmapLevels(target, internalFormat, width, format, type, level, base, max, data); return Int32 param target TextureTarget in value param internalFormat Int32 in value param width SizeI in value param format PixelFormat in value param type PixelType in value param level Int32 in value param base Int32 in value param max Int32 in value param data void in reference Build1DMipmaps(target, internalFormat, width, format, type, data); return Int32 param target TextureTarget in value param internalFormat Int32 in value param width SizeI in value param format PixelFormat in value param type PixelType in value param data void in reference Build2DMipmapLevels(target, internalFormat, width, height, format, type, level, base, max, data); return Int32 param target TextureTarget in value param internalFormat Int32 in value param width SizeI in value param height SizeI in value param format PixelFormat in value param type PixelType in value param level Int32 in value param base Int32 in value param max Int32 in value param data void in reference Build2DMipmaps(target, internalFormat, width, height, format, type, data); return Int32 param target TextureTarget in value param internalFormat Int32 in value param width SizeI in value param height SizeI in value param format PixelFormat in value param type PixelType in value param data void in reference Build3DMipmapLevels(target, internalFormat, width, height, depth, format, type, level, base, max, data); return Int32 param target TextureTarget in value param internalFormat Int32 in value param width SizeI in value param height SizeI in value param depth SizeI in value param format PixelFormat in value param type PixelType in value param level Int32 in value param base Int32 in value param max Int32 in value param data void in reference Build3DMipmaps(target, internalFormat, width, height, depth, format, type, data); return Int32 param target TextureTarget in value param internalFormat Int32 in value param width SizeI in value param height SizeI in value param depth SizeI in value param format PixelFormat in value param type PixelType in value param data void in reference CheckExtension(extName, extString) return Boolean param extName UInt8 in array [COMPSIZE()] param extString UInt8 in array [COMPSIZE()] Cylinder(quad, base, top, height, slices, stacks); return void param quad QuadricObj in value param base Float64 in value param top Float64 in value param height Float64 in value param slices Int32 in value param stacks Int32 in value DeleteNurbsRenderer(nurb) return void param nurb NurbsObj in value DeleteQuadric(quad) return void param quad QuadricObj in value DeleteTess(tess) return void param tess TesselatorObj in value Disk(quad, inner, outer, slices, loops) return void param quad QuadricObj in value param inner Float64 in value param outer Float64 in value param slices Int32 in value param loops Int32 in value EndCurve(nurb) return void param nurb NurbsObj in value EndPolygon(tess) return void param tess TesselatorObj in value EndSurface(nurb) return void param nurb NurbsObj in value EndTrim(nurb) return void param nurb NurbsObj in value ErrorString(error) return String # Revision 1 param error GluErrorCode in value # ErrorCode (clashes with OpenGL enum) GetString(name) return String param name GluStringName in value GetNurbsProperty(nurb, property, data) return void param nurb NurbsObj in value param property NurbsProperty in value param data Float32Pointer out value GetTessProperty(tess, which, data) return void param tess TesselatorObj in value param which TessProperty in value param data Float64Pointer out value LoadSamplingMatrices(nurb, model, perspective, view) return void param nurb NurbsObj in value param model Float32 in array [16] param perspective Float32 in array [16] param view Int32 in array [4] LookAt(eyeX, eyeY, eyeZ, centerX, centerY, centerZ, upX, upY, upZ) return void param eyeX Float64 in value param eyeY Float64 in value param eyeZ Float64 in value param centerX Float64 in value param centerY Float64 in value param centerZ Float64 in value param upX Float64 in value param upY Float64 in value param upZ Float64 in value NewNurbsRenderer() return NurbsObj NewQuadric() return QuadricObj NewTess() return TesselatorObj NextContour(tess, type) return void param tess TesselatorObj in value param type TessContour in value NurbsCallback(nurb, which, CallBackFunc) return void param nurb NurbsObj in value param which NurbsCallback in value param CallBackFunc FunctionPointer in value NurbsCallbackData(nurb, userData) return void param nurb NurbsObj in value param userData VoidPointer in value NurbsCallbackDataEXT(nurb, userData) return void param nurb NurbsObj in value param userData VoidPointer in value NurbsCurve(nurb, knotCount, knots, stride, control, order, type) return void param nurb NurbsObj in value param knotCount Int32 in value param knots Float32 out reference param stride Int32 in value param control Float32 out reference param order Int32 in value param type MapTarget in value NurbsProperty(nurb, property, value) return void param nurb NurbsObj in value param property NurbsProperty in value param value Float32 in value NurbsSurface(nurb, sKnotCount, sKnots, tKnotCount, tKnots, sStride, tStride, control, sOrder, tOrder, type) return void param nurb NurbsObj in value param sKnotCount Int32 in value param sKnots Float32Pointer in value param tKnotCount Int32 in value param tKnots Float32Pointer in value param sStride Int32 in value param tStride Int32 in value param control Float32Pointer in value param sOrder Int32 in value param tOrder Int32 in value param type MapTarget in value Ortho2D(left, right, bottom, top) return void param left Float64 in value param right Float64 in value param bottom Float64 in value param top Float64 in value PartialDisk(quad, inner, outer, slices, loops, start, sweep) return void param quad QuadricObj in value param inner Float64 in value param outer Float64 in value param slices Int32 in value param loops Int32 in value param start Float64 in value param sweep Float64 in value Perspective(fovy, aspect, zNear, zFar) return void param fovy Float64 in value param aspect Float64 in value param zNear Float64 in value param zFar Float64 in value PickMatrix(x, y, delX, delY, viewport) return void param x Float64 in value param y Float64 in value param delX Float64 in value param delY Float64 in value param viewport Int32 out array [4] Project(objX, objY, objZ, model, proj, view, winX, winY, winZ) return Int32 param objX Float64 in value param objY Float64 in value param objZ Float64 in value param model Float64 in array [16] param proj Float64 in array [16] param view Int32 in array [4] param winX Float64Pointer in value param winY Float64Pointer in value param winZ Float64Pointer in value PwlCurve(nurb, count, data, stride, type) return void param nurb NurbsObj in value param count Int32 in value param data Float32Pointer in value param stride Int32 in value param type NurbsTrim in value QuadricCallback(quad, which, CallBackFunc) return void param quad QuadricObj in value param which QuadricCallback in value param CallBackFunc FunctionPointer in value QuadricDrawStyle(quad, draw) return void param quad QuadricObj in value param draw QuadricDrawStyle in value QuadricNormals(quad, normal) return void param quad QuadricObj in value param normal QuadricNormal in value QuadricOrientation(quad, orientation) return void param quad QuadricObj in value param orientation QuadricOrientation in value # Revision 1 QuadricTexture(quad, texture) return void param quad QuadricObj in value param texture bool in value # Boolean in value ScaleImage(format, wIn, hIn, typeIn, dataIn, wOut, hOut, typeOut, dataOut) return Int32 param format PixelFormat in value param wIn SizeI in value param hIn SizeI in value param typeIn PixelType in value param dataIn void in reference param wOut SizeI in value param hOut SizeI in value param typeOut PixelType in value param dataOut VoidPointer out value Sphere(quad, radius, slices, stacks) return void param quad QuadricObj in value param radius Float64 in value param slices Int32 in value param stacks Int32 in value TessBeginContour(tess) return void param tess TesselatorObj in value TessBeginPolygon(tess, data) return void param tess TesselatorObj in value param data VoidPointer in value TessCallback(tess, which, CallBackFunc) return void param tess TesselatorObj in value param which TessCallback in value param CallBackFunc FunctionPointer in value TessEndContour(tess) return void param tess TesselatorObj in value TessEndPolygon(tess) return void param tess TesselatorObj in value TessNormal(tess, valueX, valueY, valueZ) return void param tess TesselatorObj in value param valueX Float64 in value param valueY Float64 in value param valueZ Float64 in value TessProperty(tess, which, data) return void param tess TesselatorObj in value param which TessProperty in value param data Float64 in value TessVertex(tess, location, data) return void param tess TesselatorObj in value param location Float64 out array [3] param data VoidPointer in value TexFilterFuncSGI(target, filtertype, parms, n, weights) return Int32 out value param target TextureTarget in value param filtertype Filter4TypeSGIS in value param parms Float32 in array [2] param n Int32 in value param weights Float32Pointer out value UnProject(winX, winY, winZ, model, proj, view, objX, objY, objZ) return Int32 param winX Float64 in value param winY Float64 in value param winZ Float64 in value param model Float64 in array [16] param proj Float64 in array [16] param view Int32 in array [4] param objX Float64Pointer in value param objY Float64Pointer in value param objZ Float64Pointer in value UnProject4(winX, winY, winZ, clipW, model, proj, view, near, far, objX, objY, objZ, objW) return Int32 param winX Float64 in value param winY Float64 in value param winZ Float64 in value param clipW Float64 in value param model Float64 in array [16] param proj Float64 in array [16] param view Int32 in array [4] param near Float64 in value param far Float64 in value param objX Float64Pointer in value param objY Float64Pointer in value param objZ Float64Pointer in value param objW Float64Pointer in value