From 1ad37309e4f17d73c2f22c3ff4bffe2523abe17c Mon Sep 17 00:00:00 2001 From: Jaeden Amero Date: Thu, 21 Feb 2019 13:15:59 +0000 Subject: [PATCH] Remove irrelevant configs Remove configuration files that are TLS-specific or otherwise not relevant to a pure-crypto library. --- configs/config-ccm-psk-tls1_2.h | 88 - configs/config-default.h | 3377 ----------------------------- configs/config-mini-tls1_1.h | 75 - configs/config-thread.h | 90 - tests/scripts/test-ref-configs.pl | 8 - 5 files changed, 3638 deletions(-) delete mode 100644 configs/config-ccm-psk-tls1_2.h delete mode 100644 configs/config-default.h delete mode 100644 configs/config-mini-tls1_1.h delete mode 100644 configs/config-thread.h diff --git a/configs/config-ccm-psk-tls1_2.h b/configs/config-ccm-psk-tls1_2.h deleted file mode 100644 index c9b58dd53..000000000 --- a/configs/config-ccm-psk-tls1_2.h +++ /dev/null @@ -1,88 +0,0 @@ -/** - * \file config-ccm-psk-tls1_2.h - * - * \brief Minimal configuration for TLS 1.2 with PSK and AES-CCM ciphersuites - */ -/* - * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * This file is part of mbed TLS (https://tls.mbed.org) - */ -/* - * Minimal configuration for TLS 1.2 with PSK and AES-CCM ciphersuites - * Distinguishing features: - * - no bignum, no PK, no X509 - * - fully modern and secure (provided the pre-shared keys have high entropy) - * - very low record overhead with CCM-8 - * - optimized for low RAM usage - * - * See README.txt for usage instructions. - */ -#ifndef MBEDTLS_CONFIG_H -#define MBEDTLS_CONFIG_H - -/* System support */ -//#define MBEDTLS_HAVE_TIME /* Optionally used in Hello messages */ -/* Other MBEDTLS_HAVE_XXX flags irrelevant for this configuration */ - -/* mbed TLS feature support */ -#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED -#define MBEDTLS_SSL_PROTO_TLS1_2 - -/* mbed TLS modules */ -#define MBEDTLS_AES_C -#define MBEDTLS_CCM_C -#define MBEDTLS_CIPHER_C -#define MBEDTLS_CTR_DRBG_C -#define MBEDTLS_ENTROPY_C -#define MBEDTLS_MD_C -#define MBEDTLS_NET_C -#define MBEDTLS_SHA256_C -#define MBEDTLS_SSL_CLI_C -#define MBEDTLS_SSL_SRV_C -#define MBEDTLS_SSL_TLS_C - -/* Save RAM at the expense of ROM */ -#define MBEDTLS_AES_ROM_TABLES - -/* Save some RAM by adjusting to your exact needs */ -#define MBEDTLS_PSK_MAX_LEN 16 /* 128-bits keys are generally enough */ - -/* - * You should adjust this to the exact number of sources you're using: default - * is the "platform_entropy_poll" source, but you may want to add other ones - * Minimum is 2 for the entropy test suite. - */ -#define MBEDTLS_ENTROPY_MAX_SOURCES 2 - -/* - * Use only CCM_8 ciphersuites, and - * save ROM and a few bytes of RAM by specifying our own ciphersuite list - */ -#define MBEDTLS_SSL_CIPHERSUITES \ - MBEDTLS_TLS_PSK_WITH_AES_256_CCM_8, \ - MBEDTLS_TLS_PSK_WITH_AES_128_CCM_8 - -/* - * Save RAM at the expense of interoperability: do this only if you control - * both ends of the connection! (See comments in "mbedtls/ssl.h".) - * The optimal size here depends on the typical size of records. - */ -#define MBEDTLS_SSL_MAX_CONTENT_LEN 1024 - -#include "mbedtls/check_config.h" - -#endif /* MBEDTLS_CONFIG_H */ diff --git a/configs/config-default.h b/configs/config-default.h deleted file mode 100644 index e6abf24d5..000000000 --- a/configs/config-default.h +++ /dev/null @@ -1,3377 +0,0 @@ -/** - * \file config.h - * - * \brief Configuration options (set of defines) - * - * This set of compile-time options may be used to enable - * or disable features selectively, and reduce the global - * memory footprint. - */ -/* - * Copyright (C) 2006-2018, ARM Limited, All Rights Reserved - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * This file is part of mbed TLS (https://tls.mbed.org) - */ - -#ifndef MBEDTLS_CONFIG_H -#define MBEDTLS_CONFIG_H - -#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) -#define _CRT_SECURE_NO_DEPRECATE 1 -#endif - -/** - * \name SECTION: System support - * - * This section sets system specific settings. - * \{ - */ - -/** - * \def MBEDTLS_HAVE_ASM - * - * The compiler has support for asm(). - * - * Requires support for asm() in compiler. - * - * Used in: - * library/aria.c - * library/timing.c - * include/mbedtls/bn_mul.h - * - * Required by: - * MBEDTLS_AESNI_C - * MBEDTLS_PADLOCK_C - * - * Comment to disable the use of assembly code. - */ -#define MBEDTLS_HAVE_ASM - -/** - * \def MBEDTLS_NO_UDBL_DIVISION - * - * The platform lacks support for double-width integer division (64-bit - * division on a 32-bit platform, 128-bit division on a 64-bit platform). - * - * Used in: - * include/mbedtls/bignum.h - * library/bignum.c - * - * The bignum code uses double-width division to speed up some operations. - * Double-width division is often implemented in software that needs to - * be linked with the program. The presence of a double-width integer - * type is usually detected automatically through preprocessor macros, - * but the automatic detection cannot know whether the code needs to - * and can be linked with an implementation of division for that type. - * By default division is assumed to be usable if the type is present. - * Uncomment this option to prevent the use of double-width division. - * - * Note that division for the native integer type is always required. - * Furthermore, a 64-bit type is always required even on a 32-bit - * platform, but it need not support multiplication or division. In some - * cases it is also desirable to disable some double-width operations. For - * example, if double-width division is implemented in software, disabling - * it can reduce code size in some embedded targets. - */ -//#define MBEDTLS_NO_UDBL_DIVISION - -/** - * \def MBEDTLS_NO_64BIT_MULTIPLICATION - * - * The platform lacks support for 32x32 -> 64-bit multiplication. - * - * Used in: - * library/poly1305.c - * - * Some parts of the library may use multiplication of two unsigned 32-bit - * operands with a 64-bit result in order to speed up computations. On some - * platforms, this is not available in hardware and has to be implemented in - * software, usually in a library provided by the toolchain. - * - * Sometimes it is not desirable to have to link to that library. This option - * removes the dependency of that library on platforms that lack a hardware - * 64-bit multiplier by embedding a software implementation in Mbed TLS. - * - * Note that depending on the compiler, this may decrease performance compared - * to using the library function provided by the toolchain. - */ -//#define MBEDTLS_NO_64BIT_MULTIPLICATION - -/** - * \def MBEDTLS_HAVE_SSE2 - * - * CPU supports SSE2 instruction set. - * - * Uncomment if the CPU supports SSE2 (IA-32 specific). - */ -//#define MBEDTLS_HAVE_SSE2 - -/** - * \def MBEDTLS_HAVE_TIME - * - * System has time.h and time(). - * The time does not need to be correct, only time differences are used, - * by contrast with MBEDTLS_HAVE_TIME_DATE - * - * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT, - * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and - * MBEDTLS_PLATFORM_STD_TIME. - * - * Comment if your system does not support time functions - */ -#define MBEDTLS_HAVE_TIME - -/** - * \def MBEDTLS_HAVE_TIME_DATE - * - * System has time.h, time(), and an implementation for - * mbedtls_platform_gmtime_r() (see below). - * The time needs to be correct (not necessarily very accurate, but at least - * the date should be correct). This is used to verify the validity period of - * X.509 certificates. - * - * Comment if your system does not have a correct clock. - * - * \note mbedtls_platform_gmtime_r() is an abstraction in platform_util.h that - * behaves similarly to the gmtime_r() function from the C standard. Refer to - * the documentation for mbedtls_platform_gmtime_r() for more information. - * - * \note It is possible to configure an implementation for - * mbedtls_platform_gmtime_r() at compile-time by using the macro - * MBEDTLS_PLATFORM_GMTIME_R_ALT. - */ -#define MBEDTLS_HAVE_TIME_DATE - -/** - * \def MBEDTLS_PLATFORM_MEMORY - * - * Enable the memory allocation layer. - * - * By default mbed TLS uses the system-provided calloc() and free(). - * This allows different allocators (self-implemented or provided) to be - * provided to the platform abstraction layer. - * - * Enabling MBEDTLS_PLATFORM_MEMORY without the - * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide - * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and - * free() function pointer at runtime. - * - * Enabling MBEDTLS_PLATFORM_MEMORY and specifying - * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the - * alternate function at compile time. - * - * Requires: MBEDTLS_PLATFORM_C - * - * Enable this layer to allow use of alternative memory allocators. - */ -//#define MBEDTLS_PLATFORM_MEMORY - -/** - * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS - * - * Do not assign standard functions in the platform layer (e.g. calloc() to - * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF) - * - * This makes sure there are no linking errors on platforms that do not support - * these functions. You will HAVE to provide alternatives, either at runtime - * via the platform_set_xxx() functions or at compile time by setting - * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a - * MBEDTLS_PLATFORM_XXX_MACRO. - * - * Requires: MBEDTLS_PLATFORM_C - * - * Uncomment to prevent default assignment of standard functions in the - * platform layer. - */ -//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS - -/** - * \def MBEDTLS_PLATFORM_EXIT_ALT - * - * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the - * function in the platform abstraction layer. - * - * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will - * provide a function "mbedtls_platform_set_printf()" that allows you to set an - * alternative printf function pointer. - * - * All these define require MBEDTLS_PLATFORM_C to be defined! - * - * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows; - * it will be enabled automatically by check_config.h - * - * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as - * MBEDTLS_PLATFORM_XXX_MACRO! - * - * Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME - * - * Uncomment a macro to enable alternate implementation of specific base - * platform function - */ -//#define MBEDTLS_PLATFORM_EXIT_ALT -//#define MBEDTLS_PLATFORM_TIME_ALT -//#define MBEDTLS_PLATFORM_FPRINTF_ALT -//#define MBEDTLS_PLATFORM_PRINTF_ALT -//#define MBEDTLS_PLATFORM_SNPRINTF_ALT -//#define MBEDTLS_PLATFORM_VSNPRINTF_ALT -//#define MBEDTLS_PLATFORM_NV_SEED_ALT -//#define MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT - -/** - * \def MBEDTLS_DEPRECATED_WARNING - * - * Mark deprecated functions so that they generate a warning if used. - * Functions deprecated in one version will usually be removed in the next - * version. You can enable this to help you prepare the transition to a new - * major version by making sure your code is not using these functions. - * - * This only works with GCC and Clang. With other compilers, you may want to - * use MBEDTLS_DEPRECATED_REMOVED - * - * Uncomment to get warnings on using deprecated functions. - */ -//#define MBEDTLS_DEPRECATED_WARNING - -/** - * \def MBEDTLS_DEPRECATED_REMOVED - * - * Remove deprecated functions so that they generate an error if used. - * Functions deprecated in one version will usually be removed in the next - * version. You can enable this to help you prepare the transition to a new - * major version by making sure your code is not using these functions. - * - * Uncomment to get errors on using deprecated functions. - */ -//#define MBEDTLS_DEPRECATED_REMOVED - -/** - * \def MBEDTLS_CHECK_PARAMS - * - * This configuration option controls whether the library validates more of - * the parameters passed to it. - * - * When this flag is not defined, the library only attempts to validate an - * input parameter if: (1) they may come from the outside world (such as the - * network, the filesystem, etc.) or (2) not validating them could result in - * internal memory errors such as overflowing a buffer controlled by the - * library. On the other hand, it doesn't attempt to validate parameters whose - * values are fully controlled by the application (such as pointers). - * - * When this flag is defined, the library additionally attempts to validate - * parameters that are fully controlled by the application, and should always - * be valid if the application code is fully correct and trusted. - * - * For example, when a function accepts as input a pointer to a buffer that may - * contain untrusted data, and its documentation mentions that this pointer - * must not be NULL: - * - the pointer is checked to be non-NULL only if this option is enabled - * - the content of the buffer is always validated - * - * When this flag is defined, if a library function receives a parameter that - * is invalid, it will: - * - invoke the macro MBEDTLS_PARAM_FAILED() which by default expands to a - * call to the function mbedtls_param_failed() - * - immediately return (with a specific error code unless the function - * returns void and can't communicate an error). - * - * When defining this flag, you also need to: - * - either provide a definition of the function mbedtls_param_failed() in - * your application (see platform_util.h for its prototype) as the library - * calls that function, but does not provide a default definition for it, - * - or provide a different definition of the macro MBEDTLS_PARAM_FAILED() - * below if the above mechanism is not flexible enough to suit your needs. - * See the documentation of this macro later in this file. - * - * Uncomment to enable validation of application-controlled parameters. - */ -//#define MBEDTLS_CHECK_PARAMS - -/* \} name SECTION: System support */ - -/** - * \name SECTION: mbed TLS feature support - * - * This section sets support for features that are or are not needed - * within the modules that are enabled. - * \{ - */ - -/** - * \def MBEDTLS_TIMING_ALT - * - * Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(), - * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay() - * - * Only works if you have MBEDTLS_TIMING_C enabled. - * - * You will need to provide a header "timing_alt.h" and an implementation at - * compile time. - */ -//#define MBEDTLS_TIMING_ALT - -/** - * \def MBEDTLS_AES_ALT - * - * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your - * alternate core implementation of a symmetric crypto, an arithmetic or hash - * module (e.g. platform specific assembly optimized implementations). Keep - * in mind that the function prototypes should remain the same. - * - * This replaces the whole module. If you only want to replace one of the - * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags. - * - * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer - * provide the "struct mbedtls_aes_context" definition and omit the base - * function declarations and implementations. "aes_alt.h" will be included from - * "aes.h" to include the new function definitions. - * - * Uncomment a macro to enable alternate implementation of the corresponding - * module. - * - * \warning MD2, MD4, MD5, ARC4, DES and SHA-1 are considered weak and their - * use constitutes a security risk. If possible, we recommend - * avoiding dependencies on them, and considering stronger message - * digests and ciphers instead. - * - */ -//#define MBEDTLS_AES_ALT -//#define MBEDTLS_ARC4_ALT -//#define MBEDTLS_ARIA_ALT -//#define MBEDTLS_BLOWFISH_ALT -//#define MBEDTLS_CAMELLIA_ALT -//#define MBEDTLS_CCM_ALT -//#define MBEDTLS_CHACHA20_ALT -//#define MBEDTLS_CHACHAPOLY_ALT -//#define MBEDTLS_CMAC_ALT -//#define MBEDTLS_DES_ALT -//#define MBEDTLS_DHM_ALT -//#define MBEDTLS_ECJPAKE_ALT -//#define MBEDTLS_GCM_ALT -//#define MBEDTLS_NIST_KW_ALT -//#define MBEDTLS_MD2_ALT -//#define MBEDTLS_MD4_ALT -//#define MBEDTLS_MD5_ALT -//#define MBEDTLS_POLY1305_ALT -//#define MBEDTLS_RIPEMD160_ALT -//#define MBEDTLS_RSA_ALT -//#define MBEDTLS_SHA1_ALT -//#define MBEDTLS_SHA256_ALT -//#define MBEDTLS_SHA512_ALT -//#define MBEDTLS_XTEA_ALT - -/* - * When replacing the elliptic curve module, pleace consider, that it is - * implemented with two .c files: - * - ecp.c - * - ecp_curves.c - * You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT - * macros as described above. The only difference is that you have to make sure - * that you provide functionality for both .c files. - */ -//#define MBEDTLS_ECP_ALT - -/** - * \def MBEDTLS_MD2_PROCESS_ALT - * - * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you - * alternate core implementation of symmetric crypto or hash function. Keep in - * mind that function prototypes should remain the same. - * - * This replaces only one function. The header file from mbed TLS is still - * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags. - * - * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will - * no longer provide the mbedtls_sha1_process() function, but it will still provide - * the other function (using your mbedtls_sha1_process() function) and the definition - * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible - * with this definition. - * - * \note Because of a signature change, the core AES encryption and decryption routines are - * currently named mbedtls_aes_internal_encrypt and mbedtls_aes_internal_decrypt, - * respectively. When setting up alternative implementations, these functions should - * be overridden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt - * must stay untouched. - * - * \note If you use the AES_xxx_ALT macros, then is is recommended to also set - * MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES - * tables. - * - * Uncomment a macro to enable alternate implementation of the corresponding - * function. - * - * \warning MD2, MD4, MD5, DES and SHA-1 are considered weak and their use - * constitutes a security risk. If possible, we recommend avoiding - * dependencies on them, and considering stronger message digests - * and ciphers instead. - * - */ -//#define MBEDTLS_MD2_PROCESS_ALT -//#define MBEDTLS_MD4_PROCESS_ALT -//#define MBEDTLS_MD5_PROCESS_ALT -//#define MBEDTLS_RIPEMD160_PROCESS_ALT -//#define MBEDTLS_SHA1_PROCESS_ALT -//#define MBEDTLS_SHA256_PROCESS_ALT -//#define MBEDTLS_SHA512_PROCESS_ALT -//#define MBEDTLS_DES_SETKEY_ALT -//#define MBEDTLS_DES_CRYPT_ECB_ALT -//#define MBEDTLS_DES3_CRYPT_ECB_ALT -//#define MBEDTLS_AES_SETKEY_ENC_ALT -//#define MBEDTLS_AES_SETKEY_DEC_ALT -//#define MBEDTLS_AES_ENCRYPT_ALT -//#define MBEDTLS_AES_DECRYPT_ALT -//#define MBEDTLS_ECDH_GEN_PUBLIC_ALT -//#define MBEDTLS_ECDH_COMPUTE_SHARED_ALT -//#define MBEDTLS_ECDSA_VERIFY_ALT -//#define MBEDTLS_ECDSA_SIGN_ALT -//#define MBEDTLS_ECDSA_GENKEY_ALT - -/** - * \def MBEDTLS_ECP_INTERNAL_ALT - * - * Expose a part of the internal interface of the Elliptic Curve Point module. - * - * MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use your - * alternative core implementation of elliptic curve arithmetic. Keep in mind - * that function prototypes should remain the same. - * - * This partially replaces one function. The header file from mbed TLS is still - * used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation - * is still present and it is used for group structures not supported by the - * alternative. - * - * Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT - * and implementing the following functions: - * unsigned char mbedtls_internal_ecp_grp_capable( - * const mbedtls_ecp_group *grp ) - * int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp ) - * void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp ) - * The mbedtls_internal_ecp_grp_capable function should return 1 if the - * replacement functions implement arithmetic for the given group and 0 - * otherwise. - * The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_free are - * called before and after each point operation and provide an opportunity to - * implement optimized set up and tear down instructions. - * - * Example: In case you uncomment MBEDTLS_ECP_INTERNAL_ALT and - * MBEDTLS_ECP_DOUBLE_JAC_ALT, mbed TLS will still provide the ecp_double_jac - * function, but will use your mbedtls_internal_ecp_double_jac if the group is - * supported (your mbedtls_internal_ecp_grp_capable function returns 1 when - * receives it as an argument). If the group is not supported then the original - * implementation is used. The other functions and the definition of - * mbedtls_ecp_group and mbedtls_ecp_point will not change, so your - * implementation of mbedtls_internal_ecp_double_jac and - * mbedtls_internal_ecp_grp_capable must be compatible with this definition. - * - * Uncomment a macro to enable alternate implementation of the corresponding - * function. - */ -/* Required for all the functions in this section */ -//#define MBEDTLS_ECP_INTERNAL_ALT -/* Support for Weierstrass curves with Jacobi representation */ -//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT -//#define MBEDTLS_ECP_ADD_MIXED_ALT -//#define MBEDTLS_ECP_DOUBLE_JAC_ALT -//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT -//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT -/* Support for curves with Montgomery arithmetic */ -//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT -//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT -//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT - -/** - * \def MBEDTLS_TEST_NULL_ENTROPY - * - * Enables testing and use of mbed TLS without any configured entropy sources. - * This permits use of the library on platforms before an entropy source has - * been integrated (see for example the MBEDTLS_ENTROPY_HARDWARE_ALT or the - * MBEDTLS_ENTROPY_NV_SEED switches). - * - * WARNING! This switch MUST be disabled in production builds, and is suitable - * only for development. - * Enabling the switch negates any security provided by the library. - * - * Requires MBEDTLS_ENTROPY_C, MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES - * - */ -//#define MBEDTLS_TEST_NULL_ENTROPY - -/** - * \def MBEDTLS_ENTROPY_HARDWARE_ALT - * - * Uncomment this macro to let mbed TLS use your own implementation of a - * hardware entropy collector. - * - * Your function must be called \c mbedtls_hardware_poll(), have the same - * prototype as declared in entropy_poll.h, and accept NULL as first argument. - * - * Uncomment to use your own hardware entropy collector. - */ -//#define MBEDTLS_ENTROPY_HARDWARE_ALT - -/** - * \def MBEDTLS_AES_ROM_TABLES - * - * Use precomputed AES tables stored in ROM. - * - * Uncomment this macro to use precomputed AES tables stored in ROM. - * Comment this macro to generate AES tables in RAM at runtime. - * - * Tradeoff: Using precomputed ROM tables reduces RAM usage by ~8kb - * (or ~2kb if \c MBEDTLS_AES_FEWER_TABLES is used) and reduces the - * initialization time before the first AES operation can be performed. - * It comes at the cost of additional ~8kb ROM use (resp. ~2kb if \c - * MBEDTLS_AES_FEWER_TABLES below is used), and potentially degraded - * performance if ROM access is slower than RAM access. - * - * This option is independent of \c MBEDTLS_AES_FEWER_TABLES. - * - */ -//#define MBEDTLS_AES_ROM_TABLES - -/** - * \def MBEDTLS_AES_FEWER_TABLES - * - * Use less ROM/RAM for AES tables. - * - * Uncommenting this macro omits 75% of the AES tables from - * ROM / RAM (depending on the value of \c MBEDTLS_AES_ROM_TABLES) - * by computing their values on the fly during operations - * (the tables are entry-wise rotations of one another). - * - * Tradeoff: Uncommenting this reduces the RAM / ROM footprint - * by ~6kb but at the cost of more arithmetic operations during - * runtime. Specifically, one has to compare 4 accesses within - * different tables to 4 accesses with additional arithmetic - * operations within the same table. The performance gain/loss - * depends on the system and memory details. - * - * This option is independent of \c MBEDTLS_AES_ROM_TABLES. - * - */ -//#define MBEDTLS_AES_FEWER_TABLES - -/** - * \def MBEDTLS_CAMELLIA_SMALL_MEMORY - * - * Use less ROM for the Camellia implementation (saves about 768 bytes). - * - * Uncomment this macro to use less memory for Camellia. - */ -//#define MBEDTLS_CAMELLIA_SMALL_MEMORY - -/** - * \def MBEDTLS_CIPHER_MODE_CBC - * - * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. - */ -#define MBEDTLS_CIPHER_MODE_CBC - -/** - * \def MBEDTLS_CIPHER_MODE_CFB - * - * Enable Cipher Feedback mode (CFB) for symmetric ciphers. - */ -#define MBEDTLS_CIPHER_MODE_CFB - -/** - * \def MBEDTLS_CIPHER_MODE_CTR - * - * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. - */ -#define MBEDTLS_CIPHER_MODE_CTR - -/** - * \def MBEDTLS_CIPHER_MODE_OFB - * - * Enable Output Feedback mode (OFB) for symmetric ciphers. - */ -#define MBEDTLS_CIPHER_MODE_OFB - -/** - * \def MBEDTLS_CIPHER_MODE_XTS - * - * Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES. - */ -#define MBEDTLS_CIPHER_MODE_XTS - -/** - * \def MBEDTLS_CIPHER_NULL_CIPHER - * - * Enable NULL cipher. - * Warning: Only do so when you know what you are doing. This allows for - * encryption or channels without any security! - * - * Requires MBEDTLS_ENABLE_WEAK_CIPHERSUITES as well to enable - * the following ciphersuites: - * MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA - * MBEDTLS_TLS_RSA_WITH_NULL_SHA256 - * MBEDTLS_TLS_RSA_WITH_NULL_SHA - * MBEDTLS_TLS_RSA_WITH_NULL_MD5 - * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA - * MBEDTLS_TLS_PSK_WITH_NULL_SHA384 - * MBEDTLS_TLS_PSK_WITH_NULL_SHA256 - * MBEDTLS_TLS_PSK_WITH_NULL_SHA - * - * Uncomment this macro to enable the NULL cipher and ciphersuites - */ -//#define MBEDTLS_CIPHER_NULL_CIPHER - -/** - * \def MBEDTLS_CIPHER_PADDING_PKCS7 - * - * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for - * specific padding modes in the cipher layer with cipher modes that support - * padding (e.g. CBC) - * - * If you disable all padding modes, only full blocks can be used with CBC. - * - * Enable padding modes in the cipher layer. - */ -#define MBEDTLS_CIPHER_PADDING_PKCS7 -#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS -#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN -#define MBEDTLS_CIPHER_PADDING_ZEROS - -/** - * \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES - * - * Enable weak ciphersuites in SSL / TLS. - * Warning: Only do so when you know what you are doing. This allows for - * channels with virtually no security at all! - * - * This enables the following ciphersuites: - * MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA - * - * Uncomment this macro to enable weak ciphersuites - * - * \warning DES is considered a weak cipher and its use constitutes a - * security risk. We recommend considering stronger ciphers instead. - */ -//#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES - -/** - * \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES - * - * Remove RC4 ciphersuites by default in SSL / TLS. - * This flag removes the ciphersuites based on RC4 from the default list as - * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to - * enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them - * explicitly. - * - * Uncomment this macro to remove RC4 ciphersuites by default. - */ -#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES - -/** - * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED - * - * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve - * module. By default all supported curves are enabled. - * - * Comment macros to disable the curve and functions for it - */ -#define MBEDTLS_ECP_DP_SECP192R1_ENABLED -#define MBEDTLS_ECP_DP_SECP224R1_ENABLED -#define MBEDTLS_ECP_DP_SECP256R1_ENABLED -#define MBEDTLS_ECP_DP_SECP384R1_ENABLED -#define MBEDTLS_ECP_DP_SECP521R1_ENABLED -#define MBEDTLS_ECP_DP_SECP192K1_ENABLED -#define MBEDTLS_ECP_DP_SECP224K1_ENABLED -#define MBEDTLS_ECP_DP_SECP256K1_ENABLED -#define MBEDTLS_ECP_DP_BP256R1_ENABLED -#define MBEDTLS_ECP_DP_BP384R1_ENABLED -#define MBEDTLS_ECP_DP_BP512R1_ENABLED -#define MBEDTLS_ECP_DP_CURVE25519_ENABLED -#define MBEDTLS_ECP_DP_CURVE448_ENABLED - -/** - * \def MBEDTLS_ECP_NIST_OPTIM - * - * Enable specific 'modulo p' routines for each NIST prime. - * Depending on the prime and architecture, makes operations 4 to 8 times - * faster on the corresponding curve. - * - * Comment this macro to disable NIST curves optimisation. - */ -#define MBEDTLS_ECP_NIST_OPTIM - -/** - * \def MBEDTLS_ECP_RESTARTABLE - * - * Enable "non-blocking" ECC operations that can return early and be resumed. - * - * This allows various functions to pause by returning - * #MBEDTLS_ERR_ECP_IN_PROGRESS (or, for functions in the SSL module, - * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS) and then be called later again in - * order to further progress and eventually complete their operation. This is - * controlled through mbedtls_ecp_set_max_ops() which limits the maximum - * number of ECC operations a function may perform before pausing; see - * mbedtls_ecp_set_max_ops() for more information. - * - * This is useful in non-threaded environments if you want to avoid blocking - * for too long on ECC (and, hence, X.509 or SSL/TLS) operations. - * - * Uncomment this macro to enable restartable ECC computations. - * - * \note This option only works with the default software implementation of - * elliptic curve functionality. It is incompatible with - * MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT and MBEDTLS_ECDSA_XXX_ALT. - */ -//#define MBEDTLS_ECP_RESTARTABLE - -/** - * \def MBEDTLS_ECDSA_DETERMINISTIC - * - * Enable deterministic ECDSA (RFC 6979). - * Standard ECDSA is "fragile" in the sense that lack of entropy when signing - * may result in a compromise of the long-term signing key. This is avoided by - * the deterministic variant. - * - * Requires: MBEDTLS_HMAC_DRBG_C - * - * Comment this macro to disable deterministic ECDSA. - */ -#define MBEDTLS_ECDSA_DETERMINISTIC - -/** - * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED - * - * Enable the PSK based ciphersuite modes in SSL / TLS. - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA - */ -#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED - * - * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_DHM_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA - * - * \warning Using DHE constitutes a security risk as it - * is not possible to validate custom DH parameters. - * If possible, it is recommended users should consider - * preferring other methods of key exchange. - * See dhm.h for more details. - * - */ -#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED - * - * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA - */ -#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED - * - * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, - * MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA - */ -#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED - * - * Enable the RSA-only based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, - * MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 - */ -#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED - * - * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, - * MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA - * - * \warning Using DHE constitutes a security risk as it - * is not possible to validate custom DH parameters. - * If possible, it is recommended users should consider - * preferring other methods of key exchange. - * See dhm.h for more details. - * - */ -#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED - * - * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, - * MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA - */ -#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED - * - * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C, - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA - */ -#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED - * - * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - */ -#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED - * - * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 - */ -#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED - * - * Enable the ECJPAKE based ciphersuite modes in SSL / TLS. - * - * \warning This is currently experimental. EC J-PAKE support is based on the - * Thread v1.0.0 specification; incompatible changes to the specification - * might still happen. For this reason, this is disabled by default. - * - * Requires: MBEDTLS_ECJPAKE_C - * MBEDTLS_SHA256_C - * MBEDTLS_ECP_DP_SECP256R1_ENABLED - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 - */ -//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED - -/** - * \def MBEDTLS_PK_PARSE_EC_EXTENDED - * - * Enhance support for reading EC keys using variants of SEC1 not allowed by - * RFC 5915 and RFC 5480. - * - * Currently this means parsing the SpecifiedECDomain choice of EC - * parameters (only known groups are supported, not arbitrary domains, to - * avoid validation issues). - * - * Disable if you only need to support RFC 5915 + 5480 key formats. - */ -#define MBEDTLS_PK_PARSE_EC_EXTENDED - -/** - * \def MBEDTLS_ERROR_STRERROR_DUMMY - * - * Enable a dummy error function to make use of mbedtls_strerror() in - * third party libraries easier when MBEDTLS_ERROR_C is disabled - * (no effect when MBEDTLS_ERROR_C is enabled). - * - * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're - * not using mbedtls_strerror() or error_strerror() in your application. - * - * Disable if you run into name conflicts and want to really remove the - * mbedtls_strerror() - */ -#define MBEDTLS_ERROR_STRERROR_DUMMY - -/** - * \def MBEDTLS_GENPRIME - * - * Enable the prime-number generation code. - * - * Requires: MBEDTLS_BIGNUM_C - */ -#define MBEDTLS_GENPRIME - -/** - * \def MBEDTLS_FS_IO - * - * Enable functions that use the filesystem. - */ -#define MBEDTLS_FS_IO - -/** - * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES - * - * Do not add default entropy sources. These are the platform specific, - * mbedtls_timing_hardclock and HAVEGE based poll functions. - * - * This is useful to have more control over the added entropy sources in an - * application. - * - * Uncomment this macro to prevent loading of default entropy functions. - */ -//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES - -/** - * \def MBEDTLS_NO_PLATFORM_ENTROPY - * - * Do not use built-in platform entropy functions. - * This is useful if your platform does not support - * standards like the /dev/urandom or Windows CryptoAPI. - * - * Uncomment this macro to disable the built-in platform entropy functions. - */ -//#define MBEDTLS_NO_PLATFORM_ENTROPY - -/** - * \def MBEDTLS_ENTROPY_FORCE_SHA256 - * - * Force the entropy accumulator to use a SHA-256 accumulator instead of the - * default SHA-512 based one (if both are available). - * - * Requires: MBEDTLS_SHA256_C - * - * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option - * if you have performance concerns. - * - * This option is only useful if both MBEDTLS_SHA256_C and - * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used. - */ -//#define MBEDTLS_ENTROPY_FORCE_SHA256 - -/** - * \def MBEDTLS_ENTROPY_NV_SEED - * - * Enable the non-volatile (NV) seed file-based entropy source. - * (Also enables the NV seed read/write functions in the platform layer) - * - * This is crucial (if not required) on systems that do not have a - * cryptographic entropy source (in hardware or kernel) available. - * - * Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C - * - * \note The read/write functions that are used by the entropy source are - * determined in the platform layer, and can be modified at runtime and/or - * compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used. - * - * \note If you use the default implementation functions that read a seedfile - * with regular fopen(), please make sure you make a seedfile with the - * proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at - * least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from - * and written to or you will get an entropy source error! The default - * implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE - * bytes from the file. - * - * \note The entropy collector will write to the seed file before entropy is - * given to an external source, to update it. - */ -//#define MBEDTLS_ENTROPY_NV_SEED - -/** - * \def MBEDTLS_MEMORY_DEBUG - * - * Enable debugging of buffer allocator memory issues. Automatically prints - * (to stderr) all (fatal) messages on memory allocation issues. Enables - * function for 'debug output' of allocated memory. - * - * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C - * - * Uncomment this macro to let the buffer allocator print out error messages. - */ -//#define MBEDTLS_MEMORY_DEBUG - -/** - * \def MBEDTLS_MEMORY_BACKTRACE - * - * Include backtrace information with each allocated block. - * - * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C - * GLIBC-compatible backtrace() an backtrace_symbols() support - * - * Uncomment this macro to include backtrace information - */ -//#define MBEDTLS_MEMORY_BACKTRACE - -/** - * \def MBEDTLS_PK_RSA_ALT_SUPPORT - * - * Support external private RSA keys (eg from a HSM) in the PK layer. - * - * Comment this macro to disable support for external private RSA keys. - */ -#define MBEDTLS_PK_RSA_ALT_SUPPORT - -/** - * \def MBEDTLS_PKCS1_V15 - * - * Enable support for PKCS#1 v1.5 encoding. - * - * Requires: MBEDTLS_RSA_C - * - * This enables support for PKCS#1 v1.5 operations. - */ -#define MBEDTLS_PKCS1_V15 - -/** - * \def MBEDTLS_PKCS1_V21 - * - * Enable support for PKCS#1 v2.1 encoding. - * - * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C - * - * This enables support for RSAES-OAEP and RSASSA-PSS operations. - */ -#define MBEDTLS_PKCS1_V21 - -/** - * \def MBEDTLS_PSA_CRYPTO_SPM - * - * When MBEDTLS_PSA_CRYPTO_SPM is defined, the code is built for SPM (Secure - * Partition Manager) integration which separates the code into two parts: a - * NSPE (Non-Secure Process Environment) and an SPE (Secure Process - * Environment). - * - * Module: library/psa_crypto.c - * Requires: MBEDTLS_PSA_CRYPTO_C - * - */ -//#define MBEDTLS_PSA_CRYPTO_SPM - -/** - * \def MBEDTLS_PSA_HAS_ITS_IO - * - * Enable the non-volatile secure storage usage. - * - * This is crucial on systems that do not have a HW TRNG support. - * - */ -//#define MBEDTLS_PSA_HAS_ITS_IO - -/** - * \def MBEDTLS_RSA_NO_CRT - * - * Do not use the Chinese Remainder Theorem - * for the RSA private operation. - * - * Uncomment this macro to disable the use of CRT in RSA. - * - */ -//#define MBEDTLS_RSA_NO_CRT - -/** - * \def MBEDTLS_SELF_TEST - * - * Enable the checkup functions (*_self_test). - */ -#define MBEDTLS_SELF_TEST - -/** - * \def MBEDTLS_SHA256_SMALLER - * - * Enable an implementation of SHA-256 that has lower ROM footprint but also - * lower performance. - * - * The default implementation is meant to be a reasonnable compromise between - * performance and size. This version optimizes more aggressively for size at - * the expense of performance. Eg on Cortex-M4 it reduces the size of - * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about - * 30%. - * - * Uncomment to enable the smaller implementation of SHA256. - */ -//#define MBEDTLS_SHA256_SMALLER - -/** - * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES - * - * Enable sending of alert messages in case of encountered errors as per RFC. - * If you choose not to send the alert messages, mbed TLS can still communicate - * with other servers, only debugging of failures is harder. - * - * The advantage of not sending alert messages, is that no information is given - * about reasons for failures thus preventing adversaries of gaining intel. - * - * Enable sending of all alert messages - */ -#define MBEDTLS_SSL_ALL_ALERT_MESSAGES - -/** - * \def MBEDTLS_SSL_ASYNC_PRIVATE - * - * Enable asynchronous external private key operations in SSL. This allows - * you to configure an SSL connection to call an external cryptographic - * module to perform private key operations instead of performing the - * operation inside the library. - * - */ -//#define MBEDTLS_SSL_ASYNC_PRIVATE - -/** - * \def MBEDTLS_SSL_DEBUG_ALL - * - * Enable the debug messages in SSL module for all issues. - * Debug messages have been disabled in some places to prevent timing - * attacks due to (unbalanced) debugging function calls. - * - * If you need all error reporting you should enable this during debugging, - * but remove this for production servers that should log as well. - * - * Uncomment this macro to report all debug messages on errors introducing - * a timing side-channel. - * - */ -//#define MBEDTLS_SSL_DEBUG_ALL - -/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC - * - * Enable support for Encrypt-then-MAC, RFC 7366. - * - * This allows peers that both support it to use a more robust protection for - * ciphersuites using CBC, providing deep resistance against timing attacks - * on the padding or underlying cipher. - * - * This only affects CBC ciphersuites, and is useless if none is defined. - * - * Requires: MBEDTLS_SSL_PROTO_TLS1 or - * MBEDTLS_SSL_PROTO_TLS1_1 or - * MBEDTLS_SSL_PROTO_TLS1_2 - * - * Comment this macro to disable support for Encrypt-then-MAC - */ -#define MBEDTLS_SSL_ENCRYPT_THEN_MAC - -/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET - * - * Enable support for Extended Master Secret, aka Session Hash - * (draft-ietf-tls-session-hash-02). - * - * This was introduced as "the proper fix" to the Triple Handshake familiy of - * attacks, but it is recommended to always use it (even if you disable - * renegotiation), since it actually fixes a more fundamental issue in the - * original SSL/TLS design, and has implications beyond Triple Handshake. - * - * Requires: MBEDTLS_SSL_PROTO_TLS1 or - * MBEDTLS_SSL_PROTO_TLS1_1 or - * MBEDTLS_SSL_PROTO_TLS1_2 - * - * Comment this macro to disable support for Extended Master Secret. - */ -#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET - -/** - * \def MBEDTLS_SSL_FALLBACK_SCSV - * - * Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00). - * - * For servers, it is recommended to always enable this, unless you support - * only one version of TLS, or know for sure that none of your clients - * implements a fallback strategy. - * - * For clients, you only need this if you're using a fallback strategy, which - * is not recommended in the first place, unless you absolutely need it to - * interoperate with buggy (version-intolerant) servers. - * - * Comment this macro to disable support for FALLBACK_SCSV - */ -#define MBEDTLS_SSL_FALLBACK_SCSV - -/** - * \def MBEDTLS_SSL_HW_RECORD_ACCEL - * - * Enable hooking functions in SSL module for hardware acceleration of - * individual records. - * - * Uncomment this macro to enable hooking functions. - */ -//#define MBEDTLS_SSL_HW_RECORD_ACCEL - -/** - * \def MBEDTLS_SSL_CBC_RECORD_SPLITTING - * - * Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0. - * - * This is a countermeasure to the BEAST attack, which also minimizes the risk - * of interoperability issues compared to sending 0-length records. - * - * Comment this macro to disable 1/n-1 record splitting. - */ -#define MBEDTLS_SSL_CBC_RECORD_SPLITTING - -/** - * \def MBEDTLS_SSL_RENEGOTIATION - * - * Enable support for TLS renegotiation. - * - * The two main uses of renegotiation are (1) refresh keys on long-lived - * connections and (2) client authentication after the initial handshake. - * If you don't need renegotiation, it's probably better to disable it, since - * it has been associated with security issues in the past and is easy to - * misuse/misunderstand. - * - * Comment this to disable support for renegotiation. - * - * \note Even if this option is disabled, both client and server are aware - * of the Renegotiation Indication Extension (RFC 5746) used to - * prevent the SSL renegotiation attack (see RFC 5746 Sect. 1). - * (See \c mbedtls_ssl_conf_legacy_renegotiation for the - * configuration of this extension). - * - */ -#define MBEDTLS_SSL_RENEGOTIATION - -/** - * \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO - * - * Enable support for receiving and parsing SSLv2 Client Hello messages for the - * SSL Server module (MBEDTLS_SSL_SRV_C). - * - * Uncomment this macro to enable support for SSLv2 Client Hello messages. - */ -//#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO - -/** - * \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE - * - * Pick the ciphersuite according to the client's preferences rather than ours - * in the SSL Server module (MBEDTLS_SSL_SRV_C). - * - * Uncomment this macro to respect client's ciphersuite order - */ -//#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE - -/** - * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH - * - * Enable support for RFC 6066 max_fragment_length extension in SSL. - * - * Comment this macro to disable support for the max_fragment_length extension - */ -#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH - -/** - * \def MBEDTLS_SSL_PROTO_SSL3 - * - * Enable support for SSL 3.0. - * - * Requires: MBEDTLS_MD5_C - * MBEDTLS_SHA1_C - * - * Comment this macro to disable support for SSL 3.0 - */ -//#define MBEDTLS_SSL_PROTO_SSL3 - -/** - * \def MBEDTLS_SSL_PROTO_TLS1 - * - * Enable support for TLS 1.0. - * - * Requires: MBEDTLS_MD5_C - * MBEDTLS_SHA1_C - * - * Comment this macro to disable support for TLS 1.0 - */ -#define MBEDTLS_SSL_PROTO_TLS1 - -/** - * \def MBEDTLS_SSL_PROTO_TLS1_1 - * - * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled). - * - * Requires: MBEDTLS_MD5_C - * MBEDTLS_SHA1_C - * - * Comment this macro to disable support for TLS 1.1 / DTLS 1.0 - */ -#define MBEDTLS_SSL_PROTO_TLS1_1 - -/** - * \def MBEDTLS_SSL_PROTO_TLS1_2 - * - * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled). - * - * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C - * (Depends on ciphersuites) - * - * Comment this macro to disable support for TLS 1.2 / DTLS 1.2 - */ -#define MBEDTLS_SSL_PROTO_TLS1_2 - -/** - * \def MBEDTLS_SSL_PROTO_DTLS - * - * Enable support for DTLS (all available versions). - * - * Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0, - * and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2. - * - * Requires: MBEDTLS_SSL_PROTO_TLS1_1 - * or MBEDTLS_SSL_PROTO_TLS1_2 - * - * Comment this macro to disable support for DTLS - */ -#define MBEDTLS_SSL_PROTO_DTLS - -/** - * \def MBEDTLS_SSL_ALPN - * - * Enable support for RFC 7301 Application Layer Protocol Negotiation. - * - * Comment this macro to disable support for ALPN. - */ -#define MBEDTLS_SSL_ALPN - -/** - * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY - * - * Enable support for the anti-replay mechanism in DTLS. - * - * Requires: MBEDTLS_SSL_TLS_C - * MBEDTLS_SSL_PROTO_DTLS - * - * \warning Disabling this is often a security risk! - * See mbedtls_ssl_conf_dtls_anti_replay() for details. - * - * Comment this to disable anti-replay in DTLS. - */ -#define MBEDTLS_SSL_DTLS_ANTI_REPLAY - -/** - * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY - * - * Enable support for HelloVerifyRequest on DTLS servers. - * - * This feature is highly recommended to prevent DTLS servers being used as - * amplifiers in DoS attacks against other hosts. It should always be enabled - * unless you know for sure amplification cannot be a problem in the - * environment in which your server operates. - * - * \warning Disabling this can ba a security risk! (see above) - * - * Requires: MBEDTLS_SSL_PROTO_DTLS - * - * Comment this to disable support for HelloVerifyRequest. - */ -#define MBEDTLS_SSL_DTLS_HELLO_VERIFY - -/** - * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE - * - * Enable server-side support for clients that reconnect from the same port. - * - * Some clients unexpectedly close the connection and try to reconnect using the - * same source port. This needs special support from the server to handle the - * new connection securely, as described in section 4.2.8 of RFC 6347. This - * flag enables that support. - * - * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY - * - * Comment this to disable support for clients reusing the source port. - */ -#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE - -/** - * \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT - * - * Enable support for a limit of records with bad MAC. - * - * See mbedtls_ssl_conf_dtls_badmac_limit(). - * - * Requires: MBEDTLS_SSL_PROTO_DTLS - */ -#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT - -/** - * \def MBEDTLS_SSL_SESSION_TICKETS - * - * Enable support for RFC 5077 session tickets in SSL. - * Client-side, provides full support for session tickets (maintenance of a - * session store remains the responsibility of the application, though). - * Server-side, you also need to provide callbacks for writing and parsing - * tickets, including authenticated encryption and key management. Example - * callbacks are provided by MBEDTLS_SSL_TICKET_C. - * - * Comment this macro to disable support for SSL session tickets - */ -#define MBEDTLS_SSL_SESSION_TICKETS - -/** - * \def MBEDTLS_SSL_EXPORT_KEYS - * - * Enable support for exporting key block and master secret. - * This is required for certain users of TLS, e.g. EAP-TLS. - * - * Comment this macro to disable support for key export - */ -#define MBEDTLS_SSL_EXPORT_KEYS - -/** - * \def MBEDTLS_SSL_SERVER_NAME_INDICATION - * - * Enable support for RFC 6066 server name indication (SNI) in SSL. - * - * Requires: MBEDTLS_X509_CRT_PARSE_C - * - * Comment this macro to disable support for server name indication in SSL - */ -#define MBEDTLS_SSL_SERVER_NAME_INDICATION - -/** - * \def MBEDTLS_SSL_TRUNCATED_HMAC - * - * Enable support for RFC 6066 truncated HMAC in SSL. - * - * Comment this macro to disable support for truncated HMAC in SSL - */ -#define MBEDTLS_SSL_TRUNCATED_HMAC - -/** - * \def MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT - * - * Fallback to old (pre-2.7), non-conforming implementation of the truncated - * HMAC extension which also truncates the HMAC key. Note that this option is - * only meant for a transitory upgrade period and is likely to be removed in - * a future version of the library. - * - * \warning The old implementation is non-compliant and has a security weakness - * (2^80 brute force attack on the HMAC key used for a single, - * uninterrupted connection). This should only be enabled temporarily - * when (1) the use of truncated HMAC is essential in order to save - * bandwidth, and (2) the peer is an Mbed TLS stack that doesn't use - * the fixed implementation yet (pre-2.7). - * - * \deprecated This option is deprecated and will likely be removed in a - * future version of Mbed TLS. - * - * Uncomment to fallback to old, non-compliant truncated HMAC implementation. - * - * Requires: MBEDTLS_SSL_TRUNCATED_HMAC - */ -//#define MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT - -/** - * \def MBEDTLS_THREADING_ALT - * - * Provide your own alternate threading implementation. - * - * Requires: MBEDTLS_THREADING_C - * - * Uncomment this to allow your own alternate threading implementation. - */ -//#define MBEDTLS_THREADING_ALT - -/** - * \def MBEDTLS_THREADING_PTHREAD - * - * Enable the pthread wrapper layer for the threading layer. - * - * Requires: MBEDTLS_THREADING_C - * - * Uncomment this to enable pthread mutexes. - */ -//#define MBEDTLS_THREADING_PTHREAD - -/** - * \def MBEDTLS_USE_PSA_CRYPTO - * - * Make the X.509 and TLS library use PSA for cryptographic operations, see - * #MBEDTLS_PSA_CRYPTO_C. - * - * Note: this option is still in progress, the full X.509 and TLS modules are - * not covered yet, but parts that are not ported to PSA yet will still work - * as usual, so enabling this option should not break backwards compatibility. - * - * \warning Support for PSA is still an experimental feature. - * Any public API that depends on this option may change - * at any time until this warning is removed. - * - * Requires: MBEDTLS_PSA_CRYPTO_C. - */ -//#define MBEDTLS_USE_PSA_CRYPTO - -/** - * \def MBEDTLS_VERSION_FEATURES - * - * Allow run-time checking of compile-time enabled features. Thus allowing users - * to check at run-time if the library is for instance compiled with threading - * support via mbedtls_version_check_feature(). - * - * Requires: MBEDTLS_VERSION_C - * - * Comment this to disable run-time checking and save ROM space - */ -#define MBEDTLS_VERSION_FEATURES - -/** - * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 - * - * If set, the X509 parser will not break-off when parsing an X509 certificate - * and encountering an extension in a v1 or v2 certificate. - * - * Uncomment to prevent an error. - */ -//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 - -/** - * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION - * - * If set, the X509 parser will not break-off when parsing an X509 certificate - * and encountering an unknown critical extension. - * - * \warning Depending on your PKI use, enabling this can be a security risk! - * - * Uncomment to prevent an error. - */ -//#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION - -/** - * \def MBEDTLS_X509_CHECK_KEY_USAGE - * - * Enable verification of the keyUsage extension (CA and leaf certificates). - * - * Disabling this avoids problems with mis-issued and/or misused - * (intermediate) CA and leaf certificates. - * - * \warning Depending on your PKI use, disabling this can be a security risk! - * - * Comment to skip keyUsage checking for both CA and leaf certificates. - */ -#define MBEDTLS_X509_CHECK_KEY_USAGE - -/** - * \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE - * - * Enable verification of the extendedKeyUsage extension (leaf certificates). - * - * Disabling this avoids problems with mis-issued and/or misused certificates. - * - * \warning Depending on your PKI use, disabling this can be a security risk! - * - * Comment to skip extendedKeyUsage checking for certificates. - */ -#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE - -/** - * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT - * - * Enable parsing and verification of X.509 certificates, CRLs and CSRS - * signed with RSASSA-PSS (aka PKCS#1 v2.1). - * - * Comment this macro to disallow using RSASSA-PSS in certificates. - */ -#define MBEDTLS_X509_RSASSA_PSS_SUPPORT - -/** - * \def MBEDTLS_ZLIB_SUPPORT - * - * If set, the SSL/TLS module uses ZLIB to support compression and - * decompression of packet data. - * - * \warning TLS-level compression MAY REDUCE SECURITY! See for example the - * CRIME attack. Before enabling this option, you should examine with care if - * CRIME or similar exploits may be applicable to your use case. - * - * \note Currently compression can't be used with DTLS. - * - * \deprecated This feature is deprecated and will be removed - * in the next major revision of the library. - * - * Used in: library/ssl_tls.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * This feature requires zlib library and headers to be present. - * - * Uncomment to enable use of ZLIB - */ -//#define MBEDTLS_ZLIB_SUPPORT -/* \} name SECTION: mbed TLS feature support */ - -/** - * \name SECTION: mbed TLS modules - * - * This section enables or disables entire modules in mbed TLS - * \{ - */ - -/** - * \def MBEDTLS_AESNI_C - * - * Enable AES-NI support on x86-64. - * - * Module: library/aesni.c - * Caller: library/aes.c - * - * Requires: MBEDTLS_HAVE_ASM - * - * This modules adds support for the AES-NI instructions on x86-64 - */ -#define MBEDTLS_AESNI_C - -/** - * \def MBEDTLS_AES_C - * - * Enable the AES block cipher. - * - * Module: library/aes.c - * Caller: library/cipher.c - * library/pem.c - * library/ctr_drbg.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA - * - * PEM_PARSE uses AES for decrypting encrypted keys. - */ -#define MBEDTLS_AES_C - -/** - * \def MBEDTLS_ARC4_C - * - * Enable the ARCFOUR stream cipher. - * - * Module: library/arc4.c - * Caller: library/cipher.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA - * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 - * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA - * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA - * - * \warning ARC4 is considered a weak cipher and its use constitutes a - * security risk. If possible, we recommend avoidng dependencies on - * it, and considering stronger ciphers instead. - * - */ -#define MBEDTLS_ARC4_C - -/** - * \def MBEDTLS_ASN1_PARSE_C - * - * Enable the generic ASN1 parser. - * - * Module: library/asn1.c - * Caller: library/x509.c - * library/dhm.c - * library/pkcs12.c - * library/pkcs5.c - * library/pkparse.c - */ -#define MBEDTLS_ASN1_PARSE_C - -/** - * \def MBEDTLS_ASN1_WRITE_C - * - * Enable the generic ASN1 writer. - * - * Module: library/asn1write.c - * Caller: library/ecdsa.c - * library/pkwrite.c - * library/x509_create.c - * library/x509write_crt.c - * library/x509write_csr.c - */ -#define MBEDTLS_ASN1_WRITE_C - -/** - * \def MBEDTLS_BASE64_C - * - * Enable the Base64 module. - * - * Module: library/base64.c - * Caller: library/pem.c - * - * This module is required for PEM support (required by X.509). - */ -#define MBEDTLS_BASE64_C - -/** - * \def MBEDTLS_BIGNUM_C - * - * Enable the multi-precision integer library. - * - * Module: library/bignum.c - * Caller: library/dhm.c - * library/ecp.c - * library/ecdsa.c - * library/rsa.c - * library/rsa_internal.c - * library/ssl_tls.c - * - * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. - */ -#define MBEDTLS_BIGNUM_C - -/** - * \def MBEDTLS_BLOWFISH_C - * - * Enable the Blowfish block cipher. - * - * Module: library/blowfish.c - */ -#define MBEDTLS_BLOWFISH_C - -/** - * \def MBEDTLS_CAMELLIA_C - * - * Enable the Camellia block cipher. - * - * Module: library/camellia.c - * Caller: library/cipher.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 - */ -#define MBEDTLS_CAMELLIA_C - -/** - * \def MBEDTLS_ARIA_C - * - * Enable the ARIA block cipher. - * - * Module: library/aria.c - * Caller: library/cipher.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * - * MBEDTLS_TLS_RSA_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384 - */ -//#define MBEDTLS_ARIA_C - -/** - * \def MBEDTLS_CCM_C - * - * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. - * - * Module: library/ccm.c - * - * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C - * - * This module enables the AES-CCM ciphersuites, if other requisites are - * enabled as well. - */ -#define MBEDTLS_CCM_C - -/** - * \def MBEDTLS_CERTS_C - * - * Enable the test certificates. - * - * Module: library/certs.c - * Caller: - * - * This module is used for testing (ssl_client/server). - */ -#define MBEDTLS_CERTS_C - -/** - * \def MBEDTLS_CHACHA20_C - * - * Enable the ChaCha20 stream cipher. - * - * Module: library/chacha20.c - */ -#define MBEDTLS_CHACHA20_C - -/** - * \def MBEDTLS_CHACHAPOLY_C - * - * Enable the ChaCha20-Poly1305 AEAD algorithm. - * - * Module: library/chachapoly.c - * - * This module requires: MBEDTLS_CHACHA20_C, MBEDTLS_POLY1305_C - */ -#define MBEDTLS_CHACHAPOLY_C - -/** - * \def MBEDTLS_CIPHER_C - * - * Enable the generic cipher layer. - * - * Module: library/cipher.c - * Caller: library/ssl_tls.c - * - * Uncomment to enable generic cipher wrappers. - */ -#define MBEDTLS_CIPHER_C - -/** - * \def MBEDTLS_CMAC_C - * - * Enable the CMAC (Cipher-based Message Authentication Code) mode for block - * ciphers. - * - * Module: library/cmac.c - * - * Requires: MBEDTLS_AES_C or MBEDTLS_DES_C - * - */ -//#define MBEDTLS_CMAC_C - -/** - * \def MBEDTLS_CTR_DRBG_C - * - * Enable the CTR_DRBG AES-based random generator. - * The CTR_DRBG generator uses AES-256 by default. - * To use AES-128 instead, enable MBEDTLS_CTR_DRBG_USE_128_BIT_KEY below. - * - * Module: library/ctr_drbg.c - * Caller: - * - * Requires: MBEDTLS_AES_C - * - * This module provides the CTR_DRBG AES random number generator. - */ -#define MBEDTLS_CTR_DRBG_C - -/** - * \def MBEDTLS_DEBUG_C - * - * Enable the debug functions. - * - * Module: library/debug.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * This module provides debugging functions. - */ -#define MBEDTLS_DEBUG_C - -/** - * \def MBEDTLS_DES_C - * - * Enable the DES block cipher. - * - * Module: library/des.c - * Caller: library/pem.c - * library/cipher.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA - * - * PEM_PARSE uses DES/3DES for decrypting encrypted keys. - * - * \warning DES is considered a weak cipher and its use constitutes a - * security risk. We recommend considering stronger ciphers instead. - */ -#define MBEDTLS_DES_C - -/** - * \def MBEDTLS_DHM_C - * - * Enable the Diffie-Hellman-Merkle module. - * - * Module: library/dhm.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * This module is used by the following key exchanges: - * DHE-RSA, DHE-PSK - * - * \warning Using DHE constitutes a security risk as it - * is not possible to validate custom DH parameters. - * If possible, it is recommended users should consider - * preferring other methods of key exchange. - * See dhm.h for more details. - * - */ -#define MBEDTLS_DHM_C - -/** - * \def MBEDTLS_ECDH_C - * - * Enable the elliptic curve Diffie-Hellman library. - * - * Module: library/ecdh.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * This module is used by the following key exchanges: - * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK - * - * Requires: MBEDTLS_ECP_C - */ -#define MBEDTLS_ECDH_C - -/** - * \def MBEDTLS_ECDSA_C - * - * Enable the elliptic curve DSA library. - * - * Module: library/ecdsa.c - * Caller: - * - * This module is used by the following key exchanges: - * ECDHE-ECDSA - * - * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C - */ -#define MBEDTLS_ECDSA_C - -/** - * \def MBEDTLS_ECJPAKE_C - * - * Enable the elliptic curve J-PAKE library. - * - * \warning This is currently experimental. EC J-PAKE support is based on the - * Thread v1.0.0 specification; incompatible changes to the specification - * might still happen. For this reason, this is disabled by default. - * - * Module: library/ecjpake.c - * Caller: - * - * This module is used by the following key exchanges: - * ECJPAKE - * - * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C - */ -//#define MBEDTLS_ECJPAKE_C - -/** - * \def MBEDTLS_ECP_C - * - * Enable the elliptic curve over GF(p) library. - * - * Module: library/ecp.c - * Caller: library/ecdh.c - * library/ecdsa.c - * library/ecjpake.c - * - * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED - */ -#define MBEDTLS_ECP_C - -/** - * \def MBEDTLS_ENTROPY_C - * - * Enable the platform-specific entropy code. - * - * Module: library/entropy.c - * Caller: - * - * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C - * - * This module provides a generic entropy pool - */ -#define MBEDTLS_ENTROPY_C - -/** - * \def MBEDTLS_ERROR_C - * - * Enable error code to error string conversion. - * - * Module: library/error.c - * Caller: - * - * This module enables mbedtls_strerror(). - */ -#define MBEDTLS_ERROR_C - -/** - * \def MBEDTLS_GCM_C - * - * Enable the Galois/Counter Mode (GCM) for AES. - * - * Module: library/gcm.c - * - * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C - * - * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other - * requisites are enabled as well. - */ -#define MBEDTLS_GCM_C - -/** - * \def MBEDTLS_HAVEGE_C - * - * Enable the HAVEGE random generator. - * - * Warning: the HAVEGE random generator is not suitable for virtualized - * environments - * - * Warning: the HAVEGE random generator is dependent on timing and specific - * processor traits. It is therefore not advised to use HAVEGE as - * your applications primary random generator or primary entropy pool - * input. As a secondary input to your entropy pool, it IS able add - * the (limited) extra entropy it provides. - * - * Module: library/havege.c - * Caller: - * - * Requires: MBEDTLS_TIMING_C - * - * Uncomment to enable the HAVEGE random generator. - */ -//#define MBEDTLS_HAVEGE_C - -/** - * \def MBEDTLS_HKDF_C - * - * Enable the HKDF algorithm (RFC 5869). - * - * Module: library/hkdf.c - * Caller: - * - * Requires: MBEDTLS_MD_C - * - * This module adds support for the Hashed Message Authentication Code - * (HMAC)-based key derivation function (HKDF). - */ -#define MBEDTLS_HKDF_C - -/** - * \def MBEDTLS_HMAC_DRBG_C - * - * Enable the HMAC_DRBG random generator. - * - * Module: library/hmac_drbg.c - * Caller: - * - * Requires: MBEDTLS_MD_C - * - * Uncomment to enable the HMAC_DRBG random number geerator. - */ -#define MBEDTLS_HMAC_DRBG_C - -/** - * \def MBEDTLS_NIST_KW_C - * - * Enable the Key Wrapping mode for 128-bit block ciphers, - * as defined in NIST SP 800-38F. Only KW and KWP modes - * are supported. At the moment, only AES is approved by NIST. - * - * Module: library/nist_kw.c - * - * Requires: MBEDTLS_AES_C and MBEDTLS_CIPHER_C - */ -//#define MBEDTLS_NIST_KW_C - -/** - * \def MBEDTLS_MD_C - * - * Enable the generic message digest layer. - * - * Module: library/md.c - * Caller: - * - * Uncomment to enable generic message digest wrappers. - */ -#define MBEDTLS_MD_C - -/** - * \def MBEDTLS_MD2_C - * - * Enable the MD2 hash algorithm. - * - * Module: library/md2.c - * Caller: - * - * Uncomment to enable support for (rare) MD2-signed X.509 certs. - * - * \warning MD2 is considered a weak message digest and its use constitutes a - * security risk. If possible, we recommend avoiding dependencies on - * it, and considering stronger message digests instead. - * - */ -//#define MBEDTLS_MD2_C - -/** - * \def MBEDTLS_MD4_C - * - * Enable the MD4 hash algorithm. - * - * Module: library/md4.c - * Caller: - * - * Uncomment to enable support for (rare) MD4-signed X.509 certs. - * - * \warning MD4 is considered a weak message digest and its use constitutes a - * security risk. If possible, we recommend avoiding dependencies on - * it, and considering stronger message digests instead. - * - */ -//#define MBEDTLS_MD4_C - -/** - * \def MBEDTLS_MD5_C - * - * Enable the MD5 hash algorithm. - * - * Module: library/md5.c - * Caller: library/md.c - * library/pem.c - * library/ssl_tls.c - * - * This module is required for SSL/TLS up to version 1.1, and for TLS 1.2 - * depending on the handshake parameters. Further, it is used for checking - * MD5-signed certificates, and for PBKDF1 when decrypting PEM-encoded - * encrypted keys. - * - * \warning MD5 is considered a weak message digest and its use constitutes a - * security risk. If possible, we recommend avoiding dependencies on - * it, and considering stronger message digests instead. - * - */ -#define MBEDTLS_MD5_C - -/** - * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C - * - * Enable the buffer allocator implementation that makes use of a (stack) - * based buffer to 'allocate' dynamic memory. (replaces calloc() and free() - * calls) - * - * Module: library/memory_buffer_alloc.c - * - * Requires: MBEDTLS_PLATFORM_C - * MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS) - * - * Enable this module to enable the buffer memory allocator. - */ -//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C - -/** - * \def MBEDTLS_NET_C - * - * Enable the TCP and UDP over IPv6/IPv4 networking routines. - * - * \note This module only works on POSIX/Unix (including Linux, BSD and OS X) - * and Windows. For other platforms, you'll want to disable it, and write your - * own networking callbacks to be passed to \c mbedtls_ssl_set_bio(). - * - * \note See also our Knowledge Base article about porting to a new - * environment: - * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS - * - * Module: library/net_sockets.c - * - * This module provides networking routines. - */ -#define MBEDTLS_NET_C - -/** - * \def MBEDTLS_OID_C - * - * Enable the OID database. - * - * Module: library/oid.c - * Caller: library/asn1write.c - * library/pkcs5.c - * library/pkparse.c - * library/pkwrite.c - * library/rsa.c - * library/x509.c - * library/x509_create.c - * library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * library/x509write_crt.c - * library/x509write_csr.c - * - * This modules translates between OIDs and internal values. - */ -#define MBEDTLS_OID_C - -/** - * \def MBEDTLS_PADLOCK_C - * - * Enable VIA Padlock support on x86. - * - * Module: library/padlock.c - * Caller: library/aes.c - * - * Requires: MBEDTLS_HAVE_ASM - * - * This modules adds support for the VIA PadLock on x86. - */ -#define MBEDTLS_PADLOCK_C - -/** - * \def MBEDTLS_PEM_PARSE_C - * - * Enable PEM decoding / parsing. - * - * Module: library/pem.c - * Caller: library/dhm.c - * library/pkparse.c - * library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * - * Requires: MBEDTLS_BASE64_C - * - * This modules adds support for decoding / parsing PEM files. - */ -#define MBEDTLS_PEM_PARSE_C - -/** - * \def MBEDTLS_PEM_WRITE_C - * - * Enable PEM encoding / writing. - * - * Module: library/pem.c - * Caller: library/pkwrite.c - * library/x509write_crt.c - * library/x509write_csr.c - * - * Requires: MBEDTLS_BASE64_C - * - * This modules adds support for encoding / writing PEM files. - */ -#define MBEDTLS_PEM_WRITE_C - -/** - * \def MBEDTLS_PK_C - * - * Enable the generic public (asymetric) key layer. - * - * Module: library/pk.c - * Caller: library/ssl_tls.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C - * - * Uncomment to enable generic public key wrappers. - */ -#define MBEDTLS_PK_C - -/** - * \def MBEDTLS_PK_PARSE_C - * - * Enable the generic public (asymetric) key parser. - * - * Module: library/pkparse.c - * Caller: library/x509_crt.c - * library/x509_csr.c - * - * Requires: MBEDTLS_PK_C - * - * Uncomment to enable generic public key parse functions. - */ -#define MBEDTLS_PK_PARSE_C - -/** - * \def MBEDTLS_PK_WRITE_C - * - * Enable the generic public (asymetric) key writer. - * - * Module: library/pkwrite.c - * Caller: library/x509write.c - * - * Requires: MBEDTLS_PK_C - * - * Uncomment to enable generic public key write functions. - */ -#define MBEDTLS_PK_WRITE_C - -/** - * \def MBEDTLS_PKCS5_C - * - * Enable PKCS#5 functions. - * - * Module: library/pkcs5.c - * - * Requires: MBEDTLS_MD_C - * - * This module adds support for the PKCS#5 functions. - */ -#define MBEDTLS_PKCS5_C - -/** - * \def MBEDTLS_PKCS11_C - * - * Enable wrapper for PKCS#11 smartcard support. - * - * Module: library/pkcs11.c - * Caller: library/pk.c - * - * Requires: MBEDTLS_PK_C - * - * This module enables SSL/TLS PKCS #11 smartcard support. - * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) - */ -//#define MBEDTLS_PKCS11_C - -/** - * \def MBEDTLS_PKCS12_C - * - * Enable PKCS#12 PBE functions. - * Adds algorithms for parsing PKCS#8 encrypted private keys - * - * Module: library/pkcs12.c - * Caller: library/pkparse.c - * - * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C - * Can use: MBEDTLS_ARC4_C - * - * This module enables PKCS#12 functions. - */ -#define MBEDTLS_PKCS12_C - -/** - * \def MBEDTLS_PLATFORM_C - * - * Enable the platform abstraction layer that allows you to re-assign - * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit(). - * - * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT - * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned - * above to be specified at runtime or compile time respectively. - * - * \note This abstraction layer must be enabled on Windows (including MSYS2) - * as other module rely on it for a fixed snprintf implementation. - * - * Module: library/platform.c - * Caller: Most other .c files - * - * This module enables abstraction of common (libc) functions. - */ -#define MBEDTLS_PLATFORM_C - -/** - * \def MBEDTLS_POLY1305_C - * - * Enable the Poly1305 MAC algorithm. - * - * Module: library/poly1305.c - * Caller: library/chachapoly.c - */ -#define MBEDTLS_POLY1305_C - -/** - * \def MBEDTLS_PSA_CRYPTO_C - * - * Enable the Platform Security Architecture cryptography API. - * - * \note This option only has an effect when the build option - * USE_CRYPTO_SUBMODULE is also in use. - * - * \warning This feature is experimental and available on an opt-in basis only. - * PSA APIs are subject to change at any time. The implementation comes with - * less assurance and support than the rest of Mbed TLS. - * - * Module: crypto/library/psa_crypto.c - * - * Requires: MBEDTLS_CTR_DRBG_C, MBEDTLS_ENTROPY_C - * - */ -//#define MBEDTLS_PSA_CRYPTO_C - -/** - * \def MBEDTLS_PSA_CRYPTO_STORAGE_C - * - * Enable the Platform Security Architecture persistent key storage. - * - * Module: library/psa_crypto_storage.c - * - * Requires: MBEDTLS_PSA_CRYPTO_C and one of either - * MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C or MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C - * (but not both) - * - */ -//#define MBEDTLS_PSA_CRYPTO_STORAGE_C - -/** - * \def MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C - * - * Enable persistent key storage over files for the - * Platform Security Architecture cryptography API. - * - * Module: library/psa_crypto_storage_file.c - * - * Requires: MBEDTLS_PSA_CRYPTO_C, MBEDTLS_FS_IO - * - */ -//#define MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C - -/** - * \def MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C - * - * Enable persistent key storage over PSA ITS for the - * Platform Security Architecture cryptography API. - * - * Module: library/psa_crypto_storage_its.c - * - * Requires: MBEDTLS_PSA_CRYPTO_C, MBEDTLS_PSA_HAS_ITS_IO - * - */ -//#define MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C - -/** - * \def MBEDTLS_RIPEMD160_C - * - * Enable the RIPEMD-160 hash algorithm. - * - * Module: library/ripemd160.c - * Caller: library/md.c - * - */ -#define MBEDTLS_RIPEMD160_C - -/** - * \def MBEDTLS_RSA_C - * - * Enable the RSA public-key cryptosystem. - * - * Module: library/rsa.c - * library/rsa_internal.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * library/x509.c - * - * This module is used by the following key exchanges: - * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK - * - * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C - */ -#define MBEDTLS_RSA_C - -/** - * \def MBEDTLS_SHA1_C - * - * Enable the SHA1 cryptographic hash algorithm. - * - * Module: library/sha1.c - * Caller: library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * library/x509write_crt.c - * - * This module is required for SSL/TLS up to version 1.1, for TLS 1.2 - * depending on the handshake parameters, and for SHA1-signed certificates. - * - * \warning SHA-1 is considered a weak message digest and its use constitutes - * a security risk. If possible, we recommend avoiding dependencies - * on it, and considering stronger message digests instead. - * - */ -#define MBEDTLS_SHA1_C - -/** - * \def MBEDTLS_SHA256_C - * - * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. - * - * Module: library/sha256.c - * Caller: library/entropy.c - * library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * This module adds support for SHA-224 and SHA-256. - * This module is required for the SSL/TLS 1.2 PRF function. - */ -#define MBEDTLS_SHA256_C - -/** - * \def MBEDTLS_SHA512_C - * - * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. - * - * Module: library/sha512.c - * Caller: library/entropy.c - * library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * This module adds support for SHA-384 and SHA-512. - */ -#define MBEDTLS_SHA512_C - -/** - * \def MBEDTLS_SSL_CACHE_C - * - * Enable simple SSL cache implementation. - * - * Module: library/ssl_cache.c - * Caller: - * - * Requires: MBEDTLS_SSL_CACHE_C - */ -#define MBEDTLS_SSL_CACHE_C - -/** - * \def MBEDTLS_SSL_COOKIE_C - * - * Enable basic implementation of DTLS cookies for hello verification. - * - * Module: library/ssl_cookie.c - * Caller: - */ -#define MBEDTLS_SSL_COOKIE_C - -/** - * \def MBEDTLS_SSL_TICKET_C - * - * Enable an implementation of TLS server-side callbacks for session tickets. - * - * Module: library/ssl_ticket.c - * Caller: - * - * Requires: MBEDTLS_CIPHER_C - */ -#define MBEDTLS_SSL_TICKET_C - -/** - * \def MBEDTLS_SSL_CLI_C - * - * Enable the SSL/TLS client code. - * - * Module: library/ssl_cli.c - * Caller: - * - * Requires: MBEDTLS_SSL_TLS_C - * - * This module is required for SSL/TLS client support. - */ -#define MBEDTLS_SSL_CLI_C - -/** - * \def MBEDTLS_SSL_SRV_C - * - * Enable the SSL/TLS server code. - * - * Module: library/ssl_srv.c - * Caller: - * - * Requires: MBEDTLS_SSL_TLS_C - * - * This module is required for SSL/TLS server support. - */ -#define MBEDTLS_SSL_SRV_C - -/** - * \def MBEDTLS_SSL_TLS_C - * - * Enable the generic SSL/TLS code. - * - * Module: library/ssl_tls.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C - * and at least one of the MBEDTLS_SSL_PROTO_XXX defines - * - * This module is required for SSL/TLS. - */ -#define MBEDTLS_SSL_TLS_C - -/** - * \def MBEDTLS_THREADING_C - * - * Enable the threading abstraction layer. - * By default mbed TLS assumes it is used in a non-threaded environment or that - * contexts are not shared between threads. If you do intend to use contexts - * between threads, you will need to enable this layer to prevent race - * conditions. See also our Knowledge Base article about threading: - * https://tls.mbed.org/kb/development/thread-safety-and-multi-threading - * - * Module: library/threading.c - * - * This allows different threading implementations (self-implemented or - * provided). - * - * You will have to enable either MBEDTLS_THREADING_ALT or - * MBEDTLS_THREADING_PTHREAD. - * - * Enable this layer to allow use of mutexes within mbed TLS - */ -//#define MBEDTLS_THREADING_C - -/** - * \def MBEDTLS_TIMING_C - * - * Enable the semi-portable timing interface. - * - * \note The provided implementation only works on POSIX/Unix (including Linux, - * BSD and OS X) and Windows. On other platforms, you can either disable that - * module and provide your own implementations of the callbacks needed by - * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide - * your own implementation of the whole module by setting - * \c MBEDTLS_TIMING_ALT in the current file. - * - * \note See also our Knowledge Base article about porting to a new - * environment: - * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS - * - * Module: library/timing.c - * Caller: library/havege.c - * - * This module is used by the HAVEGE random number generator. - */ -#define MBEDTLS_TIMING_C - -/** - * \def MBEDTLS_VERSION_C - * - * Enable run-time version information. - * - * Module: library/version.c - * - * This module provides run-time version information. - */ -#define MBEDTLS_VERSION_C - -/** - * \def MBEDTLS_X509_USE_C - * - * Enable X.509 core for using certificates. - * - * Module: library/x509.c - * Caller: library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * - * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, - * MBEDTLS_PK_PARSE_C - * - * This module is required for the X.509 parsing modules. - */ -#define MBEDTLS_X509_USE_C - -/** - * \def MBEDTLS_X509_CRT_PARSE_C - * - * Enable X.509 certificate parsing. - * - * Module: library/x509_crt.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * Requires: MBEDTLS_X509_USE_C - * - * This module is required for X.509 certificate parsing. - */ -#define MBEDTLS_X509_CRT_PARSE_C - -/** - * \def MBEDTLS_X509_CRL_PARSE_C - * - * Enable X.509 CRL parsing. - * - * Module: library/x509_crl.c - * Caller: library/x509_crt.c - * - * Requires: MBEDTLS_X509_USE_C - * - * This module is required for X.509 CRL parsing. - */ -#define MBEDTLS_X509_CRL_PARSE_C - -/** - * \def MBEDTLS_X509_CSR_PARSE_C - * - * Enable X.509 Certificate Signing Request (CSR) parsing. - * - * Module: library/x509_csr.c - * Caller: library/x509_crt_write.c - * - * Requires: MBEDTLS_X509_USE_C - * - * This module is used for reading X.509 certificate request. - */ -#define MBEDTLS_X509_CSR_PARSE_C - -/** - * \def MBEDTLS_X509_CREATE_C - * - * Enable X.509 core for creating certificates. - * - * Module: library/x509_create.c - * - * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C - * - * This module is the basis for creating X.509 certificates and CSRs. - */ -#define MBEDTLS_X509_CREATE_C - -/** - * \def MBEDTLS_X509_CRT_WRITE_C - * - * Enable creating X.509 certificates. - * - * Module: library/x509_crt_write.c - * - * Requires: MBEDTLS_X509_CREATE_C - * - * This module is required for X.509 certificate creation. - */ -#define MBEDTLS_X509_CRT_WRITE_C - -/** - * \def MBEDTLS_X509_CSR_WRITE_C - * - * Enable creating X.509 Certificate Signing Requests (CSR). - * - * Module: library/x509_csr_write.c - * - * Requires: MBEDTLS_X509_CREATE_C - * - * This module is required for X.509 certificate request writing. - */ -#define MBEDTLS_X509_CSR_WRITE_C - -/** - * \def MBEDTLS_XTEA_C - * - * Enable the XTEA block cipher. - * - * Module: library/xtea.c - * Caller: - */ -#define MBEDTLS_XTEA_C - -/* \} name SECTION: mbed TLS modules */ - -/** - * \name SECTION: Module configuration options - * - * This section allows for the setting of module specific sizes and - * configuration options. The default values are already present in the - * relevant header files and should suffice for the regular use cases. - * - * Our advice is to enable options and change their values here - * only if you have a good reason and know the consequences. - * - * Please check the respective header file for documentation on these - * parameters (to prevent duplicate documentation). - * \{ - */ - -/* MPI / BIGNUM options */ -//#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ -//#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ - -/* CTR_DRBG options */ -//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ -//#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ -//#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ -//#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ -//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ -//#define MBEDTLS_CTR_DRBG_USE_128_BIT_KEY /**< Use 128-bit key for CTR_DRBG - may reduce security (see ctr_drbg.h) */ - -/* HMAC_DRBG options */ -//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ -//#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ -//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ -//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ - -/* ECP options */ -//#define MBEDTLS_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ -//#define MBEDTLS_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ -//#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ - -/* Entropy options */ -//#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ -//#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ -//#define MBEDTLS_ENTROPY_MIN_HARDWARE 32 /**< Default minimum number of bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released */ - -/* Memory buffer allocator options */ -//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ - -/* Platform options */ -//#define MBEDTLS_PLATFORM_STD_MEM_HDR /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ -//#define MBEDTLS_PLATFORM_STD_CALLOC calloc /**< Default allocator to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_TIME time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ -//#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ -/* Note: your snprintf must correctly zero-terminate the buffer! */ -//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" /**< Seed file to read/write with default implementation */ - -/* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */ -/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */ -//#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be undefined */ -//#define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, can be undefined */ -//#define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to use, can be undefined */ -//#define MBEDTLS_PLATFORM_TIME_MACRO time /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ -//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ -//#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */ -//#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */ -/* Note: your snprintf must correctly zero-terminate the buffer! */ -//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */ -//#define MBEDTLS_PLATFORM_VSNPRINTF_MACRO vsnprintf /**< Default vsnprintf macro to use, can be undefined */ -//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */ -//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */ - -/** - * \brief This macro is invoked by the library when an invalid parameter - * is detected that is only checked with MBEDTLS_CHECK_PARAMS - * (see the documentation of that option for context). - * - * When you leave this undefined here, a default definition is - * provided that invokes the function mbedtls_param_failed(), - * which is declared in platform_util.h for the benefit of the - * library, but that you need to define in your application. - * - * When you define this here, this replaces the default - * definition in platform_util.h (which no longer declares the - * function mbedtls_param_failed()) and it is your responsibility - * to make sure this macro expands to something suitable (in - * particular, that all the necessary declarations are visible - * from within the library - you can ensure that by providing - * them in this file next to the macro definition). - * - * Note that you may define this macro to expand to nothing, in - * which case you don't have to worry about declarations or - * definitions. However, you will then be notified about invalid - * parameters only in non-void functions, and void function will - * just silently return early on invalid parameters, which - * partially negates the benefits of enabling - * #MBEDTLS_CHECK_PARAMS in the first place, so is discouraged. - * - * \param cond The expression that should evaluate to true, but doesn't. - */ -//#define MBEDTLS_PARAM_FAILED( cond ) assert( cond ) - -/* SSL Cache options */ -//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ -//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ - -/* SSL options */ - -/** \def MBEDTLS_SSL_MAX_CONTENT_LEN - * - * Maximum length (in bytes) of incoming and outgoing plaintext fragments. - * - * This determines the size of both the incoming and outgoing TLS I/O buffers - * in such a way that both are capable of holding the specified amount of - * plaintext data, regardless of the protection mechanism used. - * - * To configure incoming and outgoing I/O buffers separately, use - * #MBEDTLS_SSL_IN_CONTENT_LEN and #MBEDTLS_SSL_OUT_CONTENT_LEN, - * which overwrite the value set by this option. - * - * \note When using a value less than the default of 16KB on the client, it is - * recommended to use the Maximum Fragment Length (MFL) extension to - * inform the server about this limitation. On the server, there - * is no supported, standardized way of informing the client about - * restriction on the maximum size of incoming messages, and unless - * the limitation has been communicated by other means, it is recommended - * to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN - * while keeping the default value of 16KB for the incoming buffer. - * - * Uncomment to set the maximum plaintext size of both - * incoming and outgoing I/O buffers. - */ -//#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 - -/** \def MBEDTLS_SSL_IN_CONTENT_LEN - * - * Maximum length (in bytes) of incoming plaintext fragments. - * - * This determines the size of the incoming TLS I/O buffer in such a way - * that it is capable of holding the specified amount of plaintext data, - * regardless of the protection mechanism used. - * - * If this option is undefined, it inherits its value from - * #MBEDTLS_SSL_MAX_CONTENT_LEN. - * - * \note When using a value less than the default of 16KB on the client, it is - * recommended to use the Maximum Fragment Length (MFL) extension to - * inform the server about this limitation. On the server, there - * is no supported, standardized way of informing the client about - * restriction on the maximum size of incoming messages, and unless - * the limitation has been communicated by other means, it is recommended - * to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN - * while keeping the default value of 16KB for the incoming buffer. - * - * Uncomment to set the maximum plaintext size of the incoming I/O buffer - * independently of the outgoing I/O buffer. - */ -//#define MBEDTLS_SSL_IN_CONTENT_LEN 16384 - -/** \def MBEDTLS_SSL_OUT_CONTENT_LEN - * - * Maximum length (in bytes) of outgoing plaintext fragments. - * - * This determines the size of the outgoing TLS I/O buffer in such a way - * that it is capable of holding the specified amount of plaintext data, - * regardless of the protection mechanism used. - * - * If this option undefined, it inherits its value from - * #MBEDTLS_SSL_MAX_CONTENT_LEN. - * - * It is possible to save RAM by setting a smaller outward buffer, while keeping - * the default inward 16384 byte buffer to conform to the TLS specification. - * - * The minimum required outward buffer size is determined by the handshake - * protocol's usage. Handshaking will fail if the outward buffer is too small. - * The specific size requirement depends on the configured ciphers and any - * certificate data which is sent during the handshake. - * - * Uncomment to set the maximum plaintext size of the outgoing I/O buffer - * independently of the incoming I/O buffer. - */ -//#define MBEDTLS_SSL_OUT_CONTENT_LEN 16384 - -/** \def MBEDTLS_SSL_DTLS_MAX_BUFFERING - * - * Maximum number of heap-allocated bytes for the purpose of - * DTLS handshake message reassembly and future message buffering. - * - * This should be at least 9/8 * MBEDTLSSL_IN_CONTENT_LEN - * to account for a reassembled handshake message of maximum size, - * together with its reassembly bitmap. - * - * A value of 2 * MBEDTLS_SSL_IN_CONTENT_LEN (32768 by default) - * should be sufficient for all practical situations as it allows - * to reassembly a large handshake message (such as a certificate) - * while buffering multiple smaller handshake messages. - * - */ -//#define MBEDTLS_SSL_DTLS_MAX_BUFFERING 32768 - -//#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ -//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ -//#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */ - -/** - * Complete list of ciphersuites to use, in order of preference. - * - * \warning No dependency checking is done on that field! This option can only - * be used to restrict the set of available ciphersuites. It is your - * responsibility to make sure the needed modules are active. - * - * Use this to save a few hundred bytes of ROM (default ordering of all - * available ciphersuites) and a few to a few hundred bytes of RAM. - * - * The value below is only an example, not the default. - */ -//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - -/* X509 options */ -//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 /**< Maximum number of intermediate CAs in a verification chain. */ -//#define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 /**< Maximum length of a path/filename string in bytes including the null terminator character ('\0'). */ - -/** - * Allow SHA-1 in the default TLS configuration for certificate signing. - * Without this build-time option, SHA-1 support must be activated explicitly - * through mbedtls_ssl_conf_cert_profile. Turning on this option is not - * recommended because of it is possible to generate SHA-1 collisions, however - * this may be safe for legacy infrastructure where additional controls apply. - * - * \warning SHA-1 is considered a weak message digest and its use constitutes - * a security risk. If possible, we recommend avoiding dependencies - * on it, and considering stronger message digests instead. - * - */ -// #define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES - -/** - * Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake - * signature and ciphersuite selection. Without this build-time option, SHA-1 - * support must be activated explicitly through mbedtls_ssl_conf_sig_hashes. - * The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by - * default. At the time of writing, there is no practical attack on the use - * of SHA-1 in handshake signatures, hence this option is turned on by default - * to preserve compatibility with existing peers, but the general - * warning applies nonetheless: - * - * \warning SHA-1 is considered a weak message digest and its use constitutes - * a security risk. If possible, we recommend avoiding dependencies - * on it, and considering stronger message digests instead. - * - */ -#define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE - -/** - * Uncomment the macro to let mbed TLS use your alternate implementation of - * mbedtls_platform_zeroize(). This replaces the default implementation in - * platform_util.c. - * - * mbedtls_platform_zeroize() is a widely used function across the library to - * zero a block of memory. The implementation is expected to be secure in the - * sense that it has been written to prevent the compiler from removing calls - * to mbedtls_platform_zeroize() as part of redundant code elimination - * optimizations. However, it is difficult to guarantee that calls to - * mbedtls_platform_zeroize() will not be optimized by the compiler as older - * versions of the C language standards do not provide a secure implementation - * of memset(). Therefore, MBEDTLS_PLATFORM_ZEROIZE_ALT enables users to - * configure their own implementation of mbedtls_platform_zeroize(), for - * example by using directives specific to their compiler, features from newer - * C standards (e.g using memset_s() in C11) or calling a secure memset() from - * their system (e.g explicit_bzero() in BSD). - */ -//#define MBEDTLS_PLATFORM_ZEROIZE_ALT - -/** - * Uncomment the macro to let Mbed TLS use your alternate implementation of - * mbedtls_platform_gmtime_r(). This replaces the default implementation in - * platform_util.c. - * - * gmtime() is not a thread-safe function as defined in the C standard. The - * library will try to use safer implementations of this function, such as - * gmtime_r() when available. However, if Mbed TLS cannot identify the target - * system, the implementation of mbedtls_platform_gmtime_r() will default to - * using the standard gmtime(). In this case, calls from the library to - * gmtime() will be guarded by the global mutex mbedtls_threading_gmtime_mutex - * if MBEDTLS_THREADING_C is enabled. We recommend that calls from outside the - * library are also guarded with this mutex to avoid race conditions. However, - * if the macro MBEDTLS_PLATFORM_GMTIME_R_ALT is defined, Mbed TLS will - * unconditionally use the implementation for mbedtls_platform_gmtime_r() - * supplied at compile time. - */ -//#define MBEDTLS_PLATFORM_GMTIME_R_ALT - -/* \} name SECTION: Customisation configuration options */ - -/* Target and application specific configurations - * - * Allow user to override any previous default. - * - */ -#if defined(MBEDTLS_USER_CONFIG_FILE) -#include MBEDTLS_USER_CONFIG_FILE -#endif - -#include "check_config.h" - -#endif /* MBEDTLS_CONFIG_H */ diff --git a/configs/config-mini-tls1_1.h b/configs/config-mini-tls1_1.h deleted file mode 100644 index d4743bb22..000000000 --- a/configs/config-mini-tls1_1.h +++ /dev/null @@ -1,75 +0,0 @@ -/** - * \file config-mini-tls1_1.h - * - * \brief Minimal configuration for TLS 1.1 (RFC 4346) - */ -/* - * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * This file is part of mbed TLS (https://tls.mbed.org) - */ -/* - * Minimal configuration for TLS 1.1 (RFC 4346), implementing only the - * required ciphersuite: MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA - * - * See README.txt for usage instructions. - */ - -#ifndef MBEDTLS_CONFIG_H -#define MBEDTLS_CONFIG_H - -/* System support */ -#define MBEDTLS_HAVE_ASM -#define MBEDTLS_HAVE_TIME - -/* mbed TLS feature support */ -#define MBEDTLS_CIPHER_MODE_CBC -#define MBEDTLS_PKCS1_V15 -#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED -#define MBEDTLS_SSL_PROTO_TLS1_1 - -/* mbed TLS modules */ -#define MBEDTLS_AES_C -#define MBEDTLS_ASN1_PARSE_C -#define MBEDTLS_ASN1_WRITE_C -#define MBEDTLS_BIGNUM_C -#define MBEDTLS_CIPHER_C -#define MBEDTLS_CTR_DRBG_C -#define MBEDTLS_DES_C -#define MBEDTLS_ENTROPY_C -#define MBEDTLS_MD_C -#define MBEDTLS_MD5_C -#define MBEDTLS_NET_C -#define MBEDTLS_OID_C -#define MBEDTLS_PK_C -#define MBEDTLS_PK_PARSE_C -#define MBEDTLS_RSA_C -#define MBEDTLS_SHA1_C -#define MBEDTLS_SHA256_C -#define MBEDTLS_SSL_CLI_C -#define MBEDTLS_SSL_SRV_C -#define MBEDTLS_SSL_TLS_C -#define MBEDTLS_X509_CRT_PARSE_C -#define MBEDTLS_X509_USE_C - -/* For test certificates */ -#define MBEDTLS_BASE64_C -#define MBEDTLS_CERTS_C -#define MBEDTLS_PEM_PARSE_C - -#include "mbedtls/check_config.h" - -#endif /* MBEDTLS_CONFIG_H */ diff --git a/configs/config-thread.h b/configs/config-thread.h deleted file mode 100644 index f729a0381..000000000 --- a/configs/config-thread.h +++ /dev/null @@ -1,90 +0,0 @@ -/** - * \file config-thread.h - * - * \brief Minimal configuration for using TLS as part of Thread - */ -/* - * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * This file is part of mbed TLS (https://tls.mbed.org) - */ - -/* - * Minimal configuration for using TLS a part of Thread - * http://threadgroup.org/ - * - * Distinguishing features: - * - no RSA or classic DH, fully based on ECC - * - no X.509 - * - support for experimental EC J-PAKE key exchange - * - * See README.txt for usage instructions. - */ - -#ifndef MBEDTLS_CONFIG_H -#define MBEDTLS_CONFIG_H - -/* System support */ -#define MBEDTLS_HAVE_ASM - -/* mbed TLS feature support */ -#define MBEDTLS_AES_ROM_TABLES -#define MBEDTLS_ECP_DP_SECP256R1_ENABLED -#define MBEDTLS_ECP_NIST_OPTIM -#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED -#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH -#define MBEDTLS_SSL_PROTO_TLS1_2 -#define MBEDTLS_SSL_PROTO_DTLS -#define MBEDTLS_SSL_DTLS_ANTI_REPLAY -#define MBEDTLS_SSL_DTLS_HELLO_VERIFY -#define MBEDTLS_SSL_EXPORT_KEYS - -/* mbed TLS modules */ -#define MBEDTLS_AES_C -#define MBEDTLS_ASN1_PARSE_C -#define MBEDTLS_ASN1_WRITE_C -#define MBEDTLS_BIGNUM_C -#define MBEDTLS_CCM_C -#define MBEDTLS_CIPHER_C -#define MBEDTLS_CTR_DRBG_C -#define MBEDTLS_CMAC_C -#define MBEDTLS_ECJPAKE_C -#define MBEDTLS_ECP_C -#define MBEDTLS_ENTROPY_C -#define MBEDTLS_HMAC_DRBG_C -#define MBEDTLS_MD_C -#define MBEDTLS_OID_C -#define MBEDTLS_PK_C -#define MBEDTLS_PK_PARSE_C -#define MBEDTLS_SHA256_C -#define MBEDTLS_SSL_COOKIE_C -#define MBEDTLS_SSL_CLI_C -#define MBEDTLS_SSL_SRV_C -#define MBEDTLS_SSL_TLS_C - -/* Save RAM at the expense of ROM */ -#define MBEDTLS_AES_ROM_TABLES - -/* Save RAM by adjusting to our exact needs */ -#define MBEDTLS_ECP_MAX_BITS 256 -#define MBEDTLS_MPI_MAX_SIZE 32 // 256 bits is 32 bytes - -/* Save ROM and a few bytes of RAM by specifying our own ciphersuite list */ -#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 - -#include "mbedtls/check_config.h" - -#endif /* MBEDTLS_CONFIG_H */ diff --git a/tests/scripts/test-ref-configs.pl b/tests/scripts/test-ref-configs.pl index 56f2036ee..09baebb66 100755 --- a/tests/scripts/test-ref-configs.pl +++ b/tests/scripts/test-ref-configs.pl @@ -17,16 +17,8 @@ use warnings; use strict; my %configs = ( - 'config-default.h' => { - }, - 'config-mini-tls1_1.h' => { - }, 'config-suite-b.h' => { }, - 'config-ccm-psk-tls1_2.h' => { - }, - 'config-thread.h' => { - }, ); # If no config-name is provided, use all known configs.