#!/bin/sh # Test various options that are not covered by compat.sh # # Here the goal is not to cover every ciphersuite/version, but # rather specific options (max fragment length, truncated hmac, etc) # or procedures (session resumption from cache or ticket, renego, etc). # # Assumes all options are compiled in. set -u # test if it is defined from the environment before assining default # if yes, assume it means it's a build with all the options we need (SSLv2) if [ -n "${OPENSSL_CMD:-}" ]; then OPENSSL_OK=1 else OPENSSL_OK=0 fi # default values, can be overriden by the environment : ${P_SRV:=../programs/ssl/ssl_server2} : ${P_CLI:=../programs/ssl/ssl_client2} : ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key" O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client" TESTS=0 FAILS=0 CONFIG_H='../include/polarssl/config.h' MEMCHECK=0 FILTER='.*' if [ "$OPENSSL_OK" -gt 0 ]; then EXCLUDE='^$' else EXCLUDE='SSLv2' fi print_usage() { echo "Usage: $0 [options]" echo -e " -h|--help\tPrint this help." echo -e " -m|--memcheck\tCheck memory leaks and errors." echo -e " -f|--filter\tOnly matching tests are executed (default: '$FILTER')" echo -e " -e|--exclude\tMatching tests are excluded (default: '$EXCLUDE')" } get_options() { while [ $# -gt 0 ]; do case "$1" in -f|--filter) shift; FILTER=$1 ;; -e|--exclude) shift; EXCLUDE=$1 ;; -m|--memcheck) MEMCHECK=1 ;; -h|--help) print_usage exit 0 ;; *) echo "Unknown argument: '$1'" print_usage exit 1 ;; esac shift done } # print_name print_name() { echo -n "$1 " LEN=`echo "$1" | wc -c` LEN=`echo 72 - $LEN | bc` for i in `seq 1 $LEN`; do echo -n '.'; done echo -n ' ' TESTS=`echo $TESTS + 1 | bc` } # fail fail() { echo "FAIL" echo " ! $1" cp $SRV_OUT o-srv-${TESTS}.log cp $CLI_OUT o-cli-${TESTS}.log echo " ! outputs saved to o-srv-${TESTS}.log and o-cli-${TESTS}.log" FAILS=`echo $FAILS + 1 | bc` } # is_polar is_polar() { echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null } # has_mem_err has_mem_err() { if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" && grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null then return 1 # false: does not have errors else return 0 # true: has errors fi } # wait for server to start: two versions depending on lsof availability wait_server_start() { if which lsof >/dev/null; then # make sure we don't loop forever ( sleep "$DOG_DELAY"; echo "SERVERSTART TIMEOUT"; kill $MAIN_PID ) & WATCHDOG_PID=$! # make a tight loop, server usually takes less than 1 sec to start until lsof -nbi TCP:"$PORT" | grep LISTEN >/dev/null; do :; done kill $WATCHDOG_PID wait $WATCHDOG_PID else sleep "$START_DELAY" fi } # Usage: run_test name srv_cmd cli_cmd cli_exit [option [...]] # Options: -s pattern pattern that must be present in server output # -c pattern pattern that must be present in client output # -S pattern pattern that must be absent in server output # -C pattern pattern that must be absent in client output run_test() { NAME="$1" SRV_CMD="$2" CLI_CMD="$3" CLI_EXPECT="$4" shift 4 if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then : else return fi print_name "$NAME" # prepend valgrind to our commands if active if [ "$MEMCHECK" -gt 0 ]; then if is_polar "$SRV_CMD"; then SRV_CMD="valgrind --leak-check=full $SRV_CMD" fi if is_polar "$CLI_CMD"; then CLI_CMD="valgrind --leak-check=full $CLI_CMD" fi fi # run the commands echo "$SRV_CMD" > $SRV_OUT $SRV_CMD >> $SRV_OUT 2>&1 & SRV_PID=$! wait_server_start echo "$CLI_CMD" > $CLI_OUT eval "$CLI_CMD" >> $CLI_OUT 2>&1 CLI_EXIT=$? echo "EXIT: $CLI_EXIT" >> $CLI_OUT if is_polar "$SRV_CMD"; then # start watchdog in case SERVERQUIT fails ( sleep "$DOG_DELAY"; echo "SERVERQUIT TIMEOUT"; kill $MAIN_PID ) & WATCHDOG_PID=$! # psk is useful when server only has bad certs $P_CLI request_page=SERVERQUIT tickets=0 auth_mode=none psk=abc123 \ crt_file=data_files/cli2.crt key_file=data_files/cli2.key \ >/dev/null 2>&1 wait $SRV_PID kill $WATCHDOG_PID wait $WATCHDOG_PID else kill $SRV_PID wait $SRV_PID fi # check if the client and server went at least to the handshake stage # (useful to avoid tests with only negative assertions and non-zero # expected client exit to incorrectly succeed in case of catastrophic # failure) if is_polar "$SRV_CMD"; then if grep "Performing the SSL/TLS handshake" $SRV_OUT >/dev/null; then :; else fail "server failed to start" return fi fi if is_polar "$CLI_CMD"; then if grep "Performing the SSL/TLS handshake" $CLI_OUT >/dev/null; then :; else fail "client failed to start" return fi fi # check server exit code if [ $? != 0 ]; then fail "server fail" return fi # check client exit code if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \ \( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ] then fail "bad client exit code" return fi # check other assertions while [ $# -gt 0 ] do case $1 in "-s") if grep "$2" $SRV_OUT >/dev/null; then :; else fail "-s $2" return fi ;; "-c") if grep "$2" $CLI_OUT >/dev/null; then :; else fail "-c $2" return fi ;; "-S") if grep "$2" $SRV_OUT >/dev/null; then fail "-S $2" return fi ;; "-C") if grep "$2" $CLI_OUT >/dev/null; then fail "-C $2" return fi ;; *) echo "Unknown test: $1" >&2 exit 1 esac shift 2 done # check valgrind's results if [ "$MEMCHECK" -gt 0 ]; then if is_polar "$SRV_CMD" && has_mem_err $SRV_OUT; then fail "Server has memory errors" return fi if is_polar "$CLI_CMD" && has_mem_err $CLI_OUT; then fail "Client has memory errors" return fi fi # if we're here, everything is ok echo "PASS" rm -f $SRV_OUT $CLI_OUT } cleanup() { rm -f $CLI_OUT $SRV_OUT $SESSION kill $SRV_PID >/dev/null 2>&1 kill $WATCHDOG_PID >/dev/null 2>&1 exit 1 } # # MAIN # get_options "$@" # sanity checks, avoid an avalanche of errors if [ ! -x "$P_SRV" ]; then echo "Command '$P_SRV' is not an executable file" exit 1 fi if [ ! -x "$P_CLI" ]; then echo "Command '$P_CLI' is not an executable file" exit 1 fi if which $OPENSSL_CMD >/dev/null 2>&1; then :; else echo "Command '$OPENSSL_CMD' not found" exit 1 fi # used by watchdog MAIN_PID="$$" # be more patient with valgrind if [ "$MEMCHECK" -gt 0 ]; then START_DELAY=3 DOG_DELAY=30 else START_DELAY=1 DOG_DELAY=10 fi # Pick a "unique" port in the range 10000-19999. PORT="0000$$" PORT="1$(echo $PORT | tail -c 5)" # fix commands to use this port P_SRV="$P_SRV server_port=$PORT" P_CLI="$P_CLI server_port=$PORT" O_SRV="$O_SRV -accept $PORT" O_CLI="$O_CLI -connect localhost:$PORT" # Also pick a unique name for intermediate files SRV_OUT="srv_out.$$" CLI_OUT="cli_out.$$" SESSION="session.$$" trap cleanup INT TERM HUP # Test for SSLv2 ClientHello run_test "SSLv2 ClientHello #0 (reference)" \ "$P_SRV debug_level=3" \ "$O_CLI -no_ssl2" \ 0 \ -S "parse client hello v2" \ -S "ssl_handshake returned" # Adding a SSL2-only suite makes OpenSSL client send SSLv2 ClientHello run_test "SSLv2 ClientHello #1 (actual test)" \ "$P_SRV debug_level=3" \ "$O_CLI -cipher 'DES-CBC-MD5:ALL'" \ 0 \ -s "parse client hello v2" \ -S "ssl_handshake returned" # Tests for Truncated HMAC extension run_test "Truncated HMAC #0" \ "$P_SRV debug_level=5" \ "$P_CLI trunc_hmac=0 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -s "dumping 'computed mac' (20 bytes)" run_test "Truncated HMAC #1" \ "$P_SRV debug_level=5" \ "$P_CLI trunc_hmac=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -s "dumping 'computed mac' (10 bytes)" # Tests for Session Tickets run_test "Session resume using tickets #1 (basic)" \ "$P_SRV debug_level=4 tickets=1" \ "$P_CLI debug_level=4 tickets=1 reconnect=1" \ 0 \ -c "client hello, adding session ticket extension" \ -s "found session ticket extension" \ -s "server hello, adding session ticket extension" \ -c "found session_ticket extension" \ -c "parse new session ticket" \ -S "session successfully restored from cache" \ -s "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using tickets #2 (cache disabled)" \ "$P_SRV debug_level=4 tickets=1 cache_max=0" \ "$P_CLI debug_level=4 tickets=1 reconnect=1" \ 0 \ -c "client hello, adding session ticket extension" \ -s "found session ticket extension" \ -s "server hello, adding session ticket extension" \ -c "found session_ticket extension" \ -c "parse new session ticket" \ -S "session successfully restored from cache" \ -s "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using tickets #3 (timeout)" \ "$P_SRV debug_level=4 tickets=1 cache_max=0 ticket_timeout=1" \ "$P_CLI debug_level=4 tickets=1 reconnect=1 reco_delay=2" \ 0 \ -c "client hello, adding session ticket extension" \ -s "found session ticket extension" \ -s "server hello, adding session ticket extension" \ -c "found session_ticket extension" \ -c "parse new session ticket" \ -S "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -S "a session has been resumed" \ -C "a session has been resumed" run_test "Session resume using tickets #4 (openssl server)" \ "$O_SRV" \ "$P_CLI debug_level=4 tickets=1 reconnect=1" \ 0 \ -c "client hello, adding session ticket extension" \ -c "found session_ticket extension" \ -c "parse new session ticket" \ -c "a session has been resumed" run_test "Session resume using tickets #5 (openssl client)" \ "$P_SRV debug_level=4 tickets=1" \ "( $O_CLI -sess_out $SESSION; \ $O_CLI -sess_in $SESSION; \ rm -f $SESSION )" \ 0 \ -s "found session ticket extension" \ -s "server hello, adding session ticket extension" \ -S "session successfully restored from cache" \ -s "session successfully restored from ticket" \ -s "a session has been resumed" # Tests for Session Resume based on session-ID and cache run_test "Session resume using cache #1 (tickets enabled on client)" \ "$P_SRV debug_level=4 tickets=0" \ "$P_CLI debug_level=4 tickets=1 reconnect=1" \ 0 \ -c "client hello, adding session ticket extension" \ -s "found session ticket extension" \ -S "server hello, adding session ticket extension" \ -C "found session_ticket extension" \ -C "parse new session ticket" \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache #2 (tickets enabled on server)" \ "$P_SRV debug_level=4 tickets=1" \ "$P_CLI debug_level=4 tickets=0 reconnect=1" \ 0 \ -C "client hello, adding session ticket extension" \ -S "found session ticket extension" \ -S "server hello, adding session ticket extension" \ -C "found session_ticket extension" \ -C "parse new session ticket" \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache #3 (cache_max=0)" \ "$P_SRV debug_level=4 tickets=0 cache_max=0" \ "$P_CLI debug_level=4 tickets=0 reconnect=1" \ 0 \ -S "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -S "a session has been resumed" \ -C "a session has been resumed" run_test "Session resume using cache #4 (cache_max=1)" \ "$P_SRV debug_level=4 tickets=0 cache_max=1" \ "$P_CLI debug_level=4 tickets=0 reconnect=1" \ 0 \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache #5 (timemout > delay)" \ "$P_SRV debug_level=4 tickets=0" \ "$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=0" \ 0 \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache #6 (timeout < delay)" \ "$P_SRV debug_level=4 tickets=0 cache_timeout=1" \ "$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=2" \ 0 \ -S "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -S "a session has been resumed" \ -C "a session has been resumed" run_test "Session resume using cache #7 (no timeout)" \ "$P_SRV debug_level=4 tickets=0 cache_timeout=0" \ "$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=2" \ 0 \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache #8 (openssl client)" \ "$P_SRV debug_level=4 tickets=0" \ "( $O_CLI -sess_out $SESSION; \ $O_CLI -sess_in $SESSION; \ rm -f $SESSION )" \ 0 \ -s "found session ticket extension" \ -S "server hello, adding session ticket extension" \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" run_test "Session resume using cache #9 (openssl server)" \ "$O_SRV" \ "$P_CLI debug_level=4 tickets=0 reconnect=1" \ 0 \ -C "found session_ticket extension" \ -C "parse new session ticket" \ -c "a session has been resumed" # Tests for Max Fragment Length extension run_test "Max fragment length #1" \ "$P_SRV debug_level=4" \ "$P_CLI debug_level=4" \ 0 \ -C "client hello, adding max_fragment_length extension" \ -S "found max fragment length extension" \ -S "server hello, max_fragment_length extension" \ -C "found max_fragment_length extension" run_test "Max fragment length #2" \ "$P_SRV debug_level=4" \ "$P_CLI debug_level=4 max_frag_len=4096" \ 0 \ -c "client hello, adding max_fragment_length extension" \ -s "found max fragment length extension" \ -s "server hello, max_fragment_length extension" \ -c "found max_fragment_length extension" run_test "Max fragment length #3" \ "$P_SRV debug_level=4 max_frag_len=4096" \ "$P_CLI debug_level=4" \ 0 \ -C "client hello, adding max_fragment_length extension" \ -S "found max fragment length extension" \ -S "server hello, max_fragment_length extension" \ -C "found max_fragment_length extension" # Tests for renegotiation run_test "Renegotiation #0 (none)" \ "$P_SRV debug_level=4" \ "$P_CLI debug_level=4" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -S "write hello request" run_test "Renegotiation #1 (enabled, client-initiated)" \ "$P_SRV debug_level=4 renegotiation=1" \ "$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -S "write hello request" run_test "Renegotiation #2 (enabled, server-initiated)" \ "$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \ "$P_CLI debug_level=4 renegotiation=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" run_test "Renegotiation #3 (enabled, double)" \ "$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \ "$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" run_test "Renegotiation #4 (client-initiated, server-rejected)" \ "$P_SRV debug_level=4 renegotiation=0" \ "$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \ 1 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -S "=> renegotiate" \ -S "write hello request" run_test "Renegotiation #5 (server-initiated, client-rejected)" \ "$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \ "$P_CLI debug_level=4 renegotiation=0" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -s "write hello request" \ -s "SSL - An unexpected message was received from our peer" \ -s "failed" # Tests for auth_mode run_test "Authentication #1 (server badcert, client required)" \ "$P_SRV crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ "$P_CLI debug_level=2 auth_mode=required" \ 1 \ -c "x509_verify_cert() returned" \ -c "! self-signed or not signed by a trusted CA" \ -c "! ssl_handshake returned" \ -c "X509 - Certificate verification failed" run_test "Authentication #2 (server badcert, client optional)" \ "$P_SRV crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ "$P_CLI debug_level=2 auth_mode=optional" \ 0 \ -c "x509_verify_cert() returned" \ -c "! self-signed or not signed by a trusted CA" \ -C "! ssl_handshake returned" \ -C "X509 - Certificate verification failed" run_test "Authentication #3 (server badcert, client none)" \ "$P_SRV crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ "$P_CLI debug_level=2 auth_mode=none" \ 0 \ -C "x509_verify_cert() returned" \ -C "! self-signed or not signed by a trusted CA" \ -C "! ssl_handshake returned" \ -C "X509 - Certificate verification failed" run_test "Authentication #4 (client badcert, server required)" \ "$P_SRV debug_level=4 auth_mode=required" \ "$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ 1 \ -S "skip write certificate request" \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate" \ -C "skip write certificate verify" \ -S "skip parse certificate verify" \ -s "x509_verify_cert() returned" \ -S "! self-signed or not signed by a trusted CA" \ -s "! ssl_handshake returned" \ -c "! ssl_handshake returned" \ -s "X509 - Certificate verification failed" run_test "Authentication #5 (client badcert, server optional)" \ "$P_SRV debug_level=4 auth_mode=optional" \ "$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ 0 \ -S "skip write certificate request" \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate" \ -C "skip write certificate verify" \ -S "skip parse certificate verify" \ -s "x509_verify_cert() returned" \ -s "! self-signed or not signed by a trusted CA" \ -S "! ssl_handshake returned" \ -C "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" run_test "Authentication #6 (client badcert, server none)" \ "$P_SRV debug_level=4 auth_mode=none" \ "$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ 0 \ -s "skip write certificate request" \ -C "skip parse certificate request" \ -c "got no certificate request" \ -c "skip write certificate" \ -c "skip write certificate verify" \ -s "skip parse certificate verify" \ -S "x509_verify_cert() returned" \ -S "! self-signed or not signed by a trusted CA" \ -S "! ssl_handshake returned" \ -C "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" run_test "Authentication #7 (client no cert, server optional)" \ "$P_SRV debug_level=4 auth_mode=optional" \ "$P_CLI debug_level=4 crt_file=none key_file=none" \ 0 \ -S "skip write certificate request" \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate$" \ -C "got no certificate to send" \ -S "SSLv3 client has no certificate" \ -c "skip write certificate verify" \ -s "skip parse certificate verify" \ -s "! no client certificate sent" \ -S "! ssl_handshake returned" \ -C "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" run_test "Authentication #8 (openssl client no cert, server optional)" \ "$P_SRV debug_level=4 auth_mode=optional" \ "$O_CLI" \ 0 \ -S "skip write certificate request" \ -s "skip parse certificate verify" \ -s "! no client certificate sent" \ -S "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" run_test "Authentication #9 (client no cert, openssl server optional)" \ "$O_SRV -verify 10" \ "$P_CLI debug_level=4 crt_file=none key_file=none" \ 0 \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate$" \ -c "skip write certificate verify" \ -C "! ssl_handshake returned" run_test "Authentication #10 (client no cert, ssl3)" \ "$P_SRV debug_level=4 auth_mode=optional force_version=ssl3" \ "$P_CLI debug_level=4 crt_file=none key_file=none" \ 0 \ -S "skip write certificate request" \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate$" \ -c "skip write certificate verify" \ -c "got no certificate to send" \ -s "SSLv3 client has no certificate" \ -s "skip parse certificate verify" \ -s "! no client certificate sent" \ -S "! ssl_handshake returned" \ -C "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" # tests for SNI run_test "SNI #0 (no SNI callback)" \ "$P_SRV debug_level=4 server_addr=127.0.0.1 \ crt_file=data_files/server5.crt key_file=data_files/server5.key" \ "$P_CLI debug_level=0 server_addr=127.0.0.1 \ server_name=localhost" \ 0 \ -S "parse ServerName extension" \ -c "issuer name *: C=NL, O=PolarSSL, CN=Polarssl Test EC CA" \ -c "subject name *: C=NL, O=PolarSSL, CN=localhost" run_test "SNI #1 (matching cert 1)" \ "$P_SRV debug_level=4 server_addr=127.0.0.1 \ crt_file=data_files/server5.crt key_file=data_files/server5.key \ sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ "$P_CLI debug_level=0 server_addr=127.0.0.1 \ server_name=localhost" \ 0 \ -s "parse ServerName extension" \ -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \ -c "subject name *: C=NL, O=PolarSSL, CN=localhost" run_test "SNI #2 (matching cert 2)" \ "$P_SRV debug_level=4 server_addr=127.0.0.1 \ crt_file=data_files/server5.crt key_file=data_files/server5.key \ sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ "$P_CLI debug_level=0 server_addr=127.0.0.1 \ server_name=polarssl.example" \ 0 \ -s "parse ServerName extension" \ -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \ -c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example" run_test "SNI #3 (no matching cert)" \ "$P_SRV debug_level=4 server_addr=127.0.0.1 \ crt_file=data_files/server5.crt key_file=data_files/server5.key \ sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ "$P_CLI debug_level=0 server_addr=127.0.0.1 \ server_name=nonesuch.example" \ 1 \ -s "parse ServerName extension" \ -s "ssl_sni_wrapper() returned" \ -s "ssl_handshake returned" \ -c "ssl_handshake returned" \ -c "SSL - A fatal alert message was received from our peer" # Tests for non-blocking I/O: exercise a variety of handshake flows run_test "Non-blocking I/O #1 (basic handshake)" \ "$P_SRV nbio=2 tickets=0 auth_mode=none" \ "$P_CLI nbio=2 tickets=0" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O #2 (client auth)" \ "$P_SRV nbio=2 tickets=0 auth_mode=required" \ "$P_CLI nbio=2 tickets=0" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O #3 (ticket)" \ "$P_SRV nbio=2 tickets=1 auth_mode=none" \ "$P_CLI nbio=2 tickets=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O #4 (ticket + client auth)" \ "$P_SRV nbio=2 tickets=1 auth_mode=required" \ "$P_CLI nbio=2 tickets=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O #5 (ticket + client auth + resume)" \ "$P_SRV nbio=2 tickets=1 auth_mode=required" \ "$P_CLI nbio=2 tickets=1 reconnect=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O #6 (ticket + resume)" \ "$P_SRV nbio=2 tickets=1 auth_mode=none" \ "$P_CLI nbio=2 tickets=1 reconnect=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O #7 (session-id resume)" \ "$P_SRV nbio=2 tickets=0 auth_mode=none" \ "$P_CLI nbio=2 tickets=0 reconnect=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" # Tests for version negotiation run_test "Version check #1 (all -> 1.2)" \ "$P_SRV" \ "$P_CLI" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.2" \ -c "Protocol is TLSv1.2" run_test "Version check #2 (cli max 1.1 -> 1.1)" \ "$P_SRV" \ "$P_CLI max_version=tls1_1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check #3 (srv max 1.1 -> 1.1)" \ "$P_SRV max_version=tls1_1" \ "$P_CLI" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check #4 (cli+srv max 1.1 -> 1.1)" \ "$P_SRV max_version=tls1_1" \ "$P_CLI max_version=tls1_1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check #5 (cli max 1.1, srv min 1.1 -> 1.1)" \ "$P_SRV min_version=tls1_1" \ "$P_CLI max_version=tls1_1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check #6 (cli min 1.1, srv max 1.1 -> 1.1)" \ "$P_SRV max_version=tls1_1" \ "$P_CLI min_version=tls1_1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check #7 (cli min 1.2, srv max 1.1 -> fail)" \ "$P_SRV max_version=tls1_1" \ "$P_CLI min_version=tls1_2" \ 1 \ -s "ssl_handshake returned" \ -c "ssl_handshake returned" \ -c "SSL - Handshake protocol not within min/max boundaries" run_test "Version check #8 (srv min 1.2, cli max 1.1 -> fail)" \ "$P_SRV min_version=tls1_2" \ "$P_CLI max_version=tls1_1" \ 1 \ -s "ssl_handshake returned" \ -c "ssl_handshake returned" \ -s "SSL - Handshake protocol not within min/max boundaries" # Tests for ALPN extension if grep '^#define POLARSSL_SSL_ALPN' $CONFIG_H >/dev/null; then run_test "ALPN #0 (none)" \ "$P_SRV debug_level=4" \ "$P_CLI debug_level=4" \ 0 \ -C "client hello, adding alpn extension" \ -S "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -S "server hello, adding alpn extension" \ -C "found alpn extension " \ -C "Application Layer Protocol is" \ -S "Application Layer Protocol is" run_test "ALPN #1 (client only)" \ "$P_SRV debug_level=4" \ "$P_CLI debug_level=4 alpn=abc,1234" \ 0 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -S "server hello, adding alpn extension" \ -C "found alpn extension " \ -c "Application Layer Protocol is (none)" \ -S "Application Layer Protocol is" run_test "ALPN #2 (server only)" \ "$P_SRV debug_level=4 alpn=abc,1234" \ "$P_CLI debug_level=4" \ 0 \ -C "client hello, adding alpn extension" \ -S "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -S "server hello, adding alpn extension" \ -C "found alpn extension " \ -C "Application Layer Protocol is" \ -s "Application Layer Protocol is (none)" run_test "ALPN #3 (both, common cli1-srv1)" \ "$P_SRV debug_level=4 alpn=abc,1234" \ "$P_CLI debug_level=4 alpn=abc,1234" \ 0 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -s "server hello, adding alpn extension" \ -c "found alpn extension" \ -c "Application Layer Protocol is abc" \ -s "Application Layer Protocol is abc" run_test "ALPN #4 (both, common cli2-srv1)" \ "$P_SRV debug_level=4 alpn=abc,1234" \ "$P_CLI debug_level=4 alpn=1234,abc" \ 0 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -s "server hello, adding alpn extension" \ -c "found alpn extension" \ -c "Application Layer Protocol is abc" \ -s "Application Layer Protocol is abc" run_test "ALPN #5 (both, common cli1-srv2)" \ "$P_SRV debug_level=4 alpn=abc,1234" \ "$P_CLI debug_level=4 alpn=1234,abcde" \ 0 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -s "server hello, adding alpn extension" \ -c "found alpn extension" \ -c "Application Layer Protocol is 1234" \ -s "Application Layer Protocol is 1234" run_test "ALPN #6 (both, no common)" \ "$P_SRV debug_level=4 alpn=abc,123" \ "$P_CLI debug_level=4 alpn=1234,abcde" \ 1 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -c "got an alert message, type: \\[2:120]" \ -S "server hello, adding alpn extension" \ -C "found alpn extension" \ -C "Application Layer Protocol is 1234" \ -S "Application Layer Protocol is 1234" fi # Tests for keyUsage in leaf certificates, part 1: # server-side certificate/suite selection run_test "keyUsage srv #1 (RSA, digitalSignature -> (EC)DHE-RSA)" \ "$P_SRV key_file=data_files/server2.key \ crt_file=data_files/server2.ku-ds.crt" \ "$P_CLI" \ 0 \ -c "Ciphersuite is TLS-[EC]*DHE-RSA-WITH-" run_test "keyUsage srv #2 (RSA, keyEncipherment -> RSA)" \ "$P_SRV key_file=data_files/server2.key \ crt_file=data_files/server2.ku-ke.crt" \ "$P_CLI" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-" # add psk to leave an option for client to send SERVERQUIT run_test "keyUsage srv #3 (RSA, keyAgreement -> fail)" \ "$P_SRV psk=abc123 key_file=data_files/server2.key \ crt_file=data_files/server2.ku-ka.crt" \ "$P_CLI psk=badbad" \ 1 \ -C "Ciphersuite is " run_test "keyUsage srv #4 (ECDSA, digitalSignature -> ECDHE-ECDSA)" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.ku-ds.crt" \ "$P_CLI" \ 0 \ -c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-" run_test "keyUsage srv #5 (ECDSA, keyAgreement -> ECDH-)" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.ku-ka.crt" \ "$P_CLI" \ 0 \ -c "Ciphersuite is TLS-ECDH-" # add psk to leave an option for client to send SERVERQUIT run_test "keyUsage srv #6 (ECDSA, keyEncipherment -> fail)" \ "$P_SRV psk=abc123 key_file=data_files/server5.key \ crt_file=data_files/server5.ku-ke.crt" \ "$P_CLI psk=badbad" \ 1 \ -C "Ciphersuite is " # Tests for keyUsage in leaf certificates, part 2: # client-side checking of server cert run_test "keyUsage cli #1 (DigitalSignature+KeyEncipherment, RSA: OK)" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ds_ke.crt" \ "$P_CLI debug_level=2 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "keyUsage cli #2 (DigitalSignature+KeyEncipherment, DHE-RSA: OK)" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ds_ke.crt" \ "$P_CLI debug_level=2 \ force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "keyUsage cli #3 (KeyEncipherment, RSA: OK)" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ke.crt" \ "$P_CLI debug_level=2 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "keyUsage cli #4 (KeyEncipherment, DHE-RSA: fail)" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ke.crt" \ "$P_CLI debug_level=2 \ force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ 1 \ -c "bad certificate (usage extensions)" \ -c "Processing of the Certificate handshake message failed" \ -C "Ciphersuite is TLS-" run_test "keyUsage cli #5 (DigitalSignature, DHE-RSA: OK)" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ds.crt" \ "$P_CLI debug_level=2 \ force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "keyUsage cli #5 (DigitalSignature, RSA: fail)" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ds.crt" \ "$P_CLI debug_level=2 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 1 \ -c "bad certificate (usage extensions)" \ -c "Processing of the Certificate handshake message failed" \ -C "Ciphersuite is TLS-" # Tests for keyUsage in leaf certificates, part 3: # server-side checking of client cert run_test "keyUsage cli-auth #1 (RSA, DigitalSignature: OK)" \ "$P_SRV debug_level=2 auth_mode=optional" \ "$O_CLI -key data_files/server2.key \ -cert data_files/server2.ku-ds.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "keyUsage cli-auth #2 (RSA, KeyEncipherment: fail (soft))" \ "$P_SRV debug_level=2 auth_mode=optional" \ "$O_CLI -key data_files/server2.key \ -cert data_files/server2.ku-ke.crt" \ 0 \ -s "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "keyUsage cli-auth #3 (RSA, KeyEncipherment: fail (hard))" \ "$P_SRV debug_level=2 auth_mode=required" \ "$O_CLI -key data_files/server2.key \ -cert data_files/server2.ku-ke.crt" \ 1 \ -s "bad certificate (usage extensions)" \ -s "Processing of the Certificate handshake message failed" run_test "keyUsage cli-auth #4 (ECDSA, DigitalSignature: OK)" \ "$P_SRV debug_level=2 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.ku-ds.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "keyUsage cli-auth #5 (ECDSA, KeyAgreement: fail (soft))" \ "$P_SRV debug_level=2 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.ku-ka.crt" \ 0 \ -s "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" # Tests for extendedKeyUsage, part 1: server-side certificate/suite selection run_test "extKeyUsage srv #1 (serverAuth -> OK)" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.eku-srv.crt" \ "$P_CLI" \ 0 run_test "extKeyUsage srv #2 (serverAuth,clientAuth -> OK)" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.eku-srv.crt" \ "$P_CLI" \ 0 run_test "extKeyUsage srv #3 (codeSign,anyEKU -> OK)" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.eku-cs_any.crt" \ "$P_CLI" \ 0 # add psk to leave an option for client to send SERVERQUIT run_test "extKeyUsage srv #4 (codeSign -> fail)" \ "$P_SRV psk=abc123 key_file=data_files/server5.key \ crt_file=data_files/server5.eku-cli.crt" \ "$P_CLI psk=badbad" \ 1 # Tests for extendedKeyUsage, part 2: client-side checking of server cert run_test "extKeyUsage cli #1 (serverAuth -> OK)" \ "$O_SRV -key data_files/server5.key \ -cert data_files/server5.eku-srv.crt" \ "$P_CLI debug_level=2" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "extKeyUsage cli #2 (serverAuth,clientAuth -> OK)" \ "$O_SRV -key data_files/server5.key \ -cert data_files/server5.eku-srv_cli.crt" \ "$P_CLI debug_level=2" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "extKeyUsage cli #3 (codeSign,anyEKU -> OK)" \ "$O_SRV -key data_files/server5.key \ -cert data_files/server5.eku-cs_any.crt" \ "$P_CLI debug_level=2" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "extKeyUsage cli #4 (codeSign -> fail)" \ "$O_SRV -key data_files/server5.key \ -cert data_files/server5.eku-cs.crt" \ "$P_CLI debug_level=2" \ 1 \ -c "bad certificate (usage extensions)" \ -c "Processing of the Certificate handshake message failed" \ -C "Ciphersuite is TLS-" # Tests for extendedKeyUsage, part 3: server-side checking of client cert run_test "extKeyUsage cli-auth #1 (clientAuth -> OK)" \ "$P_SRV debug_level=2 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-cli.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "extKeyUsage cli-auth #2 (serverAuth,clientAuth -> OK)" \ "$P_SRV debug_level=2 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-srv_cli.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "extKeyUsage cli-auth #3 (codeSign,anyEKU -> OK)" \ "$P_SRV debug_level=2 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-cs_any.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "extKeyUsage cli-auth #4 (codeSign -> fail (soft))" \ "$P_SRV debug_level=2 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-cs.crt" \ 0 \ -s "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "extKeyUsage cli-auth #4b (codeSign -> fail (hard))" \ "$P_SRV debug_level=2 auth_mode=required" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-cs.crt" \ 1 \ -s "bad certificate (usage extensions)" \ -s "Processing of the Certificate handshake message failed" # Tests for DHM parameters loading run_test "DHM parameters #0 (reference)" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ debug_level=3" \ 0 \ -c "value of 'DHM: P ' (2048 bits)" \ -c "value of 'DHM: G ' (2048 bits)" run_test "DHM parameters #1 (other parameters)" \ "$P_SRV dhm_file=data_files/dhparams.pem" \ "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ debug_level=3" \ 0 \ -c "value of 'DHM: P ' (1024 bits)" \ -c "value of 'DHM: G ' (2 bits)" # Tests for PSK callback run_test "PSK callback #0a (psk, no callback)" \ "$P_SRV psk=abc123 psk_identity=foo" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=foo psk=abc123" \ 0 \ -S "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback #0b (no psk, no callback)" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=foo psk=abc123" \ 1 \ -s "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback #1 (callback overrides other settings)" \ "$P_SRV psk=abc123 psk_identity=foo psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=foo psk=abc123" \ 1 \ -S "SSL - The server has no ciphersuites in common" \ -s "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback #2 (first id matches)" \ "$P_SRV psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=abc psk=dead" \ 0 \ -S "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback #3 (second id matches)" \ "$P_SRV psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=def psk=beef" \ 0 \ -S "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback #4 (no match)" \ "$P_SRV psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=ghi psk=beef" \ 1 \ -S "SSL - The server has no ciphersuites in common" \ -s "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback #5 (wrong key)" \ "$P_SRV psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=abc psk=beef" \ 1 \ -S "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -s "SSL - Verification of the message MAC failed" # Tests for ciphersuites per version run_test "Per-version suites #1" \ "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI force_version=ssl3" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-3DES-EDE-CBC-SHA" run_test "Per-version suites #2" \ "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI force_version=tls1" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-RC4-128-SHA" run_test "Per-version suites #3" \ "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI force_version=tls1_1" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-AES-128-CBC-SHA" run_test "Per-version suites #4" \ "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI force_version=tls1_2" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-AES-128-GCM-SHA256" # Tests for ssl_get_bytes_avail() run_test "ssl_get_bytes_avail #1 (no extra data)" \ "$P_SRV" \ "$P_CLI request_size=100" \ 0 \ -s "Read from client: 100 bytes read$" run_test "ssl_get_bytes_avail #2 (extra data)" \ "$P_SRV" \ "$P_CLI request_size=500" \ 0 \ -s "Read from client: 500 bytes read (.*+.*)" # Tests for small packets run_test "Small packet SSLv3 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=ssl3 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet SSLv3 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=ssl3 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.0 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.0 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.0 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 BlockCipher larger MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 AEAD" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 AEAD shorter tag" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \ 0 \ -s "Read from client: 1 bytes read" # Test for large packets run_test "Large packet SSLv3 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=ssl3 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet SSLv3 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=ssl3 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.0 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.0 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.0 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.1 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.1 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.1 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.1 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 BlockCipher larger MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 AEAD" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 AEAD shorter tag" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \ 0 \ -s "Read from client: 16384 bytes read" # Final report echo "------------------------------------------------------------------------" if [ $FAILS = 0 ]; then echo -n "PASSED" else echo -n "FAILED" fi PASSES=`echo $TESTS - $FAILS | bc` echo " ($PASSES / $TESTS tests)" exit $FAILS