---
title: Quickstart Guide
description: A guide designed to get you started with yuzu quickly.
---
## Table of Contents
* [Downloading and Installing yuzu](#downloading-and-installing-yuzu)
* [Hardware Requirements](#hardware-requirements)
* [yuzu Quickstart Guide](#yuzu-quickstart-guide)
* [Prerequisites](#prerequisites)
* [Preparing the microSD card](#preparing-the-microsd-card)
* [Booting into RCM](#booting-into-rcm)
* [Booting into Hekate](#booting-into-hekate)
* [Mounting the microSD card to your computer in Hekate](#mounting-the-microsd-card-to-your-computer-in-hekate)
* [Dumping the Decryption Keys](#dumping-prodkeys-and-titlekeys)
* [Backing up Switch NAND (Optional but Recommended)](#backing-up-switch-nand-optional-but-recommended)
* [Dumping System Update Firmware](#dumping-the-decryption-keys)
* [Dumping Cartridge Games](#dumping-cartridge-games)
* [Dumping Installed Titles (eShop)](#dumping-installed-titles-eshop)
* [Dumping Save Files (Optional)](#dumping-save-files-optional)
* [Rebooting the Switch Back to its Original State](#rebooting-the-switch-back-to-its-original-state)
* [Running yuzu](#running-yuzu)
## Downloading and Installing yuzu
{{< youtube j0fXerrGjF4 >}}
## Hardware Requirements
#### CPU:
Any x86_64 CPU with support for the FMA instruction set. 6 threads or more are recommended.
- Minimum: Intel Core i5-4430 / AMD Ryzen 3 1200
- Recommended: Intel Core i5-10400 / AMD Ryzen 5 3600
#### Dedicated graphics:
OpenGL 4.6 or Vulkan 1.1 compatible hardware and drivers are mandatory. Half-float support and 4GB of VRAM are recommended.
- Minimum for Linux: NVIDIA GeForce GT 1030 2GB / AMD Radeon R7 240 2GB
- Minimum for Windows: NVIDIA GeForce GT 1030 2GB / AMD Radeon RX 550 2GB
- Recommended: NVIDIA GeForce GTX 1650 4GB / AMD Radeon RX Vega 56 8GB
#### Integrated graphics:
Integrated graphics will produce very low performance. A dedicated GPU will produce better results on all scenarios.
This is only for listing iGPU support.
- Minimum for Linux: Intel HD 5300 / AMD Radeon R5 Graphics
- Minimum for Windows: Intel HD Graphics 520 / AMD Radeon Vega 3
- Recommended: Intel UHD Graphics 750 / AMD Radeon Vega 7
#### RAM:
Since an integrated GPU uses system RAM as its video memory (VRAM), our memory requirement in this configuration is higher.
- Minimum with dedicated graphics: 8GB
- Minimum with integrated graphics: 12GB
- Recommended: 16GB
#### Notes:
- Windows users are recommended to run Windows 10 1803 or newer to get the best performance.
- Our recommended specifications don't guarantee perfect performance in most games, but rather strive to provide a cost effective recommendation while still considering performance.
- Most games are playable on older Nvidia GPUs from the Fermi family (400 series) or later, but at least Pascal (1000 series) is strongly recommended.
- CPUs lacking the FMA instruction set will produce very poor results. Intel Core gen 3 series or older, AMD phenom II or older and all Pentium/Celeron/Atom CPUs will not produce optimal results.
- Mobile CPUs will not reach the same performance as their desktop counterparts due to thermal, power, and technical limitations.
- Old GCN 1.0 and GCN 2.0 Radeon GPUs on Linux require manually forcing the amdgpu kernel module.
- **GPUs must support OpenGL 4.6 & OpenGL Compatibility profile, or Vulkan 1.1 (or higher).**
To find out if your GPU meets these requirements, visit https://opengl.gpuinfo.org or https://vulkan.gpuinfo.org/ and check your GPU details.
Sample Image:
## yuzu Quickstart Guide
To start playing commercial games, yuzu needs a couple of system files from a **HACKABLE** Nintendo Switch console in order to play them properly.
This guide will help you copy all your system files, games, updates, and DLC from your switch to your computer and organize them in a format yuzu understands. This process should take about 60 to 90 minutes.
IMPORTANT NOTES:
While there are various approaches to hacking a Switch, this guide mainly covers the hacking process of early Switch models that are vulnerable to the most accessible `fusée-gelée` exploit. If you have hacked your console through other methods, then you might find some of the sections in this guide familiar and are welcome to skip them (assuming you have prior CFW knowledge). If not, you can join the yuzu Discord server for any additional assistance and details.
The following Switch models are patched from `fusée-gelée` and are unable to complete the first couple of steps:
Original Switch models manufactured after 2018. Visit Is My Switch Patched? to check if your console is patched.
Mariko Switch released in late 2019 a.k.a. Red Box Switch, HAC-001(-01)
Nintendo Switch Lite (HDH-001)
Nintendo Switch OLED Model (HEG-001)
## Prerequisites
- A **hackable** Nintendo Switch console (preferably a model that is vulnerable to the `fusée-gelée` exploit). Visit [Is My Switch Patched?](https://ismyswitchpatched.com/) to check if your console is not patched.
- A **microSD card** with at least `32 GB` of storage capacity. `64 GB` or higher is recommended.
- A **USB-C to USB-A** or **USB-C to USB-C cable** to connect your Switch to your computer.
- [TegraRcmGUI](https://github.com/eliboa/TegraRcmGUI/releases/latest) -- Download `TegraRcmGUI_v2.6_Installer.msi`
- [Hekate](https://github.com/CTCaer/hekate/releases/latest) -- Download `hekate_ctcaer_X.X.X_Nyx_X.X.X.zip`
- **Windows users:** Also download `nyx_usb_max_rate__run_only_once_per_windows_pc.reg` and run it for faster transfer speeds over USB. For details, see the **NOTE** section in the release page.
- This hekate configuration file -- [`hekate_ipl.ini`](./hekate_ipl.ini)
- [Atmosphére](https://github.com/Atmosphere-NX/Atmosphere/releases/latest) -- Download both `atmosphere-X.X.X-master-XXXXXXXX+hbl-X.X.X+hbmenu-X.X.X.zip` and `fusee.bin`.
- [Lockpick_RCM](https://github.com/shchmue/Lockpick_RCM/releases/latest) -- Download `Lockpick_RCM.bin`
- [nxdumptool](https://github.com/DarkMatterCore/nxdumptool/releases/latest) -- Download `nxdumptool.nro`
- [nxDumpFuse](https://github.com/oMaN-Rod/nxDumpFuse/releases/latest) -- Download `win-x64.zip`
- [TegraExplorer](https://github.com/suchmememanyskill/TegraExplorer/releases/latest) -- Download `TegraExplorer.bin`
- [Rufus](https://github.com/pbatard/rufus/releases/latest) -- Download `rufus-3.19.exe`
- [microSD Card Reader](https://www.amazon.com/dp/B006T9B6R2) -- If your computer has one built-in, you can use that.
- [RCM Jig](https://www.amazon.com/dp/B07J9JJRRG) -- We highly recommend one like this, but you could use any of the methods outlined [here.](https://noirscape.github.io/RCM-Guide/)
## Preparing the microSD Card
We will now format the microSD card to `FAT32` and place some files downloaded from the prerequisites section onto it.
- **NOTE:** The `exFAT` file system is not recommended as that format is prone to file corruption when the microSD card is being used from the Switch. Large capacity microSD cards are usually exFAT-formatted by default.
**Step 1:** Insert the microSD card into your computer.
- If you have a `Nintendo` folder in your microSD card, make a backup of it by copying it to your computer, as the formatting process will erase any data stored in the card.
**Step 2:** Open the **Rufus** formatting tool and set the following settings:
- **Device:** Your microSD card drive
- **Boot selection:** `Non-bootable`
- **File system:** `FAT32` or `Large FAT32`
- **Cluster size:** `64 kilobytes`
**Step 3:** Click on `START` and wait for the formatting process to finish.
**Step 4:** Move the previously copied `Nintendo` folder back into the microSD card.
**Step 1:** Extract the contents inside the `atmosphere-X.X.X-master-XXXXXXXX+hbl-X.X.X+hbmenu-X.X.X.zip` and `hekate_ctcaer_X.X.X_Nyx_X.X.X.zip` files into the root of your microSD card.
- **IMPORTANT:** Drag and drop the contents, do not create any new folders.
**Step 2:** Place the `hekate_ipl.ini` file into the `bootloader` folder.
**Step 3:** Place the `fusee.bin`, `Lockpick_RCM.bin` and `TegraExplorer.bin` files into the `payloads` folder (located inside the `bootloader` folder).
**Step 4:** Create a folder named `nxdumptool` within the `switch` folder and place the `nxdumptool.nro` file inside it.
**Step 5:** Eject the **microSD card** from your computer and insert it into the **microSD card slot** of your Switch.
Your **microSD card** should look like this:
{{< imgs
"./sd_template.png|The root of the microSD card"
>}}
## Booting into RCM
The Switch has a hidden recovery mode (RCM) which allows the execution of unsigned code (available only on models vulnerable to the `fusée-gelée` exploit).
**Step 1:** Run the **TegraRcmGUI installer** (`TegraRcmGUI_v2.6_Installer.msi`), go through the installation wizard, and start the program.
**Step 2:** In the `Settings` tab, click on `Install Driver` and follow the installation instructions.
**Step 3:** After the drivers have been installed, connect your Switch to your computer using a **USB-C cable**.
**Step 4:** **Power off** your Switch (not putting it into Sleep Mode) while it is still connected to your computer.
**Step 5:** Insert your **RCM jig** into the **right Joy-con rail**, make sure it is seated securely at the base.
**Step 6:** Hold **VOLUME +** and press the **Power** button.
If you see the Nintendo Switch icon turn **green** with `RCM O.K.` in the TegraRcmGUI window, your Switch has successfully booted into RCM mode. Else, if your Switch starts to turn on normally (Nintendo logo appears), go back to **Step 4** and try again.
## Booting into Hekate
**Step 1:** Extract the `hekate_ctcaer_X.X.X.bin` file from the `hekate_ctcaer_X.X.X_Nyx_X.X.X.zip` file you downloaded from the prerequisites to any accessible directory on your computer.
**Step 2:** Run TegraRcmGUI. In the `Payload` tab of TegraRcmGUI, click on the folder icon and navigate to the `hekate_ctcaer_X.X.X.bin` file you extracted earlier.
**Step 3:** Click on `Inject Payload` and your Switch will boot into the Hekate menu.
## Mounting the microSD card to your computer in Hekate
_**NOTE:** These steps will be used in other sections below. Do **not** follow this section yet if you are [booted into Hekate for the first time.](#booting-into-rcm) Skip to the [next section](#dumping-prod-keys-and-title-keys) for now._
4. We will now mount the microSD card as a drive from your Switch to your computer in Hekate, via USB.
- 4a. In the Hekate Home menu, tap on the `Tools` tab to show the Tools menu.
- 4b. Tap on `USB Tools`.
- 4c. Tap on `SD Card`. Your SD card should now be mounted as a drive to your computer.
To unmount the SD card: Safely eject the drive from your computer and tap on `Close` from your Switch's screen.
5. We will now return to the Hekate Home menu.
- 5a. Tap on `Close` again to return to the Tools menu.
- 5b. Tap on the `Home` tab to return to the Hekate Home menu.
## Dumping the Decryption Keys
We will now dump the decryption keys from your Switch so that yuzu is able to decrypt and open your game files.
**Step 1:** In the Hekate Home menu, tap on `Payloads`.
**Step 2:** Tap on `Lockpick_RCM.bin` in the list of payloads.
**Step 3:** After Lockpick_RCM has successfully booted, press the **Power** button to select `Dump from SysNAND`.
**Step 4:** After Lockpick_RCM has finished processing all the keys, please make note of the location of the key files, which are in `sd:/switch/prod.keys` and `sd:/switch/title.keys`.
**Step 6:** Press any button to return to the menu, then navigate with the **VOLUME +** / **VOLUME -** buttons to highlight and select `Reboot to hekate` using the **Power** button. You should now be booted back into Hekate.
## Backing up Switch NAND (Optional but Recommended)
7. We will now boot Hekate to dump your switch's NAND. This step is optional, but highly recommended to ensure you have a backup of your Switch's data in its internal storage.
- 7a. Boot your Nintendo Switch into [RCM mode](#booting-into-rcm) (steps 2c. to 2f.) and make sure it is connected to your computer.
- 7b. Boot into [Hekate](#booting-into-hekate) (steps 3b. to 3c.)
- 7c. When it has successfully booted into the Hekate Home menu, tap on the `Tools` tab and select `Backup eMMC`.
- 7d. Underneath the `Full` section, tap on `eMMC BOOT0 & BOOT1`. This may take a few seconds to load. After it is finished filling the progress bar it should say `Finished and verified!`. Beneath `Filepath:` you will see the location of the dump.
- 7e. Tap on `Close` and select `eMMC RAW GPP`. This should take some time as the Switch's `rawnand.bin` is quite large. If the progress bar appears to go backwards at some points or turn green, do not worry as this is Hekate verifying the data. This should take between 15-45 minutes depending on the quality/speed of your SD card and the default verification setting. Please keep note of the location the output file is placed.
- 7f. Tap on `Close` two times to return to the Tools menu.
- 7g. [Mount the SD card to your computer in Hekate](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 4b. to 4c.)
- 7h. Navigate to your SD card drive and copy the `backup` folder to your computer.
- 7i. Once you're done copying, [safely eject the SD card drive in your computer and return to the Hekate Home menu.](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 5a. to 5b.)
## Dumping System Update Firmware
8. Some games such as `Mario Kart 8 Deluxe` require the use of files found inside the `Nintendo Switch System Update Firmware` to be playable. In this step, we will now dump the firmware files from your Switch for use in yuzu.
- 8a. Boot your Nintendo Switch into [RCM mode](#booting-into-rcm) (steps 2c. to 2f.) and make sure it is connected to your computer.
- 8b. Boot into [Hekate](#booting-into-hekate) (steps 3b. to 3c.)
- 8c. When it has successfully booted into the Hekate Home menu, tap on `Payloads`. This will show a list of payloads.
- 8d. Tap on `TegraExplorer.bin` in the list of payloads.
- 8e. After TegraExplorer has successfully booted, navigate through the menu using the `VOL+/VOL-` buttons to highlight and select the `FirmwareDump.te` option by pressing the `POWER` button.
- 8f. Select the `Dump sysmmc` option
- 8g. Once the dumping process is finished, the `.nca` files will be located in your SD card at `sd:/tegraexplorer/Firmware/`.
- 8h. Press any button to return to the main menu.
- 8i. Select the `Reboot to bootloader/update.bin` option. You should now be booted back into Hekate.
- 8j. [Mount the SD card to your computer in Hekate](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 4a. to 4c.)
- 8k. Navigate to your SD card drive and copy the contents in the firmware folder (step 8f.) to `%YUZU_DIR%/nand/system/Contents/registered`. Alternatively, you can write `%appdata%\yuzu\nand\system\Contents\registered` in the address bar of a file explorer. The `registered` folder should be full of `.nca` files.
- 8l. Once you're done copying, [safely eject the SD card drive in your computer and return to the Hekate Home menu.](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 5a. to 5b.)
## Dumping Cartridge Games
9. We will now dump the `Cartridge Image (XCI)` file from your game cartridge(s), to use in yuzu. Insert the game cartridge of your choice.
- 9a. Boot your Nintendo Switch into [RCM mode](#booting-into-rcm) (steps 2c. to 2f.) and make sure it is connected to your computer.
- 9b. Boot into [Hekate](#booting-into-hekate) (steps 3b. to 3c.)
- 9c. When it has successfully booted into the Hekate Home menu, tap on `Payloads`. This will show a list of payloads.
- 9d. Tap on `fusee.bin` in the list of payloads.
- 9e. Your Switch will launch into Custom Firmware Mode (CFW), and once your Switch has booted into the HOME Menu, press and hold the `R` button on your controller and launch a game. This will launch the Homebrew Menu in `title override mode`.
- 9f. Either use the touchscreen or navigate using your controller, and select `nxdumptool`.
- 9g. Select the `Dump gamecard content` option.
- 9h. Select the `Cartridge Image (XCI) dump` option.
- 9i. Once the cartridge image has been dumped, press any button to return to the previous menu and then press `+` to return to the Homebrew Menu.
- 9j. Select `Reboot to Payload` and then press `-` on your controller to return to the Hekate Home menu.
- 9k. [Mount the SD card to your computer in Hekate](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 4a. to 4c.)
- 9l. Navigate to your SD card drive. XCI dumps are located under `sd:/switch/nxdumptool/XCI`.
- 9m. If your XCIs are dumped in parts with `.xc0`, `.xc1`, `.xc2`, etc extensions, use the `nxDumpMerger` tool you have downloaded in the prerequisites to assist in merging these parts into a complete XCI. If they were dumped as complete XCI files with the `.xci` extension, you can proceed to copy these to a game directory of your choice.
- 9n. Extract the contents of `nxDumpMerger_Windows.zip` into a new folder and start the program.
- 9o. Select the button with the triple dots `...` next to the `Input` field. This will open a file selector.
- 9p. Find and select one of the parts and click `Open`.
- 9q. Next, select the button with the triple dots `...` next to the `Output` field. This will open a folder selector.
- 9r. Select a folder where you would like your games stored in your computer and then click `Select Folder`. (**NOTE:** Do not select a folder inside the SD card or you will quickly run out of space and experience slow transfer speeds in the merging process.)
- 9s. After completing these steps, the parts are ready to be merged. Select `Merge Dump` and the program will merge the parts into a complete XCI located in the `Output` folder. Repeat these steps for all other games dumped as parts.
- 9t. Once you're done merging, [safely eject the SD card drive in your computer and return to the Hekate Home menu.](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 5a. to 5b.)
## Dumping Installed Titles (eShop)
10. We will now dump the `Nintendo Submission Package (NSP)` file from your installed eShop game(s), to use in yuzu.
- 10a. Boot your Nintendo Switch into [RCM mode](#booting-into-rcm) (steps 2c. to 2f.) and make sure it is connected to your computer.
- 10b. Boot into [Hekate](#booting-into-hekate) (steps 3b. to 3c.)
- 10c. When it has successfully booted into the Hekate menu, tap on `Payloads`. This will show a list of payloads.
- 10d. Tap on `fusee.bin` in the list of payloads.
- 10e. Your Switch will launch into Custom Firmware Mode (CFW), and once your Switch has booted into the home menu, press and hold the R button on your controller and launch a game. This will launch the Homebrew Menu in `title override mode`.
- 10f. Either use the touchscreen or navigate using your controller, and select `nxdumptool`.
- 10g. Select the `Dump installed SD Card / eMMC Content` option.
- 10h. Select the game you want to dump.
- 10i. Select the `Nintendo Submission Package (NSP) dump` option.
- 10j. If your game contains an update or DLC, you will see multiple dumping options such as `Dump base application NSP`, `Dump installed update NSP` or/and `Dump installed DLC NSP` in the next screen. Select `Dump base application NSP` to dump the base game.
- 10k. Select the `Start NSP dump process` option and wait for the dumping process to finish.
- 10l. Press the `B button` to return to the previous menu(s) and repeat the previous steps to dump the base, updates and DLC of all your games.
- 10m. Once all your games are dumped, press any button to return to the previous menu and then press `+` to return to the Homebrew Menu.
- 10n. Select `Reboot to Payload` and then press `-` on your controller to return to the Hekate Home menu.
- 10o. [Mount the SD card to your computer in Hekate](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 4a. to 4c.)
- 10p. Navigate to your SD card drive. NSP dumps are located under `sd:/switch/nxdumptool/NSP`.
- 10q. If your NSPs are dumped as folders with `00`, `01`, `02`, etc parts within them, use the `nxDumpMerger` tool you have downloaded in the prerequisites to assist in merging these parts into a complete NSP. If they were dumped as files, you can proceed to copy these to a game directory of your choice.
- 10r. Extract the contents of `nxDumpMerger` into a new folder and start the program. (Skip the extraction if you already followed step 9n.)
- 10s. Select the button with the triple dots `...` next to the `Input` field. This will open a file selector.
- 10t. Find a NSP that is dumped as a folder with parts. Select one of the parts within the folder and click `Open`.
- 10u. Next, select the button with the triple dots `...` next to the `Output` field. This will open a folder selector.
- 10v. Select a folder where you would like your games stored in your computer and then click `Select Folder`. (**NOTE:** Do not select a folder inside the SD card or you will quickly run out of space and experience slow transfer speeds in the merging process.)
- 10w. After completing these steps, the parts are ready to be merged. Select `Merge Dump` and the program will merge the parts into a complete NSP located in the `Output` folder. Repeat these steps for all folder NSPs.
- 10x. Once you're done merging, [safely eject the SD card drive in your computer and return to the Hekate Home menu.](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 5a. to 5b.)
## Dumping Save Files (Optional)
11. We will now dump the games' save files from your switch to use in yuzu.
- 11a. Download [JKSV.nro](https://github.com/J-D-K/JKSV/releases/latest)
- 11b. Boot your Nintendo Switch into [RCM mode](#booting-into-rcm) (steps 2c. to 2f.) and make sure it is connected to your computer.
- 11c. Boot into [Hekate](#booting-into-hekate) (steps 3b. to 3c.)
- 11d. [Mount the SD card to your computer in Hekate](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 4a. to 4c.)
- 11e. Navigate to your SD card drive and place the `JKSV.nro` file inside the `switch` folder.
- 11f. Once you're done, [safely eject the SD card drive in your computer and return to the Hekate Home menu.](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 5a. to 5b.)
- 11g. Tap on `Payloads`. This will show a list of payloads.
- 11h. Tap on `fusee.bin` in the list of payloads.
- 11i. Your Switch will launch into Custom Firmware Mode (CFW), and once your Switch has booted into the home menu, press and hold the `R` button on your controller and launch a game. This will launch the Homebrew Menu in `title override mode`.
- 11j. Either use the touchscreen or navigate using your controller, and choose `JKSV`.
- 11k. Move up or down to select a source to dump save data for a single game. (Most save files are stored under the user account of choice. Some save data are located under Device, such as Animal Crossing: New Horizons.)
- 11l. **For dumping all save data at once from selected source:** Press `X` and then select the `Dump All for ` option.
- 11m. **For dumping save data of a single game:** Press `A` and then select the game of choice, then press `A` again and select the `New` option.
- 11n. JKSV will being up the keyboard to set a name for your save data folder. By default, it generates a name containing the source name (user account, Device, etc.) alongside the date and time of when it was dumped, else you can name it to whatever you want. Once you're done, press `+` to dismiss the keyboard.
- 11o. Once you're done dumping, press `+` to close JKSV.
- 11p. Select `Reboot to Payload` and then press `-` on your controller to return to the Hekate menu.
- 11q. [Mount the SD card to your computer in Hekate](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 4a. to 4c.)
- 11r. Navigate to your SD card drive. Your save files will be located in `sd:/JKSV///`.
- 11s. Follow the instructions in the [How do I add a Save to my Game](https://yuzu-emu.org/wiki/faq/#how-do-i-add-a-save-to-my-game) section of our [FAQ.](https://yuzu-emu.org/wiki/faq/)
- 11t. Once you're done transferring your save files, [safely eject the SD card drive in your computer and return to the Hekate Home menu.](#mounting-the-microsd-card-to-your-computer-in-hekate) (steps 5a. to 5b.)
## Rebooting the Switch Back to its Original State
12. If you're done following the sections you needed for yuzu, we will now reboot the Switch back to its original state.
- 12a. From the Hekate Home Menu, tap on `Reboot`.
- 12b. Tap on `OFW`.
- 12c. Your Switch will now reboot into the original firmware.
## Running yuzu
9. We will now run yuzu to verify that your dumped keys and games are being read correctly.
- 9a. Run either the `yuzu` or `yuzu Early Access` shortcuts that were created by the yuzu installer tool.
- 9b. in yuzu, click on `+ Add New Game Directory` in the browser, and navigate to the folder where you placed your `XCI` or `NSP` files.
- 9c. To install game Updates and/or DLC. In yuzu, click `File >> install to NAND` and navigate to your dumped Update-DLC files. For more info refer to [How do I install game Updates or DLC](https://yuzu-emu.org/wiki/faq/#how-do-i-install-game-updates-or-dlc)
### If you need any help during this process or get a strange error during or while using yuzu, feel free to ask for help on the yuzu discord! Happy Emulating!