<p>The <ahref="https://www.onlyoffice.com/spreadsheet-editor.aspx"target="_blank"onclick="onhyperlinkclick(this)"><b>Spreadsheet Editor</b></a> allows you to insert images in the most popular formats into your worksheet. The following image formats are supported: <b>BMP</b>, <b>GIF</b>, <b>JPEG</b>, <b>JPG</b>, <b>PNG</b>.</p>
<li>the <b>Image from File</b> option will open the standard dialog window to select a file. Browse the hard disk drive of your computer to find the required file and click the <b>Open</b> button
<pclass="note">In the <em>online editor</em>, you can select several images at once.</p>
<li>the <b>Image from URL</b> option will open the window where you can enter the web address of the required image and click the <b>OK</b> button</li>
<liclass="onlineDocumentFeatures"> the <b>Image from Storage</b> option will open the <b>Select data source</b> window. Select an image stored on your portal and click the <b>OK</b> button</li>
<li>in the <b>Size</b> section, set the necessary <b>Width</b> and <b>Height</b> values. If the <b>Constant proportions</b><imgalt="Constant proportions icon"src="../images/constantproportions.png"/> button is clicked (in this case it looks like this <imgalt="Constant proportions icon activated"src="../images/constantproportionsactivated.png"/>), the width and height will be changed together preserving the original image aspect ratio. To restore the actual size of the added image, click the <b>Actual Size</b> button.</li>
<p>Click the <b>Crop</b> button to activate cropping handles which appear on the image corners and in the center of each side. Manually drag the handles to set the cropping area. You can move the mouse cursor over the cropping area border so that it turns into the Arrow <imgalt="Arrow"src="../images/arrow.png"/> icon and drag the area. </p>
<li>To crop a single side, drag the handle located in the center of this side.</li>
<li>To simultaneously crop two adjacent sides, drag one of the corner handles.</li>
<li>To equally crop two opposite sides of the image, hold down the <em>Ctrl</em> key when dragging the handle in the center of one of these sides. </li>
<li>To equally crop all sides of the image, hold down the <em>Ctrl</em> key when dragging any of the corner handles.</li>
</ul>
<p>When the cropping area is specified, click the <b>Crop</b> button once again, or press the <em>Esc</em> key, or click anywhere outside of the cropping area to apply the changes.</p>
<p>After the cropping area is selected, it's also possible to use the <b>Crop to shape</b>, <b>Fill</b> and <b>Fit</b> options available from the <b>Crop</b> drop-down menu. Click the <b>Crop</b> button once again and select the option you need: </p>
<li>If you select the <b>Crop to shape</b> option, the picture will fill a certain shape. You can select a shape from the gallery, which opens when you hover your mouse pointer over the <b>Crop to Shape</b> option. You can still use the <b>Fill</b> and <b>Fit</b> options to choose the way your picture matches the shape.</li>
<li>If you select the <b>Fill</b> option, the central part of the original image will be preserved and used to fill the selected cropping area, while other parts of the image will be removed.</li>
<li>If you select the <b>Fit</b> option, the image will be resized so that it fits the height or width of the cropping area. No parts of the original image will be removed, but empty spaces may appear within the selected cropping area.</li>
<p>When the image is selected, the <b>Shape settings</b><imgalt="Shape settings icon"src="../images/shape_settings_icon.png"/> icon is also available on the right. You can click this icon to open the <b>Shape settings</b> tab on the right sidebar and adjust the shape <ahref="../UsageInstructions/InsertAutoshapes.htm#shape_stroke"onclick="onhyperlinkclick(this)"><b>Line</b></a> type, its size and color as well as change the shape type by selecting another shape from the <b>Change Autoshape</b> menu. The shape of the image will change correspondingly.</p>
<p>To change its advanced settings, click the image with the right mouse button and select the <b>Image Advanced Settings</b> option from the right-click menu or just click the <b>Show advanced settings</b> link on the right sidebar. The image properties window will open:</p>
<p>The <b>Rotation</b> tab contains the following parameters:</p>
<ul>
<li><b>Angle</b> - use this option to rotate the image by an exactly specified angle. Enter the necessary value measured in degrees into the field or adjust it using the arrows on the right. </li>
<li><b>Flipped</b> - check the <b>Horizontally</b> box to flip the image horizontally (left to right) or check the <b>Vertically</b> box to flip the image vertically (upside down).</li>
<li><b>Move and size with cells</b> - this option allows you to snap the image to the cell behind it. If the cell moves (e.g. if you insert or delete some rows/columns), the image will be moved together with the cell. If you increase or decrease the width or height of the cell, the image will change its size as well.</li>
<li><b>Move but don't size with cells</b> - this option allows you to snap the image to the cell behind it preventing the image from being resized. If the cell moves, the image will be moved together with the cell, but if you change the cell size, the image dimensions remain unchanged.</li>
<li><b>Don't move or size with cells</b> - this option allows you to prevent the image from being moved or resized if the cell position or size was changed.</li>
<p>The <b>Alternative Text</b> tab allows you to specify the <b>Title</b> and the <b>Description</b> which will be read to people with vision or cognitive impairments to help them better understand what information the image contains.</p>
<p>You can provide a quick and easy access to a macro within a spreadsheet by assigning a macro to any image. Once you assign a macro, the image appears as a button control and you can run the macro whenever you click it.</p>
<p>To assign a macro:</p>
<ultype="circle">
<li>
Right-click the image to assign a macro to and choose the <b>Assign Macro</b> option from the drop-down menu.
<p><imgalt="Assign Macro on Menu"src="../images/assignmacro_rightclickimage.png"/></p>
</li>
<li>The <b>Assign Macro</b> dialogue will open</li>
<li>
Choose a macro from the list, or type in the macro name, and click <b>OK</b> to confirm.
