citra-canary/src/core/hle/kernel/ipc.cpp
Subv a7a5c5aa0d Kernel/IPC: Partially implement MappedBuffer translation.
Right now only MappedBuffers that only span a single page and are not aligned are implemented.

MappedBuffers are unmapped during the reply part of ReplyAndReceive. Only unmapping of ReadOnly buffers is currently implemented.
2018-01-23 08:27:00 -05:00

211 lines
9.1 KiB
C++

// Copyright 2017 Citra Emulator Project
// Licensed under GPLv2 or any later version
// Refer to the license.txt file included.
#include "common/alignment.h"
#include "core/hle/ipc.h"
#include "core/hle/kernel/handle_table.h"
#include "core/hle/kernel/ipc.h"
#include "core/hle/kernel/kernel.h"
#include "core/hle/kernel/memory.h"
#include "core/hle/kernel/process.h"
#include "core/hle/kernel/thread.h"
#include "core/memory.h"
namespace Kernel {
ResultCode TranslateCommandBuffer(SharedPtr<Thread> src_thread, SharedPtr<Thread> dst_thread,
VAddr src_address, VAddr dst_address, bool reply) {
auto& src_process = src_thread->owner_process;
auto& dst_process = dst_thread->owner_process;
IPC::Header header;
// TODO(Subv): Replace by Memory::Read32 when possible.
Memory::ReadBlock(*src_process, src_address, &header.raw, sizeof(header.raw));
size_t untranslated_size = 1u + header.normal_params_size;
size_t command_size = untranslated_size + header.translate_params_size;
// Note: The real kernel does not check that the command length fits into the IPC buffer area.
ASSERT(command_size <= IPC::COMMAND_BUFFER_LENGTH);
std::array<u32, IPC::COMMAND_BUFFER_LENGTH> cmd_buf;
Memory::ReadBlock(*src_process, src_address, cmd_buf.data(), command_size * sizeof(u32));
size_t i = untranslated_size;
while (i < command_size) {
u32 descriptor = cmd_buf[i];
i += 1;
switch (IPC::GetDescriptorType(descriptor)) {
case IPC::DescriptorType::CopyHandle:
case IPC::DescriptorType::MoveHandle: {
u32 num_handles = IPC::HandleNumberFromDesc(descriptor);
// Note: The real kernel does not check that the number of handles fits into the command
// buffer before writing them, only after finishing.
if (i + num_handles > command_size) {
return ResultCode(ErrCodes::CommandTooLarge, ErrorModule::OS,
ErrorSummary::InvalidState, ErrorLevel::Status);
}
for (u32 j = 0; j < num_handles; ++j) {
Handle handle = cmd_buf[i];
SharedPtr<Object> object = nullptr;
// Perform pseudo-handle detection here because by the time this function is called,
// the current thread and process are no longer the ones which created this IPC
// request, but the ones that are handling it.
if (handle == CurrentThread) {
object = src_thread;
} else if (handle == CurrentProcess) {
object = src_process;
} else if (handle != 0) {
object = g_handle_table.GetGeneric(handle);
if (descriptor == IPC::DescriptorType::MoveHandle) {
g_handle_table.Close(handle);
}
}
if (object == nullptr) {
// Note: The real kernel sets invalid translated handles to 0 in the target
// command buffer.
cmd_buf[i++] = 0;
continue;
}
auto result = g_handle_table.Create(std::move(object));
cmd_buf[i++] = result.ValueOr(0);
}
break;
}
case IPC::DescriptorType::CallingPid: {
cmd_buf[i++] = src_process->process_id;
break;
}
case IPC::DescriptorType::StaticBuffer: {
IPC::StaticBufferDescInfo bufferInfo{descriptor};
VAddr static_buffer_src_address = cmd_buf[i];
std::vector<u8> data(bufferInfo.size);
Memory::ReadBlock(*src_process, static_buffer_src_address, data.data(), data.size());
// Grab the address that the target thread set up to receive the response static buffer
// and write our data there. The static buffers area is located right after the command
// buffer area.
struct StaticBuffer {
IPC::StaticBufferDescInfo descriptor;
VAddr address;
};
static_assert(sizeof(StaticBuffer) == 8, "StaticBuffer struct has incorrect size.");
StaticBuffer target_buffer;
u32 static_buffer_offset = IPC::COMMAND_BUFFER_LENGTH * sizeof(u32) +
sizeof(StaticBuffer) * bufferInfo.buffer_id;
Memory::ReadBlock(*dst_process, dst_address + static_buffer_offset, &target_buffer,
sizeof(target_buffer));
// Note: The real kernel doesn't seem to have any error recovery mechanisms for this
// case.
ASSERT_MSG(target_buffer.descriptor.size >= data.size(),
"Static buffer data is too big");
Memory::WriteBlock(*dst_process, target_buffer.address, data.data(), data.size());
cmd_buf[i++] = target_buffer.address;
break;
}
case IPC::DescriptorType::MappedBuffer: {
IPC::MappedBufferDescInfo descInfo{descriptor};
VAddr source_address = cmd_buf[i];
size_t size = descInfo.size;
IPC::MappedBufferPermissions permissions = descInfo.perms;
VAddr page_start = Common::AlignDown(source_address, Memory::PAGE_SIZE);
u32 page_offset = source_address - page_start;
u32 num_pages =
Common::AlignUp(page_offset + size, Memory::PAGE_SIZE) >> Memory::PAGE_BITS;
ASSERT(num_pages >= 1);
if (reply) {
// TODO(Subv): Scan the target's command buffer to make sure that there was a
// MappedBuffer descriptor in the original request. The real kernel panics if you
// try to reply with an unsolicited MappedBuffer.
// Unmap the buffers. Readonly buffers do not need to be copied over to the target
// process again because they were (presumably) not modified. This behavior is
// consistent with the real kernel.
if (permissions == IPC::MappedBufferPermissions::R) {
ResultCode result = src_process->vm_manager.UnmapRange(
page_start, num_pages * Memory::PAGE_SIZE);
ASSERT(result == RESULT_SUCCESS);
}
ASSERT_MSG(permissions == IPC::MappedBufferPermissions::R,
"Unmapping Write MappedBuffers is unimplemented");
i += 1;
break;
}
VAddr target_address = 0;
auto IsPageAligned = [](VAddr address) -> bool {
return (address & Memory::PAGE_MASK) == 0;
};
// TODO(Subv): Support more than 1 page and aligned page mappings
ASSERT_MSG(
num_pages == 1 &&
(!IsPageAligned(source_address) || !IsPageAligned(source_address + size)),
"MappedBuffers of more than one page or aligned transfers are not implemented");
// TODO(Subv): Perform permission checks.
// TODO(Subv): Leave a page of Reserved memory before the first page and after the last
// page.
if (!IsPageAligned(source_address) ||
(num_pages == 1 && !IsPageAligned(source_address + size))) {
// If the address of the source buffer is not page-aligned or if the buffer doesn't
// fill an entire page, then we have to allocate a page of memory in the target
// process and copy over the data from the input buffer. This allocated buffer will
// be copied back to the source process and deallocated when the server replies to
// the request via ReplyAndReceive.
auto buffer = std::make_shared<std::vector<u8>>(Memory::PAGE_SIZE);
// Number of bytes until the next page.
size_t difference_to_page =
Common::AlignUp(source_address, Memory::PAGE_SIZE) - source_address;
// If the data fits in one page we can just copy the required size instead of the
// entire page.
size_t read_size = num_pages == 1 ? size : difference_to_page;
Memory::ReadBlock(*src_process, source_address, buffer->data() + page_offset,
read_size);
// Map the page into the target process' address space.
target_address = dst_process->vm_manager
.MapMemoryBlockToBase(
Memory::IPC_MAPPING_VADDR, Memory::IPC_MAPPING_SIZE,
buffer, 0, buffer->size(), Kernel::MemoryState::Shared)
.Unwrap();
}
cmd_buf[i++] = target_address + page_offset;
break;
}
default:
UNIMPLEMENTED_MSG("Unsupported handle translation: 0x%08X", descriptor);
}
}
Memory::WriteBlock(*dst_process, dst_address, cmd_buf.data(), command_size * sizeof(u32));
return RESULT_SUCCESS;
}
} // namespace Kernel