/// Specifies which texture unit to make active. The number of texture units is implementation dependent, but must be at least two. texture must be one of GL_TEXTURE, where i ranges from 0 to the larger of (GL_MAX_TEXTURE_COORDS - 1) and (GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS - 1). The initial value is GL_TEXTURE0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glActiveTexture")]
/// Specifies the alpha comparison function. Symbolic constants GL_NEVER, GL_LESS, GL_EQUAL, GL_LEQUAL, GL_GREATER, GL_NOTEQUAL, GL_GEQUAL, and GL_ALWAYS are accepted. The initial value is GL_ALWAYS.
/// </para>
/// </param>
/// <param name="ref">
/// <para>
/// Specifies the reference value that incoming alpha values are compared to. This value is clamped to the range [0,1], where 0 represents the lowest possible alpha value and 1 the highest possible value. The initial reference value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glAlphaFunc")]
/// Specifies how the red, green, blue, and alpha source blending factors are computed. The following symbolic constants are accepted: GL_ZERO, GL_ONE, GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR, GL_DST_COLOR, GL_ONE_MINUS_DST_COLOR, GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, GL_DST_ALPHA, GL_ONE_MINUS_DST_ALPHA, GL_CONSTANT_COLOR, GL_ONE_MINUS_CONSTANT_COLOR, GL_CONSTANT_ALPHA, GL_ONE_MINUS_CONSTANT_ALPHA, and GL_SRC_ALPHA_SATURATE. The initial value is GL_ONE.
/// </para>
/// </param>
/// <param name="dfactor">
/// <para>
/// Specifies how the red, green, blue, and alpha destination blending factors are computed. The following symbolic constants are accepted: GL_ZERO, GL_ONE, GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR, GL_DST_COLOR, GL_ONE_MINUS_DST_COLOR, GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, GL_DST_ALPHA, GL_ONE_MINUS_DST_ALPHA. GL_CONSTANT_COLOR, GL_ONE_MINUS_CONSTANT_COLOR, GL_CONSTANT_ALPHA, and GL_ONE_MINUS_CONSTANT_ALPHA. The initial value is GL_ZERO.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glBlendFunc")]
/// Bitwise OR of masks that indicate the buffers to be cleared. The four masks are GL_COLOR_BUFFER_BIT, GL_DEPTH_BUFFER_BIT, GL_ACCUM_BUFFER_BIT, and GL_STENCIL_BUFFER_BIT.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glClear")]
/// Specifies which texture unit to make active. The number of texture units is implementation dependent, but must be at least two. texture must be one of GL_TEXTURE, where i ranges from 0 to the value of GL_MAX_TEXTURE_COORDS - 1, which is an implementation-dependent value. The initial value is GL_TEXTURE0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glClientActiveTexture")]
/// Enable and disable writing of frame buffer color components
/// </summary>
/// <param name="red">
/// <para>
/// Specify whether red, green, blue, and alpha can or cannot be written into the frame buffer. The initial values are all GL_TRUE, indicating that the color components can be written.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glColorMask")]
/// Specifies the number of components per color. Must be 3 or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each color component in the array. Symbolic constants GL_BYTE, GL_UNSIGNED_BYTE, GL_SHORT, GL_UNSIGNED_SHORT, GL_INT, GL_UNSIGNED_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive colors. If stride is 0, the colors are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first component of the first color element in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glColorPointer")]
/// Specifies the number of components per color. Must be 3 or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each color component in the array. Symbolic constants GL_BYTE, GL_UNSIGNED_BYTE, GL_SHORT, GL_UNSIGNED_SHORT, GL_INT, GL_UNSIGNED_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive colors. If stride is 0, the colors are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first component of the first color element in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glColorPointer")]
/// Specifies the number of components per color. Must be 3 or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each color component in the array. Symbolic constants GL_BYTE, GL_UNSIGNED_BYTE, GL_SHORT, GL_UNSIGNED_SHORT, GL_INT, GL_UNSIGNED_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive colors. If stride is 0, the colors are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first component of the first color element in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glColorPointer")]
/// Specifies the number of components per color. Must be 3 or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each color component in the array. Symbolic constants GL_BYTE, GL_UNSIGNED_BYTE, GL_SHORT, GL_UNSIGNED_SHORT, GL_INT, GL_UNSIGNED_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive colors. If stride is 0, the colors are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first component of the first color element in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glColorPointer")]
/// Specifies the number of components per color. Must be 3 or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each color component in the array. Symbolic constants GL_BYTE, GL_UNSIGNED_BYTE, GL_SHORT, GL_UNSIGNED_SHORT, GL_INT, GL_UNSIGNED_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive colors. If stride is 0, the colors are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first component of the first color element in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glColorPointer")]
/// Specify a two-dimensional texture image in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalformat">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels wide and cube-mapped texture images that are at least 16 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be Must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels high and cube-mapped texture images that are at least 16 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexImage2D")]
/// Specify a two-dimensional texture image in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalformat">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels wide and cube-mapped texture images that are at least 16 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be Must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels high and cube-mapped texture images that are at least 16 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexImage2D")]
/// Specify a two-dimensional texture image in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalformat">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels wide and cube-mapped texture images that are at least 16 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be Must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels high and cube-mapped texture images that are at least 16 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexImage2D")]
/// Specify a two-dimensional texture image in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalformat">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels wide and cube-mapped texture images that are at least 16 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be Must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels high and cube-mapped texture images that are at least 16 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexImage2D")]
/// Specify a two-dimensional texture image in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalformat">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels wide and cube-mapped texture images that are at least 16 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be Must be 2 sup n + 2 ( border ) for some integer . All implementations support 2D texture images that are at least 64 texels high and cube-mapped texture images that are at least 16 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexImage2D")]
/// Specify a two-dimensional texture subimage in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexSubImage2D")]
/// Specify a two-dimensional texture subimage in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexSubImage2D")]
/// Specify a two-dimensional texture subimage in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexSubImage2D")]
/// Specify a two-dimensional texture subimage in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexSubImage2D")]
/// Specify a two-dimensional texture subimage in a compressed format
/// </summary>
/// <param name="target">
/// <para>
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the compressed image data stored at address data.
/// </para>
/// </param>
/// <param name="imageSize">
/// <para>
/// Specifies the number of unsigned bytes of image data starting at the address specified by data.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the compressed image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCompressedTexSubImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalformat">
/// <para>
/// Specifies the internal format of the texture. Must be one of the following symbolic constants: GL_ALPHA, GL_ALPHA4, GL_ALPHA8, GL_ALPHA12, GL_ALPHA16, GL_COMPRESSED_ALPHA, GL_COMPRESSED_LUMINANCE, GL_COMPRESSED_LUMINANCE_ALPHA, GL_COMPRESSED_INTENSITY, GL_COMPRESSED_RGB, GL_COMPRESSED_RGBA, GL_DEPTH_COMPONENT, GL_DEPTH_COMPONENT16, GL_DEPTH_COMPONENT24, GL_DEPTH_COMPONENT32, GL_LUMINANCE, GL_LUMINANCE4, GL_LUMINANCE8, GL_LUMINANCE12, GL_LUMINANCE16, GL_LUMINANCE_ALPHA, GL_LUMINANCE4_ALPHA4, GL_LUMINANCE6_ALPHA2, GL_LUMINANCE8_ALPHA8, GL_LUMINANCE12_ALPHA4, GL_LUMINANCE12_ALPHA12, GL_LUMINANCE16_ALPHA16, GL_INTENSITY, GL_INTENSITY4, GL_INTENSITY8, GL_INTENSITY12, GL_INTENSITY16, GL_RGB, GL_R3_G3_B2, GL_RGB4, GL_RGB5, GL_RGB8, GL_RGB10, GL_RGB12, GL_RGB16, GL_RGBA, GL_RGBA2, GL_RGBA4, GL_RGB5_A1, GL_RGBA8, GL_RGB10_A2, GL_RGBA12, GL_RGBA16, GL_SLUMINANCE, GL_SLUMINANCE8, GL_SLUMINANCE_ALPHA, GL_SLUMINANCE8_ALPHA8, GL_SRGB, GL_SRGB8, GL_SRGB_ALPHA, or GL_SRGB8_ALPHA8.
/// </para>
/// </param>
/// <param name="x">
/// <para>
/// Specify the window coordinates of the lower left corner of the rectangular region of pixels to be copied.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image. Must be 0 or 2 sup n + 2 ( border ) for some integer .
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image. Must be 0 or 2 sup m + 2 ( border ) for some integer .
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCopyTexImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="x">
/// <para>
/// Specify the window coordinates of the lower left corner of the rectangular region of pixels to be copied.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCopyTexSubImage2D")]
/// Specify whether front- or back-facing facets can be culled
/// </summary>
/// <param name="mode">
/// <para>
/// Specifies whether front- or back-facing facets are candidates for culling. Symbolic constants GL_FRONT, GL_BACK, and GL_FRONT_AND_BACK are accepted. The initial value is GL_BACK.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glCullFace")]
/// Specify the value used for depth buffer comparisons
/// </summary>
/// <param name="func">
/// <para>
/// Specifies the depth comparison function. Symbolic constants GL_NEVER, GL_LESS, GL_EQUAL, GL_LEQUAL, GL_GREATER, GL_NOTEQUAL, GL_GEQUAL, and GL_ALWAYS are accepted. The initial value is GL_LESS.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glDepthFunc")]
/// Enable or disable writing into the depth buffer
/// </summary>
/// <param name="flag">
/// <para>
/// Specifies whether the depth buffer is enabled for writing. If flag is GL_FALSE, depth buffer writing is disabled. Otherwise, it is enabled. Initially, depth buffer writing is enabled.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glDepthMask")]
/// Specifies what kind of primitives to render. Symbolic constants GL_POINTS, GL_LINE_STRIP, GL_LINE_LOOP, GL_LINES, GL_TRIANGLE_STRIP, GL_TRIANGLE_FAN, GL_TRIANGLES, GL_QUAD_STRIP, GL_QUADS, and GL_POLYGON are accepted.
/// </para>
/// </param>
/// <param name="first">
/// <para>
/// Specifies the starting index in the enabled arrays.
/// </para>
/// </param>
/// <param name="count">
/// <para>
/// Specifies the number of indices to be rendered.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glDrawArrays")]
/// Specifies what kind of primitives to render. Symbolic constants GL_POINTS, GL_LINE_STRIP, GL_LINE_LOOP, GL_LINES, GL_TRIANGLE_STRIP, GL_TRIANGLE_FAN, GL_TRIANGLES, GL_QUAD_STRIP, GL_QUADS, and GL_POLYGON are accepted.
/// </para>
/// </param>
/// <param name="count">
/// <para>
/// Specifies the number of elements to be rendered.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the type of the values in indices. Must be one of GL_UNSIGNED_BYTE, GL_UNSIGNED_SHORT, or GL_UNSIGNED_INT.
/// </para>
/// </param>
/// <param name="indices">
/// <para>
/// Specifies a pointer to the location where the indices are stored.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glDrawElements")]
/// Specifies what kind of primitives to render. Symbolic constants GL_POINTS, GL_LINE_STRIP, GL_LINE_LOOP, GL_LINES, GL_TRIANGLE_STRIP, GL_TRIANGLE_FAN, GL_TRIANGLES, GL_QUAD_STRIP, GL_QUADS, and GL_POLYGON are accepted.
/// </para>
/// </param>
/// <param name="count">
/// <para>
/// Specifies the number of elements to be rendered.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the type of the values in indices. Must be one of GL_UNSIGNED_BYTE, GL_UNSIGNED_SHORT, or GL_UNSIGNED_INT.
/// </para>
/// </param>
/// <param name="indices">
/// <para>
/// Specifies a pointer to the location where the indices are stored.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glDrawElements")]
/// Specifies what kind of primitives to render. Symbolic constants GL_POINTS, GL_LINE_STRIP, GL_LINE_LOOP, GL_LINES, GL_TRIANGLE_STRIP, GL_TRIANGLE_FAN, GL_TRIANGLES, GL_QUAD_STRIP, GL_QUADS, and GL_POLYGON are accepted.
/// </para>
/// </param>
/// <param name="count">
/// <para>
/// Specifies the number of elements to be rendered.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the type of the values in indices. Must be one of GL_UNSIGNED_BYTE, GL_UNSIGNED_SHORT, or GL_UNSIGNED_INT.
/// </para>
/// </param>
/// <param name="indices">
/// <para>
/// Specifies a pointer to the location where the indices are stored.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glDrawElements")]
/// Specifies what kind of primitives to render. Symbolic constants GL_POINTS, GL_LINE_STRIP, GL_LINE_LOOP, GL_LINES, GL_TRIANGLE_STRIP, GL_TRIANGLE_FAN, GL_TRIANGLES, GL_QUAD_STRIP, GL_QUADS, and GL_POLYGON are accepted.
/// </para>
/// </param>
/// <param name="count">
/// <para>
/// Specifies the number of elements to be rendered.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the type of the values in indices. Must be one of GL_UNSIGNED_BYTE, GL_UNSIGNED_SHORT, or GL_UNSIGNED_INT.
/// </para>
/// </param>
/// <param name="indices">
/// <para>
/// Specifies a pointer to the location where the indices are stored.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glDrawElements")]
/// Specifies what kind of primitives to render. Symbolic constants GL_POINTS, GL_LINE_STRIP, GL_LINE_LOOP, GL_LINES, GL_TRIANGLE_STRIP, GL_TRIANGLE_FAN, GL_TRIANGLES, GL_QUAD_STRIP, GL_QUADS, and GL_POLYGON are accepted.
/// </para>
/// </param>
/// <param name="count">
/// <para>
/// Specifies the number of elements to be rendered.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the type of the values in indices. Must be one of GL_UNSIGNED_BYTE, GL_UNSIGNED_SHORT, or GL_UNSIGNED_INT.
/// </para>
/// </param>
/// <param name="indices">
/// <para>
/// Specifies a pointer to the location where the indices are stored.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glDrawElements")]
/// Specifies the capability to enable. Symbolic constants GL_COLOR_ARRAY, GL_EDGE_FLAG_ARRAY, GL_FOG_COORD_ARRAY, GL_INDEX_ARRAY, GL_NORMAL_ARRAY, GL_SECONDARY_COLOR_ARRAY, GL_TEXTURE_COORD_ARRAY, and GL_VERTEX_ARRAY are accepted.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glEnableClientState")]
/// Specifies a symbolic constant indicating the behavior to be controlled. GL_FOG_HINT, GL_GENERATE_MIPMAP_HINT, GL_LINE_SMOOTH_HINT, GL_PERSPECTIVE_CORRECTION_HINT, GL_POINT_SMOOTH_HINT, GL_POLYGON_SMOOTH_HINT, GL_TEXTURE_COMPRESSION_HINT, and GL_FRAGMENT_SHADER_DERIVATIVE_HINT are accepted.
/// </para>
/// </param>
/// <param name="mode">
/// <para>
/// Specifies a symbolic constant indicating the desired behavior. GL_FASTEST, GL_NICEST, and GL_DONT_CARE are accepted.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glHint")]
/// Specifies a light. The number of lights depends on the implementation, but at least eight lights are supported. They are identified by symbolic names of the form GL_LIGHT , where i ranges from 0 to the value of GL_MAX_LIGHTS - 1.
/// </para>
/// </param>
/// <param name="pname">
/// <para>
/// Specifies a single-valued light source parameter for light. GL_SPOT_EXPONENT, GL_SPOT_CUTOFF, GL_CONSTANT_ATTENUATION, GL_LINEAR_ATTENUATION, and GL_QUADRATIC_ATTENUATION are accepted.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies the value that parameter pname of light source light will be set to.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glLightf")]
/// Specifies a light. The number of lights depends on the implementation, but at least eight lights are supported. They are identified by symbolic names of the form GL_LIGHT , where i ranges from 0 to the value of GL_MAX_LIGHTS - 1.
/// </para>
/// </param>
/// <param name="pname">
/// <para>
/// Specifies a single-valued light source parameter for light. GL_SPOT_EXPONENT, GL_SPOT_CUTOFF, GL_CONSTANT_ATTENUATION, GL_LINEAR_ATTENUATION, and GL_QUADRATIC_ATTENUATION are accepted.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies the value that parameter pname of light source light will be set to.
/// </para>
/// </param>
[System.CLSCompliant(false)]
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glLightfv")]
/// Specifies a light. The number of lights depends on the implementation, but at least eight lights are supported. They are identified by symbolic names of the form GL_LIGHT , where i ranges from 0 to the value of GL_MAX_LIGHTS - 1.
/// </para>
/// </param>
/// <param name="pname">
/// <para>
/// Specifies a single-valued light source parameter for light. GL_SPOT_EXPONENT, GL_SPOT_CUTOFF, GL_CONSTANT_ATTENUATION, GL_LINEAR_ATTENUATION, and GL_QUADRATIC_ATTENUATION are accepted.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies the value that parameter pname of light source light will be set to.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glLightfv")]
/// Specifies a single-valued lighting model parameter. GL_LIGHT_MODEL_LOCAL_VIEWER, GL_LIGHT_MODEL_COLOR_CONTROL, and GL_LIGHT_MODEL_TWO_SIDE are accepted.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies the value that param will be set to.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glLightModelf")]
/// Specifies a single-valued lighting model parameter. GL_LIGHT_MODEL_LOCAL_VIEWER, GL_LIGHT_MODEL_COLOR_CONTROL, and GL_LIGHT_MODEL_TWO_SIDE are accepted.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies the value that param will be set to.
/// </para>
/// </param>
[System.CLSCompliant(false)]
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glLightModelfv")]
/// Specifies a single-valued lighting model parameter. GL_LIGHT_MODEL_LOCAL_VIEWER, GL_LIGHT_MODEL_COLOR_CONTROL, and GL_LIGHT_MODEL_TWO_SIDE are accepted.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies the value that param will be set to.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glLightModelfv")]
/// Specify a logical pixel operation for color index rendering
/// </summary>
/// <param name="opcode">
/// <para>
/// Specifies a symbolic constant that selects a logical operation. The following symbols are accepted: GL_CLEAR, GL_SET, GL_COPY, GL_COPY_INVERTED, GL_NOOP, GL_INVERT, GL_AND, GL_NAND, GL_OR, GL_NOR, GL_XOR, GL_EQUIV, GL_AND_REVERSE, GL_AND_INVERTED, GL_OR_REVERSE, and GL_OR_INVERTED. The initial value is GL_COPY.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glLogicOp")]
/// Specifies which matrix stack is the target for subsequent matrix operations. Three values are accepted: GL_MODELVIEW, GL_PROJECTION, and GL_TEXTURE. The initial value is GL_MODELVIEW. Additionally, if the ARB_imaging extension is supported, GL_COLOR is also accepted.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glMatrixMode")]
/// Specifies the texture unit whose coordinates should be modified. The number of texture units is implementation dependent, but must be at least two. Symbolic constant must be one of GL_TEXTURE, where i ranges from 0 to GL_MAX_TEXTURE_COORDS - 1, which is an implementation-dependent value.
/// </para>
/// </param>
/// <param name="s">
/// <para>
/// Specify s, t, r, and q texture coordinates for target texture unit. Not all parameters are present in all forms of the command.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glMultiTexCoord4f")]
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_BYTE, GL_SHORT, GL_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive normals. If stride is 0, the normals are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first normal in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glNormalPointer")]
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_BYTE, GL_SHORT, GL_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive normals. If stride is 0, the normals are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first normal in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glNormalPointer")]
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_BYTE, GL_SHORT, GL_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive normals. If stride is 0, the normals are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first normal in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glNormalPointer")]
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_BYTE, GL_SHORT, GL_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive normals. If stride is 0, the normals are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first normal in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glNormalPointer")]
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_BYTE, GL_SHORT, GL_INT, GL_FLOAT, and GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive normals. If stride is 0, the normals are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first normal in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glNormalPointer")]
/// Specifies the symbolic name of the parameter to be set. Six values affect the packing of pixel data into memory: GL_PACK_SWAP_BYTES, GL_PACK_LSB_FIRST, GL_PACK_ROW_LENGTH, GL_PACK_IMAGE_HEIGHT, GL_PACK_SKIP_PIXELS, GL_PACK_SKIP_ROWS, GL_PACK_SKIP_IMAGES, and GL_PACK_ALIGNMENT. Six more affect the unpacking of pixel data from memory: GL_UNPACK_SWAP_BYTES, GL_UNPACK_LSB_FIRST, GL_UNPACK_ROW_LENGTH, GL_UNPACK_IMAGE_HEIGHT, GL_UNPACK_SKIP_PIXELS, GL_UNPACK_SKIP_ROWS, GL_UNPACK_SKIP_IMAGES, and GL_UNPACK_ALIGNMENT.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies the value that pname is set to.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glPixelStorei")]
/// Specify the window coordinates of the first pixel that is read from the frame buffer. This location is the lower left corner of a rectangular block of pixels.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specify the dimensions of the pixel rectangle. width and height of one correspond to a single pixel.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_STENCIL_INDEX, GL_DEPTH_COMPONENT, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. Must be one of GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, or GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Returns the pixel data.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glReadPixels")]
/// Specify the window coordinates of the first pixel that is read from the frame buffer. This location is the lower left corner of a rectangular block of pixels.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specify the dimensions of the pixel rectangle. width and height of one correspond to a single pixel.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_STENCIL_INDEX, GL_DEPTH_COMPONENT, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. Must be one of GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, or GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Returns the pixel data.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glReadPixels")]
/// Specify the window coordinates of the first pixel that is read from the frame buffer. This location is the lower left corner of a rectangular block of pixels.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specify the dimensions of the pixel rectangle. width and height of one correspond to a single pixel.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_STENCIL_INDEX, GL_DEPTH_COMPONENT, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. Must be one of GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, or GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Returns the pixel data.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glReadPixels")]
/// Specify the window coordinates of the first pixel that is read from the frame buffer. This location is the lower left corner of a rectangular block of pixels.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specify the dimensions of the pixel rectangle. width and height of one correspond to a single pixel.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_STENCIL_INDEX, GL_DEPTH_COMPONENT, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. Must be one of GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, or GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Returns the pixel data.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glReadPixels")]
/// Specify the window coordinates of the first pixel that is read from the frame buffer. This location is the lower left corner of a rectangular block of pixels.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specify the dimensions of the pixel rectangle. width and height of one correspond to a single pixel.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_STENCIL_INDEX, GL_DEPTH_COMPONENT, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. Must be one of GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, or GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Returns the pixel data.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glReadPixels")]
/// Specify a single floating-point sample coverage value. The value is clamped to the range [0 ,1]. The initial value is 1.0.
/// </para>
/// </param>
/// <param name="invert">
/// <para>
/// Specify a single boolean value representing if the coverage masks should be inverted. GL_TRUE and GL_FALSE are accepted. The initial value is GL_FALSE.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glSampleCoverage")]
/// Specify the lower left corner of the scissor box. Initially (0, 0).
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specify the width and height of the scissor box. When a GL context is first attached to a window, width and height are set to the dimensions of that window.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glScissor")]
/// Set front and back function and reference value for stencil testing
/// </summary>
/// <param name="func">
/// <para>
/// Specifies the test function. Eight symbolic constants are valid: GL_NEVER, GL_LESS, GL_LEQUAL, GL_GREATER, GL_GEQUAL, GL_EQUAL, GL_NOTEQUAL, and GL_ALWAYS. The initial value is GL_ALWAYS.
/// </para>
/// </param>
/// <param name="ref">
/// <para>
/// Specifies the reference value for the stencil test. ref is clamped to the range [0, 2 sup n - 1], where is the number of bitplanes in the stencil buffer. The initial value is 0.
/// </para>
/// </param>
/// <param name="mask">
/// <para>
/// Specifies a mask that is ANDed with both the reference value and the stored stencil value when the test is done. The initial value is all 1's.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glStencilFunc")]
/// Specifies the action to take when the stencil test fails. Eight symbolic constants are accepted: GL_KEEP, GL_ZERO, GL_REPLACE, GL_INCR, GL_INCR_WRAP, GL_DECR, GL_DECR_WRAP, and GL_INVERT. The initial value is GL_KEEP.
/// </para>
/// </param>
/// <param name="dpfail">
/// <para>
/// Specifies the stencil action when the stencil test passes, but the depth test fails. dpfail accepts the same symbolic constants as sfail. The initial value is GL_KEEP.
/// </para>
/// </param>
/// <param name="dppass">
/// <para>
/// Specifies the stencil action when both the stencil test and the depth test pass, or when the stencil test passes and either there is no depth buffer or depth testing is not enabled. dppass accepts the same symbolic constants as sfail. The initial value is GL_KEEP.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glStencilOp")]
/// Specifies the number of coordinates per array element. Must be 1, 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each texture coordinate. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive texture coordinate sets. If stride is 0, the array elements are understood to be tightly packed. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first texture coordinate set in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexCoordPointer")]
/// Specifies the number of coordinates per array element. Must be 1, 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each texture coordinate. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive texture coordinate sets. If stride is 0, the array elements are understood to be tightly packed. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first texture coordinate set in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexCoordPointer")]
/// Specifies the number of coordinates per array element. Must be 1, 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each texture coordinate. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive texture coordinate sets. If stride is 0, the array elements are understood to be tightly packed. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first texture coordinate set in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexCoordPointer")]
/// Specifies the number of coordinates per array element. Must be 1, 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each texture coordinate. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive texture coordinate sets. If stride is 0, the array elements are understood to be tightly packed. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first texture coordinate set in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexCoordPointer")]
/// Specifies the number of coordinates per array element. Must be 1, 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each texture coordinate. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive texture coordinate sets. If stride is 0, the array elements are understood to be tightly packed. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first texture coordinate set in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexCoordPointer")]
/// Specifies a texture environment. May be GL_TEXTURE_ENV, GL_TEXTURE_FILTER_CONTROL or GL_POINT_SPRITE.
/// </para>
/// </param>
/// <param name="pname">
/// <para>
/// Specifies the symbolic name of a single-valued texture environment parameter. May be either GL_TEXTURE_ENV_MODE, GL_TEXTURE_LOD_BIAS, GL_COMBINE_RGB, GL_COMBINE_ALPHA, GL_SRC0_RGB, GL_SRC1_RGB, GL_SRC2_RGB, GL_SRC0_ALPHA, GL_SRC1_ALPHA, GL_SRC2_ALPHA, GL_OPERAND0_RGB, GL_OPERAND1_RGB, GL_OPERAND2_RGB, GL_OPERAND0_ALPHA, GL_OPERAND1_ALPHA, GL_OPERAND2_ALPHA, GL_RGB_SCALE, GL_ALPHA_SCALE, or GL_COORD_REPLACE.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies a single symbolic constant, one of GL_ADD, GL_ADD_SIGNED, GL_INTERPOLATE, GL_MODULATE, GL_DECAL, GL_BLEND, GL_REPLACE, GL_SUBTRACT, GL_COMBINE, GL_TEXTURE, GL_CONSTANT, GL_PRIMARY_COLOR, GL_PREVIOUS, GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR, GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, a single boolean value for the point sprite texture coordinate replacement, a single floating-point value for the texture level-of-detail bias, or 1.0, 2.0, or 4.0 when specifying the GL_RGB_SCALE or GL_ALPHA_SCALE.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexEnvf")]
/// Specifies a texture environment. May be GL_TEXTURE_ENV, GL_TEXTURE_FILTER_CONTROL or GL_POINT_SPRITE.
/// </para>
/// </param>
/// <param name="pname">
/// <para>
/// Specifies the symbolic name of a single-valued texture environment parameter. May be either GL_TEXTURE_ENV_MODE, GL_TEXTURE_LOD_BIAS, GL_COMBINE_RGB, GL_COMBINE_ALPHA, GL_SRC0_RGB, GL_SRC1_RGB, GL_SRC2_RGB, GL_SRC0_ALPHA, GL_SRC1_ALPHA, GL_SRC2_ALPHA, GL_OPERAND0_RGB, GL_OPERAND1_RGB, GL_OPERAND2_RGB, GL_OPERAND0_ALPHA, GL_OPERAND1_ALPHA, GL_OPERAND2_ALPHA, GL_RGB_SCALE, GL_ALPHA_SCALE, or GL_COORD_REPLACE.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies a single symbolic constant, one of GL_ADD, GL_ADD_SIGNED, GL_INTERPOLATE, GL_MODULATE, GL_DECAL, GL_BLEND, GL_REPLACE, GL_SUBTRACT, GL_COMBINE, GL_TEXTURE, GL_CONSTANT, GL_PRIMARY_COLOR, GL_PREVIOUS, GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR, GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, a single boolean value for the point sprite texture coordinate replacement, a single floating-point value for the texture level-of-detail bias, or 1.0, 2.0, or 4.0 when specifying the GL_RGB_SCALE or GL_ALPHA_SCALE.
/// </para>
/// </param>
[System.CLSCompliant(false)]
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexEnvfv")]
/// Specifies a texture environment. May be GL_TEXTURE_ENV, GL_TEXTURE_FILTER_CONTROL or GL_POINT_SPRITE.
/// </para>
/// </param>
/// <param name="pname">
/// <para>
/// Specifies the symbolic name of a single-valued texture environment parameter. May be either GL_TEXTURE_ENV_MODE, GL_TEXTURE_LOD_BIAS, GL_COMBINE_RGB, GL_COMBINE_ALPHA, GL_SRC0_RGB, GL_SRC1_RGB, GL_SRC2_RGB, GL_SRC0_ALPHA, GL_SRC1_ALPHA, GL_SRC2_ALPHA, GL_OPERAND0_RGB, GL_OPERAND1_RGB, GL_OPERAND2_RGB, GL_OPERAND0_ALPHA, GL_OPERAND1_ALPHA, GL_OPERAND2_ALPHA, GL_RGB_SCALE, GL_ALPHA_SCALE, or GL_COORD_REPLACE.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies a single symbolic constant, one of GL_ADD, GL_ADD_SIGNED, GL_INTERPOLATE, GL_MODULATE, GL_DECAL, GL_BLEND, GL_REPLACE, GL_SUBTRACT, GL_COMBINE, GL_TEXTURE, GL_CONSTANT, GL_PRIMARY_COLOR, GL_PREVIOUS, GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR, GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, a single boolean value for the point sprite texture coordinate replacement, a single floating-point value for the texture level-of-detail bias, or 1.0, 2.0, or 4.0 when specifying the GL_RGB_SCALE or GL_ALPHA_SCALE.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexEnvfv")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalFormat">
/// <para>
/// Specifies the number of color components in the texture. Must be 1, 2, 3, or 4, or one of the following symbolic constants: GL_ALPHA, GL_ALPHA4, GL_ALPHA8, GL_ALPHA12, GL_ALPHA16, GL_COMPRESSED_ALPHA, GL_COMPRESSED_LUMINANCE, GL_COMPRESSED_LUMINANCE_ALPHA, GL_COMPRESSED_INTENSITY, GL_COMPRESSED_RGB, GL_COMPRESSED_RGBA, GL_DEPTH_COMPONENT, GL_DEPTH_COMPONENT16, GL_DEPTH_COMPONENT24, GL_DEPTH_COMPONENT32, GL_LUMINANCE, GL_LUMINANCE4, GL_LUMINANCE8, GL_LUMINANCE12, GL_LUMINANCE16, GL_LUMINANCE_ALPHA, GL_LUMINANCE4_ALPHA4, GL_LUMINANCE6_ALPHA2, GL_LUMINANCE8_ALPHA8, GL_LUMINANCE12_ALPHA4, GL_LUMINANCE12_ALPHA12, GL_LUMINANCE16_ALPHA16, GL_INTENSITY, GL_INTENSITY4, GL_INTENSITY8, GL_INTENSITY12, GL_INTENSITY16, GL_R3_G3_B2, GL_RGB, GL_RGB4, GL_RGB5, GL_RGB8, GL_RGB10, GL_RGB12, GL_RGB16, GL_RGBA, GL_RGBA2, GL_RGBA4, GL_RGB5_A1, GL_RGBA8, GL_RGB10_A2, GL_RGBA12, GL_RGBA16, GL_SLUMINANCE, GL_SLUMINANCE8, GL_SLUMINANCE_ALPHA, GL_SLUMINANCE8_ALPHA8, GL_SRGB, GL_SRGB8, GL_SRGB_ALPHA, or GL_SRGB8_ALPHA8.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup m + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalFormat">
/// <para>
/// Specifies the number of color components in the texture. Must be 1, 2, 3, or 4, or one of the following symbolic constants: GL_ALPHA, GL_ALPHA4, GL_ALPHA8, GL_ALPHA12, GL_ALPHA16, GL_COMPRESSED_ALPHA, GL_COMPRESSED_LUMINANCE, GL_COMPRESSED_LUMINANCE_ALPHA, GL_COMPRESSED_INTENSITY, GL_COMPRESSED_RGB, GL_COMPRESSED_RGBA, GL_DEPTH_COMPONENT, GL_DEPTH_COMPONENT16, GL_DEPTH_COMPONENT24, GL_DEPTH_COMPONENT32, GL_LUMINANCE, GL_LUMINANCE4, GL_LUMINANCE8, GL_LUMINANCE12, GL_LUMINANCE16, GL_LUMINANCE_ALPHA, GL_LUMINANCE4_ALPHA4, GL_LUMINANCE6_ALPHA2, GL_LUMINANCE8_ALPHA8, GL_LUMINANCE12_ALPHA4, GL_LUMINANCE12_ALPHA12, GL_LUMINANCE16_ALPHA16, GL_INTENSITY, GL_INTENSITY4, GL_INTENSITY8, GL_INTENSITY12, GL_INTENSITY16, GL_R3_G3_B2, GL_RGB, GL_RGB4, GL_RGB5, GL_RGB8, GL_RGB10, GL_RGB12, GL_RGB16, GL_RGBA, GL_RGBA2, GL_RGBA4, GL_RGB5_A1, GL_RGBA8, GL_RGB10_A2, GL_RGBA12, GL_RGBA16, GL_SLUMINANCE, GL_SLUMINANCE8, GL_SLUMINANCE_ALPHA, GL_SLUMINANCE8_ALPHA8, GL_SRGB, GL_SRGB8, GL_SRGB_ALPHA, or GL_SRGB8_ALPHA8.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup m + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalFormat">
/// <para>
/// Specifies the number of color components in the texture. Must be 1, 2, 3, or 4, or one of the following symbolic constants: GL_ALPHA, GL_ALPHA4, GL_ALPHA8, GL_ALPHA12, GL_ALPHA16, GL_COMPRESSED_ALPHA, GL_COMPRESSED_LUMINANCE, GL_COMPRESSED_LUMINANCE_ALPHA, GL_COMPRESSED_INTENSITY, GL_COMPRESSED_RGB, GL_COMPRESSED_RGBA, GL_DEPTH_COMPONENT, GL_DEPTH_COMPONENT16, GL_DEPTH_COMPONENT24, GL_DEPTH_COMPONENT32, GL_LUMINANCE, GL_LUMINANCE4, GL_LUMINANCE8, GL_LUMINANCE12, GL_LUMINANCE16, GL_LUMINANCE_ALPHA, GL_LUMINANCE4_ALPHA4, GL_LUMINANCE6_ALPHA2, GL_LUMINANCE8_ALPHA8, GL_LUMINANCE12_ALPHA4, GL_LUMINANCE12_ALPHA12, GL_LUMINANCE16_ALPHA16, GL_INTENSITY, GL_INTENSITY4, GL_INTENSITY8, GL_INTENSITY12, GL_INTENSITY16, GL_R3_G3_B2, GL_RGB, GL_RGB4, GL_RGB5, GL_RGB8, GL_RGB10, GL_RGB12, GL_RGB16, GL_RGBA, GL_RGBA2, GL_RGBA4, GL_RGB5_A1, GL_RGBA8, GL_RGB10_A2, GL_RGBA12, GL_RGBA16, GL_SLUMINANCE, GL_SLUMINANCE8, GL_SLUMINANCE_ALPHA, GL_SLUMINANCE8_ALPHA8, GL_SRGB, GL_SRGB8, GL_SRGB_ALPHA, or GL_SRGB8_ALPHA8.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup m + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalFormat">
/// <para>
/// Specifies the number of color components in the texture. Must be 1, 2, 3, or 4, or one of the following symbolic constants: GL_ALPHA, GL_ALPHA4, GL_ALPHA8, GL_ALPHA12, GL_ALPHA16, GL_COMPRESSED_ALPHA, GL_COMPRESSED_LUMINANCE, GL_COMPRESSED_LUMINANCE_ALPHA, GL_COMPRESSED_INTENSITY, GL_COMPRESSED_RGB, GL_COMPRESSED_RGBA, GL_DEPTH_COMPONENT, GL_DEPTH_COMPONENT16, GL_DEPTH_COMPONENT24, GL_DEPTH_COMPONENT32, GL_LUMINANCE, GL_LUMINANCE4, GL_LUMINANCE8, GL_LUMINANCE12, GL_LUMINANCE16, GL_LUMINANCE_ALPHA, GL_LUMINANCE4_ALPHA4, GL_LUMINANCE6_ALPHA2, GL_LUMINANCE8_ALPHA8, GL_LUMINANCE12_ALPHA4, GL_LUMINANCE12_ALPHA12, GL_LUMINANCE16_ALPHA16, GL_INTENSITY, GL_INTENSITY4, GL_INTENSITY8, GL_INTENSITY12, GL_INTENSITY16, GL_R3_G3_B2, GL_RGB, GL_RGB4, GL_RGB5, GL_RGB8, GL_RGB10, GL_RGB12, GL_RGB16, GL_RGBA, GL_RGBA2, GL_RGBA4, GL_RGB5_A1, GL_RGBA8, GL_RGB10_A2, GL_RGBA12, GL_RGBA16, GL_SLUMINANCE, GL_SLUMINANCE8, GL_SLUMINANCE_ALPHA, GL_SLUMINANCE8_ALPHA8, GL_SRGB, GL_SRGB8, GL_SRGB_ALPHA, or GL_SRGB8_ALPHA8.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup m + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_PROXY_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, GL_TEXTURE_CUBE_MAP_NEGATIVE_Z, or GL_PROXY_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="internalFormat">
/// <para>
/// Specifies the number of color components in the texture. Must be 1, 2, 3, or 4, or one of the following symbolic constants: GL_ALPHA, GL_ALPHA4, GL_ALPHA8, GL_ALPHA12, GL_ALPHA16, GL_COMPRESSED_ALPHA, GL_COMPRESSED_LUMINANCE, GL_COMPRESSED_LUMINANCE_ALPHA, GL_COMPRESSED_INTENSITY, GL_COMPRESSED_RGB, GL_COMPRESSED_RGBA, GL_DEPTH_COMPONENT, GL_DEPTH_COMPONENT16, GL_DEPTH_COMPONENT24, GL_DEPTH_COMPONENT32, GL_LUMINANCE, GL_LUMINANCE4, GL_LUMINANCE8, GL_LUMINANCE12, GL_LUMINANCE16, GL_LUMINANCE_ALPHA, GL_LUMINANCE4_ALPHA4, GL_LUMINANCE6_ALPHA2, GL_LUMINANCE8_ALPHA8, GL_LUMINANCE12_ALPHA4, GL_LUMINANCE12_ALPHA12, GL_LUMINANCE16_ALPHA16, GL_INTENSITY, GL_INTENSITY4, GL_INTENSITY8, GL_INTENSITY12, GL_INTENSITY16, GL_R3_G3_B2, GL_RGB, GL_RGB4, GL_RGB5, GL_RGB8, GL_RGB10, GL_RGB12, GL_RGB16, GL_RGBA, GL_RGBA2, GL_RGBA4, GL_RGB5_A1, GL_RGBA8, GL_RGB10_A2, GL_RGBA12, GL_RGBA16, GL_SLUMINANCE, GL_SLUMINANCE8, GL_SLUMINANCE_ALPHA, GL_SLUMINANCE8_ALPHA8, GL_SRGB, GL_SRGB8, GL_SRGB_ALPHA, or GL_SRGB8_ALPHA8.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup n + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels wide.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture image including the border if any. If the GL version does not support non-power-of-two sizes, this value must be 2 sup m + 2 ( border ) for some integer . All implementations support texture images that are at least 64 texels high.
/// </para>
/// </param>
/// <param name="border">
/// <para>
/// Specifies the width of the border. Must be either 0 or 1.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexImage2D")]
/// Specifies the target texture, which must be either GL_TEXTURE_1D, GL_TEXTURE_2D, GL_TEXTURE_3D, or GL_TEXTURE_CUBE_MAP.
/// </para>
/// </param>
/// <param name="pname">
/// <para>
/// Specifies the symbolic name of a single-valued texture parameter. pname can be one of the following: GL_TEXTURE_MIN_FILTER, GL_TEXTURE_MAG_FILTER, GL_TEXTURE_MIN_LOD, GL_TEXTURE_MAX_LOD, GL_TEXTURE_BASE_LEVEL, GL_TEXTURE_MAX_LEVEL, GL_TEXTURE_WRAP_S, GL_TEXTURE_WRAP_T, GL_TEXTURE_WRAP_R, GL_TEXTURE_PRIORITY, GL_TEXTURE_COMPARE_MODE, GL_TEXTURE_COMPARE_FUNC, GL_DEPTH_TEXTURE_MODE, or GL_GENERATE_MIPMAP.
/// </para>
/// </param>
/// <param name="param">
/// <para>
/// Specifies the value of pname.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexParameterf")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexSubImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexSubImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexSubImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexSubImage2D")]
/// Specifies the target texture. Must be GL_TEXTURE_2D, GL_TEXTURE_CUBE_MAP_POSITIVE_X, GL_TEXTURE_CUBE_MAP_NEGATIVE_X, GL_TEXTURE_CUBE_MAP_POSITIVE_Y, GL_TEXTURE_CUBE_MAP_NEGATIVE_Y, GL_TEXTURE_CUBE_MAP_POSITIVE_Z, or GL_TEXTURE_CUBE_MAP_NEGATIVE_Z.
/// </para>
/// </param>
/// <param name="level">
/// <para>
/// Specifies the level-of-detail number. Level 0 is the base image level. Level n is the nth mipmap reduction image.
/// </para>
/// </param>
/// <param name="xoffset">
/// <para>
/// Specifies a texel offset in the x direction within the texture array.
/// </para>
/// </param>
/// <param name="yoffset">
/// <para>
/// Specifies a texel offset in the y direction within the texture array.
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specifies the width of the texture subimage.
/// </para>
/// </param>
/// <param name="height">
/// <para>
/// Specifies the height of the texture subimage.
/// </para>
/// </param>
/// <param name="format">
/// <para>
/// Specifies the format of the pixel data. The following symbolic values are accepted: GL_COLOR_INDEX, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_BGR, GL_RGBA, GL_BGRA, GL_LUMINANCE, and GL_LUMINANCE_ALPHA.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of the pixel data. The following symbolic values are accepted: GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT, GL_FLOAT, GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV.
/// </para>
/// </param>
/// <param name="data">
/// <para>
/// Specifies a pointer to the image data in memory.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glTexSubImage2D")]
/// Specifies the number of coordinates per vertex. Must be 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive vertices. If stride is 0, the vertices are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first vertex in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glVertexPointer")]
/// Specifies the number of coordinates per vertex. Must be 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive vertices. If stride is 0, the vertices are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first vertex in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glVertexPointer")]
/// Specifies the number of coordinates per vertex. Must be 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive vertices. If stride is 0, the vertices are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first vertex in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glVertexPointer")]
/// Specifies the number of coordinates per vertex. Must be 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive vertices. If stride is 0, the vertices are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first vertex in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glVertexPointer")]
/// Specifies the number of coordinates per vertex. Must be 2, 3, or 4. The initial value is 4.
/// </para>
/// </param>
/// <param name="type">
/// <para>
/// Specifies the data type of each coordinate in the array. Symbolic constants GL_SHORT, GL_INT, GL_FLOAT, or GL_DOUBLE are accepted. The initial value is GL_FLOAT.
/// </para>
/// </param>
/// <param name="stride">
/// <para>
/// Specifies the byte offset between consecutive vertices. If stride is 0, the vertices are understood to be tightly packed in the array. The initial value is 0.
/// </para>
/// </param>
/// <param name="pointer">
/// <para>
/// Specifies a pointer to the first coordinate of the first vertex in the array. The initial value is 0.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glVertexPointer")]
/// Specify the lower left corner of the viewport rectangle, in pixels. The initial value is (0,0).
/// </para>
/// </param>
/// <param name="width">
/// <para>
/// Specify the width and height of the viewport. When a GL context is first attached to a window, width and height are set to the dimensions of that window.
/// </para>
/// </param>
[AutoGenerated(Category = "1.0", Version = "1.0", EntryPoint = "glViewport")]