ryujinx/SDL
1
0
Fork 0
mirror of https://github.com/Ryujinx/SDL.git synced 2024-12-23 11:45:33 +00:00
Code Issues Packages Projects Releases Wiki Activity
SDL/test/checkkeysthreads.c

299 lines
7.8 KiB
C
Raw Normal View History

Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
/*
Updated copyright for 2024
2024-01-01 21:19:49 +00:00
Copyright (C) 1997-2024 Sam Lantinga <slouken@libsdl.org>
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely.
*/
/* Simple program: Loop, watching keystrokes
Note that you need to call SDL_PollEvent() or SDL_WaitEvent() to
pump the event loop and catch keystrokes.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#ifdef __EMSCRIPTEN__
#include <emscripten/emscripten.h>
#endif
#include "SDL.h"
int done;
/* Call this instead of exit(), so we can clean up SDL: atexit() is evil. */
static void
quit(int rc)
{
SDL_Quit();
exit(rc);
}
static void
print_string(char **text, size_t *maxlen, const char *fmt, ...)
{
int len;
va_list ap;
va_start(ap, fmt);
len = SDL_vsnprintf(*text, *maxlen, fmt, ap);
if (len > 0) {
*text += len;
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
if (((size_t)len) < *maxlen) {
*maxlen -= (size_t)len;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
} else {
*maxlen = 0;
}
}
va_end(ap);
}
static void
print_modifiers(char **text, size_t *maxlen)
{
int mod;
print_string(text, maxlen, " modifiers:");
mod = SDL_GetModState();
if (!mod) {
print_string(text, maxlen, " (none)");
return;
}
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
if (mod & KMOD_LSHIFT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " LSHIFT");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_RSHIFT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " RSHIFT");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_LCTRL) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " LCTRL");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_RCTRL) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " RCTRL");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_LALT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " LALT");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_RALT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " RALT");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_LGUI) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " LGUI");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_RGUI) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " RGUI");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_NUM) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " NUM");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_CAPS) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " CAPS");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_MODE) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
print_string(text, maxlen, " MODE");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
if (mod & KMOD_SCROLL) {
Added KMOD_SCROLL to track the scroll lock state Fixes https://github.com/libsdl-org/SDL/issues/4566
2021-08-11 00:50:17 +00:00
print_string(text, maxlen, " SCROLL");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
}
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
}
static void
PrintModifierState()
{
char message[512];
char *spot;
size_t left;
spot = message;
left = sizeof(message);
print_modifiers(&spot, &left);
SDL_Log("Initial state:%s\n", message);
}
static void
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
PrintKey(SDL_Keysym *sym, SDL_bool pressed, SDL_bool repeat)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
{
char message[512];
char *spot;
size_t left;
spot = message;
left = sizeof(message);
/* Print the keycode, name and state */
if (sym->sym) {
print_string(&spot, &left,
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
"Key %s: scancode %d = %s, keycode 0x%08X = %s ",
pressed ? "pressed " : "released",
sym->scancode,
SDL_GetScancodeName(sym->scancode),
sym->sym, SDL_GetKeyName(sym->sym));
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
} else {
print_string(&spot, &left,
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
"Unknown Key (scancode %d = %s) %s ",
sym->scancode,
SDL_GetScancodeName(sym->scancode),
pressed ? "pressed " : "released");
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
}
print_modifiers(&spot, &left);
if (repeat) {
print_string(&spot, &left, " (repeat)");
}
SDL_Log("%s\n", message);
}
static void
tests: several -Wwrite-strings fixes.
2021-11-19 22:02:02 +00:00
PrintText(const char *eventtype, const char *text)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
{
tests: several -Wwrite-strings fixes.
2021-11-19 22:02:02 +00:00
const char *spot;
char expanded[1024];
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
expanded[0] = '\0';
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
for (spot = text; *spot; ++spot) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
size_t length = SDL_strlen(expanded);
Code style: changed "sizeof foo" to "sizeof(foo)" (thanks @sezero!) (cherry picked from commit c6443d86c92e962683a1efe5f123a144988875b5)
2023-03-09 23:10:00 +00:00
(void)SDL_snprintf(expanded + length, sizeof(expanded) - length, "\\x%.2x", (unsigned char)*spot);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
}
SDL_Log("%s Text (%s): \"%s%s\"\n", eventtype, expanded, *text == '"' ? "\\" : "", text);
}
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
void loop()
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
{
SDL_Event event;
/* Check for events */
/*SDL_WaitEvent(&event); emscripten does not like waiting*/
Clang-Tidy fixes (#6725) (cherry picked from commit 3c501b963dd8f0605a6ce7978882df39ba76f9cd)
2022-12-01 21:07:03 +00:00
(void)fprintf(stderr, "starting loop\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
// while (SDL_PollEvent(&event)) {
while (!done && SDL_WaitEvent(&event)) {
Clang-Tidy fixes (#6725) (cherry picked from commit 3c501b963dd8f0605a6ce7978882df39ba76f9cd)
2022-12-01 21:07:03 +00:00
SDL_Log("Got event type: %" SDL_PRIu32 "\n", event.type);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
switch (event.type) {
case SDL_KEYDOWN:
case SDL_KEYUP:
PrintKey(&event.key.keysym, (event.key.state == SDL_PRESSED) ? SDL_TRUE : SDL_FALSE, (event.key.repeat) ? SDL_TRUE : SDL_FALSE);
break;
case SDL_TEXTEDITING:
PrintText("EDIT", event.text.text);
break;
case SDL_TEXTINPUT:
PrintText("INPUT", event.text.text);
break;
case SDL_MOUSEBUTTONDOWN:
/* Left button quits the app, other buttons toggles text input */
Clang-Tidy fixes (#6725) (cherry picked from commit 3c501b963dd8f0605a6ce7978882df39ba76f9cd)
2022-12-01 21:07:03 +00:00
(void)fprintf(stderr, "mouse button down button: %d (LEFT=%d)\n", event.button.button, SDL_BUTTON_LEFT);
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
if (event.button.button == SDL_BUTTON_LEFT) {
done = 1;
} else {
if (SDL_IsTextInputActive()) {
SDL_Log("Stopping text input\n");
SDL_StopTextInput();
} else {
SDL_Log("Starting text input\n");
SDL_StartTextInput();
}
}
break;
case SDL_QUIT:
done = 1;
break;
default:
break;
}
Clang-Tidy fixes (#6725) (cherry picked from commit 3c501b963dd8f0605a6ce7978882df39ba76f9cd)
2022-12-01 21:07:03 +00:00
(void)fprintf(stderr, "waiting new event\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
}
Clang-Tidy fixes (#6725) (cherry picked from commit 3c501b963dd8f0605a6ce7978882df39ba76f9cd)
2022-12-01 21:07:03 +00:00
(void)fprintf(stderr, "exiting event loop\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
#ifdef __EMSCRIPTEN__
if (done) {
emscripten_cancel_main_loop();
}
#endif
}
/* Very simple thread - counts 0 to 9 delaying 50ms between increments */
test/checkkeysthreads: build fixes, and add to os2 makefile.
2021-06-04 21:05:56 +00:00
static int SDLCALL ping_thread(void *ptr)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
{
int cnt;
SDL_Event sdlevent;
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
SDL_memset(&sdlevent, 0, sizeof(SDL_Event));
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
for (cnt = 0; cnt < 10; ++cnt) {
Clang-Tidy fixes (#6725) (cherry picked from commit 3c501b963dd8f0605a6ce7978882df39ba76f9cd)
2022-12-01 21:07:03 +00:00
(void)fprintf(stderr, "sending event (%d/%d) from thread.\n", cnt + 1, 10);
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
sdlevent.type = SDL_KEYDOWN;
sdlevent.key.keysym.sym = SDLK_1;
SDL_PushEvent(&sdlevent);
SDL_Delay(1000 + rand() % 1000);
}
return cnt;
}
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
int main(int argc, char *argv[])
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
{
SDL_Window *window;
checkkeysthreads: Create a renderer for window display on Wayland Applies checkkeys patch from 105f1206 to checkkeysthreads.
2021-10-27 01:27:34 +00:00
SDL_Renderer *renderer;
test/checkkeysthreads: build fixes, and add to os2 makefile.
2021-06-04 21:05:56 +00:00
SDL_Thread *thread;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
/* Enable standard application logging */
SDL_LogSetPriority(SDL_LOG_CATEGORY_APPLICATION, SDL_LOG_PRIORITY_INFO);
/* Initialize SDL */
if (SDL_Init(SDL_INIT_VIDEO) < 0) {
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't initialize SDL: %s\n", SDL_GetError());
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
return 1;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
}
/* Set 640x480 video mode */
window = SDL_CreateWindow("CheckKeys Test",
SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED,
640, 480, 0);
[SDL2] pointer boolean (#8523)
2023-11-10 14:30:56 +00:00
if (!window) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't create 640x480 window: %s\n",
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594 (cherry picked from commit 5750bcb174300011b91d1de20edb288fcca70f8c)
2022-11-30 20:51:59 +00:00
SDL_GetError());
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
quit(2);
}
checkkeysthreads: Create a renderer for window display on Wayland Applies checkkeys patch from 105f1206 to checkkeysthreads.
2021-10-27 01:27:34 +00:00
/* On wayland, no window will actually show until something has
actually been displayed.
*/
renderer = SDL_CreateRenderer(window, -1, 0);
SDL_RenderPresent(renderer);
cmake: fix uses of undefined macro identifiers (-Wundef)
2023-11-17 03:06:26 +00:00
#ifdef __IPHONEOS__
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
/* Creating the context creates the view, which we need to show keyboard */
SDL_GL_CreateContext(window);
#endif
SDL_StartTextInput();
/* Print initial modifier state */
SDL_PumpEvents();
PrintModifierState();
/* Watch keystrokes */
done = 0;
Clang-Tidy fixes (#6725) (cherry picked from commit 3c501b963dd8f0605a6ce7978882df39ba76f9cd)
2022-12-01 21:07:03 +00:00
thread = SDL_CreateThread(ping_thread, "PingThread", NULL);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
#ifdef __EMSCRIPTEN__
emscripten_set_main_loop(loop, 0, 1);
#else
while (!done) {
loop();
}
#endif
SDL_WaitThread(thread, NULL);
SDL_Quit();
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line (cherry picked from commit 6a2200823c66e53bd3cda4a25f0206b834392652 to reduce conflicts merging between SDL2 and SDL3)
2022-11-27 16:38:43 +00:00
return 0;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 20:58:20 +00:00
}
/* vi: set ts=4 sw=4 expandtab: */
Reference in a new issue Copy permalink