Make build system less annoying (#8) r=bryner

- Place objects in the appropriate directories, instead of filling up
   the root directory.
 - Remove namespace macros, which made maintenance troublesome and which
   created a dependency on config.h in public headers
 - Skip useless Fortran checks at configure time


git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@8 4c0a9323-5329-0410-9bdc-e9ce6186880e

AUTHORS

@@ -1,2 +1 @@
 opensource@google.com
-

COPYING

@@ -187,7 +187,7 @@
       same "printed page" as the copyright notice for easier
       identification within third-party archives.
 
-   Copyright [yyyy] [name of copyright owner]
+   Copyright (C) 2006 Google Inc.
 
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.

INSTALL

@@ -1,10 +1,12 @@
-Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Installation Instructions
-Foundation, Inc.
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
 
 This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
-
 Basic Installation
 ==================
 
@@ -68,9 +70,9 @@ The simplest way to compile this package is:
 Compilers and Options
 =====================
 
-   Some systems require unusual options for compilation or linking that
+Some systems require unusual options for compilation or linking that the
-the `configure' script does not know about.  Run `./configure --help'
+`configure' script does not know about.  Run `./configure --help' for
-for details on some of the pertinent environment variables.
+details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
@@ -100,19 +102,19 @@ for another architecture.
 Installation Names
 ==================
 
-   By default, `make install' will install the package's files in
+By default, `make install' installs the package's commands under
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
-installation prefix other than `/usr/local' by giving `configure' the
+can specify an installation prefix other than `/usr/local' by giving
-option `--prefix=PATH'.
+`configure' the option `--prefix=PREFIX'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PATH as the prefix for installing programs and libraries.
+PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -138,11 +140,11 @@ you can use the `configure' options `--x-includes=DIR' and
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
+There may be some features `configure' cannot figure out automatically,
-automatically, but needs to determine by the type of machine the package
+but needs to determine by the type of machine the package will run on.
-will run on.  Usually, assuming the package is built to be run on the
+Usually, assuming the package is built to be run on the _same_
-_same_ architectures, `configure' can figure that out, but if it prints
+architectures, `configure' can figure that out, but if it prints a
-a message saying it cannot guess the machine type, give it the
+message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -157,7 +159,7 @@ where SYSTEM can have one of these forms:
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
@@ -168,9 +170,9 @@ eventually be run) with `--host=TYPE'.
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
+If you want to set default values for `configure' scripts to share, you
-you can create a site shell script called `config.site' that gives
+can create a site shell script called `config.site' that gives default
-default values for variables like `CC', `cache_file', and `prefix'.
+values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -187,14 +189,18 @@ them in the `configure' command line, using `VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
 
 `configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
+`configure' recognizes the following options to control how it operates.
-operates.
 
 `--help'
 `-h'

Makefile.am

@@ -1,64 +1,64 @@
 ## Process this file with automake to produce Makefile.in
 
-# Make sure that when we re-make ./configure, we get the macros we need
+# Copyright (C) 2006 Google Inc.
-ACLOCAL_AMFLAGS = -I `pwd`/../autoconf
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
-# This is so we can #include <google/foo>
-AM_CPPFLAGS = -I$(top_srcdir)/src
-
-googleincludedir = $(includedir)/google
-## The .h files you want to install (that is, .h files that people
-## who install this package can include in their own applications.)
-googleinclude_HEADERS =
 
+## Documentation
 docdir = $(prefix)/share/doc/$(PACKAGE)-$(VERSION)
-## This is for HTML and other documentation you want to install.
-## Add your documentation files (in doc/) in addition to these
-## top-level boilerplate files.  Also add a TODO file if you have one.
-dist_doc_DATA = AUTHORS COPYING ChangeLog INSTALL NEWS README
 
-## The libraries (.so's) you want to install
+dist_doc_DATA = \
-lib_LTLIBRARIES = libairbag.la
+	AUTHORS \
+	COPYING \
+	ChangeLog \
+	INSTALL \
+	NEWS \
+	README
 
-## unittests you want to run when people type 'make check'.
-## TESTS is for binary unittests, check_SCRIPTS for script-based unittests.
-## TESTS_ENVIRONMENT sets environment variables for when you run unittest,
-## but it only seems to take effect for *binary* unittests (argh!)
-TESTS = source_line_resolver_unittest
-TESTS_ENVIRONMENT =
-check_SCRIPTS =
-# Every time you add a unittest to check_SCRIPTS, add it here too
-noinst_SCRIPTS =
 
-## vvvv RULES TO MAKE THE LIBRARIES, BINARIES, AND UNITTESTS
+## Libraries
+lib_LTLIBRARIES = src/libairbag.la
 
-libairbag_la_SOURCES = 				\
+src_libairbag_la_SOURCES = \
 	src/processor/source_line_resolver.cc \
 	src/processor/source_line_resolver.h
 
-source_line_resolver_unittest_SOURCES =		\
-	src/processor/source_line_resolver_unittest.cc \
-	src/processor/source_line_resolver.h
-source_line_resolver_unittest_LDADD = source_line_resolver.lo
 
-## ^^^^ END OF RULES TO MAKE THE LIBRARIES, BINARIES, AND UNITTESTS
+## Tests
+TESTS = src/processor/source_line_resolver_unittest
+TESTS_ENVIRONMENT =
+check_SCRIPTS =
+
+src_processor_source_line_resolver_unittest_SOURCES = \
+	src/processor/source_line_resolver_unittest.cc
+src_processor_source_line_resolver_unittest_LDADD = \
+	src/processor/source_line_resolver.lo
 
 
-## This should always include $(TESTS), but may also include other
+## Non-installables
-## binaries that you compile but don't want automatically installed.
 noinst_PROGRAMS = $(TESTS)
+noinst_SCRIPTS = $(check_SCRIPTS)
 
-rpm: dist-gzip packages/rpm.sh packages/rpm/rpm.spec
-	@cd packages && ./rpm.sh ${PACKAGE} ${VERSION}
 
-deb: dist-gzip packages/deb.sh packages/deb/*
+## Additional files to be included in a source distribution
-	@cd packages && ./deb.sh ${PACKAGE} ${VERSION}
+EXTRA_DIST = \
+	$(SCRIPTS) \
+	src/processor/testdata/module1.out \
+	src/processor/testdata/module2.out \
+	src/processor/testdata/module3_bad.out
 
+
+## Additional rules
 libtool: $(LIBTOOL_DEPS)
 	$(SHELL) ./config.status --recheck
-EXTRA_DIST = packages/rpm.sh packages/rpm/rpm.spec packages/deb.sh packages/deb \
-	$(SCRIPTS) libtool
-
-## If you create hash_map.h, hash_set.h, and/or hash_fun.h via the
-## ACC_CXX_MAKE_*_H configure.ac macros, add those files here.
-DISTCLEANFILES =

Makefile.in

@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -14,12 +14,23 @@
 
 @SET_MAKE@
 
+# Copyright (C) 2006 Google Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
 
 
 
-SOURCES = $(libairbag_la_SOURCES) $(source_line_resolver_unittest_SOURCES)
-
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
@@ -44,11 +55,11 @@ build_triplet = @build@
 host_triplet = @host@
 noinst_PROGRAMS = $(am__EXEEXT_1)
 DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
-	$(googleinclude_HEADERS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	$(top_srcdir)/configure $(top_srcdir)/src/config.h.in AUTHORS \
-	$(top_srcdir)/src/config.h.in AUTHORS COPYING ChangeLog \
+	COPYING ChangeLog INSTALL NEWS autotools/config.guess \
-	INSTALL NEWS compile config.guess config.sub depcomp \
+	autotools/config.sub autotools/depcomp autotools/install-sh \
-	install-sh ltmain.sh missing mkinstalldirs
+	autotools/ltmain.sh autotools/missing
 subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
@@ -56,7 +67,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/config.h
 CONFIG_CLEAN_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -65,23 +76,24 @@ am__vpath_adj = case $$p in \
     *) f=$$p;; \
   esac;
 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" \
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)"
-	"$(DESTDIR)$(googleincludedir)"
 libLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(lib_LTLIBRARIES)
-libairbag_la_LIBADD =
+src_libairbag_la_LIBADD =
-am_libairbag_la_OBJECTS = source_line_resolver.lo
+am__dirstamp = $(am__leading_dot)dirstamp
-libairbag_la_OBJECTS = $(am_libairbag_la_OBJECTS)
+am_src_libairbag_la_OBJECTS = src/processor/source_line_resolver.lo
-am__EXEEXT_1 = source_line_resolver_unittest$(EXEEXT)
+src_libairbag_la_OBJECTS = $(am_src_libairbag_la_OBJECTS)
+am__EXEEXT_1 = src/processor/source_line_resolver_unittest$(EXEEXT)
 PROGRAMS = $(noinst_PROGRAMS)
-am_source_line_resolver_unittest_OBJECTS =  \
+am_src_processor_source_line_resolver_unittest_OBJECTS =  \
-	source_line_resolver_unittest.$(OBJEXT)
+	src/processor/source_line_resolver_unittest.$(OBJEXT)
-source_line_resolver_unittest_OBJECTS =  \
+src_processor_source_line_resolver_unittest_OBJECTS =  \
-	$(am_source_line_resolver_unittest_OBJECTS)
+	$(am_src_processor_source_line_resolver_unittest_OBJECTS)
-source_line_resolver_unittest_DEPENDENCIES = source_line_resolver.lo
+src_processor_source_line_resolver_unittest_DEPENDENCIES =  \
+	src/processor/source_line_resolver.lo
 SCRIPTS = $(noinst_SCRIPTS)
 DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src
-depcomp = $(SHELL) $(top_srcdir)/depcomp
+depcomp = $(SHELL) $(top_srcdir)/autotools/depcomp
 am__depfiles_maybe = depfiles
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
@@ -99,14 +111,12 @@ LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
 CCLD = $(CC)
 LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libairbag_la_SOURCES) \
+SOURCES = $(src_libairbag_la_SOURCES) \
-	$(source_line_resolver_unittest_SOURCES)
+	$(src_processor_source_line_resolver_unittest_SOURCES)
-DIST_SOURCES = $(libairbag_la_SOURCES) \
+DIST_SOURCES = $(src_libairbag_la_SOURCES) \
-	$(source_line_resolver_unittest_SOURCES)
+	$(src_processor_source_line_resolver_unittest_SOURCES)
 dist_docDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_doc_DATA)
-googleincludeHEADERS_INSTALL = $(INSTALL_HEADER)
-HEADERS = $(googleinclude_HEADERS)
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -217,35 +227,36 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
-
-# Make sure that when we re-make ./configure, we get the macros we need
-ACLOCAL_AMFLAGS = -I `pwd`/../autoconf
-
-# This is so we can #include <google/foo>
-AM_CPPFLAGS = -I$(top_srcdir)/src
-googleincludedir = $(includedir)/google
-googleinclude_HEADERS = 
 docdir = $(prefix)/share/doc/$(PACKAGE)-$(VERSION)
-dist_doc_DATA = AUTHORS COPYING ChangeLog INSTALL NEWS README
+dist_doc_DATA = \
-lib_LTLIBRARIES = libairbag.la
+	AUTHORS \
-TESTS = source_line_resolver_unittest
+	COPYING \
-TESTS_ENVIRONMENT = 
+	ChangeLog \
-check_SCRIPTS = 
+	INSTALL \
-# Every time you add a unittest to check_SCRIPTS, add it here too
+	NEWS \
-noinst_SCRIPTS = 
+	README
-libairbag_la_SOURCES = \
+
+lib_LTLIBRARIES = src/libairbag.la
+src_libairbag_la_SOURCES = \
 	src/processor/source_line_resolver.cc \
 	src/processor/source_line_resolver.h
 
-source_line_resolver_unittest_SOURCES = \
+TESTS = src/processor/source_line_resolver_unittest
-	src/processor/source_line_resolver_unittest.cc \
+TESTS_ENVIRONMENT = 
-	src/processor/source_line_resolver.h
+check_SCRIPTS = 
+src_processor_source_line_resolver_unittest_SOURCES = \
+	src/processor/source_line_resolver_unittest.cc
 
-source_line_resolver_unittest_LDADD = source_line_resolver.lo
+src_processor_source_line_resolver_unittest_LDADD = \
-EXTRA_DIST = packages/rpm.sh packages/rpm/rpm.spec packages/deb.sh packages/deb \
+	src/processor/source_line_resolver.lo
-	$(SCRIPTS) libtool
+
+noinst_SCRIPTS = $(check_SCRIPTS)
+EXTRA_DIST = \
+	$(SCRIPTS) \
+	src/processor/testdata/module1.out \
+	src/processor/testdata/module2.out \
+	src/processor/testdata/module3_bad.out
 
-DISTCLEANFILES = 
 all: all-am
 
 .SUFFIXES:
@@ -327,8 +338,19 @@ clean-libLTLIBRARIES:
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-libairbag.la: $(libairbag_la_OBJECTS) $(libairbag_la_DEPENDENCIES) 
+src/processor/$(am__dirstamp):
-	$(CXXLINK) -rpath $(libdir) $(libairbag_la_LDFLAGS) $(libairbag_la_OBJECTS) $(libairbag_la_LIBADD) $(LIBS)
+	@$(mkdir_p) src/processor
+	@: > src/processor/$(am__dirstamp)
+src/processor/$(DEPDIR)/$(am__dirstamp):
+	@$(mkdir_p) src/processor/$(DEPDIR)
+	@: > src/processor/$(DEPDIR)/$(am__dirstamp)
+src/processor/source_line_resolver.lo: src/processor/$(am__dirstamp) \
+	src/processor/$(DEPDIR)/$(am__dirstamp)
+src/$(am__dirstamp):
+	@$(mkdir_p) src
+	@: > src/$(am__dirstamp)
+src/libairbag.la: $(src_libairbag_la_OBJECTS) $(src_libairbag_la_DEPENDENCIES) src/$(am__dirstamp)
+	$(CXXLINK) -rpath $(libdir) $(src_libairbag_la_LDFLAGS) $(src_libairbag_la_OBJECTS) $(src_libairbag_la_LIBADD) $(LIBS)
 
 clean-noinstPROGRAMS:
 	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
@@ -336,66 +358,56 @@ clean-noinstPROGRAMS:
 	  echo " rm -f $$p $$f"; \
 	  rm -f $$p $$f ; \
 	done
-source_line_resolver_unittest$(EXEEXT): $(source_line_resolver_unittest_OBJECTS) $(source_line_resolver_unittest_DEPENDENCIES) 
+src/processor/source_line_resolver_unittest.$(OBJEXT):  \
-	@rm -f source_line_resolver_unittest$(EXEEXT)
+	src/processor/$(am__dirstamp) \
-	$(CXXLINK) $(source_line_resolver_unittest_LDFLAGS) $(source_line_resolver_unittest_OBJECTS) $(source_line_resolver_unittest_LDADD) $(LIBS)
+	src/processor/$(DEPDIR)/$(am__dirstamp)
+src/processor/source_line_resolver_unittest$(EXEEXT): $(src_processor_source_line_resolver_unittest_OBJECTS) $(src_processor_source_line_resolver_unittest_DEPENDENCIES) src/processor/$(am__dirstamp)
+	@rm -f src/processor/source_line_resolver_unittest$(EXEEXT)
+	$(CXXLINK) $(src_processor_source_line_resolver_unittest_LDFLAGS) $(src_processor_source_line_resolver_unittest_OBJECTS) $(src_processor_source_line_resolver_unittest_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
+	-rm -f src/processor/source_line_resolver.$(OBJEXT)
+	-rm -f src/processor/source_line_resolver.lo
+	-rm -f src/processor/source_line_resolver_unittest.$(OBJEXT)
 
 distclean-compile:
 	-rm -f *.tab.c
 
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/source_line_resolver.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/processor/$(DEPDIR)/source_line_resolver.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/source_line_resolver_unittest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/processor/$(DEPDIR)/source_line_resolver_unittest.Po@am__quote@
 
 .cc.o:
-@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cc.obj:
-@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cc.lo:
-@am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Plo"; else rm -f "$$depbase.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
 
-source_line_resolver.lo: src/processor/source_line_resolver.cc
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT source_line_resolver.lo -MD -MP -MF "$(DEPDIR)/source_line_resolver.Tpo" -c -o source_line_resolver.lo `test -f 'src/processor/source_line_resolver.cc' || echo '$(srcdir)/'`src/processor/source_line_resolver.cc; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/source_line_resolver.Tpo" "$(DEPDIR)/source_line_resolver.Plo"; else rm -f "$(DEPDIR)/source_line_resolver.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/processor/source_line_resolver.cc' object='source_line_resolver.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o source_line_resolver.lo `test -f 'src/processor/source_line_resolver.cc' || echo '$(srcdir)/'`src/processor/source_line_resolver.cc
-
-source_line_resolver_unittest.o: src/processor/source_line_resolver_unittest.cc
-@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT source_line_resolver_unittest.o -MD -MP -MF "$(DEPDIR)/source_line_resolver_unittest.Tpo" -c -o source_line_resolver_unittest.o `test -f 'src/processor/source_line_resolver_unittest.cc' || echo '$(srcdir)/'`src/processor/source_line_resolver_unittest.cc; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/source_line_resolver_unittest.Tpo" "$(DEPDIR)/source_line_resolver_unittest.Po"; else rm -f "$(DEPDIR)/source_line_resolver_unittest.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/processor/source_line_resolver_unittest.cc' object='source_line_resolver_unittest.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o source_line_resolver_unittest.o `test -f 'src/processor/source_line_resolver_unittest.cc' || echo '$(srcdir)/'`src/processor/source_line_resolver_unittest.cc
-
-source_line_resolver_unittest.obj: src/processor/source_line_resolver_unittest.cc
-@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT source_line_resolver_unittest.obj -MD -MP -MF "$(DEPDIR)/source_line_resolver_unittest.Tpo" -c -o source_line_resolver_unittest.obj `if test -f 'src/processor/source_line_resolver_unittest.cc'; then $(CYGPATH_W) 'src/processor/source_line_resolver_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/processor/source_line_resolver_unittest.cc'; fi`; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/source_line_resolver_unittest.Tpo" "$(DEPDIR)/source_line_resolver_unittest.Po"; else rm -f "$(DEPDIR)/source_line_resolver_unittest.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/processor/source_line_resolver_unittest.cc' object='source_line_resolver_unittest.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o source_line_resolver_unittest.obj `if test -f 'src/processor/source_line_resolver_unittest.cc'; then $(CYGPATH_W) 'src/processor/source_line_resolver_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/processor/source_line_resolver_unittest.cc'; fi`
-
 mostlyclean-libtool:
 	-rm -f *.lo
 
 clean-libtool:
 	-rm -rf .libs _libs
+	-rm -rf src/.libs src/_libs
+	-rm -rf src/processor/.libs src/processor/_libs
 
 distclean-libtool:
 	-rm -f libtool
@@ -417,23 +429,6 @@ uninstall-dist_docDATA:
 	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
 	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
 	done
-install-googleincludeHEADERS: $(googleinclude_HEADERS)
-	@$(NORMAL_INSTALL)
-	test -z "$(googleincludedir)" || $(mkdir_p) "$(DESTDIR)$(googleincludedir)"
-	@list='$(googleinclude_HEADERS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(googleincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(googleincludedir)/$$f'"; \
-	  $(googleincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(googleincludedir)/$$f"; \
-	done
-
-uninstall-googleincludeHEADERS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(googleinclude_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(googleincludedir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(googleincludedir)/$$f"; \
-	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -559,7 +554,7 @@ check-TESTS: $(TESTS)
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
 	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/packages $(distdir)/packages/rpm $(distdir)/src
+	$(mkdir_p) $(distdir)/autotools $(distdir)/src $(distdir)/src/processor/testdata
 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
 	list='$(DISTFILES)'; for file in $$list; do \
@@ -687,10 +682,9 @@ check-am: all-am
 	$(MAKE) $(AM_MAKEFLAGS) $(check_SCRIPTS)
 	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
 check: check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA)
-		$(HEADERS)
 installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(googleincludedir)"; do \
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)"; do \
 	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
 	done
 install: install-am
@@ -713,7 +707,9 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+	-rm -f src/$(am__dirstamp)
+	-rm -f src/processor/$(DEPDIR)/$(am__dirstamp)
+	-rm -f src/processor/$(am__dirstamp)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -725,7 +721,7 @@ clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
 
 distclean: distclean-am
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
+	-rm -rf src/processor/$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-hdr distclean-libtool distclean-tags
@@ -740,7 +736,7 @@ info: info-am
 
 info-am:
 
-install-data-am: install-dist_docDATA install-googleincludeHEADERS
+install-data-am: install-dist_docDATA
 
 install-exec-am: install-libLTLIBRARIES
 
@@ -753,7 +749,7 @@ installcheck-am:
 maintainer-clean: maintainer-clean-am
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
+	-rm -rf src/processor/$(DEPDIR)
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
@@ -770,8 +766,8 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-dist_docDATA uninstall-googleincludeHEADERS \
+uninstall-am: uninstall-dist_docDATA uninstall-info-am \
-	uninstall-info-am uninstall-libLTLIBRARIES
+	uninstall-libLTLIBRARIES
 
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-TESTS check-am \
 	clean clean-generic clean-libLTLIBRARIES clean-libtool \
@@ -781,23 +777,16 @@ uninstall-am: uninstall-dist_docDATA uninstall-googleincludeHEADERS \
 	distclean-libtool distclean-tags distcleancheck distdir \
 	distuninstallcheck dvi dvi-am html html-am info info-am \
 	install install-am install-data install-data-am \
-	install-dist_docDATA install-exec install-exec-am \
+	install-dist_docDATA install-exec install-exec-am install-info \
-	install-googleincludeHEADERS install-info install-info-am \
+	install-info-am install-libLTLIBRARIES install-man \
-	install-libLTLIBRARIES install-man install-strip installcheck \
+	install-strip installcheck installcheck-am installdirs \
-	installcheck-am installdirs maintainer-clean \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	tags uninstall uninstall-am uninstall-dist_docDATA \
+	uninstall-dist_docDATA uninstall-info-am \
-	uninstall-googleincludeHEADERS uninstall-info-am \
 	uninstall-libLTLIBRARIES
 
 
-rpm: dist-gzip packages/rpm.sh packages/rpm/rpm.spec
-	@cd packages && ./rpm.sh ${PACKAGE} ${VERSION}
-
-deb: dist-gzip packages/deb.sh packages/deb/*
-	@cd packages && ./deb.sh ${PACKAGE} ${VERSION}
-
 libtool: $(LIBTOOL_DEPS)
 	$(SHELL) ./config.status --recheck
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

autotools/config.guess

@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2006-01-30'
+timestamp='2005-12-13'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -106,7 +106,7 @@ set_cc_for_build='
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
  { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
@@ -206,9 +206,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
     macppc:MirBSD:*:*)
 	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
@@ -767,12 +764,7 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
@@ -859,11 +851,7 @@ EOF
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^CPU/{s: ::g;p;}'`"
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     mips64:Linux:*:*)
@@ -882,11 +870,7 @@ EOF
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^CPU/{s: ::g;p;}'`"
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     or32:Linux:*:*)
@@ -993,11 +977,7 @@ EOF
 	LIBC=dietlibc
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^LIBC/{s: ::g;p;}'`"
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
 	test x"${LIBC}" != x && {
 		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 		exit

autotools/config.sub

@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2006-01-02'
+timestamp='2005-12-11'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -248,7 +248,7 @@ case $basic_machine in
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -818,12 +818,6 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -1199,8 +1193,7 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
-	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \

autotools/depcomp

@@ -1,7 +1,9 @@
 #! /bin/sh
-
 # depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -15,8 +17,8 @@
 
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02111-1307, USA.
+# 02110-1301, USA.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -25,22 +27,45 @@
 
 # Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
 
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
 fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
-   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
-   dir=`echo "$object" | sed 's,/.*$,/,'`
-   if test "$dir" = "$object"; then
-      dir=
-   fi
-   # FIXME: should be _deps on DOS.
-   depfile="$dir.deps/$base"
-fi
 
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
 tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
@@ -172,19 +197,25 @@ sgi)
 
 aix)
   # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  This file always lives in the current directory.
+  # in a .u file.  In older versions, this file always lives in the
-  # Also, the AIX compiler puts `$object:' at the start of each line;
+  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # $object doesn't have directory information.
+  # start of each line; $object doesn't have directory information.
-  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
   tmpdepfile="$stripped.u"
-  outname="$stripped.o"
   if test "$libtool" = yes; then
     "$@" -Wc,-M
   else
     "$@" -M
   fi
-
   stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
   if test $stat -eq 0; then :
   else
     rm -f "$tmpdepfile"
@@ -192,6 +223,7 @@ aix)
   fi
 
   if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
@@ -206,6 +238,44 @@ aix)
   rm -f "$tmpdepfile"
   ;;
 
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
 tru64)
    # The Tru64 compiler uses -MD to generate dependencies as a side
    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -217,30 +287,46 @@ tru64)
    base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
    if test "$libtool" = yes; then
-      tmpdepfile1="$dir.libs/$base.lo.d"
+      # With Tru64 cc, shared objects can also be used to make a
-      tmpdepfile2="$dir.libs/$base.d"
+      # static library.  This mecanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
       "$@" -Wc,-MD
    else
-      tmpdepfile1="$dir$base.o.d"
+      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2="$dir$base.d"
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
       "$@" -MD
    fi
 
    stat=$?
    if test $stat -eq 0; then :
    else
-      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
       exit $stat
    fi
 
-   if test -f "$tmpdepfile1"; then
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      tmpdepfile="$tmpdepfile1"
+   do
-   else
+     test -f "$tmpdepfile" && break
-      tmpdepfile="$tmpdepfile2"
+   done
-   fi
    if test -f "$tmpdepfile"; then
       sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a space and a tab in the [].
+      # That's a tab and a space in the [].
       sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
    else
       echo "#dummy" > "$depfile"
@@ -254,7 +340,7 @@ tru64)
 
 dashmstdout)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o.
+  # always write the preprocessed file to stdout, regardless of -o.
   "$@" || exit $?
 
   # Remove the call to Libtool.
@@ -265,9 +351,7 @@ dashmstdout)
     shift
   fi
 
-  # Remove `-o $object'.  We will use -o /dev/null later,
+  # Remove `-o $object'.
-  # however we can't do the remplacement now because
-  # `-o $object' might simply not be used
   IFS=" "
   for arg
   do
@@ -287,7 +371,11 @@ dashmstdout)
   done
 
   test -z "$dashmflag" && dashmflag=-M
-  "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
   tr ' ' '
@@ -306,6 +394,13 @@ dashXmstdout)
 
 makedepend)
   "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
   # X makedepend
   shift
   cleared=no
@@ -318,7 +413,9 @@ makedepend)
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
-    -*)
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
@@ -339,7 +436,7 @@ makedepend)
 
 cpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout.
+  # always write the preprocessed file to stdout.
   "$@" || exit $?
 
   # Remove the call to Libtool.
@@ -370,7 +467,8 @@ cpp)
   done
 
   "$@" -E |
-    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
     sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
@@ -381,7 +479,7 @@ cpp)
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
+  # always write the preprocessed file to stdout, regardless of -o,
   # because we must use -o when running libtool.
   "$@" || exit $?
   IFS=" "
@@ -421,3 +519,12 @@ none)
 esac
 
 exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

autotools/install-sh

@@ -0,0 +1,323 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

autotools/missing

@@ -1,6 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -15,8 +19,8 @@
 
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02111-1307, USA.
+# 02110-1301, USA.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -38,18 +42,24 @@ else
   configure_ac=configure.in
 fi
 
+msg="missing on your system"
+
 case "$1" in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
   shift
   "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
   ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
 
   -h|--h|--he|--hel|--help)
     echo "\
@@ -74,11 +84,15 @@ Supported PROGRAM values:
   lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file
   tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.4 - GNU automake"
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
     ;;
 
   -*)
@@ -87,14 +101,44 @@ Supported PROGRAM values:
     exit 1
     ;;
 
-  aclocal*)
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
     if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
        # We have it, but it failed.
        exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
     fi
+    ;;
+esac
 
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
          to install the \`Automake' and \`Perl' packages.  Grab them from
          any GNU archive site."
@@ -102,13 +146,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
          archive site."
@@ -116,13 +155,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
          to install the \`Autoconf' and \`GNU m4' packages.  Grab them
          from any GNU archive site."
@@ -140,13 +174,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
          You might want to install the \`Automake' and \`Perl' packages.
          Grab them from any GNU archive site."
@@ -156,16 +185,11 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
+WARNING: \`$1' is needed, but is $msg.
-         system.  You might have modified some files without having the
+         You might have modified some files without having the
          proper tools for further handling them.
-         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+         You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
     file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
@@ -185,7 +209,7 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
 
   bison|yacc)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
@@ -215,7 +239,7 @@ WARNING: \`$1' is missing on your system.  You should only need it if
 
   lex|flex)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
@@ -237,13 +261,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
@@ -262,32 +281,30 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
          indirectly affecting the aspect of the manual.  The spurious
          call might also be the consequence of using a buggy \`make' (AIX,
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
     file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
     if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      # ... or it is the one specified with @setfilename ...
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
     touch $file
     ;;
 
   tar)
     shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
 
     # We have already tried tar in the generic part.
     # Look for gnutar/gtar before invocation to avoid ugly error
@@ -323,10 +340,10 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments.
 
   *)
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
+WARNING: \`$1' is needed, and is $msg.
-         system.  You might have modified some files without having the
+         You might have modified some files without having the
          proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
+         it often tells you about the needed prerequisites for installing
          this package.  You may also peek at any GNU archive site, in case
          some other package would contain this missing \`$1' program."
     exit 1
@@ -334,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
 esac
 
 exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

compile

@@ -1,99 +0,0 @@
-#! /bin/sh
-
-# Wrapper for compilers which do not understand `-c -o'.
-
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Usage:
-# compile PROGRAM [ARGS]...
-# `-o FOO.o' is removed from the args passed to the actual compile.
-
-prog=$1
-shift
-
-ofile=
-cfile=
-args=
-while test $# -gt 0; do
-   case "$1" in
-    -o)
-       # configure might choose to run compile as `compile cc -o foo foo.c'.
-       # So we do something ugly here.
-       ofile=$2
-       shift
-       case "$ofile" in
-	*.o | *.obj)
-	   ;;
-	*)
-	   args="$args -o $ofile"
-	   ofile=
-	   ;;
-       esac
-       ;;
-    *.c)
-       cfile=$1
-       args="$args $1"
-       ;;
-    *)
-       args="$args $1"
-       ;;
-   esac
-   shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-   # If no `-o' option was seen then we might have been invoked from a
-   # pattern rule where we don't need one.  That is ok -- this is a
-   # normal compilation that the losing compiler can handle.  If no
-   # `.c' file was seen then we are probably linking.  That is also
-   # ok.
-   exec "$prog" $args
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
-while true; do
-   if mkdir $lockdir > /dev/null 2>&1; then
-      break
-   fi
-   sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir $lockdir; exit 1" 1 2 15
-
-# Run the compile.
-"$prog" $args
-status=$?
-
-if test -f "$cofile"; then
-   mv "$cofile" "$ofile"
-fi
-
-rmdir $lockdir
-exit $status

configure.ac

@@ -1,29 +1,39 @@
-# make sure we're interpreted by some minimal autoconf
+dnl Copyright (C) 2006 Google Inc.
+dnl
+dnl Licensed under the Apache License, Version 2.0 (the "License");
+dnl you may not use this file except in compliance with the License.
+dnl You may obtain a copy of the License at
+dnl
+dnl     http://www.apache.org/licenses/LICENSE-2.0
+dnl
+dnl Unless required by applicable law or agreed to in writing, software
+dnl distributed under the License is distributed on an "AS IS" BASIS,
+dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+dnl See the License for the specific language governing permissions and
+dnl limitations under the License.
+
+
 AC_PREREQ(2.57)
 
 AC_INIT(airbag, 0.1, opensource@google.com)
-# The argument here is just something that should be in the current directory
+dnl Sanity check: the argument is just a file that should exist.
-# (for sanity checking)
 AC_CONFIG_SRCDIR(README)
-AM_INIT_AUTOMAKE
+AC_CONFIG_AUX_DIR(autotools)
+
+AM_INIT_AUTOMAKE(subdir-objects)
 AM_CONFIG_HEADER(src/config.h)
 
-# Checks for programs.
 AC_PROG_CC
 AC_PROG_CPP
 AC_PROG_CXX
 
+dnl Prevent AC_PROG_LIBTOOL from looking for Fortran support.  We don't use
+dnl any Fortran here.
+define(AC_PROG_F77)
 AC_PROG_LIBTOOL
 AC_SUBST(LIBTOOL_DEPS)
 
-# Check whether some low-level functions/files are available
 AC_HEADER_STDC
 
-# Find out what namespace 'normal' STL code lives in, and also what namespace
-# the user wants our classes to be defined in
-AC_CXX_STL_NAMESPACE
-AC_DEFINE_GOOGLE_NAMESPACE(google_airbag)
-
-# Write generated configuration file
 AC_CONFIG_FILES([Makefile])
 AC_OUTPUT

install-sh

@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	:
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		:
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		:
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		:
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0

mkinstalldirs

@@ -1,99 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
-   case "${1}" in
-     -h | --help | --h* )			# -h for help
-	echo "${usage}" 1>&2; exit 0 ;;
-     -m )					# -m PERM arg
-	shift
-	test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
-	dirmode="${1}"
-	shift ;;
-     -- ) shift; break ;;			# stop option processing
-     -* ) echo "${usage}" 1>&2; exit 1 ;;	# unknown option
-     * )  break ;;				# first non-opt arg
-   esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-0) exit 0 ;;
-esac
-
-case $dirmode in
-'')
-  if mkdir -p -- . 2>/dev/null; then
-    echo "mkdir -p -- $*"
-    exec mkdir -p -- "$@"
-  fi ;;
-*)
-  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-    echo "mkdir -m $dirmode -p -- $*"
-    exec mkdir -m "$dirmode" -p -- "$@"
-  fi ;;
-esac
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-	echo "mkdir $pathcomp"
-
-	mkdir "$pathcomp" || lasterr=$?
-
-	if test ! -d "$pathcomp"; then
-	  errstatus=$lasterr
-	else
-	  if test ! -z "$dirmode"; then
-	     echo "chmod $dirmode $pathcomp"
-
-	     lasterr=""
-	     chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-	     if test ! -z "$lasterr"; then
-	       errstatus=$lasterr
-	     fi
-	  fi
-	fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 3
-# End:
-# mkinstalldirs ends here

src/config.h.in

@@ -1,8 +1,5 @@
 /* src/config.h.in.  Generated from configure.ac by autoheader.  */
 
-/* Namespace for Google classes */
-#undef GOOGLE_NAMESPACE
-
 /* Define to 1 if you have the <dlfcn.h> header file. */
 #undef HAVE_DLFCN_H
 
@@ -12,9 +9,6 @@
 /* Define to 1 if you have the <memory.h> header file. */
 #undef HAVE_MEMORY_H
 
-/* define if the compiler implements namespaces */
-#undef HAVE_NAMESPACES
-
 /* Define to 1 if you have the <stdint.h> header file. */
 #undef HAVE_STDINT_H
 
@@ -57,14 +51,5 @@
 /* Define to 1 if you have the ANSI C header files. */
 #undef STDC_HEADERS
 
-/* the namespace where STL code like vector<> is defined */
-#undef STL_NAMESPACE
-
 /* Version number of package */
 #undef VERSION
-
-/* Stops putting the code inside the Google namespace */
-#undef _END_GOOGLE_NAMESPACE_
-
-/* Puts following code inside the Google namespace */
-#undef _START_GOOGLE_NAMESPACE_

src/processor/source_line_resolver.cc

@@ -19,12 +19,12 @@
 #include <utility>
 #include "source_line_resolver.h"
 
-using STL_NAMESPACE::map;
+using std::map;
-using STL_NAMESPACE::vector;
+using std::vector;
-using STL_NAMESPACE::make_pair;
+using std::make_pair;
 using __gnu_cxx::hash;
 
-_START_GOOGLE_NAMESPACE_
+namespace google_airbag {
 
 void SourceLineResolver::SourceLineInfo::Reset() {
   function_name.clear();
@@ -272,4 +272,4 @@ size_t SourceLineResolver::HashString::operator()(const string &s) const {
   return hash<const char*>()(s.c_str());
 }
 
-_END_GOOGLE_NAMESPACE_
+} // namespace google_airbag

src/processor/source_line_resolver.h

@@ -23,9 +23,9 @@
 #include <string>
 #include <ext/hash_map>
 
-_START_GOOGLE_NAMESPACE_
+namespace google_airbag {
 
-using STL_NAMESPACE::string;
+using std::string;
 using __gnu_cxx::hash_map;
 
 class SourceLineResolver {
@@ -83,6 +83,6 @@ class SourceLineResolver {
   void operator=(const SourceLineResolver&);
 };
 
-_END_GOOGLE_NAMESPACE_
+} // namespace google_airbag
 
 #endif  // _SOLURCE_LINE_RESOLVER_H__

src/processor/source_line_resolver_unittest.cc

@@ -16,8 +16,8 @@
 #include <string>
 #include "source_line_resolver.h"
 
-using STL_NAMESPACE::string;
+using std::string;
-using GOOGLE_NAMESPACE::SourceLineResolver;
+using google_airbag::SourceLineResolver;
 
 #define ASSERT_TRUE(cond) \
   if (!(cond)) {                                                        \