Revised the placement of various new MBEDTLS_PSA_BUILTIN_xxx
guards based on review comments. Corrected guards in psa
test driver to use _ACCEL version instead of _BUILTIN version.
Updated check_config_psa.h to include additional dependency checks
for more algorithms. Renamed some of the new tests to be a little
more clear on the purpose.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
For consistency across the code base, prefer
persistent over permanent to qualify a key
stored in persistent storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When looking for an empty key slot to store
the description of a key, if all key slots
are in use, reuse the first encountered
and unaccessed key slot containing the
description of a permanent key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When psa_close/destroy/purge_key is called, do not
reset a key slot containing the description
of a persistent key if it is currently accessed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add a counter of unaccessed slots and use it
in tests to check that at the end of PSA tests
all key slot are unaccessed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add key slot access counter to be able to
state if a key slot containing the description
of a permanent key can be reset or reset
and re-used.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The identifier of keys created/registred should be in
the application range.
This is by spec for key creation.
This may change for registered key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move all the PSA crypto APIs using key handles
to use key identifiers but psa_key_open() and
psa_key_close(). This is done without modifying
any test as key handles and key identifiers are
now the same.
Update the library modules using PSA crypto APIs
to get rid of key handles.
Programs and unit tests are updated to not use
key handles in subsequent commits, not in this
one.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers are introduced in
PSA Crypto API v1.0.0. They are returned by the APIs
when importing or generating or deriving a volatile key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Updated macros in config_psa.h that used ECC_xxx to use KEY_TYPE_ECC_xxx
per comments from review. Implemented a check_config_psa.h to help with
dependency checking of features enabled in config_psa.h. Added
check_config_psa.h to visual studio project.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In the original attempt to add RSA support to PSA crypto config was too
generic. This set of changes adds support for the following RSA features:
PSA_WANT_ALG_RSA_PKCS1V15_CRYPT, PSA_WANT_ALG_RSA_PKCS1V15_SIGN,
PSA_WANT_ALG_RSA_OAEP, PSA_WANT_ALG_RSA_PSS, PSA_WANT_KEY_TYPE_RSA_KEY_PAIR,
and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY.
There were also some updates to ensure the proper inclusion of PSA crypto
library code when certain features are enabled. These updates were made to
address warnings and errors in builds from the new tests for these
features being added for PSA crypto configuration.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The KEY_TYPE_ECC_KEY_PAIR and KEY_TYPE_ECC_PUBLIC_KEY were previously
being guarded by MBEDTLS_ECP_C in the PSA crypto library code. This change
moves it to the new MBEDTLS_PSA_BUILTIN_xxx and separates KEY_PAIR
and PUBLIC_KEY as needed. Tests have also been added to validate the new
settings.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
This phase adds in support for the following features being
added to the list of features that can be configured in the
include/psa/crypto_config.h header file using the PSA_WANT_ALG_xxx
macros: ECDH, HMAC, HKDF, and RSA. These changes include changes to
the PSA crypto library to use the appropriate new guards that
will allow the feature to be compiled in or out either using
new PSA_WANT_ALG_xxx or the previous MBEDTLS_xxx macros.
For HKDF and HMAC, most of the PSA library code did not have a
specific matching MBEDTLS_xxx macro for that feature, but was instead
using the generic dependent MBEDTLS_MD_C macro. The ECDH and RSA
features more closely aligned with a direct replacement with a similar
macro.
The new tests for RSA, HMAC, and HKDF would normally unset additional
dependent macros, but when attempting to implement that level of
testing it required removal of too many core features like MD_C, PK_C,
ECP_C and other low level features. This may point to additional phases of
work to complete the transition of these features to the new model.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
<string.h> is actually needed when MBEDTLS_ERROR_C is enabled and not
when only MBEDTLS_ERROR_STRERROR_DUMMY is enabled.
Fix#3866.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
With key usage based on key identifiers and not
key handles (openless APIs), volatile keys will
also have a key identifier. Thus, isolate key
identifier validation from key persistence
validation to clarify that key identifiers
are not specific to persistent keys.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
* zero key buffer on failure
* readability improvements
* psa_finish_key_creation adjustment after removing import_key_into_slot
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Use the export keys functionality, to call the public API
`mbedtls_ssl_tls_prf()`, and remove the function
`mbedtls_ssl_get_dtls_srtp_key_material()`.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Check allocation success.
2. Check parameter correctness in the use_srtp extension
in server and client.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Improve readability of the code:
1. move common code to `ssl_internal.h` as `static inline`.
2. Add comments.
3. Use local variables for extension size.
4. Change function signature, by adding buffer size and output length.
5. Take server srtp profile out of the loop.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Add DTLS-SRTP tests in `ssl-opts.sh`
2. Add logs for the tests to filter.
3. Add function to get the profile informations.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Set authmode to `MBEDTLS_SSL_VERIFY_REQUIRED` when using dtls-srtp,
in case authmode was not set. This is to support self signed certificates
received by the server, which is the case with webRTC. Certificate fingerprints
are verified outside the dtls stack, as defined in RFC 5763.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Set correct mki from the `use_srtp` extension.
2. Use mki value received from the client as the mki used by server.
3. Use `mbedtls_ssl_dtls_srtp_set_mki_value()` as a client API only.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Return a debg message that was removed in previous commit,
Whic is searched in the ssl-opts.sh test.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Enforce CertificateRequest, client and server Certificates, and
CertificateVerify messages, which are mandatory in DTLS-SRTP,
as defined in RFC 5764 section 4.1
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Make the key material length in mbedtls_ssl_get_dtls_srtp_key_material
to be in\out, like it is done all over the library
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Add check for prerequisites in check_config.h
2. Add mki value to use_srtp extension
3. address some review comments
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
In the PSA crypto library, the code for verification of ECDSA is the same for
both MBEDTLS_PSA_BUILTIN_ALG_ECDSA and
MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA. So, the guards should allow for
either one to enable the code blocks. The original implementation only had
the check for ECDSA. In order to make this work, config_psa.h was updated
to ensure when MBEDTLS_CRYPTO_CONFIG is disabled, the setting for DETERMINISTIC
is only updated if MBEDTLS_ECDSA_C is also enabled.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Now that there's a validate_key entry point for drivers, it becomes
much more important to separate the import action (where a key needs
to be validated) from the load action (where a key has been
previously validated, and thus re-validating it would be a waste of
time).
This also exposes why not storing the 'bits' attribute persistently
was a bad idea. The only reason there's a rather large function to
detect bit size is because loading from persistent storage requires
it.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
There's no need for calling export-and-import when the key is
guaranteed to have been stored in export representation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This is fix for the MBEDTLS_AES_SETKEY_DEC_ALT macro switch is including the aes xts methods
and building with a custom mbedtls_aes_setkey_dec function will disable the aes xts methods.
The fix is separating the aes xts methods and the MBEDTLS_AES_SETKEY_DEC_ALT can only
switch the presence of the mbedtls_aes_setkey_dec function.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Mbed TLS requires users of DTLS to configure timer callbacks
needed to implement the wait-and-retransmit logic of DTLS.
Previously, the presence of these timer callbacks was checked
at every invocation of `mbedtls_ssl_fetch_input()`, so lowest
layer of the messaging stack interfacing with the underlying
transport.
This commit removes this recurring check and instead checks the
presence of timers once at the beginning of the handshake.
The main rationale for this change is that it is a step towards
separating the various layers of the messaging stack more cleanly:
datagram layer, record layer, message layer, retransmission layer.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Migrate to new syntax where the PUBLIC attribute is explicitly defined.
Avoids issues caused sometimes where cmake does not allow the mixing of
old-style and new-style syntax
Signed-off-by: Raef Coles <raef.coles@arm.com>
Allows required targets to have prefixes added to them, so that external
projects can avoid target names clashing.
Signed-off-by: Raef Coles <raef.coles@arm.com>
The calculation of the expected key size when not using the test_size_function
was not correct. The function has now been updated to handle all cases
properly to ensure the expected key size is correct for key pairs, public
keys, and symmetric keys.
Cleaned up some comments and removed unused includes.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Previous guard was using original naming and did not
get updated to the new name. Guard is now using correct
definition of TEST_DRIVER_KEY_CONTEXT_SIZE_FUNCTION.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Removed TBD comment that is no longer relevant since
that portion of the code has been updated.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Updated get_expected_key_size in psa_crypto_driver_wrappers to properly
handle using the new size_function from PSA crypto drivers. Created
initial infrastructure to support size_function for the PSA crypto
drivers.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The psa crypto library was generically using PSA_WANT_ALG_xxx, but
should have been using the correct MBEDTLS_PSA_BUILTIN_ALG_xxx
definition since that code is the builtin version. There were also
a couple of spots that needed to ensure the code block was enabled
for either ECDSA or DETERMINISTIC_ECDSA, not just one of them.
Fixed all the new ALG_ECDSA_DETERMINISTIC names to be
ALG_DETERMINISTIC_ECDSA instead.
Fixed test to use correct definitions.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The CCM specification (NIST SP 800-38C) mandates that the formatting of
the additional data length l(a) changes when it is greater _or equal_ to
2^16 - 2^8 (>= 0xFF00). Since such lengths are not supported in mbed TLS,
the operation should fail in such cases.
This commit fixes an off-by-one error which allowed encryption/decryption
to be executed when l(a) was equal to 0xFF00, resulting in an
incorrect/non-standard length format being used.
Fixes#3719.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Stores bits in psa_persistent_key_storage_format.
* psa_load_persistent_key_into_slot still imports plaintext keys which
ensures that the bits value gets set.
* Updates key specification to match new implementation.
* Expands persistent store and load tests with to check for bits
attribute.
* Removes bits storage from psa_se_key_data_storage_t.
Signed-off-by: Torstein Nesse <torstein.nesse@silabs.com>
* #3742 After input of a key as SECRET in the derivation, allow the
derivation result to be used as key.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* #3741 Allow key agreement inside derivation with a key that's allowed
for the relevant agreement.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This change fixes the decrypt cipher setup function to return the
appropriate error code of PSA_ERROR_NOT_SUPPORTED instead of
PSA_ERROR_BAD_STATE for invalid locations when the setup call is made.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
This reverts commit 9c46a60e6c.
When the library is dynamically linked against Glibc (as is usually
the case with Glibc), it now requires a recent Glibc at runtime if it
was compiled with a recent Glibc. This is a loss of functionality for
no demonstrated benefit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In psa_generate_key_internal() for ECC keys, remove the check that the
bit-size according to Mbed TLS is equal to the requested bit-size.
This check was necessary back when the PSA API encoded curves and key
sizes independently, in order to reject combinations such as SECP256R1
with a 512-bit size. Since the curve encoding changed to specifying a
curve family and a size separately, the Mbed TLS curve id (grp_id) and
the curve data (curve_info) are now determined from the size, and
checking that (curve_info->bit_size == bits) is now only a redundant
sanity check.
This check is actually buggy, because PSA Crypto and Mbed TLS don't
have exactly the same notion of key size. PSA thinks Curve25519 is
255-bit and secp224k1 is 225-bit, but Mbed TLS thinks they're 256-bit
and 224-bit respectively. Removing the check allows key generation to
work for these curves.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ecp_curve_list() now lists Curve25519 and Curve448 under the names
"x25519" and "x448". These curves support ECDH but not ECDSA.
This was meant ever since the introduction of mbedtls_ecdsa_can_do()
in 0082f9df6f, but
2c69d10bac had removed the claim
that Montgomery curves support ECDH except through Everest.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
... as opposed to PSA_ERROR_BAD_STATE.
The spec on psa_cipher_finish() states that PSA_ERROR_INVALID_ARGUMENT
should be returned when:
"The total input size passed to this operation is not valid for this
particular algorithm. For example, the algorithm is a based on block
cipher and requires a whole number of blocks, but the total input size
is not a multiple of the block size."
Currently, there is a distinction between encryption and decryption
on whether INVALID_ARGUMENT or BAD_STATE is returned, but this is not
a part of the spec.
This fix ensures that PSA_ERROR_INVALID_ARGUMENT is returned
consistently on invalid cipher input sizes.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
With the new feature MBEDTLS_PSA_CRYPTO_CONFIG, needed to
add support that when the feature is disabled, if there
are defines like MBEDTLS_ECDSA_C defined, then the PSA_WANT_
equivalent define is also enabled. This ensures the guards in
the library psa_crypto will work properly.
Also fixed an error return code in the driver wrapper for cipher
encrypt setup so it will properly pass unit tests.
Ensured config.py full works properly with the new
MBEDTLS_PSA_CRYPTO_CONFIG, it should not be set when the full
option is used.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Starting with commit 49e94e3, the do/while loop in
`rsa_prepare_blinding()` was changed to a `do...while(0)`, which
prevents retry from being effective and leaves dead code.
Restore the while condition to retry, and lift the calls to finish the
computation out of the while loop by by observing that they are
performed only when `mbedtls_mpi_inv_mod()` returns zero.
Signed-off-by: Peter Kolbus <peter.kolbus@garmin.com>
The version features library needed updating to support the new
MBEDTLS_PSA_CRYPTO_CONFIG definition.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Initial changes to PSA crypto core to support configuration
of ECDSA algorithm using PSA crypto configuration mechanism.
Guards using MBEDTLS_ECDSA_C and MBEDTLS_ECDSA_DETERMINISTIC have
been changed to be based off PSA_WANT_ALG_ECDSA and
PSA_WANT_ALG_ECDSA_DETERMINISTIC. Added new tests to all.sh to
confirm new settings are working properly. Current code does not
pass the tests since built in signature verification is not in place.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
According to https://www.bearssl.org/ctmul.html even single-precision
multiplication is not constant-time on some older platforms.
An added benefit of the new code is that it removes the somewhat mysterious
constant 0x1ff - which was selected because at that point the maximum value of
padlen was 256. The new code is perhaps a bit more readable for that reason.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The previous code used comparison operators >= and == that are quite likely to
be compiled to branches by some compilers on some architectures (with some
optimisation levels).
For example, take the following function:
void old_update( size_t data_len, size_t *padlen )
{
*padlen *= ( data_len >= *padlen + 1 );
}
With Clang 3.8, let's compile it for the Arm v6-M architecture:
% clang --target=arm-none-eabi -march=armv6-m -Os foo.c -S -o - |
sed -n '/^old_update:$/,/\.size/p'
old_update:
.fnstart
@ BB#0:
.save {r4, lr}
push {r4, lr}
ldr r2, [r1]
adds r4, r2, #1
movs r3, #0
cmp r4, r0
bls .LBB0_2
@ BB#1:
mov r2, r3
.LBB0_2:
str r2, [r1]
pop {r4, pc}
.Lfunc_end0:
.size old_update, .Lfunc_end0-old_update
We can see an unbalanced secret-dependant branch, resulting in a total
execution time depends on the value of the secret (here padlen) in a
straightforward way.
The new version, based on bit operations, doesn't have this issue:
new_update:
.fnstart
@ BB#0:
ldr r2, [r1]
subs r0, r0, #1
subs r0, r0, r2
asrs r0, r0, #31
bics r2, r0
str r2, [r1]
bx lr
.Lfunc_end1:
.size new_update, .Lfunc_end1-new_update
(As a bonus, it's smaller and uses less stack.)
While there's no formal guarantee that the version based on bit operations in
C won't be translated using branches by the compiler, experiments tend to show
that's the case [1], and it is commonly accepted knowledge in the practical
crypto community that if we want to sick to C, bit operations are the safest
bet [2].
[1] https://github.com/mpg/ct/blob/master/results
[2] https://github.com/veorq/cryptocoding
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* Reworked the cipher context once again to be more robustly defined
* Removed redundant memset
* Unified behaviour on failure between driver and software in cipher_finish
* Cipher test driver setup function now also returns early when its status
is overridden, like the other test driver functions
* Removed redundant test cases
* Added bad-order checking to verify the driver doesn't get called where
the spec says it won't.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
As pointed out by Ronald. The key slot is populated using
get_key_from_slot, and after calling the driver the slot is
validated to not contain an external key, so calling
get_transparent_key is superfluous.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Added zeroization of the wrapper context on failure/abort, and reliance on
the crypto core to not call an uninitialised wrapper.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Once an operation has been 'accepted' by a driver, the remainder is bound
to the same driver, since driver-specific context structs cannot be shared.
This provides a pretty good gate mechanism for the fallback logic, too.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
