None of the test cases in tests_suite_memory_buffer_alloc actually
need MBEDTLS_MEMORY_DEBUG. Some have additional checks when
MBEDTLS_MEMORY_DEBUG but all are useful even without it. So enable
them all and #ifdef out the parts that require DEBUG.
The test case "Memory buffer small buffer" emits a message
"FATAL: verification of first header failed". In this test case, it's
actually expected, but it looks weird to see this message from a
passing test. Add a comment that states this explicitly, and modify
the test description to indicate that the failure is expected, and
change the test function name to be more accurate.
Fix#309
The default entropy nonce length is either zero or nonzero depending
on the desired security strength and the entropy length.
The implementation calculates the actual entropy nonce length from the
actual entropy length, and therefore it doesn't need a constant that
indicates the default entropy nonce length. A portable application may
be interested in this constant, however. And our test code could
definitely use it.
Define a constant MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN and use it in
test code. Previously, test_suite_ctr_drbg had knowledge about the
default entropy nonce length built in and test_suite_psa_crypto_init
failed. Now both use MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN.
This change means that the test ctr_drbg_entropy_usage no longer
validates that the default entropy nonce length is sensible. So add a
new test that checks that the default entropy length and the default
entropy nonce length are sufficient to ensure the expected security
strength.
Change the default entropy nonce length to be nonzero in some cases.
Specifically, the default nonce length is now set in such a way that
the entropy input during the initial seeding always contains enough
entropy to achieve the maximum possible security strength per
NIST SP 800-90A given the key size and entropy length.
If MBEDTLS_CTR_DRBG_ENTROPY_LEN is kept to its default value,
mbedtls_ctr_drbg_seed() now grabs extra entropy for a nonce if
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled and either
MBEDTLS_ENTROPY_FORCE_SHA256 is enabled or MBEDTLS_SHA512_C is
disabled. If MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled, or if
the entropy module uses SHA-512, then the default value of
MBEDTLS_CTR_DRBG_ENTROPY_LEN does not require a second call to the
entropy function to achieve the maximum security strength.
This choice of default nonce size guarantees NIST compliance with the
maximum security strength while keeping backward compatibility and
performance high: in configurations that do not require grabbing more
entropy, the code will not grab more entropy than before.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
This removes the need for the test-only function
mbedtls_ctr_drbg_seed_entropy_len(). Just call
mbedtls_ctr_drbg_set_entropy_len() followed by
mbedtls_ctr_drbg_seed(), it works now.
Consolidate the invalid-handle tests from test_suite_psa_crypto and
test_suite_psa_crypto_slot_management. Start with the code in
test_suite_psa_crypto_slot_management and adapt it to test one invalid
handle value per run of the test function.
mbedtls_asn1_get_int() and mbedtls_asn1_get_mpi() behave differently
on negative INTEGERs (0200). Don't change the library behavior for now
because this might break interoperability in some applications. Change
the test function to the library behavior.
Fix the test data with negative INTEGERs. These test cases were
previously not run (they were introduced but deliberately deactivated
in 27d806fab4). The test data was
actually wrong: ASN.1 uses two's complement, which has no negative 0,
and some encodings were wrong. Now the tests have correct data, and
the test code rectifies the expected data to match the library
behavior.
mbedtls_asn1_get_int() and mbedtls_asn1_get_mpi() behave differently
on an empty INTEGER (0200). Don't change the library behavior for now
because this might break interoperability in some applications. Write
a test function that matches the library behavior.
When the asn1parse module is enabled but the bignum module is
disabled, the asn1parse test suite did not work. Fix this.
* Fix a syntax error in get_integer() (label immediately followed by a
closing brace).
* Fix an unused variable in get_integer().
* Fix `TEST_ASSERT( *p == q );` in nested_parse() failing because `*p`
was not set.
* Fix nested_parse() not outputting the length of what it parsed.
Add some ECDSA test cases where the hash is shorter or longer than the
key length, to check that the API doesn't enforce a relationship
between the two.
For the sign_deterministic tests, the keys are
tests/data_files/ec_256_prv.pem and tests/data_files/ec_384_prv.pem
and the signatures were obtained with Python Cryptodome:
from binascii import hexlify, unhexlify
from Crypto.Hash import SHA256, SHA384
from Crypto.PublicKey import ECC
from Crypto.Signature import DSS
k2 = ECC.import_key(unhexlify("3077020101042049c9a8c18c4b885638c431cf1df1c994131609b580d4fd43a0cab17db2f13eeea00a06082a8648ce3d030107a144034200047772656f814b399279d5e1f1781fac6f099a3c5ca1b0e35351834b08b65e0b572590cdaf8f769361bcf34acfc11e5e074e8426bdde04be6e653945449617de45"))
SHA384.new(b'hello').hexdigest()
hexlify(DSS.new(k2, 'deterministic-rfc6979').sign(SHA384.new(b'hello')))
k3 = ECC.import_key(unhexlify("3081a402010104303f5d8d9be280b5696cc5cc9f94cf8af7e6b61dd6592b2ab2b3a4c607450417ec327dcdcaed7c10053d719a0574f0a76aa00706052b81040022a16403620004d9c662b50ba29ca47990450e043aeaf4f0c69b15676d112f622a71c93059af999691c5680d2b44d111579db12f4a413a2ed5c45fcfb67b5b63e00b91ebe59d09a6b1ac2c0c4282aa12317ed5914f999bc488bb132e8342cc36f2ca5e3379c747"))
SHA256.new(b'hello').hexdigest()
hexlify(DSS.new(k3, 'deterministic-rfc6979').sign(SHA256.new(b'hello')))
There were tests to ensure that each entropy source reaches its
threshold, but no test that covers the total amount of entropy. Add
test cases with a known set of entropy sources and make sure that we
always gather at least MBEDTLS_ENTROPY_BLOCK_SIZE bytes from a strong
source.
Always pass a context object to entropy_dummy_source. This lets us
write tests that register more than one source and keep track of how
many times each one is called.
* origin/pr/2843: (26 commits)
Make hyperlink a hyperlink in every markdown flavor
Update the crypto submodule to be the same as development
Document test case descriptions
Restore MBEDTLS_TEST_OUTCOME_FILE after test_default_out_of_box
ssl-opt.sh: Fix some test case descriptions
Reject non-ASCII characters in test case descriptions
Process input files as binary
Factor description-checking code into a common function
Fix cosmetic error in warnings
Fix regex matching run_test calls in ssl-opt.sh
all.sh: run check-test-cases.py
Better information messages for quick checks
Fix configuration short name in key-exchanges.pl
Make test case descriptions unique
New test script check-test-cases.py
Document the test outcome file
Create infrastructure for architecture documents in Markdown
all.sh --outcome-file creates an outcome file
Set meaningful test configuration names when running tests
ssl-opt: remove semicolons from test case descriptions
...
Add invasive checks that peek at the stored persistent data after some
successful import, generation or destruction operations and after
reinitialization to ensure that the persistent data in storage has the
expected content.
Add a parameter to the p_validate_slot_number method to allow the
driver to modify the persistent data.
With the current structure of the core, the persistent data is already
updated. All it took was adding a way to modify it.
When registering a key in a secure element, go through the transaction
mechanism. This makes the code simpler, at the expense of a few extra
storage operations. Given that registering a key is typically very
rare over the lifetime of a device, this is an acceptable loss.
Drivers must now have a p_validate_slot_number method, otherwise
registering a key is not possible. This reduces the risk that due to a
mistake during the integration of a device, an application might claim
a slot in a way that is not supported by the driver.
If none of the inputs to a key derivation is a
PSA_KEY_DERIVATION_INPUT_SECRET passed with
psa_key_derivation_input_key(), forbid
psa_key_derivation_output_key(). It usually doesn't make sense to
derive a key object if the secret isn't itself a proper key.
After passing some inputs, try getting one byte of output, just to
check that this succeeds (for a valid sequence of inputs) or fails
with BAD_STATE (for an invalid sequence of inputs). Either output a
1-byte key or a 1-byte buffer depending on the test data.
The test data was expanded as follows:
* Output key type (or not a key): same as the SECRET input if success
is expected, otherwise NONE.
* Expected status: PSA_SUCCESS after valid inputs, BAD_STATE after any
invalid input.
Allow a direct input as the SECRET input step in a key derivation, in
addition to allowing DERIVE keys. This makes it easier for
applications to run a key derivation where the "secret" input is
obtained from somewhere else. This makes it possible for the "secret"
input to be empty (keys cannot be empty), which some protocols do (for
example the IV derivation in EAP-TLS).
Conversely, allow a RAW_DATA key as the INFO/LABEL/SALT/SEED input to a key
derivation, in addition to allowing direct inputs. This doesn't
improve security, but removes a step when a personalization parameter
is stored in the key store, and allows this personalization parameter
to remain opaque.
Add test cases that explore step/key-type-and-keyhood combinations.
This commit only makes derive_input more flexible so that the key
derivation API can be tested with different key types and raw data for
each input step. The behavior of the test cases remains the same.
The uint32 is given as a bigendian stream, in the tests, however,
the char buffer that collected the stream read it as is,
without converting it. Add a temporary buffer, to call `greentea_getc()`
8 times, and then put it in the correct endianity for input to `unhexify()`.
Reduce the stack usage of the `test_suite_pkcs1_v21` by reducing the
size of the buffers used in the tests, to a reasonable big enough size,
and change the size sent to the API to sizeof output.
Reduce the stack usage of the `test_suite_rsa` by reducing the
size of the buffers used in the tests, to a reasonable big enough size,
and change the data size to decrypt in the data file.
The current test generator code accepts multiple colons as a
separator, but this is just happenstance due to how the code, it isn't
robust. Replace "::" by ":", which is more future-proof and allows
simple separator-based navigation.
Make check-test-cases.py pass.
Prior to this commit, there were many repeated test descriptions, but
none with the same test data and dependencies and comments, as checked
with the following command:
for x in tests/suites/*.data; do perl -00 -ne 'warn "$ARGV: $. = $seen{$_}\n" if $seen{$_}; $seen{$_}=$.' $x; done
Wherever a test suite contains multiple test cases with the exact same
description, add " [#1]", " [#2]", etc. to make the descriptions
unique. We don't currently use this particular arrangement of
punctuation, so all occurrences of " [#" were added by this script.
I used the following ad hoc code:
import sys
def fix_test_suite(data_file_name):
in_paragraph = False
total = {}
index = {}
lines = None
with open(data_file_name) as data_file:
lines = list(data_file.readlines())
for line in lines:
if line == '\n':
in_paragraph = False
continue
if line.startswith('#'):
continue
if not in_paragraph:
# This is a test case description line.
total[line] = total.get(line, 0) + 1
index[line] = 0
in_paragraph = True
with open(data_file_name, 'w') as data_file:
for line in lines:
if line in total and total[line] > 1:
index[line] += 1
line = '%s [#%d]\n' % (line[:-1], index[line])
data_file.write(line)
for data_file_name in sys.argv[1:]:
fix_test_suite(data_file_name)
A test case for 32+0 was present three times, evidently overeager
copy-paste. Replace the duplicates by test cases that read more than
32 bytes, which exercises HKDF a little more (32 bytes is significant
because HKDF-SHA-256 produces output in blocks of 32 bytes).
I obtained the test data by running our implementation, because we're
confident in our implementation now thanks to other test cases: this
data is useful as a non-regression test.
There should have been a good-saltlen test case and a bad-saltlen test
case for both sizes 522 and 528, but the 522-bad-saltlen test case was
missing and the 528-good-saltlen test case was repeated. Fix this.
Don't use semicolons in test case descriptions. The test outcome file
is a semicolon-separated CSV file without quotes to keep things
simple, so fields in that file may not contain semicolons.
If the environment variable MBEDTLS_TEST_OUTCOME_FILE is set, then for
each test case, write a line to the file with the given name, of the
form
PLATFORM;CONFIGURATION;TEST SUITE;TEST CASE DESCRIPTION;PASS/FAIL/SKIP;CAUSE
PLATFORM and CONFIGURATION come from the environment variables
MBEDTLS_TEST_PLATFORM and MBEDTLS_TEST_CONFIGURATION.
Errors while writing the test outcome file are not considered fatal,
and are not reported except for an error initially opening the file.
This is in line with other write errors that are not checked.
This commit adds multiple test cases to the X.509 CRT parsing test suite
exercising the stack's behaviour when facing CertificatePolicy extensions
that are malformed for a variety of reasons. It follows the same scheme
as in other negative parsing tests: For each ASN.1 component, have test
cases for (a) unexpected tag, (b) missing length, (c) invalid length
encoding, (d) length out of bounds.
This commit modifies the test
X509 CRT ASN1 (TBSCertificate v3, inv CertificatePolicies, data missing)
which exercises the behaviour of the X.509 CRT parser when facing a
CertificatePolicy extension with empty data field.
The following adaptations are made:
- The subject ID and issuer ID are modified to have length 0.
The previous values `aa` and `bb` are OK, but a generic ASN.1
parser will try to interpret them as ASN.1 tags and fail. For
maintainability, it's therefore better to use something that
can be parsed as ASN.1, and an empty ID is the easiest solution
here.
- The TBS part of the certificate wasn't followed by signature
algorithm and signature fields, which makes the test incompatible
with future changes swapping to breadth-first parsing of
certificates.
This commit moves the X.509 negative parsing tests for the
CertificatePolicy extension to the place where negative
testing of other extensions happens.
Judging from its name, the purpose of the test
TBSCertificate v3, ext CertificatePolicies tag, bool len missing
in test_suite_x509parse.data is to exercise the X.509 parsing stack's
behaviour when parsing a CertificatePolicy extension which lacks the
length field of the boolean 'Criticality' value.
However, the test fails at an earlier stage due to a mismatch of inner
and outer length of the explicit ASN.1 extensions structure.
Since we already have tests exercising
- mismatch of inner and outer length in the extensions structure, namely
'X509 CRT ASN1 (TBS, inv v3Ext, inner tag invalid)'
- missing length of the 'Criticality' field in an extension, namely
'X509 CRT ASN1 (TBS, inv v3Ext, critical length missing)'
and since for both tests there's no relevance to the use of the
policy extension OID, the test
'TBSCertificate v3, ext CertificatePolicies tag, bool len missing'
can be dropped.
The signature must have exactly the same length as the key, it can't
be longer. Fix#258
If the signature doesn't have the correct size, that's an invalid
signature, not a problem with an output buffer size. Fix the error code.
Add test cases.
In psa_asymmetric_sign, immediately reject an empty signature buffer.
This can never be right.
Add test cases (one RSA and one ECDSA).
Change the SE HAL mock tests not to use an empty signature buffer.
Add tests for derivation.
Test both 7 bits and 9 bits, in case the implementation truncated the
bit size down and 7 was rejected as 0 rather than because it isn't a
multiple of 8.
There is no corresponding test for import because import determines
the key size from the key data, which is always a whole number of bytes.
Tweak test data for one test case to not rely on mbedtls_asn1_get_int
lacking support for leading zeros. Instead, use a number that is
actually out of range for int.
Tweak test data for one test case to not rely on
mbedtls_asn1_get_bitstring_null rejecting bitstrings shorter than two
octets. Instead, try bit strings that are genuinely invalid, or have a
nonzero number of unused bits.
Add a test case with a correct empty signature. This is commented out
because asn1parse currently does not support this. Uncomment it when
asn1parse is updated to support this.
The new macro ASSERT_ALLOC_WEAK does not fail the test case if the
memory allocation fails. This is useful for tests that allocate a
large amount of memory, but that aren't useful on platforms where
allocating such a large amount is not possible.
Ideally this macro should mark the test as skipped. We don't yet have
a facility for that but we're working on it. Once we have a skip
functionality, this macro should be changed to use it.
Use the test-many-sizes framework for string writes as
well (previously, it was only used for booleans and integers). This
way, more edge cases are tested with less test code.
This commit removes buffer overwrite checks. Instead of these checks,
run the test suite under a memory sanitizer (which we do in our CI).
Omit negative integers and MPIs that would result in values that look
like negative INTEGERs, since the library doesn't respect the
specifications there, but fixing it has a serious risk of breaking
interoperability when ASN.1 is used in X.509 and other
cryptography-related applications.
Add self-contained ASN.1 parsing tests, so that ASN.1 parsing is not
solely tested through X.509 and TLS.
The tests cover every function and almost complete line coverage in
asn1parse.c.
A few test cases containing negative and edge case INTEGER values are
deliberately deactivated because the historical library behavior is at
odds with official specifications, but changing the behavior might
break interoperability.
Other than that, these tests revealed a couple of minor bugs which
will be fixed in subsequent commits.
This leak wasn't discovered by the CI because the only test in
all.sh exercising the respective path enabled the custom memory
buffer allocator implementations of calloc() and free(), hence
bypassing ASan.
In preparation of deprecating the old and less secure deterministic
ECDSA signature function we need to remove it from the test. At the
same time, the new function needs to be tested. Modifying the tests
to use the new function achieves both of these goals.
* crypto/development: (863 commits)
crypto_platform: Fix typo
des: Reduce number of self-test iterations
Fix -O0 build for Aarch64 bignum multiplication.
Make GNUC-compatible compilers use the right mbedtls_t_udbl again on Aarch64 builds.
Add optimized bignum multiplication for Aarch64.
Enable 64-bit limbs for all Aarch64 builds.
HMAC DRBG: Split entropy-gathering requests to reduce request sizes
psa: Use application key ID where necessary
psa: Adapt set_key_id() for when owner is included
psa: Add PSA_KEY_ID_INIT
psa: Don't duplicate policy initializer
crypto_extra: Use const seed for entropy injection
getting_started: Update for PSA Crypto API 1.0b3
Editorial fixes.
Cross reference 'key handles' from INVALID_HANDLE
Update documentation for psa_destroy_key
Update documentation for psa_close_key
Update psa_open_key documentation
Remove duplicated information in psa_open_key
Initialize key bits to max size + 1 in psa_import_key
...
Bring Mbed TLS 2.18.0 and 2.18.1 release changes back into the
development branch. We had branched to release 2.18.0 and 2.18.1 in
order to allow those releases to go out without having to block work on
the `development` branch.
Manually resolve conflicts in the Changelog by moving all freshly addded
changes to a new, unreleased version entry.
Reject changes to include/mbedtls/platform.h made in the mbedtls-2.18
branch, as that file is now sourced from Mbed Crypto.
* mbedtls-2.18:
platform: Include stdarg.h where needed
Update Mbed Crypto to contain mbed-crypto#152
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
ChangeLog: Enable builds as a CMake subproject
Remove use of CMAKE_SOURCE_DIR
Update library version to 2.18.0
This commit introduces a new SSL error code
`MBEDTLS_ERR_SSL_VERSION_MISMATCH`
which can be used to indicate operation failure due to a
mismatch of version or configuration.
It is put to use in the implementation of `mbedtls_ssl_session_load()`
to signal the attempt to de-serialize a session which has been serialized
in a build of Mbed TLS using a different version or configuration.
This commit improves the test exercising the behaviour of
session deserialization when facing an unexpected version
or config, by testing ver/cfg corruption at any bit in the
ver/cfg header of the serialized data; previously, it had
only tested the first bit of each byte.
The chosen fix matches what's currently done in the baremetal branch - except
the `#ifdef` have been adapted because now in baremetal the digest is not kept
if renegotiation is disabled.
We have explicit recommendations to use US spelling for technical writing, so
let's apply this to code as well for uniformity. (My fingers tend to prefer UK
spelling, so this needs to be fixed in many places.)
sed -i 's/\([Ss]eriali\)s/\1z/g' **/*.[ch] **/*.function **/*.data ChangeLog
This test works regardless of the serialisation format and embedded pointers
in it, contrary to the load-save test, though it requires more maintenance of
the test code (sync the member list with the struct definition).
This uncovered a bug that led to a double-free (in practice, in general could
be free() on any invalid value): initially the session structure is loaded
with `memcpy()` which copies the previous values of pointers peer_cert and
ticket to heap-allocated buffers (or any other value if the input is
attacker-controlled). Now if we exit before we got a chance to replace those
invalid values with valid ones (for example because the input buffer is too
small, or because the second malloc() failed), then the next call to
session_free() is going to call free() on invalid pointers.
This bug is fixed in this commit by always setting the pointers to NULL right
after they've been read from the serialised state, so that the invalid values
can never be used.
(An alternative would be to NULL-ify them when writing, which was rejected
mostly because we need to do it when reading anyway (as the consequences of
free(invalid) are too severe to take any risk), so doing it when writing as
well is redundant and a waste of code size.)
Also, while thinking about what happens in case of errors, it became apparent
to me that it was bad practice to leave the session structure in an
half-initialised state and rely on the caller to call session_free(), so this
commit also ensures we always clear the structure when loading failed.
This test appeared to be passing for the wrong reason, it's actually not
appropriate for the current implementation. The serialised data contains
values of pointers to heap-allocated buffers. There is no reason these should
be identical after a load-save pair. They just happened to be identical when I
first ran the test due to the place of session_free() in the test code and the
fact that the libc's malloc() reused the same buffers. The test no longer
passes if other malloc() implementations are used (for example, when compiling
with asan which avoids re-using the buffer, probably for better error
detection).
So, disable this test for now (we can re-enable it when we changed how
sessions are serialised, which will be done in a future PR, hence the name of
the dummy macro in depends_on). In the next commit we're going to add a test
that save-load is the identity instead - which will be more work in testing as
it will require checking each field manually, but at least is reliable.
This initial test ensures that a load-save function is the identity. It is so
far incomplete in that it only tests sessions without tickets or certificate.
This will be improved in the next commits.
* crypto/pr/212: (337 commits)
Make TODO comments consistent
Fix PSA tests
Fix psa_generate_random for >1024 bytes
Add tests to generate more random than MBEDTLS_CTR_DRBG_MAX_REQUEST
Fix double free in psa_generate_key when psa_generate_random fails
Fix copypasta in test data
Avoid a lowercase letter in a macro name
Correct some comments
Fix PSA init/deinit in mbedtls_xxx tests when using PSA
Make psa_calculate_key_bits return psa_key_bits_t
Adjust secure element code to the new ITS interface
More refactoring: consolidate attribute validation
Fix policy validity check on key creation.
Add test function for import with a bad policy
Test key creation with an invalid type (0 and nonzero)
Remove "allocated" flag from key slots
Take advantage of psa_core_key_attributes_t internally #2
Store the key size in the slot in memory
Take advantage of psa_core_key_attributes_t internally: key loading
Switch storage functions over to psa_core_key_attributes_t
...
Drivers that allow destroying a key must have a destroy method. This
test bug was previously not caught because of an implementation bug
that lost the error triggered by the missing destroy method.
Add a flow where the key is imported or fake-generated in the secure
element, then call psa_export_public_key and do the software
verification with the public key.
Factor common code of ram_import and ram_fake_generate into a common
auxiliary function.
Reject key types that aren't supported by this test code.
Report the bit size correctly for EC key pairs.
The methods to import and generate a key in a secure element drivers
were written for an earlier version of the application-side interface.
Now that there is a psa_key_attributes_t structure that combines all
key metadata including its lifetime (location), type, size, policy and
extra type-specific data (domain parameters), pass that to drivers
instead of separate arguments for each piece of metadata. This makes
the interface less cluttered.
Update parameter names and descriptions to follow general conventions.
Document the public-key output on key generation more precisely.
Explain that it is optional in a driver, and when a driver would
implement it. Declare that it is optional in the core, too (which
means that a crypto core might not support drivers for secure elements
that do need this feature).
Update the implementation and the tests accordingly.
Register an existing key in a secure element.
Minimal implementation that doesn't call any driver method and just
lets the application declare whatever it wants.
Pass the key creation method (import/generate/derive/copy) to the
driver methods to allocate or validate a slot number. This allows
drivers to enforce policies such as "this key slot can only be used
for keys generated inside the secure element".
Allow the application to choose the slot number in a secure element,
rather than always letting the driver choose.
With this commit, any application may request any slot. In an
implementation with isolation, it's up to the service to filter key
creation requests and apply policies to limit which applications can
request which slot.
Test the behavior of the getter/setter functions.
Test that psa_get_key_slot_number() reports a slot number for a key in
a secure element, and doesn't report a slot number for a key that is
not in a secure element.
Test that psa_get_key_slot_number() reports the correct slot number
for a key in a secure element.
Add tests that call psa_generate_random() (possibly via
psa_generate_key()) with a size that's larger than
MBEDTLS_CTR_DRBG_MAX_REQUEST. This causes psa_generate_random() to
fail because it calls mbedtls_ctr_drbg_random() without taking the
maximum request size of CTR_DRBG into account.
Non-regression test for #206
Conflicts and changes:
* Files that do not exist in Mbed Crypto and have changed in Mbed TLS:
These files should not exist in Mbed Crypto. Keep them deleted.
* tests/data_files/test-ca.server1.db: new file in Mbed TLS, don't create
it in Mbed Crypto.
* tests/data_files/rsa_pkcs1_1024_clear.pem: do create this file in
Mbed Crypto. I don't see why it would be kept out.
* tests/data_files/Makefile: don't take any of the changes in sections
that have been removed in Crypto. Do take in the certificate
expiration date updates and the extra .crt.der rules (even if Crypto
doesn't actually use those certificates: removing them would be out
of scope of the present merge).
* tests/suites/helpers.function: consecutive additions, take
both (order indifferent).
In tests of mbedtls_cipher_xxx and mbedtls_pk_xxx with
MBEDTLS_USE_PSA_CRYPTO enabled, initialize and deinitialize the PSA
subsystem in every function. Before, the tests were only passing
because the first function to be called happened to call
psa_crypto_init() but not mbedtls_psa_crypto_free(). In some
configurations (not tested on CI), psa_crypto_init() was not called so
the tests using PSA failed.
Call PSA_DONE() at the end of each test function. This ensures that no
resources are leaked in the form of PSA crypto slot contents.
Incidentally, this also fixes a build error due to
test_helper_psa_done() being unused in test_suite_pk: the fact that it
wasn't used betrayed the missing calls to PSA_DONE().
Conflict resolution:
* `scripts/config.pl`:
Take the exclusion of `MBEDTLS_PSA_CRYPTO_SE_C` from the API branch.
Take the removal of `MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C` (obsolete) from
the development branch.
* `tests/scripts/all.sh`:
Multiple instances of factoring a sequence of `config.pl` calls into
a mere `config.pl baremetal` in the development branch, and a change in
the composition of `baremetal` in the API branch. In each case, take the
version from development.
* `tests/suites/test_suite_psa_crypto_slot_management.function`:
A function became non-static in development and disappeared in the API
branch. Keep the version from the API branch. Functions need to be
non-static if they're defined but unused in some configurations,
which is not the case for any function in this file at the moment.
* `tests/suites/test_suite_psa_crypto.function`:
Consecutive changes in the two branches, reconciled.
Resolve conflicts by performing the following operations:
- Reject changes related to building a crypto submodule, since Mbed
Crypto is the crypto submodule.
- Reject X.509, NET, and SSL changes.
- Reject changes to README, as Mbed Crypto is a different project from
Mbed TLS, with a different README.
- Avoid adding mention of ssl-opt.sh in a comment near some modified
code in include/CMakeLists.txt (around where ENABLE_TESTING as added).
- Align config.pl in Mbed TLS with config.pl in Mbed Crypto where PSA
options are concerned, to make future merging easier. There is no
reason for the two to be different in this regard, now that Mbed TLS
always depends on Mbed Crypto. Remaining differences are only the
PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER option and the absence of X.509,
NET, and SSL related options in Mbed Crypto's config.pl.
- Align config.h in Mbed Crypto with Mbed TLS's copy, with a few notable
exceptions:
- Leave CMAC on by default.
- Leave storage on by default (including ITS emulation).
- Avoid documenting the PSA Crypto API as is in beta stage in
documentation for MBEDTLS_PSA_CRYPTO_C.
The only remaining differences are a lack of X.509, NET, and SSL
options in Mbed Crypto's config.h, as well as an additional
Mbed-Crypto-specific PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER option.
Documentation for the check params feature and related macros is also
updated to match Mbed TLS's description.
- Reject tests/data_files/Makefile changes to generate DER versions of
CRTs and keys, as none of those are used by Mbed Crypto tests.
- Add the "no PEM and no filesystem" test to all.sh, without ssl-opt.sh
run, as Mbed Crypto doesn't have ssl-opt.sh. Also remove use of PSA
Crypto storage and ITS emulation, since those depend on filesystem
support.
- Reject addition of test when no ciphersuites have MAC to all.sh, as
the option being tested, MBEDTLS_SSL_SOME_MODES_USE_MAC, is not
present in Mbed Crypto.
- Use baremetal config in all.sh, as Mbed Crypto's baremetal
configuration does exclude the net module (as it doesn't exist in Mbed
Crypto)
- Reject cmake_subproject_build changes, continuing to link only
libmbedcrypto.
- Reject changes to visualc and associated templates. Mbed Crypto
doesn't need additional logic to handle submodule-sourced headers.
- Avoid adding fuzzers from Mbed TLS. The only relevant fuzzers are the
privkey and pubkey fuzzers, but non-trivial work would be required to
integrate those into Mbed Crypto (more than is comfortable in a merge
commit).
- Reject addition of Docker wrappers for compat.sh and ssl-opt.sh, as
those are not present in Mbed Crypto.
- Remove calls to SSL-related scripts from basic-in-docker.sh
Fix test errors by performing the following:
- Avoid using a link that Doxygen can't seem to resolve in Mbed Crypto,
but can resolve in Mbed TLS. In documentation for
MBEDTLS_CHECK_PARAMS, don't attempt to link to MBEDTLS_PARAM_FAILED.
* origin/development: (339 commits)
Do not build fuzz on windows
No booleans and import config
Removing space before opening parenthesis
Style corrections
Syntax fix
Fixes warnings from MSVC
Add a linker flag to enable gcov in basic-build-test.sh
Update crypto submodule to a revision with the HAVEGE header changes
Test with MBEDTLS_ECP_RESTARTABLE
Allow TODO in code
Use the docstring in the command line help
Split _abi_compliance_command into smaller functions
Record the commits that were compared
Document how to build the typical argument for -s
Allow running /somewhere/else/path/to/abi_check.py
tests: Limit each log to 10 GiB
Warn if VLAs are used
Remove redundant compiler flag
Consistently spell -Wextra
Fix parsing issue when int parameter is in base 16
...
65528 bits is more than any reasonable key until we start supporting
post-quantum cryptography.
This limit is chosen to allow bit-sizes to be stored in 16 bits, with
65535 left to indicate an invalid value. It's a whole number of bytes,
which facilitates some calculations, in particular allowing a key of
exactly PSA_CRYPTO_MAX_STORAGE_SIZE to be created but not one bit
more.
As a resource usage limit, this is arguably too large, but that's out
of scope of the current commit.
Test that key import, generation and derivation reject overly large
sizes.
Move the "core attributes" to a substructure of psa_key_attribute_t.
The motivation is to be able to use the new structure
psa_core_key_attributes_t internally.
Add a few test cases to ensure that alg=0 in policy does not allow
using the key for an operation.
Add a test case to ensure that ANY_HASH does not have a wildcard
meaning for HMAC.
Add a parameter to the key import method of a secure element driver to
make it report the key size in bits. This is necessary (otherwise the
core has no idea what the bit-size is), and making import report it is
easier than adding a separate method (for other key creation methods,
this information is an input, not an output).
Run all functions that take a key handle as input with a key that is
in a secure element. All calls are expected to error out one way or
another (not permitted by policy, invalid key type, method not
implemented in the secure element, ...). The goal of this test is to
ensure that nothing bad happens (e.g. invalid pointer dereference).
Run with various key types and algorithms to get good coverage.
The following provides more information on this PR:
- PSA stands for Platform Security Architecture.
- Add support for use of psa_trusted_storage_api internal_trusted_storage.h v1.0.0
as the interface to the psa_trusted_storage_linux backend (i.e. for persistent
storage when MBEDTLS_PSA_ITS_FILE_C is not defined). This requires changes
to psa_crypto_its.h and psa_crypto_storage.c to migrate to the new API.
Stored keys must contain lifetime information. The lifetime used to be
implied by the location of the key, back when applications supplied
the lifetime value when opening the key. Now that all keys' metadata
are stored in a central location, this location needs to store the
lifetime explicitly.
Pass information via a key attribute structure rather than as separate
parameters to psa_crypto_storage functions. This makes it easier to
maintain the code when the metadata of a key evolves.
This has negligible impact on code size (+4B with "gcc -Os" on x86_64).
This test case was only executed if the SHA-512 module was enabled and
MBEDTLS_ENTROPY_FORCE_SHA256 was not enabled, so "config.pl full"
didn't have a chance to reach it even if that enabled
MBEDTLS_PLATFORM_NV_SEED_ALT.
Now all it takes to enable this test is MBEDTLS_PLATFORM_NV_SEED_ALT
and its requirements, and the near-ubiquitous MD module.
Call mbedtls_entropy_free on test failure.
Restore the previous NV seed functions which the call to
mbedtls_platform_set_nv_seed() changed. This didn't break anything,
but only because the NV seed functions used for these tests happened
to work for the tests that got executed later in the .data file.
memset has undefined behavior when either pointer can be NULL, which
is the case when it's the result of malloc/calloc with a size of 0.
The memset calls here are useless anyway since they come immediately
after calloc.
Make some functions non-static, to avoid Wunused function warnings. Make
a function scoped variable block scoped instead, to avoid Wunused
variable warnings in some configurations.
* origin/pr/2660:
Fix parsing issue when int parameter is in base 16
Refactor receive_uint32()
Refactor get_byte function
Make the script portable to both pythons
Update the test encoding to support python3
update the test script
Secure element support has its own source file, and in addition
requires many hooks in other files. This is a nontrivial amount of
code, so make it optional (but default on).
This change affects the psa_key_derivation_s structure. With the buffer
removed from the union, it is empty if MBEDTLS_MD_C is not defined.
We can avoid undefined behaviour by adding a new dummy field that is
always present or make the whole union conditional on MBEDTLS_MD_C.
In this latter case the initialiser macro has to depend on MBEDTLS_MD_C
as well. Furthermore the first structure would be either
psa_hkdf_key_derivation_t or psa_tls12_prf_key_derivation_t both of
which are very deep and would make the initialisation macro difficult
to maintain, therefore we go with the first option.
Part of the tests are adapted in this commit, another part is already
covered by the derive_input tests and some of them are not applicable to
the new API (the new API does not request capacity at the setup stage).
The test coverage temporarily drops with this commit, the two test cases
conserning capacity will be re-added in a later commit.
In the 1.0 API some functionality has been split from the
psa_key_derivation_setup() function and is now done with the
psa_key_derivation_input_*() functions. The new tests maintain the
existing test coverage of this functionality.
Add the compile time option PSA_PRE_1_0_KEY_DERIVATION. If this is not
turned on, then the function `psa_key_derivation()` is removed.
Most of the tests regarding key derivation haven't been adapted to the
new API yet and some of them have only been adapted partially. When this
new option is turned off, the tests using the old API and test cases
using the old API of partially adapted tests are skipped.
The sole purpose of this option is to make the transition to the new API
smoother. Once the transition is complete it can and should be removed
along with the old API and its implementation.
Call `greentea_getc()` 8 times, and then `unhexify` once, instead of
calling `receive_byte()`, which inside calls `greentea_getc()` twice,
for every hex digit.
Since Python3 handles encoding differently than Python2,
a change in the way the data is encoded and sent to the target is needed.
1. Change the test data to be sent as hex string
2. Convert the characters to binary bytes.
This is done because the mbed tools translate the encoding differently
(mbed-greentea, and mbed-htrunner)
* origin/pr/2697:
Update crypto submodule
Add all.sh component that exercises invalid_param checks
Remove mbedtls_param_failed from programs
Make it easier to define MBEDTLS_PARAM_FAILED as assert
Make test suites compatible with #include <assert.h>
Pass -m32 to the linker as well
Don't systematically rebuild programs
* origin/pr/2053:
Clarify ChangeLog entry for fix to #1628
Add Changelog entry for clang test-ref-configs.pl fix
Enable more compiler warnings in tests/Makefile
Change file scoping of test helpers.function
Create a new header file psa_helpers.h and put the one helper macro
that isn't specific to PSA crypto there. Use this header file in the
ITS test suite.
This file isn't like the other .function files: it isn't concatenated
by a separate preprocessing script, but included via C preprocessing.
Rename this file to .h. This isn't a normal C header, because it
defines auxiliary functions. But the functions aren't big and we only
have one compilation unit per executable, so this is good enough for
what we're doing.
* origin/pr/2443: (25 commits)
Fix documentation of X.509 parsing test
Add X.509 CRT parsing test for mixed time-encodings
Improve X.509 CRT parsing test names
Add negative X.509 parsing tests for v3Ext in v1/v2 CRT
Add negative X.509 parsing tests for IssuerID/SubjectID in v1 CRT
Improve name of X.509 CRT parsing test
Always use the same X.509 alg structure inside and outside of TBS
Fix test dependencies in X.509 CRT parsing suite
Fix non-DER length encoding in two X.509 CRT parsing tests
Fix test case name formatting in X.509 parsing suite
Use ASN.1 NULL TLVs when testing invalid tags
Shorten X.509 CRT parsing test names
Extend negative testing for X.509 Signature parsing
Extend negative testing for X.509 SignatureAlgorithm parsing
Extend negative testing for X.509 v3 Extension parsing
Extend negative testing for X.509 SubjectID parsing
Extend negative testing for X.509 IssuerID parsing
Extend negative testing for X.509 SubjectPublicKeyInfo parsing
Extend negative testing for X.509 Subject parsing
Extend negative testing for X.509 Validity parsing
...
* origin/pr/2430:
Document support for MD2 and MD4 in programs/x509/cert_write
Correct name of X.509 parsing test for well-formed, ill-signed CRT
Add test cases exercising successful verification of MD2/MD4/MD5 CRT
Add test case exercising verification of valid MD2 CRT
Add MD[245] test CRTs to tree
Add instructions for MD[245] test CRTs to tests/data_files/Makefile
Add suppport for MD2 to CSR and CRT writing example programs
Remove use of MD2 in further x509parse tests
Convert further x509parse tests to use lower-case hex data
Correct placement of ChangeLog entry
Adapt ChangeLog
Use SHA-256 instead of MD2 in X.509 CRT parsing tests
Consistently use lower case hex data in X.509 parsing tests
* origin/pr/2260:
Update crypto submodule
Remove heading spaces in tests/data_files/Makefile
Re-generate library/certs.c from script
Add new line at the end of test-ca2.key.enc
Use strict syntax to annotate origin of test data in certs.c
Add run to all.sh exercising !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO
Allow DHM self test to run without MBEDTLS_PEM_PARSE_C
ssl-opt.sh: Auto-skip tests that use files if MBEDTLS_FS_IO unset
Document origin of hardcoded certificates in library/certs.c
Adapt ChangeLog
Rename server1.der to server1.crt.der
Add DER encoded files to git tree
Add build instructions to generate DER versions of CRTs and keys
Document "none" value for ca_path/ca_file in ssl_client2/ssl_server2
ssl_server2: Skip CA setup if `ca_path` or `ca_file` argument "none"
ssl_client2: Skip CA setup if `ca_path` or `ca_file` argument "none"
Correct white spaces in ssl_server2 and ssl_client2
Adapt ssl_client2 to parse DER encoded test CRTs if PEM is disabled
Adapt ssl_server2 to parse DER encoded test CRTs if PEM is disabled
Don't use the macro name assert. It's technically permitted as long as
<assert.h> is not included, but it's fragile, because it means the
code and any header that it includes must not include <assert.h>.
Don't use the macro name assert. It's technically permitted as long as
<assert.h> is not included, but it's fragile, because it means the
code and any header that it includes must not include <assert.h>.
Increase the SO versions of libmbedx509 and libmbedtls due to the
addition of fields in publicly visible (non-opaque) structs:
- mbedtls_ssl_config
- mbedtls_ssl_context
- mbedtls_x509_crt
Remove the "Decrypt empty buffer" test, as ChaCha20 is a stream cipher
and 0 bytes encrypted is identical to a 0 length buffer. The "ChaCha20
Encrypt and decrypt 0 bytes" test will test decryption of a 0 length
buffer.
Previously, even in the Chacha20 and Chacha20-Poly1305 tests, we would
test that decryption of an empty buffer would work with
MBEDTLS_CIPHER_AES_128_CBC.
Make the cipher used with the dec_empty_buf() test configurable, so that
Chacha20 and Chacha20-Poly1305 empty buffer tests can use ciphers other
than AES CBC. Then, make the Chacha20 and Chacha20-Poly1305 empty buffer
tests use the MBEDTLS_CIPHER_CHACHA20 and
MBEDTLS_CIPHER_CHACHA20_POLY1305 cipher suites.
Remove the "Decrypt empty buffer" test, as ChaCha20 is a stream cipher
and 0 bytes encrypted is identical to a 0 length buffer. The "ChaCha20
Encrypt and decrypt 0 bytes" test will test decryption of a 0 length
buffer.
Previously, even in the Chacha20 and Chacha20-Poly1305 tests, we would
test that decryption of an empty buffer would work with
MBEDTLS_CIPHER_AES_128_CBC.
Make the cipher used with the dec_empty_buf() test configurable, so that
Chacha20 and Chacha20-Poly1305 empty buffer tests can use ciphers other
than AES CBC. Then, make the Chacha20 and Chacha20-Poly1305 empty buffer
tests use the MBEDTLS_CIPHER_CHACHA20 and
MBEDTLS_CIPHER_CHACHA20_POLY1305 cipher suites.
Replace all calls to mbedtls_psa_crypto_free in tests by PSA_DONE.
This is correct for most tests, because most tests close open keys. A
few tests now fail; these tests need to be reviewed and switched back
to mbedtls_psa_crypto_free if they genuinely expected to end with some
slots still in use.
Create a specific file for helper functions that are related to the
PSA API. The reason for a separate file is so that it can include
<psa/crypto.h>, without forcing this header inclusion into every test
suite. In this commit, psa_helpers.function doesn't need psa/crypto.h
yet, but this will be the case in a subsequent commit.
Move PSA_ASSERT to psa_helpers.function, since that's the sort of
things it's for.
Include "psa_helpers.function" from the PSA crypto tests.
In the ITS test, don't include "psa_helpers". The ITS tests are
meant to stand alone from the rest of the library.
When MBEDTLS_SSL_ENCRYPT_THEN_MAC is enabled, but not
MBEDTLS_SSL_SOME_MODES_USE_MAC, mbedtls_ssl_derive_keys() and
build_transforms() will attempt to use a non-existent `encrypt_then_mac`
field in the ssl_transform.
Compile [ 93.7%]: ssl_tls.c
[Error] ssl_tls.c@865,14: 'mbedtls_ssl_transform {aka struct mbedtls_ssl_transform}' ha
s no member named 'encrypt_then_mac'
[ERROR] ./mbed-os/features/mbedtls/src/ssl_tls.c: In function 'mbedtls_ssl_derive_keys'
:
./mbed-os/features/mbedtls/src/ssl_tls.c:865:14: error: 'mbedtls_ssl_transform {aka str
uct mbedtls_ssl_transform}' has no member named 'encrypt_then_mac'
transform->encrypt_then_mac = session->encrypt_then_mac;
^~
Change mbedtls_ssl_derive_keys() and build_transforms() to only access
`encrypt_then_mac` if `encrypt_then_mac` is actually present.
Add a regression test to detect when we have regressions with
configurations that do not include any MAC ciphersuites.
Fixes d56ed2491b ("Reduce size of `ssl_transform` if no MAC ciphersuite is enabled")
Lengths below 128 Bytes must be encoded as a single 'XX' byte in DER,
but two tests in the X.509 CRT parsing suite used the BER but non-DER
encoding '81 XX' (the first byte 10000001 indicating that the length
is to follow (high bit) and has length 1 byte (low bit)).
Previously, a test exercising the X.509 CRT parser's behaviour
on unexpected tags would use a '00' byte in place of the tag
for the expected structure. This makes reviewing the examples
harder because the binary data isn't valid DER-encoded ASN.1.
This commit uses the ASN.1 NULL TLV '05 00' to test invalid
tags, and adapts surrounding structures' length values accordingly.
This eases reviewing because now the ASN.1 structures are still
well-formed at the place where the mismatch occurs.
Some functions within the X.509 module return an ASN.1 low level
error code where instead this error code should be wrapped by a
high-level X.509 error code as in the bulk of the module.
Specifically, the following functions are affected:
- mbedtls_x509_get_ext()
- x509_get_version()
- x509_get_uid()
This commit modifies these functions to always return an
X.509 high level error code.
Care has to be taken when adapting `mbetls_x509_get_ext()`:
Currently, the callers `mbedtls_x509_crt_ext()` treat the
return code `MBEDTLS_ERR_ASN1_UNEXPECTED_TAG` specially to
gracefully detect and continue if the extension structure is not
present. Wrapping the ASN.1 error with
`MBEDTLS_ERR_X509_INVALID_EXTENSIONS` and adapting the check
accordingly would mean that an unexpected tag somewhere
down the extension parsing would be ignored by the caller.
The way out of this is the following: Luckily, the extension
structure is always the last field in the surrounding structure,
so if there is some data remaining, it must be an Extension
structure, so we don't need to deal with a tag mismatch gracefully
in the first place.
We may therefore wrap the return code from the initial call to
`mbedtls_asn1_get_tag()` in `mbedtls_x509_get_ext()` by
`MBEDTLS_ERR_X509_INVALID_EXTENSIONS` and simply remove
the special treatment of `MBEDTLS_ERR_ASN1_UNEXPECTED_TAG`
in the callers `x509_crl_get_ext()` and `x509_crt_get_ext()`.
This renders `mbedtls_x509_get_ext()` unsuitable if it ever
happened that an Extension structure is optional and does not
occur at the end of its surrounding structure, but for CRTs
and CRLs, it's fine.
The following tests need to be adapted:
- "TBSCertificate v3, issuerID wrong tag"
The issuerID is optional, so if we look for its presence
but find a different tag, we silently continue and try
parsing the subjectID, and then the extensions. The tag '00'
used in this test doesn't match either of these, and the
previous code would hence return LENGTH_MISMATCH after
unsucessfully trying issuerID, subjectID and Extensions.
With the new code, any data remaining after issuerID and
subjectID _must_ be Extension data, so we fail with
UNEXPECTED_TAG when trying to parse the Extension data.
- "TBSCertificate v3, UIDs, invalid length"
The test hardcodes the expectation of
MBEDTLS_ERR_ASN1_INVALID_LENGTH, which needs to be
wrapped in MBEDTLS_ERR_X509_INVALID_FORMAT now.
Fixes#2431.
When parsing a substructure of an ASN.1 structure, no field within
the substructure must exceed the bounds of the substructure.
Concretely, the `end` pointer passed to the ASN.1 parsing routines
must be updated to point to the end of the substructure while parsing
the latter.
This was previously not the case for the routines
- x509_get_attr_type_and_value(),
- mbedtls_x509_get_crt_ext(),
- mbedtls_x509_get_crl_ext().
These functions kept using the end of the parent structure as the
`end` pointer and would hence allow substructure fields to cross
the substructure boundary. This could lead to successful parsing
of ill-formed X.509 CRTs.
This commit fixes this.
Care has to be taken when adapting `mbedtls_x509_get_crt_ext()`
and `mbedtls_x509_get_crl_ext()`, as the underlying function
`mbedtls_x509_get_ext()` returns `0` if no extensions are present
but doesn't set the variable which holds the bounds of the Extensions
structure in case the latter is present. This commit addresses
this by returning early from `mbedtls_x509_get_crt_ext()` and
`mbedtls_x509_get_crl_ext()` if parsing has reached the end of
the input buffer.
The following X.509 parsing tests need to be adapted:
- "TBSCertificate, issuer two inner set datas"
This test exercises the X.509 CRT parser with a Subject name
which has two empty `AttributeTypeAndValue` structures.
This is supposed to fail with `MBEDTLS_ERR_ASN1_OUT_OF_DATA`
because the parser should attempt to parse the first structure
and fail because of a lack of data. Previously, it failed to
obey the (0-length) bounds of the first AttributeTypeAndValue
structure and would try to interpret the beginning of the second
AttributeTypeAndValue structure as the first field of the first
AttributeTypeAndValue structure, returning an UNEXPECTED_TAG error.
- "TBSCertificate, issuer, no full following string"
This test exercises the parser's behaviour on an AttributeTypeAndValue
structure which contains more data than expected; it should therefore
fail with MBEDTLS_ERR_ASN1_LENGTH_MISMATCH. Because of the missing bounds
check, it previously failed with UNEXPECTED_TAG because it interpreted
the remaining byte in the first AttributeTypeAndValue structure as the
first byte in the second AttributeTypeAndValue structure.
- "SubjectAltName repeated"
This test should exercise two SubjectAltNames extensions in succession,
but a wrong length values makes the second SubjectAltNames extension appear
outside of the Extensions structure. With the new bounds in place, this
therefore fails with a LENGTH_MISMATCH error. This commit adapts the test
data to put the 2nd SubjectAltNames extension inside the Extensions
structure, too.
Part of the record encryption/decryption tests is to gradually
increase the space available at the front and/or at the back of
a record and observe when encryption starts to succeed. If exactly
one of the two parameters is varied at a time, the expectation is
that encryption will continue to succeed once it has started
succeeding (that's not true if both pre- and post-space are varied
at the same time).
Moreover, previously the test would take turns when choosing which
transform should be used for encryption, and which for decryption.
With the introduction of the CID feaature, this switching of transforms
doesn't align with the expectation of eventual success of the encryption,
since the overhead of encryption might be different for the parties,
because both parties may use different CIDs for their outgoing records.
This commit modifies the tests to not take turns between transforms,
but to always use the same transforms for encryption and decryption
during a single round of the test.
The X.509 parsing test suite test_suite_x509parse contains a test
exercising X.509 verification for a valid MD4/MD5 certificate in a
profile which doesn't allow MD4/MD5. This commit adds an analogous
test for MD2.
- Replace 'RSA with MD2' OID '2a864886f70d010102' by
'RSA with SHA-256' OID '2a864886f70d01010b':
Only the last byte determines the hash, and
`MBEDTLS_OID_PKCS1_MD2 == MBEDTLS_OID_PKCS1 "\x02"`
`MBEDTLS_OID_PKCS1_SHA256 == MBEDTLS_OID_PKCS1 "\x0b"`
See oid.h.
- Replace MD2 dependency by SHA256 dependency.
- Adapt expected CRT info output.
Conflicts:
* library/ssl_cli.c, library/ssl_tls.c:
Removed on the development branch. Keep them removed.
* include/psa/crypto_extra.h, library/psa_crypto_storage.c,
tests/suites/test_suite_psa_crypto.data,
tests/suites/test_suite_psa_crypto.function,
tests/suites/test_suite_psa_crypto_persistent_key.data,
tests/suites/test_suite_psa_crypto_slot_management.data,
tests/suites/test_suite_psa_crypto_slot_management.function:
Modified on the development branch only to implement the enrollment
algorithm, which has been reimplemented on the API branch.
Keep the API branch.
Add parameters to psa_copy_key tests for the enrollment algorithm (alg2).
This commit only tests with alg2=0, which is equivalent to not setting
an enrollment algorithm.
Manually cherry-picked from ca5bed742f
by taking that patch, replacing KEYPAIR by KEY_PAIR
throughout (renaming applied in this branch), and discarding parts
about import_twice in test_suite_psa_crypto (this test function was
removed from this branch).
Add parameters to psa_copy_key tests for the enrollment algorithm (alg2).
This commit only tests with alg2=0, which is equivalent to not setting
an enrollment algorithm.
When importing a private elliptic curve key, require the input to have
exactly the right size. RFC 5915 requires the right size (you aren't
allowed to omit leading zeros). A different buffer size likely means
that something is wrong, e.g. a mismatch between the declared key type
and the actual data.
Resolve conflicts by performing the following operations:
- Reject changes to files removed during the creation of Mbed Crypto
from Mbed TLS.
- Reject the addition of certificates that would not be used by any
tests, including rejecting the addition of Makefile rules to
generate these certificates.
- Reject changes to error.c referencing modules that are not part of
Mbed Crypto.
* origin/development: (80 commits)
Style fix
Fix test data
Update test data
Add some negative test cases
Fix minor issues
Add ChangeLog entry about listing all SAN
Remove unneeded whitespaces
Fix mingw CI failures
Initialize psa_crypto in ssl test
Check that SAN is not malformed when parsing
Documentation fixes
Fix ChangeLog entry
Fix missing tls version test failures
Fix typo
Fix ChangeLog entry location
Add changeLog entry
Add test for export keys functionality
Add function to retrieve the tls_prf type
Add tests for the public tls_prf API
Add public API for tls_prf
...
* origin/pr/2530: (27 commits)
Style fix
Fix test data
Update test data
Add some negative test cases
Fix minor issues
Add ChangeLog entry about listing all SAN
Check that SAN is not malformed when parsing
Documentation fixes
Fix ChangeLog entry
Fail in case critical crt policy not supported
Update SAN parsing documentation
change the type of hardware_module_name member
Change mbedtls_x509_subject_alternative_name
Add length checking in certificate policy parsing
Rephrase x509_crt extension member description
Rephrase changeLog entries
Remove redundant memset()
Propogate error when parsing SubjectAltNames
Tidy up style in x509_info_subject_alt_name
Print unparseable SubjectAlternativeNames
...
* origin/pr/2538:
Remove unneeded whitespaces
Fix mingw CI failures
Initialize psa_crypto in ssl test
Fix missing tls version test failures
Fix typo
Fix ChangeLog entry location
Add changeLog entry
Add test for export keys functionality
Add function to retrieve the tls_prf type
Add tests for the public tls_prf API
Add public API for tls_prf
Add eap-tls key derivation in the examples.
Add ChangeLog entry
Add an extra key export function
Have the temporary buffer allocated dynamically
Zeroize secret data in the exit point
Add a single exit point in key derivation function
generate_key is a more classical name. The longer name was only
introduced to avoid confusion with getting a key from a generator,
which is key derivation, but we no longer use the generator
terminology so this reason no longer applies.
perl -i -pe 's/psa_generate_random_key/psa_generate_key/g' $(git ls-files)
Parametrize finite-field Diffie-Hellman key types with a DH group
identifier, in the same way elliptic curve keys are parametrized with
an EC curve identifier.
Define the DH groups from the TLS registry (these are the groups from
RFC 7919).
Replicate the macro definitions and the metadata tests from elliptic
curve identifiers to DH group identifiers.
Define PSA_DH_GROUP_CUSTOM as an implementation-specific extension for
which domain parameters are used to specify the group.
Generators are mostly about key derivation (currently: only about key
derivation). "Generator" is not a commonly used term in cryptography.
So favor "derivation" as terminology. Call a generator a key
derivation operation structure, since it behaves like other multipart
operation structures. Furthermore, the function names are not fully
consistent.
In this commit, I rename the functions to consistently have the prefix
"psa_key_derivation_". I used the following command:
perl -i -pe '%t = (
psa_crypto_generator_t => "psa_key_derivation_operation_t",
psa_crypto_generator_init => "psa_key_derivation_init",
psa_key_derivation_setup => "psa_key_derivation_setup",
psa_key_derivation_input_key => "psa_key_derivation_input_key",
psa_key_derivation_input_bytes => "psa_key_derivation_input_bytes",
psa_key_agreement => "psa_key_derivation_key_agreement",
psa_set_generator_capacity => "psa_key_derivation_set_capacity",
psa_get_generator_capacity => "psa_key_derivation_get_capacity",
psa_generator_read => "psa_key_derivation_output_bytes",
psa_generate_derived_key => "psa_key_derivation_output_key",
psa_generator_abort => "psa_key_derivation_abort",
PSA_CRYPTO_GENERATOR_INIT => "PSA_KEY_DERIVATION_OPERATION_INIT",
PSA_GENERATOR_UNBRIDLED_CAPACITY => "PSA_KEY_DERIVATION_UNLIMITED_CAPACITY",
); s/\b(@{[join("|", keys %t)]})\b/$t{$1}/ge' $(git ls-files)
When importing a private elliptic curve key, require the input to have
exactly the right size. RFC 5915 requires the right size (you aren't
allow to omit leading zeros). A different buffer size likely means
that something is wrong, e.g. a mismatch between the declared key type
and the actual data.
In psa_import_key, change the order of parameters to pass
the pointer where the newly created handle will be stored last.
This is consistent with most other library functions that put inputs
before outputs.
In psa_generate_derived_key, change the order of parameters to pass
the pointer where the newly created handle will be stored last.
This is consistent with most other library functions that put inputs
before outputs.
psa_set_key_lifetime and psa_set_key_id aren't pure setters: they also
set the other attribute in some conditions. Add dedicated tests for
this behavior.
