Previously it was disabled as too experimental, which no longer holds. Also,
this option introduces new APIs, so it's not only about an internal
alternative (as the comment in config.pl used to state) - people who request a
full config should get all of the available APIs.
Adapt all.sh: now all builds with full config will also test this option, and
builds with the default config will test without it. Just to be sure, let's
have a build with full config minus this option.
Update documentation of MBEDTLS_USE_PSA_CRYPTO to reflect the status of the
new APIs it enables in Mbed TLS and why they're still opt-in.
Also enable it in scripts/config.pl full, as well as two storage options that
were only blacklisted from full config because they depended on
MBEDTLS_PSA_CRYPTO_C.
Adapt tests in all.sh:
- tests with submodule enabled (default) no longer need to enable it
explicitly, and no longer need runtime tests, as those are now handled by
all other test cases in this script
- tests with submodule disabled (old default) now need to disable it
explicitly, and execute some runtime tests, as those are no longer tested
anywhere else in this script
Adapt documentation in Readme: remove the section "building with submodule"
and replace it with a new section before the other building sections.
Purposefully don't document how to build not from the submodule, as that
option is going away soon.
Resolve merge conflicts by performing the following actions:
- Reject changes to deleted files.
- Reject changes to generate_errors.pl and generate_visualc_files.pl.
Don't add an 'include-crypto' option which would attempt to use the
non-existent crypto submodule.
- list-identifiers.sh had the `--internal` option added to it, which
lists identifiers only in internal headers. Add PSA-specific internal
headers to list-identifiers.sh.
* origin/development: (40 commits)
Document the scripts behaviour further
Use check_output instead of Popen
all.sh: Require i686-w64-mingw32-gcc version >= 6
generate_visualc_files.pl: add mbedtls source shadowing by crypto
generate_errors.pl: refactor and simplify the code
Start unused variable with underscore
Correct documentation
generate_errors.pl: typo fix
revert changes to generate_features.pl and generate_query_config.pl
Check that the report directory is a directory
Use namespaces instead of full classes
Fix pylint issues
Don't put abi dumps in subfolders
Add verbose switch to silence all output except the final report
Fetch the remote crypto branch, rather than cloning it
Prefix internal functions with underscore
Add RepoVersion class to make handling of many arguments easier
Reduce indentation levels
Improve documentation
Use optional arguments for setting repositories
...
Remove TLS and NET options from config files and scripts.
Note that this fails check-names.sh because options that TLS and NET
files use are no longer present in config.h.
Merge Mbed TLS at f790a6cbee into Mbed Crypto.
Resolve conflicts by performing the following:
- Reject changes to README.md
- Don't add crypto as a submodule
- Remove test/ssl_cert_test from programs/Makefile
- Add cipher.nist_kw test to tests/CMakeLists.txt
- Reject removal of crypto-specific all.sh tests
- Reject update to SSL-specific portion of component_test_valgrind
in all.sh
- Reject addition of ssl-opt.sh testing to component_test_m32_o1 in
all.sh
* tls/development: (87 commits)
Call mbedtls_cipher_free() to reset a cipher context
Don't call mbedtls_cipher_setkey twice
Update crypto submodule
Minor fixes in get certificate policies oid test
Add certificate policy oid x509 extension
cpp_dummy_build: Add missing header psa_util.h
Clarify comment mangled by an earlier refactoring
Add an "out-of-box" component
Run ssl-opt.sh on 32-bit runtime
Don't use debug level 1 for informational messages
Skip uncritical unsupported extensions
Give credit to OSS-Fuzz for #2404
all.sh: remove component_test_new_ecdh_context
Remove crypto-only related components from all.sh
Remove ssl_cert_test sample app
Make CRT callback tests more robust
Rename constant in client2.c
Document and test flags in x509_verify
Fix style issues and a typo
Fix a rebase error
...
Run ssl-opt.sh on x86_32 with ASan. This may detect bugs that only
show up on 32-bit platforms, for example due to size_t overflow.
For this component, turn off some memory management features that are
not useful, potentially slow, and may reduce ASan's effectiveness at
catching buffer overflows.
* origin/pr/2464:
Allow main() to lack a docstring.
Silence pylint
check-files.py: readability improvement in permission check
check-files.py: use class fields for class-wide constants
check-files.py: clean up class structure
abi_check.py: Document more methods
check-files.py: document some classes and methods
Fix pylint errors going uncaught
Call pylint3, not pylint
New, documented pylint configuration
Resolve conflicts actions:
- Reject path changes to config.h
- Reject submodule-related changes in build scripts (Makefile,
CMakeLists.txt)
- Add oid test suite to list of tests in tests/CMakeLists.txt,
rejecting any test filtering related changes (which TLS uses to avoid
duplicating crypto tests)
- Add legacy ECDH test to all.sh without including
all.sh tests that depend on SSL
Ensure this merge passes tests by auto-generating query_config.c, adding
MBEDTLS_ECDH_LEGACY_CONTEXT to it.
* restricted/pr/552:
Fix mbedtls_ecdh_get_params with new ECDH context
Test undefining MBEDTLS_ECDH_LEGACY_CONTEXT in all.sh
Define MBEDTLS_ECDH_LEGACY_CONTEXT in config.h
Add changelog entry for mbedtls_ecdh_get_params robustness
Fix ecdh_get_params with mismatching group
Add test case for ecdh_get_params with mismatching group
Add test case for ecdh_calc_secret
Fix typo in documentation
Now that we have ITS over files, we no longer need a direct backend
for key storage over files. Remove psa_crypto_storage_file and its
tests.
Switch MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C and MBEDTLS_PSA_ITS_FILE_C on
by default. This preserves functionality and test coverage in the
default configuration, but forgets any key previously stored using the
file backend.
* origin/development: (113 commits)
Update query_config.c
Fix failure in SSLv3 per-version suites test
Adjust DES exclude lists in test scripts
Clarify 3DES changes in ChangeLog
Fix documentation for 3DES removal
Exclude 3DES tests in test scripts
Fix wording of ChangeLog and 3DES_REMOVE docs
Reduce priority of 3DES ciphersuites
Fix unused variable warning in ssl_parse_certificate_coordinate()
Update the crypto submodule to a78c958
Fix ChangeLog entry to correct release version
Fix typo in x509write test data
Add ChangeLog entry for unused bits in bitstrings
Improve docs for named bitstrings and their usage
Add tests for (named) bitstring to suite_asn1write
Add new function mbedtls_asn1_write_named_bitstring()
Add missing compile time guard in ssl_client2
Update programs/ssl/query_config.c
ssl_client2: Reset peer CRT info string on reconnect
Add further debug statements on assertion failures
...
* public/pr/2421: (68 commits)
Fix unused variable warning in ssl_parse_certificate_coordinate()
Add missing compile time guard in ssl_client2
Update programs/ssl/query_config.c
ssl_client2: Reset peer CRT info string on reconnect
Add further debug statements on assertion failures
Fix typo in documentation of ssl_parse_certificate_chain()
Add debug output in case of assertion failure
Fix typo in SSL ticket documentation
Add config sanity check for !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
ssl_client2: Zeroize peer CRT info buffer when reconnecting
Reintroduce numerous ssl-opt.sh tests if !MBEDTLS_SSL_KEEP_PEER_CERT
ssl_client2: Extract peer CRT info from verification callback
Improve documentation of mbedtls_ssl_get_peer_cert()
Improve documentation of MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
Fix indentation of Doxygen comment in ssl_internal.h
Set peer CRT length only after successful allocation
Remove question in comment about verify flags on cli vs. server
Remove misleading and redundant guard around restartable ECC field
Add test for !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE to all.sh
Free peer CRT chain immediately after verifying it
...
Additional work done as part of merge:
- Run ./tests/scripts/check-generated-files.sh and check in the
resulting changes to programs/ssl/query_config.c
Make check-python-files.sh run pylint on all *.py files (in
directories where they are known to be present), rather than list
files explicitly.
Fix a bug whereby the return status of check-python-files.sh was only
based on the last file passing, i.e. errors in other files were
effectively ignored.
Make check-python-files.sh run pylint unconditionally. Since pylint3
is not critical, make all.sh to skip running check-python-files.sh if
pylint3 is not available.
Resolve conflicts by performing the following.
- Take the upstream Mbed TLS ChangeLog verbatim.
- Reject changes to Makefiles and CMake that are related to using Mbed
Crypto as a submodule. It doesn't make sense to use Mbed Crypto as a
submodule of itself.
- Reject README changes, as Mbed Crypto has its own, different README.
- Reject PSA-related changes to config.h. We don't want to disable the
availability of the PSA Crypto API by default in the Mbed Crypto
config.h.
- Don't inadvertently revert dead code removal in
mbedtls_cipher_write_tag() which was added in f2a7529403 ("Fix
double return statement in cipher.c")
- Where Mbed Crypto already had some MBEDTLS_USE_PSA_CRYPTO code (from
past companion PRs) take the latest version from Mbed TLS which
includes integration with MBEDTLS_CHECK_PARAMS.
- Update the version of the shared library files to match what's
currently present in Mbed TLS.
- Reject removal of testing with PSA from config full tests.
- Resolve conflicts in test tests/suites/helpers.function, where both
Mbed Crypto and Mbed TLS both added documentation for TEST_ASSERT.
Combine text from both documentation efforts.
- Reject adding a submodule of ourselves.
- Reject addition of submodule tests in all.sh.
- Reject addition of submodule to library path in
tests/scripts/run-test-suites.pl.
- Avoid using USE_CRYPTO_SUBMODULE=1 in
component_test_use_psa_crypto_full_cmake_asan() in all.sh.
When using PSA with MBEDTLS_ENTROPY_NV_SEED, some test suites
require the seed file for PSA initialization, which was normally generated
later, when entropy tests were run. This change creates an initial seedfile
in all.sh.
Set the CMake-observed variable `CTEST_OUTPUT_ON_FAILURE`, so that when
a "make test" run by CMake fails, verbose test output about the detail
of failure is available.
When all.sh invokes check_headers_in_cpp, a backup config.h exists. This
causes a stray difference vs cpp_dummy_build.cpp. Fix by only collecting
the *.h files in include/mbedtls.
Change-Id: Ifd415027e856858579a6699538f06fc49c793570
Additional changes to temporarily enable running tests:
ssl_srv.c and test_suite_ecdh use mbedtls_ecp_group_load instead of
mbedtls_ecdh_setup
test_suite_ctr_drbg uses mbedtls_ctr_drbg_update instead of
mbedtls_ctr_drbg_update_ret
Wildcard patterns now work with command line COMPONENT arguments
without --except as well as with. You can now run e.g.
`all.sh "check_*` to run all the sanity checks.
After backing up and restoring config.h, `git diff-files` may report
it as potentially-changed because it isn't sure whether the index is
up to date. Use `git diff` instead: it actually reads the file.
Only look for armcc if component_build_armcc is to be executed,
instead of requiring the option --no-armcc.
You can still pass --no-armcc, but it's no longer required when
listing components to run. With no list of components or an exclude
list on the command line, --no-armcc is equivalent to having
build_armcc in the exclude list.
Build the list of components to run in $RUN_COMPONENTS as part of
command line parsing. After parsing the command line, it no longer
matters how this list was built.
Extract the list of available components by looking for definitions of
functions called component_xxx. The previous code explicitly listed
all components in run_all_components, which opened the risk of
forgetting to list a component there.
Add a conditional execution facility: if a function support_xxx exists
and returns false then component_xxx is not executed (except when the
command line lists an explicit set of components to execute).
Wildcard patterns now work with command line COMPONENT arguments
without --except as well as with. You can now run e.g.
`all.sh "check_*` to run all the sanity checks.
After backing up and restoring config.h, `git diff-files` may report
it as potentially-changed because it isn't sure whether the index is
up to date. Use `git diff` instead: it actually reads the file.
Only look for armcc if component_build_armcc is to be executed,
instead of requiring the option --no-armcc.
You can still pass --no-armcc, but it's no longer required when
listing components to run. With no list of components or an exclude
list on the command line, --no-armcc is equivalent to having
build_armcc in the exclude list.
Build the list of components to run in $RUN_COMPONENTS as part of
command line parsing. After parsing the command line, it no longer
matters how this list was built.
Extract the list of available components by looking for definitions of
functions called component_xxx. The previous code explicitly listed
all components in run_all_components, which opened the risk of
forgetting to list a component there.
Add a conditional execution facility: if a function support_xxx exists
and returns false then component_xxx is not executed (except when the
command line lists an explicit set of components to execute).
MAKEFLAGS was set to -j if it was already set, instead of being set if
not previously set as intended. So now all.sh will do parallel builds
if invoked without MAKEFLAGS in the environment.
Don't bail out of all.sh if the OS isn't Linux. We only expect
everything to pass on a recent Linux x86_64, but it's useful to call
all.sh to run some components on any platform.
In all.sh, always run both MemorySanitizer and Valgrind. Valgrind is
slower than ASan and MSan but finds some things that they don't.
Run MSan unconditionally, not just on Linux/x86_64. MSan is supported
on some other OSes and CPUs these days.
Use `all.sh --except test_memsan` if you want to omit MSan because it
isn't supported on your platform. Use `all.sh --except test_memcheck`
if you want to omit Valgrind because it's too slow.
Make the test scripts more portable (tested on FreeBSD): don't insist
on GNU sed, and recognize amd64 as well as x86_64 for `uname -m`. The
`make` utility must still be GNU make.
Call `set disable-randomization off` only if it seems to be supported.
The goal is to neither get an error about disable-randomization not
being supported (e.g. on FreeBSD), nor get an error if it is supported
but fails (e.g. on Ubuntu).
Only fiddle with disable-randomization from all.sh, which cares
because it reports the failure of ASLR disabling as an error. If a
developer invokes the Gdb script manually, a warning about ASLR
doesn't matter.
Use `cmake -D CMAKE_BUILD_TYPE=Asan` rather than manually setting
`-fsanitize=address`. This lets cmake determine the necessary compiler
and linker flags.
With UNSAFE_BUILD on, force -Wno-error. This is necessary to build
with MBEDTLS_TEST_NULL_ENTROPY.
MAKEFLAGS was set to -j if it was already set, instead of being set if
not previously set as intended. So now all.sh will do parallel builds
if invoked without MAKEFLAGS in the environment.
Don't bail out of all.sh if the OS isn't Linux. We only expect
everything to pass on a recent Linux x86_64, but it's useful to call
all.sh to run some components on any platform.
In all.sh, always run both MemorySanitizer and Valgrind. Valgrind is
slower than ASan and MSan but finds some things that they don't.
Run MSan unconditionally, not just on Linux/x86_64. MSan is supported
on some other OSes and CPUs these days.
Use `all.sh --except test_memsan` if you want to omit MSan because it
isn't supported on your platform. Use `all.sh --except test_memcheck`
if you want to omit Valgrind because it's too slow.
Make the test scripts more portable (tested on FreeBSD): don't insist
on GNU sed, and recognize amd64 as well as x86_64 for `uname -m`. The
`make` utility must still be GNU make.
Call `set disable-randomization off` only if it seems to be supported.
The goal is to neither get an error about disable-randomization not
being supported (e.g. on FreeBSD), nor get an error if it is supported
but fails (e.g. on Ubuntu).
Only fiddle with disable-randomization from all.sh, which cares
because it reports the failure of ASLR disabling as an error. If a
developer invokes the Gdb script manually, a warning about ASLR
doesn't matter.
Use `cmake -D CMAKE_BUILD_TYPE=Asan` rather than manually setting
`-fsanitize=address`. This lets cmake determine the necessary compiler
and linker flags.
With UNSAFE_BUILD on, force -Wno-error. This is necessary to build
with MBEDTLS_TEST_NULL_ENTROPY.
Merge the work on all.sh that was done on mbedtls-2.14.0 with the
changes from mbedtls-2.14.0 to the current tip of mbed-crypto/development.
There is a merge conflict in test/scripts/all.sh, which is the only
file that was modified in the all.sh work branch. I resolved it by
taking the copy from the all.sh branch and applying the changes
between mbedtls-2.14.0 and mbedtls-2.16.0. As evidenced by
`git diff mbedtls-2.14.0 d668baebc5e1709f4118aba3802d9af0ee4e4d83`,
many of the commits in
`git log mbedtls-2.14.0 d668baebc5e1709f4118aba3802d9af0ee4e4d83`
cancelled each other or were redundant with parallel commits that had
also occured via another branch included in mbedtls-2.14.0, leaving
the following differences:
* Removal of one unimportant blank line.
* The changes from db2b8db715
"psa: Add storage implementation for files", to turn off
PSA storage when MBEDTLS_FS_IO is turned off, which I manually
replayed.
Merge the work on all.sh that was done on mbedtls-2.14.0 with the
changes from mbedtls-2.14.0 to mbedtls-2.16.0.
There is a merge conflict in test/scripts/all.sh, which is the only
file that was modified in the all.sh work branch. I resolved it by
taking the copy from the all.sh branch and applying the changes
between mbedtls-2.14.0 and mbedtls-2.16.0. These changes consisted of
two commits:
* "Add tests to all.sh for CHECK_PARAMS edge cases": adds two
test components which are reproduced here as
test_check_params_without_platform and component_test_check_params_silent.
* "tests: Backup config.h before modifying it": moot because the
component framework introduced in the all.sh branch backs up config.h
systematically.
In all.sh, always save config.h before running a component, instead of
doing it manually in each component that requires it (except when we
forget, which has happened). This would break a script that requires
config.h.bak not to exist, but we don't have any of those.
In all.sh, always save config.h before running a component, instead of
doing it manually in each component that requires it (except when we
forget, which has happened). This would break a script that requires
config.h.bak not to exist, but we don't have any of those.
Call cleanup from run_component instead of calling it from each
individual component function.
Clean up after each component rather than before. With the new
structure it makes more sense for each component to leave the place
clean. Run cleanup once at the beginning to start from a clean slate.
Move almost all the code of this script into functions. There is no
intended behavior change. The goal of this commit is to make
subsequent improvements easier to follow.
A very large number of lines have been reintended. To see what's going
on, ignore whitespace differences (e.g. diff -w).
I followed the following rules:
* Minimize the amount of code that gets moved.
* Don't change anything to what gets executed or displayed.
* Almost all the code must end up in a function.
* One function does one thing. For most of the code, that's from one
"cleanup" to the next.
* The test sequence functions (run_XXX) are independent.
The change mostly amounts to putting chunks of code into a function
and calling the functions in order. A few test runs are conditional;
in those cases the conditional is around the function call.
It's good to make a backup of config.h before modifying it, so that when
"cleanup" runs the next test has a clean default config.h to start from.
Fixes 840af0a9ae ("Add tests to all.sh for CHECK_PARAMS edge cases")
Add a test to ensure that when the crypto submodule is not used, the crypto
library is not created and that libmbedcrypto.a does not contain symbols
from files contained within the crypto submodule.
- Check that libmbedcrypto was not built at the top level.
- Check that we've built libmbedcrypto with the correct files. Build
libmbedcrypto with debug symbols and verify that files used are from the
crypto submodule.
- Check that config.h is handled properly. Enable a feature at the top
level that the crypto library submodule has disabled in its config.h, and
check that the library symboles indicate that the feature is present in
libmbedcrypto.
- Ensure basic functionality of the resulting build with a run of
`make test` and `ssl-opt.sh`.
all.sh's cleanup function would not entirely remove CMakeFiles due to a
missing -o in its fine command. Add a -o after prune, so that the find for
CMakeFiles can succeed.
Add new functions, psa_load_persistent_key(),
psa_free_persistent_key_data(), and psa_save_persistent_key(), for
managing persistent keys. These functions load to or save from our
internal representation of key slots. Serialization is a concern of the
storage backend implementation and doesn't abstraction-leak into the
lifetime management code.
An initial implementation for files is provided. Additional storage
backends can implement this interface for other storage types.
Mbed TLS version 2.14.0
Resolved conflicts in include/mbedtls/config.h,
tests/scripts/check-files.py, and yotta/create-module.sh by removing yotta.
Resolved conflicts in tests/.jenkins/Jenkinsfile by continuing to run
mbedtls-psa job.
This commit adds a test to tests/scripts/all.sh exercising an
ASan build of the default configuration with
MBEDTLS_PLATFORM_MEMORY enabled,
MBEDTLS_PLATFORM_CALLOC_MACRO set to std calloc
MBEDTLS_PLATFORM_FREE_MACRO set to std free
(This should functionally be indistinguishable from a default build)
Yotta is no longer supported by Mbed TLS, so has been removed. Specifically, the
following changes have been made:
* references to yotta have been removed from the main readme and build
instructions
* the yotta module directory and build script has been removed
* yotta has been removed from test scripts such as all.sh and check-names.sh
* yotta has been removed from other files that that referenced it such as the
doxyfile and the bn_mul.h header
* yotta specific configurations and references have been removed from config.h
This commit adds two builds to all.sh which use a value of
MBEDTLS_SSL_DTLS_MAX_BUFFERING that allows to run the
reordering tests in ssl-opt.sh introduced in the last commit.
Added an additional i386 test to all.sh, to allow one test with -O0 which
compiles out inline assembly, and one to test with -01 which includes the inline
assembly.
The i386 test builds were only building the default configuration and had
no address sanitisation. This commit expands the test configuration to the full
configuration in all.sh and builds with ASan for when the test suites are
executed.
When calling all.sh from a script and using "--keep-going", errors were
sometimes missed due to all.sh always returning 0 "success" return code.
Return 1 if there is any failure encountered during a "keep-going" run.
This is disabled by default since it requires OpenSSL >= 1.1.0 and the current
default version on the CI is 1.0.2. However, the CI also has 1.1.1-rc which
can be used for this.
* development: (182 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
This patch uses grep to search the GDB output for errors as there is
a bug in the tool that causes it to return 0 to the system even though
there was a problem in the script.
This patch also fixes the zeroize test to work with the --keep-going
option in all.sh.
* development: (97 commits)
Updated version number to 2.10.0 for release
Add a disabled CMAC define in the no-entropy configuration
Adapt the ARIA test cases for new ECB function
Fix file permissions for ssl.h
Add ChangeLog entry for PR#1651
Fix MicroBlaze register typo.
Fix typo in doc and copy missing warning
Fix edit mistake in cipher_wrap.c
Update CTR doc for the 64-bit block cipher
Update CTR doc for other 128-bit block ciphers
Slightly tune ARIA CTR documentation
Remove double declaration of mbedtls_ssl_list_ciphersuites
Update CTR documentation
Use zeroize function from new platform_util
Move to new header style for ALT implementations
Add ifdef for selftest in header file
Fix typo in comments
Use more appropriate type for local variable
Remove useless parameter from function
Wipe sensitive info from the stack
...
Motivation is similar to NO_UDBL_DIVISION.
The alternative implementation of 64-bit mult is straightforward and aims at
obvious correctness. Also, visual examination of the generate assembly show
that it's quite efficient with clang, armcc5 and arm-clang. However current
GCC generates fairly inefficient code for it.
I tried to rework the code in order to make GCC generate more efficient code.
Unfortunately the only way to do that is to get rid of 64-bit add and handle
the carry manually, but this causes other compilers to generate less efficient
code with branches, which is not acceptable from a side-channel point of view.
So let's keep the obvious code that works for most compilers and hope future
versions of GCC learn to manage registers in a sensible way in that context.
See https://bugs.launchpad.net/gcc-arm-embedded/+bug/1775263
* development: (504 commits)
Fix minor code style issues
Add the uodate to the soversion to the ChangeLog
Fix the ChangeLog for clarity, english and credit
Update version to 2.9.0
ecp: Fix binary compatibility with group ID
Changelog entry
Change accepted ciphersuite versions when parsing server hello
Remove preprocessor directives around platform_util.h include
Fix style for mbedtls_mpi_zeroize()
Improve mbedtls_platform_zeroize() docs
mbedtls_zeroize -> mbedtls_platform_zeroize in docs
Reword config.h docs for MBEDTLS_PLATFORM_ZEROIZE_ALT
Organize CMakeLists targets in alphabetical order
Organize output objs in alfabetical order in Makefile
Regenerate errors after ecp.h updates
Update ecp.h
Change variable bytes_written to header_bytes in record decompression
Update ecp.h
Update ecp.h
Update ecp.h
...
Conflict resolution:
* ChangeLog: put the new entry from my branch in the proper place.
* include/mbedtls/error.h: counted high-level module error codes again.
* include/mbedtls/ssl.h: picked different numeric codes for the
concurrently added errors; made the new error a full sentence per
current standards.
* library/error.c: ran scripts/generate_errors.pl.
* library/ssl_srv.c:
* ssl_prepare_server_key_exchange "DHE key exchanges": the conflict
was due to style corrections in development
(4cb1f4d49c) which I merged with
my refactoring.
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first case, variable declarations: merged line
by line:
* dig_signed_len: added in async
* signature_len: removed in async
* hashlen: type changed to size_t in development
* hash: size changed to MBEDTLS_MD_MAX_SIZE in async
* ret: added in async
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first cae comment: the conflict was due to style
corrections in development (4cb1f4d49c)
which I merged with my comment changes made as part of refactoring
the function.
* ssl_prepare_server_key_exchange "Compute the hash to be signed" if
`md_alg != MBEDTLS_MD_NONE`: conflict between
ebd652fe2d
"ssl_write_server_key_exchange: calculate hashlen explicitly" and
46f5a3e9b4 "Check return codes from
MD in ssl code". I took the code from commit
ca1d742904 made on top of development
which makes mbedtls_ssl_get_key_exchange_md_ssl_tls return the
hash length.
* programs/ssl/ssl_server2.c: multiple conflicts between the introduction
of MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and new auxiliary functions and
definitions for async support, and the introduction of idle().
* definitions before main: concurrent additions, kept both.
* main, just after `handshake:`: in the loop around
mbedtls_ssl_handshake(), merge the addition of support for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and SSL_ASYNC_INJECT_ERROR_CANCEL
with the addition of the idle() call.
* main, if `opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM`: take the
code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS.
* main, loop around mbedtls_ssl_read() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
* main, loop around mbedtls_ssl_write() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
The gdb script loads the programs/test/zeroize program and feeds it as
imput its own source code. Then sets a breakpoint just before the last
program's return code and checks that every element in memory was
zeroized. Otherwise it signals a failure and terminates.
The test was added to all.sh.
Conflict resolution:
* ChangeLog
* tests/data_files/Makefile: concurrent additions, order irrelevant
* tests/data_files/test-ca.opensslconf: concurrent additions, order irrelevant
* tests/scripts/all.sh: one comment change conflicted with a code
addition. In addition some of the additions in the
iotssl-1381-x509-verify-refactor-restricted branch need support for
keep-going mode, this will be added in a subsequent commit.
Only delete things that we expect to find, to avoid deleting other
things that people might have lying around in their build tree.
Explicitly skip .git to avoid e.g. accidentally matching a branch
name.
All options can now be overridden by a subsequent option, e.g.
"all.sh --foo --no-foo" is equivalent to "all.sh --no-foo". This
allows making wrapper scripts with default options and occasionally
overriding those options when running the wrapper script.
* development: (557 commits)
Add attribution for #1351 report
Adapt version_features.c
Note incompatibility of truncated HMAC extension in ChangeLog
Add LinkLibraryDependencies to VS2010 app template
Add ChangeLog entry for PR #1382
MD: Make deprecated functions not inline
Add ChangeLog entry for PR #1384
Have Visual Studio handle linking to mbedTLS.lib internally
Mention in ChangeLog that this fixes#1351
Add issue number to ChangeLog
Note in the changelog that this fixes an interoperability issue.
Style fix in ChangeLog
Add ChangeLog entries for PR #1168 and #1362
Add ChangeLog entry for PR #1165
ctr_drbg: Typo fix in the file description comment.
dhm: Fix typo in RFC 5114 constants
tests_suite_pkparse: new PKCS8-v2 keys with PRF != SHA1
data_files/pkcs8-v2: add keys generated with PRF != SHA1
tests/pkcs5/pbkdf2_hmac: extend array to accommodate longer results
tests/pkcs5/pbkdf2_hmac: add unit tests for additional SHA algorithms
...
Build with MBEDTLS_DEPRECATED_REMOVED and MBEDTLS_DEPRECATED_WARNING
separately.
Do these builds with `-O -Werror -Wall -Wextra` to catch a maximum of
issues while we're at it. Do one with gcc and one with clang for
variety. This caught an uninitialized variable warning in cmac.c that
builds without -O didn't catch.
Build with MBEDTLS_HAVE_INT32 and MBEDTLS_HAVE_INT64 on all
architectures, not just x86_64. These two modes should work on all
platforms (except embedded environments where 64-bit division is not
available).
Also run the unit tests.
Correct the description: this is not "N-bit compilation", but "N-bit
bignum limbs".
- Adapt the change in all.sh to the new keep-going mode
- Restore alphabetical order of configuration flags for
alternative implementations in config.h and rebuild
library/version_features.c
Compilation and test for the `MBEDTLS_RSA_NO_CRT` option were
previously guarded by a check for 64-bit systems, for which there
is no reason. This commit moves both outside of the guard.
Add --keep-going mode to all.sh. In this mode, if a test fails, keep
running the subsequent tests. If a build fails, skip any tests of this
build and move on to the next tests. Errors in infrastructure, such as
git or cmake runs, remain fatal. Print an error summary at the end of
the run, and return a nonzero code if there was any failure.
In known terminal types, use color to highlight errors.
On a fatal signal, interrupt the run and report the errors so far.
This commit adds a build with default config except
MBEDTLS_SSL_MAX_FRAGMENT_LENGTH to all.sh, as well as a run of the MFL-related
tests in ssl-opt.sh.
With cmake, CFLAGS has to be set when invoking cmake, not make (which totally
ignores the value of CFLAGS when it runs and only keeps the one from cmake).
Also, in that case the flags were either redundant (-Werror etc) or wrong
(-std=c99 -pedantic) as some parts of the library will not build with
-pedantic (see the other -pedantic tests, which are correct, for what needs to
be disabled).
The test for MBEDTLS_NO_UDBL_DIVISION wasn't preserving it's own config.h
for the next test.
Also added comments to ARM Compiler 6 tests to better explain them.
The test for MBEDTLS_NO_UDBL_DIVISION wasn't preserving it's own config.h
for the next test.
Also added comments to ARM Compiler 6 tests to better explain them.
The test for MBEDTLS_NO_UDBL_DIVISION wasn't preserving it's own config.h
for the next test.
Also added comments to ARM Compiler 6 tests to better explain them.
Fixes strict C99 builds in all.sh with glibc version >2.19 where platform support
wasn't being compiled in automatically.
Also fixes C99 syntax with armclang.
Pull Request #533 - Use MAKEFLAGS to pass args to make in all.sh
Modify the script at tests/scripts/all.sh to export the variable
MAKEFLAGS with -j if it was not set before. This should decrease the
total runtime of tests/scripts/all.sh by letting make run multiple jobs
in parallel. Also, add a check at the top of the script to cause a
failure if the environment is not Linux.w
Tighten up the test options in all.sh, test-ref-configs.pl and curves.pl
to ensure the builds are strict for all warnings, warnings are treated
as errors, and that wherever possible builds are strict to the C99
standard. (Note that builds that use the Unix sockets API cannot be).
The library/net.c and its corresponding include/mbedtls/net.h file are
renamed to library/net_sockets.c and include/mbedtls/net_sockets.h
respectively. This is to avoid naming collisions in projects which also
have files with the common name 'net'.
Modify the script at tests/scripts/all.sh to export the variable
MAKEFLAGS with -j if it was not set before. This should decrease the
total runtime of tests/scripts/all.sh by letting make run multiple jobs
in parallel. Also, add a check at the top of the script to cause a
failure if the environment is not Linux.
In the test script tests/scripts/all.sh the armcc build is a baremetal build
and doesn't use MBEDTLS_HAVE_TIME therefore the test configuration
MBEDTLS_PLATFORM_TIME_ALT which is dependent on it must be unset.
The test script tests/scripts/all.sh exits on first error, although it also
attempted to redirect error output from armcc and then output it after armcc
had completed. This never occurred because as soon as armcc failed the script
would end and the redirected output wouldn't be displayed.
This change removes that redirection.
* Add script to print build environment info.
The new script is also included in:
- all.sh
- basic-build-test.sh
* Tidy up environment reporting script.
Changes include:
- making the echo calls portable
- removing unnecessary brackets
- using more efficient checks for the existance of commands
- correcting typos and copyright year
* Update references to output_env.sh
MBEDTLS_ENTROPY_NV_SEED is dependent on platform code unless an
alternative implementation is provided, therefore needs to be disabled
in the disabled filesystem IO build.
