The previous prototype gave warnings are the strings produced by #cond and
__FILE__ are const, so we shouldn't implicitly cast them to non-const.
While at it modifying most example programs:
- include the header that has the function declaration, so that the definition
can be checked to match by the compiler
- fix whitespace
- make it work even if PLATFORM_C is not defined:
- CHECK_PARAMS is not documented as depending on PLATFORM_C and there is
no reason why it should
- so, remove the corresponding #if defined in each program...
- and add missing #defines for mbedtls_exit when needed
The result has been tested (make all test with -Werror) with the following
configurations:
- full with CHECK_PARAMS with PLATFORM_C
- full with CHECK_PARAMS without PLATFORM_C
- full without CHECK_PARAMS without PLATFORM_C
- full without CHECK_PARAMS with PLATFORM_C
Additionally, it has been manually tested that adding
mbedtls_aes_init( NULL );
near the normal call to mbedtls_aes_init() in programs/aes/aescrypt2.c has the
expected effect when running the program.
The sample programs require an additional handler function of
mbedtls_param_failed() to handle any failed parameter validation checks enabled
by the MBEDTLS_CHECK_PARAMS config.h option.
If `MBEDTLS_MEMORY_BUFFER_ALLOC_C` is configured and Mbed TLS'
custom buffer allocator is used for calloc() and free(), the
read buffer used by the server example application is allocated
from the buffer allocator, but freed after the buffer allocator
has been destroyed. If memory backtracing is enabled, this leaves
a memory leak in the backtracing structure allocated for the buffer,
as found by valgrind.
Fixes#2069.
This setting belongs to the individual connection, not to a configuration
shared by many connections. (If a default value is desired, that can be handled
by the application code that calls mbedtls_ssl_set_mtu().)
There are at least two ways in which this matters:
- per-connection settings can be adjusted if MTU estimates become available
during the lifetime of the connection
- it is at least conceivable that a server might recognize restricted clients
based on range of IPs and immediately set a lower MTU for them. This is much
easier to do with a per-connection setting than by maintaining multiple
near-duplicated ssl_config objects that differ only by the MTU setting.
This commit adds a new command line option `dgram_packing`
to the example server application programs/ssl/ssl_server2
allowing to allow/forbid the use of datagram packing.
For now, just check that it causes us to fragment. More tests are coming in
follow-up commits to ensure we respect the exact value set, including when
renegotiating.
When MBEDTLS_MEMORY_BUFFER_ALLOC_C was defined, the sample ssl_server2.c was
using its own memory buffer for memory allocated by the library. The memory
used wasn't obvious, so this adds a macro for the memory buffer allocated to
make the allocated memory size more obvious and hence easier to configure.
Newer features in the library have increased the overall RAM usage of the
library, when all features are enabled. ssl_server2.c, with all features enabled
was running out of memory for the ssl-opt.sh test 'Authentication: client
max_int chain, server required'.
This commit increases the memory buffer allocation for ssl_server2.c to allow
the test to work with all features enabled.
In ssl_server2, the private key objects are normally local variables
of the main function. However this does not hold for private keys in
the SNI configuration. When async callbacks are used, the test code
transfers the ownership of the private keys to the async callbacks.
Therefore the test code must free the SNI private keys through the
async callbacks (but it must not free the straight private keys this
way since they are not even heap-allocated).
When testing async callbacks with SNI, make all the keys async, not
just the first one. Otherwise the test is fragile with respect to
whether a key is used directly or through the async callbacks.
In the current test code, the object that is used as a public key in
the certificate also contains a private key. However this is because
of the way the stest code is built and does not demonstrate the API in
a useful way. Use mbedtls_pk_check_pair, which is not what real-world
code would do (since the private key would typically be in an external
cryptoprocessor) but is a more representative placeholder.
Rename to mbedtls_ssl_get_async_operation_data and
mbedtls_ssl_set_async_operation_data so that they're about
"async operation data" and not about some not-obvious "data".
The certificate passed to async callbacks may not be the one set by
mbedtls_ssl_conf_own_cert. For example, when using an SNI callback,
it's whatever the callback is using. Document this, and add a test
case (and code sample) with SNI.
Testing the case where the resume callback returns an error at the
beginning and the case where it returns an error at the end is
redundant. Keep the test after the output has been produced, to
validate that the product does not use even a valid output if the
return value is an error code.
Document how the SSL async sign callback must treat its md_alg and
hash parameters when doing an RSA signature: sign-the-hash if md_alg
is nonzero (TLS 1.2), and sign-the-digestinfo if md_alg is zero
(TLS <= 1.1).
In ssl_server2, don't use md_alg=MBEDTLS_MD_NONE to indicate that
ssl_async_resume must perform an encryption, because md_alg is also
MBEDTLS_MD_NONE in TLS <= 1.1. Add a test case to exercise this
case (signature with MBEDTLS_MD_NONE).
When a handshake step starts an asynchronous operation, the
application needs to know which SSL connection the operation is for,
so that when the operation completes, the application can wake that
connection up. Therefore the async start callbacks need to take the
SSL context as an argument. It isn't enough to let them set a cookie
in the SSL connection, the application needs to be able to find the
right SSL connection later.
Also pass the SSL context to the other callbacks for consistency. Add
a new field to the handshake that the application can use to store a
per-connection context. This new field replaces the former
context (operation_ctx) that was created by the start function and
passed to the resume function.
Add a boolean flag to the handshake structure to track whether an
asynchronous operation is in progress. This is more robust than
relying on the application to set a non-null application context.
Conflict resolution:
* ChangeLog: put the new entry from my branch in the proper place.
* include/mbedtls/error.h: counted high-level module error codes again.
* include/mbedtls/ssl.h: picked different numeric codes for the
concurrently added errors; made the new error a full sentence per
current standards.
* library/error.c: ran scripts/generate_errors.pl.
* library/ssl_srv.c:
* ssl_prepare_server_key_exchange "DHE key exchanges": the conflict
was due to style corrections in development
(4cb1f4d49c) which I merged with
my refactoring.
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first case, variable declarations: merged line
by line:
* dig_signed_len: added in async
* signature_len: removed in async
* hashlen: type changed to size_t in development
* hash: size changed to MBEDTLS_MD_MAX_SIZE in async
* ret: added in async
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first cae comment: the conflict was due to style
corrections in development (4cb1f4d49c)
which I merged with my comment changes made as part of refactoring
the function.
* ssl_prepare_server_key_exchange "Compute the hash to be signed" if
`md_alg != MBEDTLS_MD_NONE`: conflict between
ebd652fe2d
"ssl_write_server_key_exchange: calculate hashlen explicitly" and
46f5a3e9b4 "Check return codes from
MD in ssl code". I took the code from commit
ca1d742904 made on top of development
which makes mbedtls_ssl_get_key_exchange_md_ssl_tls return the
hash length.
* programs/ssl/ssl_server2.c: multiple conflicts between the introduction
of MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and new auxiliary functions and
definitions for async support, and the introduction of idle().
* definitions before main: concurrent additions, kept both.
* main, just after `handshake:`: in the loop around
mbedtls_ssl_handshake(), merge the addition of support for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and SSL_ASYNC_INJECT_ERROR_CANCEL
with the addition of the idle() call.
* main, if `opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM`: take the
code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS.
* main, loop around mbedtls_ssl_read() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
* main, loop around mbedtls_ssl_write() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
Add test cases for SSL asynchronous signature to ssl-opt.sh:
* Delay=0,1 to test the sequences of calls to f_async_resume
* Test fallback when the async callbacks don't support that key
* Test error injection at each stage
* Test renegotiation
New options in ssl_server2 to use the asynchronous private key
operation feature.
Features: resume delay to call resume more than once; error injection
at each stage; renegotiation support.
Also, introduce MBEDTLS_EINTR locally in net_sockets.c
for the platform-dependent return code macro used by
the `select` call to indicate that the poll was interrupted
by a signal handler: On Unix, the corresponding macro is EINTR,
while on Windows, it's WSAEINTR.
Previously, the idling loop in ssl_server2 didn't check whether
the underlying call to mbedtls_net_poll signalled that the socket
became invalid. This had the consequence that during idling, the
server couldn't be terminated through a SIGTERM, as the corresponding
handler would only close the sockets and expect the remainder of
the program to shutdown gracefully as a consequence of this.
This was subsequently attempted to be fixed through a change
in ssl-opt.sh by terminating the server through a KILL signal,
which however lead to other problems when the latter was run
under valgrind.
This commit changes the idling loop in ssl_server2 and ssl_client2
to obey the return code of mbedtls_net_poll and gracefully shutdown
if an error occurs, e.g. because the socket was closed.
As a consequence, the server termination via a KILL signal in
ssl-opt.sh is no longer necessary, with the previous `kill; wait`
pattern being sufficient. The commit reverts the corresponding
change.
The race goes this way:
1. ssl_recv() succeeds (ie no signal received yet)
2. processing the message leads to aborting handshake with ret != 0
3. reset ret if we were signaled
4. print error if ret is still non-zero
5. go back to net_accept() which can be interrupted by a signal
We print the error message only if the signal is received between steps 3 and
5, not when it arrives between steps 1 and 3.
This can cause failures in ssl-opt.sh where we check for the presence of "Last
error was..." in the server's output: if we perform step 2, the client will be
notified and exit, then ssl-opt.sh will send SIGTERM to the server, but if it
didn't get a chance to run and pass step 3 in the meantime, we're in trouble.
The purpose of step 3 was to avoid spurious "Last error" messages in the
output so that ssl-opt.sh can check for a successful run by the absence of
that message. However, it is enough to suppress that message when the last
error we get is the one we expect from being interrupted by a signal - doing
more could hide real errors.
Also, improve the messages printed when interrupted to make it easier to
distinguish the two cases - this could be used in a testing script wanted to
check that the server doesn't see the client as disconnecting unexpectedly.
This commit adds four tests to tests/ssl-opt.sh:
(1) & (2): Check behaviour of optional/required verification when the
trusted CA chain is empty.
(3) & (4): Check behaviour of optional/required verification when the
client receives a server certificate with an unsupported curve.
SHA-1 is now disabled by default in the X.509 layer. Explicitly enable
it in our tests for now. Updating all the test data to SHA-256 should
be done over time.
Adding the CA suppression list option to the 'ssl_server2' sample
program is a prerequisite for adding tests for this feature to the
integration test suite (ssl-opt.sh).
The sample application programs/ssl/ssl_server2.c was previously
modifies to use inttypes.h to parse a string to a 64-bit integer.
However, MSVC does not support C99, so compilation fails. This
patch modifies the sample app to use the MSVC specific parsing
functions instead of inttypes.h.
Add a test to ssl-opt.sh to ensure that in DTLS a 6 byte record counter
is compared in ssl_check_ctr_renegotiate() instead of a 8 byte one as in
the TLS case. Because currently there are no testing facilities to check
that renegotiation routines are triggered after X number of input/output
messages, the test consists on setting a renegotiation period that
cannot be represented in 6 bytes, but whose least-significant byte is 2.
If the library behaves correctly, the renegotiation routines will be
executed after two exchanged.
The library/net.c and its corresponding include/mbedtls/net.h file are
renamed to library/net_sockets.c and include/mbedtls/net_sockets.h
respectively. This is to avoid naming collisions in projects which also
have files with the common name 'net'.
* development: (73 commits)
Bump yotta dependencies version
Fix typo in documentation
Corrected misleading fn description in ssl_cache.h
Corrected URL/reference to MPI library
Fix yotta dependencies
Fix minor spelling mistake in programs/pkey/gen_key.c
Bump version to 2.1.2
Fix CVE number in ChangeLog
Add 'inline' workaround where needed
Fix references to non-standard SIZE_T_MAX
Fix yotta version dependencies again
Upgrade yotta dependency versions
Fix compile error in net.c with musl libc
Add missing warning in doc
Remove inline workaround when not useful
Fix macroization of inline in C++
Changed attribution for Guido Vranken
Merge of IOTSSL-476 - Random malloc in pem_read()
Fix for IOTSSL-473 Double free error
Fix potential overflow in CertificateRequest
...
Conflicts:
include/mbedtls/ssl_internal.h
library/ssl_cli.c
This is not very useful for TLS as mbedtls_ssl_write() will automatically
fragment and return the length used, and the application should check for that
anyway, but this is useful for DTLS where mbedtls_ssl_write() returns an
error, and the application needs to be able to query the maximum length
instead of just guessing.
