Enable handling of zero-length null output in PKCS1 v1.5 decryption.
Prevent undefined behavior by avoiding a memcpy() to zero-length null
output buffers.
In mbedtls_rsa_rsaes_oaep_encrypt and
mbedtls_rsa_rsaes_pkcs1_v15_encrypt, if the input length is 0 (which
is unusual and mostly useless, but permitted) then it is fine for the
input pointer to be NULL. Don't return an error in this case.
When `input` is NULL, `memcpy( p, input, ilen )` has undefined behavior
even if `ilen` is zero. So skip the `memcpy` call in this case.
Likewise, in `mbedtls_rsa_rsaes_oaep_decrypt`, skip the `memcpy` call if
`*olen` is zero.
Resolve incompatibilties in the RSA module where changes made for
parameter validation prevent Mbed Crypto from working. Mbed Crypto
depends on being able to pass zero-length buffers that are NULL to RSA
encryption functions.
This reverts commit 2f660d047d.
Additional changes to temporarily enable running tests:
ssl_srv.c and test_suite_ecdh use mbedtls_ecp_group_load instead of
mbedtls_ecdh_setup
test_suite_ctr_drbg uses mbedtls_ctr_drbg_update instead of
mbedtls_ctr_drbg_update_ret
It should be valid to RSASSA-PSS sign a SHA-512 hash with a 1024-bit or
1032-bit RSA key, but with the salt size being always equal to the hash
size, this isn't possible: the key is too small.
To enable use of hashes that are relatively large compared to the key
size, allow reducing the salt size to no less than the hash size minus 2
bytes. We don't allow salt sizes smaller than the hash size minus 2
bytes because that too significantly changes the security guarantees the
library provides compared to the previous implementation which always
used a salt size equal to the hash size. The new calculated salt size
remains compliant with FIPS 186-4.
We also need to update the "hash too large" test, since we now reduce
the salt size when certain key sizes are used. We used to not support
1024-bit keys with SHA-512, but now we support this by reducing the salt
size to 62. Update the "hash too large" test to use a 1016-bit RSA key
with SHA-512, which still has too large of a hash because we will not
reduce the salt size further than 2 bytes shorter than the hash size.
The RSA private key used for the test was generated using "openssl
genrsa 1016" using OpenSSL 1.1.1-pre8.
$ openssl genrsa 1016
Generating RSA private key, 1016 bit long modulus (2 primes)
..............++++++
....++++++
e is 65537 (0x010001)
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
This commit removes all the static occurrencies of the function
mbedtls_zeroize() in each of the individual .c modules. Instead the
function has been moved to utils.h that is included in each of the
modules.
The specification requires that P and Q are not too close. The specification
also requires that you generate a P and stick with it, generating new Qs until
you have found a pair that works. In practice, it turns out that sometimes a
particular P results in it being very unlikely a Q can be found matching all
the constraints. So we keep the original behavior where a new P and Q are
generated every round.
Attacks against RSA exist for small D. [Wiener] established this for
D < N^0.25. [Boneh] suggests the bound should be N^0.5.
Multiple possible values of D might exist for the same set of E, P, Q. The
attack works when there exists any possible D that is small. To make sure that
the generated key is not susceptible to attack, we need to make sure we have
found the smallest possible D, and then check that D is big enough. The
Carmichael function λ of p*q is lcm(p-1, q-1), so we can apply Carmichael's
theorem to show that D = d mod λ(n) is the smallest.
[Wiener] Michael J. Wiener, "Cryptanalysis of Short RSA Secret Exponents"
[Boneh] Dan Boneh and Glenn Durfee, "Cryptanalysis of RSA with Private Key d Less than N^0.292"
Conflict resolution:
* ChangeLog
* tests/data_files/Makefile: concurrent additions, order irrelevant
* tests/data_files/test-ca.opensslconf: concurrent additions, order irrelevant
* tests/scripts/all.sh: one comment change conflicted with a code
addition. In addition some of the additions in the
iotssl-1381-x509-verify-refactor-restricted branch need support for
keep-going mode, this will be added in a subsequent commit.
Found by running:
CC=clang cmake -D CMAKE_BUILD_TYPE="Check"
tests/scripts/depend-pkalgs.pl
(Also tested with same command but CC=gcc)
Another PR will address improving all.sh and/or the depend-xxx.pl scripts
themselves to catch this kind of thing.
The _ext suffix suggests "new arguments", but the new functions have
the same arguments. Use _ret instead, to convey that the difference is
that the new functions return a value.
Conflict resolution:
* ChangeLog: put the new entries in their rightful place.
* library/x509write_crt.c: the change in development was whitespace
only, so use the one from the iotssl-1251 feature branch.
This commit adds some explicit downcasts from `size_t` to `uint8_t` in
the RSASSA signature encoding function `rsa_rsassa_pkcs1_v15_encode`.
The truncation is safe as it has been checked beforehand that the
respective values are in the range of a `uint8_t`.
1) `mbedtls_rsa_import_raw` used an uninitialized return
value when it was called without any input parameters.
While not sensible, this is allowed and should be a
succeeding no-op.
2) The MPI test for prime generation missed a return value
check for a call to `mbedtls_mpi_shift_r`. This is neither
critical nor new but should be fixed.
3) Both the RSA keygeneration example program and the
RSA test suites contained code initializing an RSA context
after a potentially failing call to CTR DRBG initialization,
leaving the corresponding RSA context free call in the
cleanup section of the respective function orphaned.
While this defect existed before, Coverity picked up on
it again because of newly introduced MPI's that were
also wrongly initialized only after the call to CTR DRBG
init. The commit fixes both the old and the new issue
by moving the initializtion of both the RSA context and
all MPI's prior to the first potentially failing call.
The function `mbedtls_rsa_complete` is supposed to guarantee that
RSA operations will complete without failure. In contrast, it does
not ensure consistency of parameters, which is the task of the
checking functions `rsa_check_pubkey` and `rsa_check_privkey`.
Previously, the maximum allowed size of the RSA modulus was checked
in `mbedtls_rsa_check_pubkey`. However, exceeding this size would lead
to failure of some RSA operations, hence this check belongs to
`mbedtls_rsa_complete` rather than `mbedtls_rsa_check_pubkey`.
This commit moves it accordingly.
Remove a check introduced in the previous buffer overflow fix with keys of
size 8N+1 which the subsequent fix for buffer start calculations made
redundant.
Added a changelog entry for the buffer start calculation fix.
For a key of size 8N+1, check that the first byte after applying the
public key operation is 0 (it could have been 1 instead). The code was
incorrectly doing a no-op check instead, which led to invalid
signatures being accepted. Not a security flaw, since you would need the
private key to craft such an invalid signature, but a bug nonetheless.
The check introduced by the previous security fix was off by one. It
fixed the buffer overflow but was not compliant with the definition of
PSS which technically led to accepting some invalid signatures (but
not signatures made without the private key).
Fix buffer overflow in RSA-PSS signature verification when the hash is
too large for the key size. Found by Seth Terashima, Qualcomm.
Added a non-regression test and a positive test with the smallest
permitted key size for a SHA-512 hash.
This commit splits off the RSA helper functions into separate headers and
compilation units to have a clearer separation of the public RSA interface,
intended to be used by end-users, and the helper functions which are publicly
provided only for the benefit of designers of alternative RSA implementations.
It is not necessary to pass a CSPRNG to `mbedtls_rsa_deduce_moduli`, as there
exist well-working static strategies, and even if a PRNG is preferred, a
non-secure one would be sufficient.
Further, the implementation is changed to use a static strategy for the choice
of candidates which according to some benchmarks even performs better than the
previous one using random candidate choices.
This commit modifies the PKCS1 v1.5 signature verification function `mbedtls_rsa_rsassa_pkcs1_v15_verify` to prepare the
expected PKCS1-v1.5-encoded hash using the function also used by the signing routine `mbedtls_rsa_rsassa_pkcs1_v15_sign`
and comparing it to the provided byte-string afterwards. This comes at the benefits of (1) avoiding any error-prone
parsing, (2) removing the dependency of the RSA module on the ASN.1 parsing module, and (3) reducing code size.
This commit moves the code preparing PKCS1 v1.5 encoded hashes from `mbedtls_rsa_rsassa_pkcs1_v15_sign` to a separate
non-public function `rsa_rsassa_pkcs1_v15_encode`. This code-path will then be re-used by the signature verification function
`mbetls_rsa_rsassa_pkcs1_v15_verify` in a later commit.
