There are currently 4 tests in ssl-opt.sh with either -C "resend" or -S
"resend", that is, asserting that no retransmission will occur. They sometimes
fail on loaded CI machines as one side doesn't send a message fast enough,
causing the other side to retransmit, causing the test to fail.
(For the "reconnect" test there was an other issue causing random failures,
fixed in a previous commit, but even after that fix the test would still
sometimes randomly fail, even if much more rarely.)
While it's a hard problem to fix in a general and perfect way, in practice the
probability of failures can be drastically reduced by making the timeout
values much larger.
For some tests, where retransmissions are actually expected, this would have
the negative effect of increasing the average running time of the test, as
each side would wait for longer before it starts retransmission, so we have a
trade-off between average running time and probability of spurious failures.
But for tests where retransmission is not expected, there is no such trade-off
as the expected running time of the test (assuming the code is correct most of
the time) is not impacted by the timeout value. So the only negative effect of
increasing the timeout value is on the worst-case running time on the test,
which is much less important, as test should only fail quite rarely.
This commit addresses the easy case of tests that don't expect retransmission
by increasing the value of their timeout range to 10s-20s. This value
corresponds to the value used for tests that assert `-S "autoreduction"` which
are in the same case and where the current value seems acceptable so far.
It also represents an increase, compared to the values before this commit, of
a factor 20 for the "reconnect" tests which were frequently observed to fail
in the CI, and of a factor 10 for the first two "DTLS proxy" tests, which were
observed to fail much less frequently, so hopefully the new values are enough
to reduce the probability of spurious failures to an acceptable level.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The server must check client reachability (we chose to do that by checking a
cookie) before destroying the existing association (RFC 6347 section 4.2.8).
Let's make sure we do, by having a proxy-in-the-middle inject a ClientHello -
the server should notice, but not destroy the connection.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Conflicts:
* .github/issue_template.md, .github/pull_request_template.md:
The changes in Mbed Crypto are not relevant to Mbed TLS. Keep the
mbedtls versions.
check_python_files was optional in all.sh because we used to have CI
machines where pylint wasn't available. But this had the downside that
check_python_files kept breaking because it wasn't checked in the CI.
Now our CI has pylint and check_python_files should not be optional.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On some systems, such as Ubuntu up to 19.04, `pylint` is for Python 2
and `pylint3` is for Python 3, so we should not use `pylint` even if
it's available.
Use the Python module instead of the trivial shell wrapper. This way
we can make sure to use the correct Python version.
Fix#3111
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
- "Default" should only be used for tests that actually use the defaults (ie,
not passing options on the command line, except maybe debug/dtls)
- All tests in the "Encrypt then MAC" group should start with that string as a
common prefix
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
Add dependencies on !MBEDTLS_SHA512_NO_SHA384 to X.509 and SSL unit
tests that use SHA-384 (identified based on having a description that
contains "SHA384" or "SHA-384").
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
Look for any other invocation of test scripts that was removed: look for a change that removes a line (`^-.*…`) containing one of the names of a test script (without its path because it may be used with a relative path). Look for `ssl-opt.sh` and `compat.sh`, as well any file in `tests/scripts` that only exists in tls.
```
git diff 'HEAD^{/^Merge}~1' HEAD --diff-filter=M -- . ':!library/error.c' ':!library/version_features.c' ':!programs/test/query_config.c' ':!visualc' ':!*.pdf' ':!*.der' | grep -E "^-.*($(comm -23 <(git ls-tree -r --name-only 'HEAD^{/^Merge}~1') <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development 'HEAD^{/^Merge}^2')) | sed -n 's!^tests/scripts/!!p' | sed 's/\./\\./g' | tr '\n' '|')ssl-opt\.sh|compat\.sh)" | grep -v '^---'
```
This only turns up changes in `basic-in-docker.sh`.
The merge of mbed-crypto removed some tls coverage. Restore it. Also
remove references to the `crypto` subdirectory brought by the mbedtls
side of the merge. In more detail:
* `tests/scripts/all.sh`:
* `fuzz` in comments (×2): restore it.
* `CTEST_OUTPUT_ON_FAILURE=1`: don't remove it.
* `cd crypto` for `make clean`: don't restore it.
* `cleanup`: do restore `programs/fuzz/Makefile`. Don't go into `crypto`. Keep only one copy of the calls to `rm` in `cmake_subproject`.
* Comment legacy options: don't remove it.
* `crypto/Makefile` and `pre_check_seedfile`: don't restore either. See below regarding the lack of need for `pre_check_seedfile`.
* blank line in `pre_print_configuration`: restore it.
* blank line before `#### Build and test`: restore it.
* SSL tests in `component_test_full_cmake_gcc_asan` and zlib components: restore it.
* `component_test_no_pem_no_fs` (×2): the merge placed two copies in different locations. Reconcile them: unset PSA storage like in crypto, and call `ssl-opt.sh` like in tls. Put the merged version at the tls location.
* `component_test_everest`: do add it at the tls location.
* `component_test_small_mbedtls_ssl_dtls_max_buffering`: restore the tls value.
* `component_test_new_ecdh_context`…: move `component_test_new_ecdh_context` before `component_test_everest` and add a calls to `compat.sh` and `ssl-opt.sh` like in `component_test_everest`. Remove the redundant crypto-only `component_test_everest`. Don't remove `component_test_psa_collect_statuses`.
* `component_test_full_cmake_clang`: don't remove `clang` in the `msg` call. Don't remove the call to `test_psa_constant_names.py`.
* `component_test_full_make_gcc_o0`: remove it. It's subsumed by `component_test_gcc_opt`.
* `component_build_deprecated`: don't remove anything.
* `component_test_memory_buffer_allocator`: restore `ssl-opt.sh`.
* `component_test_when_no_ciphersuites_have_mac`: restore it.
* `component_test_platform_calloc_macro`: don't restore `unset MBEDTLS_MEMORY_BUFFER_ALLOC_C` which is now redundant. Don't restore explicit flags instead of `$ASAN_CFLAGS`.
* `component_test_aes_fewer_tables`…: don't remove it.
* `component_test_m32_o1`: restore SSL testing.
* `component_test_m32_everest`: restore SSL testing.
* `component_test_min_mpi_window_size`…: don't remove it.
* `component_test_valgrind`: do restore the tls version of the comment.
* `run_component`: don't remove the seedfile creation. This is better than `pre_check_seedfile` (see below).
* `pre_check_seedfile`: don't restore it. `pre_check_seedfile` (from tls) creates a seedfile once and for all. This is not good enough if a component fails in such a way as to leave a broken seedfile, or if a component leaves a seedfile with a size that's wrong for the next component to run. Instead (from crypto), `run_component` creates a sufficiently large seedfile before each component.
Merge `unremove-non-crypto` into `mbedtls/development`. The branch
`unremove-non-crypto` was obtained by starting from `mbed-crypto/development`,
then reverting many commits that removed X.509 and TLS functionality when Mbed
Crypto forked from Mbed TLS (the “unremoval”), then make a few tweaks to
facilitate the merge.
The unremoval step restored old versions of some tls files. If a file doesn't
exist in mbed-crypto, check out the mbedtls version, regardless of what
happened during the unremoval of tls files in the crypto tree. Also
unconditionally take the mbedtls version of a few files where the
modifications are completely project-specific and are not relevant in
mbed-crypto:
* `.github/issue_template.md`: completely different. We may want to reconcile
them independently as a follow-up.
* `.travis.yml`: would only be reverted to an earlier tls version.
* `README.md`: completely different. We may want to reconcile them
independently as a follow-up.
* `doxygen/input/doc_mainpage.h`: the changes in crypto were minimal and not
relevant except as a stopgap as mbed-crypto did not have its own product
versioning in the Doxygen documentation.
* `tests/.jenkins/Jenkinsfile`: completely different.
* `tests/data_files/Makefile`: there were no changes in mbed-crypto,
but the unremoval step restored an old version.
Shell script for everything to do after the merge apart from the conflict
resolution:
```
tls_files=($(comm -23 <(git ls-tree -r --name-only HEAD) <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development MERGE_HEAD))))
tls_files+=($tls_files .github/issue_template.md .travis.yml README.md doxygen/input/doc_mainpage.h tests/.jenkins/Jenkinsfile tests/data_files/Makefile)
git checkout --theirs HEAD -- $tls_files
git add -- $tls_files
```
Resolve the remaining conflicts:
* `library/CMakeLists.txt`:
* Keep the TLS definition of `src_crypto`
* `USE_SHARED_MBEDTLS_LIBRARY`: keep all three libraries, with both
`include` and `crypto/include` in `target_include_directories`, all with
version `2.21.0`.
* `programs/Makefile`:
* Reconcile the APPS lists (add/add from a differently-formatted common
ancestor): insert the `psa/*` from crypto into the tls list.
* Keep the `fuzz` target defined only in tls version.
* Keep the recipe (only in tls version) cleaning `ssl_pthread_server`
stuff for the `clean` target.
* `scripts/config.py`:
* `include_in_full`: add/add conflict. Keep both.
* `tests/scripts/all.sh`:
* `component_test_no_use_psa_crypto_full_cmake_asan`: partially old
version in crypto. Take the tls version.
* `component_test_malloc_0_null` and more: take
`component_test_malloc_0_null` from crypto (with `config.py` rather than
`config.pl`, and with `$ASAN_FLAGS` rather than an explicit list), but
add the call to `ssl-opt.sh` from tls. Take the other components from
crypto.
With this commit, building and running the unit tests with both `make ` and
`cmake` work in the default configuration on Linux. Other platforms, build
systems and configurations are likely not to work, and there is some
regression in test coverage.
There is some loss of functionality because the unremoval step restored older
versions of tls content. This commit contains the latest tls version of
tls-only files, but some changes from the tls side in files that existed on
both sides have regressed. Most problematic changes are hunks that remove some
tls-specific feature and contain either a C preprocessor symbol identifying a
tls-specific module or option, or the name of a tls-specific file. Hunks
that remove a tls-specific preprocessor symbol can be identified with the
regular expression `^-.*MBEDTLS_(ERR_)?(PKCS11|X509|NET|SSL)_`.
Subsequent commits will revert a few parts of the patch from this merge commit
in order to restore the tls functionality that it removes, ensure that the
test coverage includes what was covered in either branch, and fix test
failures.
This reverts commit 9b90f2e294.
Conflicts:
* tests/scripts/all.sh: do the same changes, dancing around the new
outcome file feature and components added in the same places.
Make sure that the components that are getting added back are at the
same locations as where they are now in mbedtls.
This reverts commit 9afb2e9921.
Conflicts:
* include/CMakeLists.txt
* "Make config.h available" comment: there has been a change
adjacent to where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* compat.sh: there has been a change immediately before where it was
removed. Just re-add what was removed.
This reverts commit 120d571e8e.
Conflicts:
* tests/CMakeLists.txt:
* target_include_directories: the instruction whose addition is to
be reverted has changed. Remove what is there now.
This reverts commit b478bb6ddb.
Conflicts:
* tests/CMakeLists.txt: revert the introduction of exe_name, but keep
the addition of ${CMAKE_SOURCE_DIR}/crypto/library/ to
target_include_directories.
This reverts commit d832f187f7.
Conflicts:
* CMakeLists.txt:
* USE_PKCS11_HELPER_LIBRARY: there has been a change immediately before
where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* USE_PKCS11_HELPER_LIBRARY: there has been a change immediately before
where it was removed. Just re-add what was removed.
This reverts commit d874a1fd14.
Conflicts:
* CMakeLists.txt:
* ENABLE_ZLIB_SUPPORT: there has been a change immediately after
where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* ENABLE_ZLIB_SUPPORT: there has been a change immediately after
where it was removed. Just re-add what was removed.
This reverts commit 8298d70bee.
Conflicts:
* library/Makefile: removal of SOEXT_X509 and SOEXT_TLS vs change of
value of SOEXT_CRYPTO. Keep all, with the new value of SOEXT_CRYPTO.
This reverts commit 1ad37309e4.
Conflicts:
* tests/scripts/test-ref-configs.pl:
* config-ccm-psk-tls1_2.h: there has been an addition of
"config-symmetric-only.h" at the place where the configurations
that are added back were removed. Keep this configuration.
This reverts commit 1c66e48670.
Conflicts:
* include/mbedtls/check_config.h:
* MBEDTLS_SSL_PROTO_SSL3: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed. Re-add it
after (alphabetical order).
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* include/mbedtls/config.h:
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* library/version_features.c: re-generate by running
scripts/generate_features.pl.
* programs/test/query_config.c: re-generate by running
scripts/generate_query_config.pl.
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
* Revert removing one symbol (MBEDTLS_NET_C) from the list of symbols
to exclude from baremetal.
* scripts/footprint.sh:
* Re-add the line to unset MBEDTLS_NET_C, but with config.py instead of
config.pl.
* tests/scripts/all.sh:
* component_test_no_platform: re-add the line to unset MBEDTLS_NET_C, but
with config.py instead of config.pl.
* component_build_arm_none_eabi_gcc,
component_build_arm_none_eabi_gcc_no_udbl_division,
component_build_arm_none_eabi_gcc_no_64bit_multiplication,
component_build_armcc: these components now use the baremetal
configuration, so they do not need to turn off MBEDTLS_NET_C explicitly.
This reverts commit bb1f701212.
* include/mbedtls/check_config.h:
* MBEDTLS_X509_RSASSA_PSS_SUPPORT: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed.
Re-add it before MBEDTLS_SHA512_NO_SHA384 to keep it grouped
with MBEDTLS_RSA_C.
Conflicts:
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
Pylint when installed as a distro package can be installed as pylint3, whilst as
a PEP egg, it can be installed as pylint.
This commit changes the scripts to first use pylint if installed, and optionally
look for pylint3 if not installed. This is to allow a preference for the PEP
version over the distro version, assuming the PEP one is more likely to be
the correct one.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Counting of the fragments has been shifted from the writing section to
the reading. This is more reliable because one reading is made for one
fragment and during one write the library can internally divide data
into two fragments
Signed-off-by: Piotr Nowicki <piotr.nowicki@arm.com>
Initialize variables to NULL before doing any operations that might fail.
This fixes a case where the allocation fails on the first context, which
previously made the code free the second, uninitialized context.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Add a conditional buffer resizing feature. Introduce tests exercising
it in various setups (serialization, renegotiation, mfl manipulations).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The .pl version is now a compat wrapper around the .py script. Better call the
.py script directly.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Adds an additional boundary check to the test parameter bytes_arg in
generate_random() in test_suite_psa_crypto.function.
This is to check against a possible underflow, and to avoid a warning,
"argument ... exceeds maximum object size", (-Werror=alloc-size-larger-than)
that GCC 7 generates.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Exercise the feature alone, with record splitting and DTLS connection ID.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Signed-off-by: Darryl Green <darryl.green@arm.com>
For this test it is good to have a handshake messages length as big as
possible, so for the server the certificate verification mode is
changed from default NONE to REQUIRED. It requires the client to send
certificate date to the server during handshake
Signed-off-by: Piotr Nowicki <piotr.nowicki@arm.com>
Create and provide a structure with default options so that the caller won't have
to pass all of the parameters each time the handshake is called. In the future
this can be improved so that the options are passed as a string, just like in
ssl-opt.sh.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The ssl-opt.sh test cases using session resumption tend to fail occasionally
on the CI due to a race condition in how ssl_server2 and ssl_client2 handle
the reconnection cycle.
The server does the following in order:
- S1 send application data
- S2 send a close_notify alert
- S3 close the client socket
- S4 wait for a "new connection" (actually a new datagram)
- S5 start a handshake
The client does the following in order:
- C1 wait for and read application data from the server
- C2 send a close_notify alert
- C3 close the server socket
- C4 reset session data and re-open a server socket
- C5 start a handshake
If the client has been able to send the close_notify (C2) and if has been
delivered to the server before if closes the client socket (S3), when the
server reaches S4, the datagram that we start the new connection will be the
ClientHello and everything will be fine.
However if S3 wins the race and happens before the close_notify is delivered,
in S4 the close_notify is what will be seen as the first datagram in a new
connection, and then in S5 this will rightfully be rejected as not being a
valid ClientHello and the server will close the connection (and go wait for
another one). The client will then fail to read from the socket and exit
non-zero and the ssl-opt.sh harness will correctly report this as a failure.
In order to avoid this race condition in test using ssl_client2 and
ssl_server2, this commits introduces a new command-line option
skip_close_notify to ssl_client2 and uses it in all ssl-opt.sh tests that use
session resumption with DTLS and ssl_server2.
This works because ssl_server2 knows how many messages it expects in each
direction and in what order, and closes the connection after that rather than
relying on close_notify (which is also why there was a race in the first
place).
Tests that use another server (in practice there are two of them, using
OpenSSL as a server) wouldn't work with skip_close_notify, as the server won't
close the connection until the client sends a close_notify, but for the same
reason they don't need it (there is no race between receiving close_notify and
closing as the former is the cause of the later).
An alternative approach would be to make ssl_server2 keep the connection open
until it receives a close_notify. Unfortunately it creates problems for tests
where we simulate a lossy network, as the close_notify could be lost (and the
client can't retransmit it). We could modify udp_proxy with an option to never
drop alert messages, but when TLS 1.3 comes that would no longer work as the
type of messages will be encrypted.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
(Only the top-level ones, ie, for each call to eg asn1_get_mpi(), ensure
there's at least one test case that makes this call fail in one way, but don't
test the various ways to make asn1_get_mpi fail - that should be covered
elsewhere.)
- the new checks added by the previous commits needed exercising
- existing tests sometimes had wrong descriptions or where passing for the
wrong reason (eg with the "length mismatch" test, the function actually
failed before reaching the length check)
- while at it, add tests for the rest as well
The valid minimal-size key was generated with:
openssl genrsa 128 2>/dev/null | openssl rsa -outform der 2>/dev/null | xxd -p
Exercise the library functions with calloc returning NULL for a size
of 0. Make this a separate job with UBSan (and ASan) to detect
places where we try to dereference the result of calloc(0) or to do
things like
buf = calloc(size, 1);
if (buf == NULL && size != 0) return INSUFFICIENT_MEMORY;
memcpy(buf, source, size);
which has undefined behavior when buf is NULL at the memcpy call even
if size is 0.
This is needed because other test components jobs either use the system
malloc which returns non-NULL on Linux and FreeBSD, or the
memory_buffer_alloc malloc which returns NULL but does not give as
useful feedback with ASan (because the whole heap is a single C
object).
As the SSL programs, like ssl_client2 and ssl_server2, are dependent on
SSL and therefore about to be removed, the only consumer of query_config
is the query_compile_time_config test. As such, it makes sense to move
query_config to be next to what uses it.
Goals:
* Build with common compilers with common options, so that we don't
miss a (potentially useful) warning only triggered with certain
build options.
* A previous commit removed -O0 test jobs, leaving only the one with
-m32. We have inline assembly that is disabled with -O0, falling
back to generic C code. This commit restores a test that runs the
generic C code on a 64-bit platform.
Files deleted by us: keep them deleted.
```
git rm $(git status -s | sed -n 's/^DU //p')
```
Individual files with conflicts:
* `README.md`: keep the crypto version.
* `doxygen/input/doc_mainpage.h`: keep the crypto version (with an obsolete Mbed Crypto version number).
* `include/mbedtls/error.h`:
* `ERROR`: similar additions made through parallel commits, with only whitespace differences. Align with the tls version.
* `library/CMakeLists.txt`: keep the crypto version.
* `library/Makefile`: keep the crypto version.
* `scripts/generate_errors.pl`: keep the crypto version (the relevant changes were made through parallel commits).
* `tests/scripts/check-test-cases.py`:
* `Results`: keep the crypto version, which has both the new argument to the constructor (added in crypto only) and the class docstring (added through parallel commits).
* `tests/suites/helpers.function`:
* `ARRAY_LENGTH`, `ASSERT_ALLOC`: additions in the same location. Keep both, in indifferent order.
* `tests/suites/target_test.function`:
* `receive_uint32`: keep the crypto version which has an additional bug fix. The tls changes made in tls are irrelevant after this bug fix.
* `visualc/VS2010/mbedTLS.vcxproj`: run `scripts/generate_visualc_files.pl`.
Review of non-conflicting changes:
* `all.sh`: 1 change.
* zlib test components: don't add them.
* `include/CMakeLists.txt`: 1 change.
* `target_include_directories`: doesn't work as is (different target name). Don't take the change.
* All other non-conflicting changes: take them.
Let the caller decide what certificates and keys are loaded (EC/RSA)
instead of loading both for the server, and an unspecified one
for the client. Use only DER encoding.
For each of the crypto-only presets, run the build and check that the
resulting libmbedx509 and libmbedtls are empty.
Don't bother testing, because for each crypto-only preset, another
component builds that plus the x509 and tls parts and tests
everything.
We already have a specific component in all.sh for testing SSLv3, we don't
need to also test it in components that aren't specifically about it.
Previously config.py full enabled SSLv3, but it no longer does since it is
deprecated.
Change the encoding of key types, EC curve families and DH group
families to make the low-order bit a parity bit (with even parity).
This ensures that distinct key type values always have a Hamming
distance of at least 2, which makes it easier for implementations to
resist single bit flips.
All key types now have an encoding on 32 bits where the bottom 16 bits
are zero. Change to using 16 bits only.
Keep 32 bits for key types in storage, but move the significant
half-word from the top to the bottom.
Likewise, change EC curve and DH group families from 32 bits out of
which the top 8 and bottom 16 bits are zero, to 8 bits only.
Reorder psa_core_key_attributes_t to avoid padding.
Remove the values of curve encodings that are based on the TLS registry
and include the curve size, keeping only the new encoding that merely
encodes a curve family in 8 bits.
Keep the old constant names as aliases for the new values and
deprecate the old names.
Define constants for ECC curve families and DH group families. These
constants have 0x0000 in the lower 16 bits of the key type.
Support these constants in the implementation and in the PSA metadata
tests.
Switch the slot management and secure element driver HAL tests to the
new curve encodings. This requires SE driver code to become slightly
more clever when figuring out the bit-size of an imported EC key since
it now needs to take the data size into account.
Switch some documentation to the new encodings.
Remove the macro PSA_ECC_CURVE_BITS which can no longer be implemented.
Change the representation of psa_ecc_curve_t and psa_dh_group_t from
the IETF 16-bit encoding to a custom 24-bit encoding where the upper 8
bits represent a curve family and the lower 16 bits are the key size
in bits. Families are based on naming and mathematical similarity,
with sufficiently precise families that no two curves in a family have
the same bit size (for example SECP-R1 and SECP-R2 are two different
families).
As a consequence, the lower 16 bits of a key type value are always
either the key size or 0.
Don't rely on the bit size encoded in the PSA curve identifier, in
preparation for removing that.
For some inputs, the error code on EC key creation changes from
PSA_ERROR_INVALID_ARGUMENT to PSA_ERROR_NOT_SUPPORTED or vice versa.
There will be further such changes in subsequent commits.
Key types are now encoded through a category in the upper 4 bits (bits
28-31) and a type-within-category in the next 11 bits (bits 17-27),
with bit 16 unused and bits 0-15 only used for the EC curve or DH
group.
For symmetric keys, bits 20-22 encode the block size (0x0=stream,
0x3=8B, 0x4=16B).
The splitting of this test into two versions depending on whether SHA-1 was
allowed by the server was a mistake in
5d2511c4d4 - the test has nothing to do with
SHA-1 in the first place, as the server doesn't request a certificate from
the client so it doesn't matter if the server accepts SHA-1 or not.
psa_hash_compare is tested for good cases and invalid-signature cases
in hash_compute_compare. Also test invalid-argument cases. Also run a
few autonomous test cases with valid arguments.
While the whole script makes (often implicit) assumptions about the version of
GnuTLS used, generally speaking it should work out of the box with the version
packaged on our reference testing platform, which is Ubuntu 16.04 so far.
With the update from Jan 8 2020 (3.4.10-4ubuntu1.6), the patches for rejecting
SHA-1 in certificate signatures were backported, so we should avoid presenting
SHA-1 signed certificates to a GnuTLS peer in ssl-opt.sh.
Because two buffers were aliased too early in the code, it was possible that
after an allocation failure, free() would be called twice for the same pointer.
Previously mocked non-blocking read/write was returning 0 when buffer was empty/full. That was causing ERR_SSL_CONN_EOF error in tests which was using these mocked callbacks. Beside that non-blocking read/write was returning ERR_SSL_WANT_READ/_WRITE depending on block pattern set by test design. Such behavior forced to redesign of these functions so that they could be used in other tests
This error occurs when free space in the buffer is in the middle (the buffer has come full circle) and function mbedtls_test_buffer_put is called. Then the arguments for memcpy are calculated incorrectly and program ends with segmentation fault
Before, the string to parse may contain trailing garbage (there was
never more than one byte), and there was a separate argument
indicating the length of the content. Now, the string to parse is the
exact content, and the test code runs an extra test step with a
trailing byte added.
If there was a fatal error (bizarre behavior from the standard
library, or missing test data file), execute_tests did not close the
outcome file. Fix this.
Fix get_len_step when buffer_size==0. The intent of this test is to
ensure (via static or runtime buffer overflow analysis) that
mbedtls_asn1_get_len does not attempt to access beyond the end of the
buffer. When buffer_size is 0 (reached from get_len when parsing a
1-byte buffer), the buffer is buf[1..1] because allocating a 0-byte
buffer might yield a null pointer rather than a valid pointer. In this
case the end of the buffer is p==buf+1, not buf+buffer_size which is
buf+0.
The test passed because calling mbedtls_asn1_get_len(&p,end,...) with
end < p happens to work, but this is not guaranteed.
This is useful to inspect what the script does manually, in particular
to check that expected values do get tested. --keep-c provides the
same information but in a way that's harder to access.
Filter out non-ASCII characters in automatically processed headers.
Do this in a way that minimizes the code change: keep manipulating
strings, but strip off non-ASCII characters when reading lines, which
should only remove characters in comments that we don't parse anyway.
In a unit test we want to avoid accessing the network. To test the
handshake in the unit test suite we need to implement a connection
between the server and the client. This socket implementation uses
two ring buffers to mock the transport layer.
In a unit test we want to avoid accessing the network. To test the
handshake in the unit test suite we need to implement a connection
between the server and the client. This ring buffer implementation will
serve as the said connection.
The new macro ASSERT_ALLOC allocates memory with mbedtls_calloc and
fails the test if the allocation fails. It outputs a null pointer if
the requested size is 0. It is meant to replace existing calls to
mbedtls_calloc.
We're going to create some edge cases where the attributes of a key
are not bitwise identical to the attributes passed during creation.
Have a test function ready for that.
When MBEDTLS_TEST_DEPRECATED is defined, run some additional tests to
validate deprecated PSA macros. We don't need to test deprecated
features extensively, but we should at least ensure that they don't
break the build.
Add some code to component_build_deprecated in all.sh to run these
tests with MBEDTLS_DEPRECATED_WARNING enabled. The tests are also
executed when MBEDTLS_DEPRECATED_WARNING and
MBEDTLS_DEPRECATED_REMOVED are both disabled.
Rename some macros and functions related to signature which are
changing as part of the addition of psa_sign_message and
psa_verify_message.
perl -i -pe '%t = (
PSA_KEY_USAGE_SIGN => PSA_KEY_USAGE_SIGN_HASH,
PSA_KEY_USAGE_VERIFY => PSA_KEY_USAGE_VERIFY_HASH,
PSA_ASYMMETRIC_SIGNATURE_MAX_SIZE => PSA_SIGNATURE_MAX_SIZE,
PSA_ASYMMETRIC_SIGN_OUTPUT_SIZE => PSA_SIGN_OUTPUT_SIZE,
psa_asymmetric_sign => psa_sign_hash,
psa_asymmetric_verify => psa_verify_hash,
); s/\b(@{[join("|", keys %t)]})\b/$t{$1}/ge' $(git ls-files . ':!:**/crypto_compat.h')
Move backward compatibility aliases to a separate header. Reserve
crypto_extra.h for implementation-specific extensions that we intend
to keep supporting.
This is better documentation for users. New users should simply ignore
backward compatibility aliases, and old users can look at
crypto_compat.h to see what is deprecated without bothering about new
features appearing in crypto_extra.h.
This facilitates maintenance because scripts such as
generate_psa_constants that want to ignore backward compability
aliases can simply exclude crypto_compat.h from their parsing.
When gathering test cases from test_suite_psa_crypto_metadata, look up
the test function explicitly. This way test_psa_constant_names will
error out if we add a new test function that needs coverage here.
This change highlights an omission in the previous version:
asymmetric_signature_wildcard was silently ignored as a source of
algorithm expressions to test. Fix that.
Key agreement algorithms were excluded back when they were constructed
with a macro conveying the key agreement itself taking the KDF as an
argument, because that was hard to support. Now the encoding has
changed and key agreement algorithms are constructed with
PSA_ALG_KEY_AGREEMENT taking two arguments, one that identifies the
raw key agreement and one that identifies the KDF. This is easy to
process, so add support.
Insist that test cases must only use macro names that are declared in
a header. This may catch errors such as not parsing the intended
files.
Make this check easily overridden in a derived class.
The size of the seedfile used by the entropy module when
MBEDTLS_ENTROPY_NV_SEED is enabled is 32 byte when
MBEDTLS_ENTROPY_FORCE_SHA256 is enabled or MBEDTLS_SHA512_C is
disabled, and 64 bytes otherwise. A larger seedfile is ok on
entry (the code just grabs the first N bytes), but a smaller seedfile
is not ok. Therefore, if you run a component with a 32-byte seedfile
and then a component with a 64-byte seedfile, the second component
fails in the unit tests (up to test_suite_entropy which erases the
seedfile and creates a fresh one).
This is ok up to now because we only enable MBEDTLS_ENTROPY_NV_SEED
together with MBEDTLS_ENTROPY_FORCE_SHA256. But it prevents enabling
MBEDTLS_ENTROPY_NV_SEED without MBEDTLS_ENTROPY_FORCE_SHA256.
To fix this, unconditionally create a seedfile before each component.
The test suites should always run self-tests for all enabled features.
Otherwise we miss failing self-tests in CI runs, because we don't
always run the selftest program independently.
There was one spurious dependency to remove:
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY for ctr_drbg, which was broken but
has now been fixed.
Enabling MBEDTLS_MEMORY_BUFFER_ALLOC_C module together with
MBEDTLS_PLATFORM_MEMORY causes the library to use its own malloc
replacement. This makes memory management analyzers such as ASan
largely ineffective. We now test MBEDTLS_MEMORY_BUFFER_ALLOC_C
separately. Disable it in the "full" config.
This mirrors a change that was made in Mbed TLS on config.pl and had
not been ported to Mbed Crypto yet.
With this commit, config.py is aligned in Mbed Crypto and Mbed TLS.
First deal with deleted files.
* Files deleted by us: keep them deleted.
* Files deleted by them, whether modified by us or not: keep our version.
```
git rm $(git status -s | sed -n 's/^DU //p')
git reset -- $(git status -s | sed -n 's/^D //p')
git checkout -- $(git status -s | sed -n 's/^ D //p')
git add -- $(git status -s | sed -n 's/^UD //p')
```
Individual files with conflicts:
* `3rdparty/everest/library/Hacl_Curve25519_joined.c`: spurious conflict because git mistakenly identified this file as a rename. Keep our version.
* `README.md`: conflict due to their change in a paragraph that doesn't exist in our version. Keep our version of this paragraph.
* `docs/architecture/Makefile`: near-identical additions. Adapt the definition of `all_markdown` and include the clean target.
* `doxygen/input/docs_mainpage.h`: conflict in the version number. Keep our version number.
* `include/mbedtls/config.h`: two delete/modify conflicts. Keep the removed chunks out.
* `library/CMakeLists.txt`: discard all their changes as they are not relevant.
* `library/Makefile`:
* Discard the added chunk about the crypto submodule starting with `INCLUDING_FROM_MBEDTLS:=1`.
* delete/modify: keep the removed chunk out.
* library build: This is almost delete/modify. Their changes are mostly not applicable. Do keep the `libmbedcrypto.$(DLEXT): | libmbedcrypto.a` order dependency.
* `.c.o`: `-o` was added on both sides but in a different place. Change to their place.
* `library/error.c`: to be regenerated.
* `library/version_features.c`: to be regenerated.
* `programs/Makefile`: Most of the changes are not relevant. The one relevant change is in the `clean` target for Windows; adapt it by removing `/S` from our version.
* `programs/test/query_config.c`: to be regenerated.
* `scripts/config.py`: added in parallel on both sides. Keep our version.
* `scripts/footprint.sh`: parallel changes. Keep our version.
* `scripts/generate_visualc_files.pl`: one delete/modify conflict. Keep the removed chunks out.
* `tests/Makefile`: discard all of their changes.
* `tests/scripts/all.sh`:
* `pre_initialize_variables` add `append_outcome`: add it.
* `pre_initialize_variables` add `ASAN_CFLAGS`: already there, keep our version.
* `pre_parse_command_line` add `--no-append-outcome`: add it.
* `pre_parse_command_line` add `--outcome-file`: add it.
* `pre_print_configuration`: add `MBEDTLS_TEST_OUTCOME_FILE`.
* Several changes in SSL-specific components: keep our version without them.
* Several changes where `config.pl` was changed to `config.py` and there was an adjacent difference: keep our version.
* Changes regarding the inclusion of `MBEDTLS_MEMORY_xxx`: ignore them here, they will be normalized in a subsequent commit.
* `component_test_full_cmake_gcc_asan`: add it without the TLS tests.
* `component_test_no_use_psa_crypto_full_cmake_asan`: keep the fixed `msg`, discard other changes.
* `component_test_memory_buffer_allocator_backtrace`, `component_test_memory_buffer_allocator`: add them without the TLS tests.
* `component_test_m32_everest`: added in parallel on both sides. Keep our version.
* `tests/scripts/check-names.sh`, `tests/scripts/list-enum-consts.pl`, `tests/scripts/list-identifiers.sh`, ``tests/scripts/list-macros.sh`: discard all of their changes.
* `tests/scripts/test-ref-configs.pl`: the change in the conflict is not relevant, so keep our version there.
* `visualc/VS2010/*.vcxproj`: to be regenerated.
Regenerate files:
```
scripts/generate_visualc_files.pl
git add visualc/VS2010/*.vcxproj
scripts/generate_errors.pl
git add library/error.c
scripts/generate_features.pl
git add library/version_features.c
scripts/generate_query_config.pl
git add programs/test/query_config.c
```
Rejected changes in non-conflicting files:
* `CMakeLists.txt`: discard their addition which has already been side-ported.
* `doxygen/mbedtls.doxyfile`: keep the version number change. Discard the changes related to `../crypto` paths.
Keep the following changes after examination:
* `.travis.yml`: all of their changes are relevant.
* `include/mbedtls/error.h`: do keep their changes. Even though Crypto doesn't use TLS errors, it must not encroach on TLS's allocated numbers.
* `tests/scripts/check-test-cases.py`: keep the code dealing with `ssl-opt.sh`. It works correctly when the file is not present.
The tests were not covering get for a symbol with a value. No symbol
has an uncommented value in the default config.h. (Actually there's
_CRT_SECURE_NO_DEPRECATE, but that's a bit of a hack that this script
is not expected to handle, so don't use it).
Add tests of "get FOO" after "set FOO" and "set FOO value", so that we
have coverage for "get FOO" when "FOO" has a value.
We currently test setting a symbol with a value even if it didn't
originally had one and vice versa. So there's no need to have separate
lists of symbols to test with. Just test everything we want to test
with each symbol.
Normally a valueless symbol remains valueless and a symbol with a
value keeps having one. But just in case a symbol does get changed
from valueless to having a value, make sure there's a space between
the symbol and the value. And if a symbol gets changed from having a
value to valueless, strip trailing whitespace.
Add corresponding tests.
Also fix the case of a valueless symbol added with the set method,
which would have resulted in attempting to use None as a string. This
only happened with the Python API, not with the command line API.
The test suite generator has been a Python script for a long time,
but tests/CMakeLists.txt still looked for Perl. The reference to
PYTHON_INTERP only worked due to a call to find_package(PythonInterp)
in the toplevel CMakeLists.txt, and cmake would not have printed the
expected error message if python was not available.
Run config.py with various options and store the results in files.
This script also supports the now-removed config.pl.
This is a framework to run non-regression tests on config.py: run it
with the old version, run it with the new version, and compare the
output.
This is deliberately not a functional test suite so that we don't need
to maintain a set of known outputs. When something changes in
config.py (or config.h), run the script before, run it after, and
check manually whether any differences in the output are acceptable.
git grep -Fl /config.pl | xargs sed -i -e 's!/config\.pl!/config.py!g'
Also:
* Change one comment in include/mbedtls/check_config.h.
* Change PERL to PYTHON in CMakeLists.txt.
MBEDTLS_PK_SIGNATURE_MAX_SIZE is tested in Mbed Crypto. Its effect on
Mbed TLS is also tested via the X.509 tests. The case of
MBEDTLS_MPI_MAX_SIZE < MBEDTLS_ECDSA_MAX_LEN, for which this component
was added as a regression test, is covered by config-suite-b.h which
is tested via test-ref-configs.pl.
In pk_sign_verify, if mbedtls_pk_sign() failed, sig_len was passed to
mbedtls_pk_verify_restartable() without having been initialized. This
worked only because in the only test case that expects signature to
fail, the verify implementation doesn't look at sig_len before failing
for the expected reason.
The value of sig_len if sign() fails is undefined, so set sig_len to
something sensible.
Add pk_write test cases where the ASN.1 INTEGER encoding of the
private value would not have the mandatory size for the OCTET STRING
that contains the value.
ec_256_long_prv.pem is a random secp256r1 private key, selected so
that the private value is >= 2^255, i.e. the top bit of the first byte
is set (which would cause the INTEGER encoding to have an extra
leading 0 byte).
ec_521_short_prv.pem is a random secp521r1 private key, selected so
that the private value is < 2^519, i.e. the first byte is 0 and the
top bit of the second byte is 0 (which would cause the INTEGER
encoding to have one less 0 byte at the start).
The corner case tests were designed for 32 and 64 bit limbs
independently and performed only on the target platform. On the other
platform they are not corner cases anymore, but we can still exercise
them.
The corner case tests were designed for 64 bit limbs and failed on 32
bit platforms because the numbers in the test ended up being stored in a
different number of limbs and the function (correctly) returnd an error
upon receiving them.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
Enabling memory_buffer_alloc is slow and makes ASan ineffective. We
have a patch pending to remove it from the full config. In the
meantime, disable it explicitly.
None of the test cases in tests_suite_memory_buffer_alloc actually
need MBEDTLS_MEMORY_DEBUG. Some have additional checks when
MBEDTLS_MEMORY_DEBUG but all are useful even without it. So enable
them all and #ifdef out the parts that require DEBUG.
The test case "Memory buffer small buffer" emits a message
"FATAL: verification of first header failed". In this test case, it's
actually expected, but it looks weird to see this message from a
passing test. Add a comment that states this explicitly, and modify
the test description to indicate that the failure is expected, and
change the test function name to be more accurate.
Fix#309
The default entropy nonce length is either zero or nonzero depending
on the desired security strength and the entropy length.
The implementation calculates the actual entropy nonce length from the
actual entropy length, and therefore it doesn't need a constant that
indicates the default entropy nonce length. A portable application may
be interested in this constant, however. And our test code could
definitely use it.
Define a constant MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN and use it in
test code. Previously, test_suite_ctr_drbg had knowledge about the
default entropy nonce length built in and test_suite_psa_crypto_init
failed. Now both use MBEDTLS_CTR_DRBG_ENTROPY_NONCE_LEN.
This change means that the test ctr_drbg_entropy_usage no longer
validates that the default entropy nonce length is sensible. So add a
new test that checks that the default entropy length and the default
entropy nonce length are sufficient to ensure the expected security
strength.
Change the default entropy nonce length to be nonzero in some cases.
Specifically, the default nonce length is now set in such a way that
the entropy input during the initial seeding always contains enough
entropy to achieve the maximum possible security strength per
NIST SP 800-90A given the key size and entropy length.
If MBEDTLS_CTR_DRBG_ENTROPY_LEN is kept to its default value,
mbedtls_ctr_drbg_seed() now grabs extra entropy for a nonce if
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled and either
MBEDTLS_ENTROPY_FORCE_SHA256 is enabled or MBEDTLS_SHA512_C is
disabled. If MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled, or if
the entropy module uses SHA-512, then the default value of
MBEDTLS_CTR_DRBG_ENTROPY_LEN does not require a second call to the
entropy function to achieve the maximum security strength.
This choice of default nonce size guarantees NIST compliance with the
maximum security strength while keeping backward compatibility and
performance high: in configurations that do not require grabbing more
entropy, the code will not grab more entropy than before.
When running 'make test' with GNU make, if a test suite program
displays "PASSED", this was automatically counted as a pass. This
would in particular count as passing:
* A test suite with the substring "PASSED" in a test description.
* A test suite where all the test cases succeeded, but the final
cleanup failed, in particular if a sanitizer reported a memory leak.
Use the test executable's return status instead to determine whether
the test suite passed. It's always 0 on PASSED unless the executable's
cleanup code fails, and it's never 0 on any failure.
FixARMmbed/mbed-crypto#303
Some sanitizers default to displaying an error message and recovering.
This could result in a test being recorded as passing despite a
complaint from the sanitizer. Turn off sanitizer recovery to avoid
this risk.
When running 'make test' with GNU make, if a test suite program
displays "PASSED", this was automatically counted as a pass. This
would in particular count as passing:
* A test suite with the substring "PASSED" in a test description.
* A test suite where all the test cases succeeded, but the final
cleanup failed, in particular if a sanitizer reported a memory leak.
Use the test executable's return status instead to determine whether
the test suite passed. It's always 0 on PASSED unless the executable's
cleanup code fails, and it's never 0 on any failure.
FixARMmbed/mbed-crypto#303
Some sanitizers default to displaying an error message and recovering.
This could result in a test being recorded as passing despite a
complaint from the sanitizer. Turn off sanitizer recovery to avoid
this risk.
config-symmetric-only.h enables MBEDTLS_ENTROPY_NV_SEED so it needs a
seedfile. Create it in test-ref-configs.pl so that the script works on
its own, even if it is not invoked by all.sh.
Add a reference configuration with most symmetric cryptographic
algorithms enabled, but without any asymmetric cryptography. This
checks that we don't have spurious unexpected dependencies on
asymmetric-only modules such as bignum.
Keep HAVE_ASM disabled because it's platform-specific.
Keep HAVEGE disabled because it's untested and not recommended.
Keep MEMORY_BUFFER_ALLOC out because it isn't related to cryptography
at all and it makes memory sanitizers ineffective.
Keep THREADING disabled because it requires special build options.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
This removes the need for the test-only function
mbedtls_ctr_drbg_seed_entropy_len(). Just call
mbedtls_ctr_drbg_set_entropy_len() followed by
mbedtls_ctr_drbg_seed(), it works now.
Consolidate the invalid-handle tests from test_suite_psa_crypto and
test_suite_psa_crypto_slot_management. Start with the code in
test_suite_psa_crypto_slot_management and adapt it to test one invalid
handle value per run of the test function.
mbedtls_asn1_get_int() and mbedtls_asn1_get_mpi() behave differently
on negative INTEGERs (0200). Don't change the library behavior for now
because this might break interoperability in some applications. Change
the test function to the library behavior.
Fix the test data with negative INTEGERs. These test cases were
previously not run (they were introduced but deliberately deactivated
in 27d806fab4). The test data was
actually wrong: ASN.1 uses two's complement, which has no negative 0,
and some encodings were wrong. Now the tests have correct data, and
the test code rectifies the expected data to match the library
behavior.
mbedtls_asn1_get_int() and mbedtls_asn1_get_mpi() behave differently
on an empty INTEGER (0200). Don't change the library behavior for now
because this might break interoperability in some applications. Write
a test function that matches the library behavior.
When the asn1parse module is enabled but the bignum module is
disabled, the asn1parse test suite did not work. Fix this.
* Fix a syntax error in get_integer() (label immediately followed by a
closing brace).
* Fix an unused variable in get_integer().
* Fix `TEST_ASSERT( *p == q );` in nested_parse() failing because `*p`
was not set.
* Fix nested_parse() not outputting the length of what it parsed.
Add some ECDSA test cases where the hash is shorter or longer than the
key length, to check that the API doesn't enforce a relationship
between the two.
For the sign_deterministic tests, the keys are
tests/data_files/ec_256_prv.pem and tests/data_files/ec_384_prv.pem
and the signatures were obtained with Python Cryptodome:
from binascii import hexlify, unhexlify
from Crypto.Hash import SHA256, SHA384
from Crypto.PublicKey import ECC
from Crypto.Signature import DSS
k2 = ECC.import_key(unhexlify("3077020101042049c9a8c18c4b885638c431cf1df1c994131609b580d4fd43a0cab17db2f13eeea00a06082a8648ce3d030107a144034200047772656f814b399279d5e1f1781fac6f099a3c5ca1b0e35351834b08b65e0b572590cdaf8f769361bcf34acfc11e5e074e8426bdde04be6e653945449617de45"))
SHA384.new(b'hello').hexdigest()
hexlify(DSS.new(k2, 'deterministic-rfc6979').sign(SHA384.new(b'hello')))
k3 = ECC.import_key(unhexlify("3081a402010104303f5d8d9be280b5696cc5cc9f94cf8af7e6b61dd6592b2ab2b3a4c607450417ec327dcdcaed7c10053d719a0574f0a76aa00706052b81040022a16403620004d9c662b50ba29ca47990450e043aeaf4f0c69b15676d112f622a71c93059af999691c5680d2b44d111579db12f4a413a2ed5c45fcfb67b5b63e00b91ebe59d09a6b1ac2c0c4282aa12317ed5914f999bc488bb132e8342cc36f2ca5e3379c747"))
SHA256.new(b'hello').hexdigest()
hexlify(DSS.new(k3, 'deterministic-rfc6979').sign(SHA256.new(b'hello')))
There were tests to ensure that each entropy source reaches its
threshold, but no test that covers the total amount of entropy. Add
test cases with a known set of entropy sources and make sure that we
always gather at least MBEDTLS_ENTROPY_BLOCK_SIZE bytes from a strong
source.
Always pass a context object to entropy_dummy_source. This lets us
write tests that register more than one source and keep track of how
many times each one is called.
* origin/pr/2843: (26 commits)
Make hyperlink a hyperlink in every markdown flavor
Update the crypto submodule to be the same as development
Document test case descriptions
Restore MBEDTLS_TEST_OUTCOME_FILE after test_default_out_of_box
ssl-opt.sh: Fix some test case descriptions
Reject non-ASCII characters in test case descriptions
Process input files as binary
Factor description-checking code into a common function
Fix cosmetic error in warnings
Fix regex matching run_test calls in ssl-opt.sh
all.sh: run check-test-cases.py
Better information messages for quick checks
Fix configuration short name in key-exchanges.pl
Make test case descriptions unique
New test script check-test-cases.py
Document the test outcome file
Create infrastructure for architecture documents in Markdown
all.sh --outcome-file creates an outcome file
Set meaningful test configuration names when running tests
ssl-opt: remove semicolons from test case descriptions
...
Add invasive checks that peek at the stored persistent data after some
successful import, generation or destruction operations and after
reinitialization to ensure that the persistent data in storage has the
expected content.
Add a parameter to the p_validate_slot_number method to allow the
driver to modify the persistent data.
With the current structure of the core, the persistent data is already
updated. All it took was adding a way to modify it.
When registering a key in a secure element, go through the transaction
mechanism. This makes the code simpler, at the expense of a few extra
storage operations. Given that registering a key is typically very
rare over the lifetime of a device, this is an acceptable loss.
Drivers must now have a p_validate_slot_number method, otherwise
registering a key is not possible. This reduces the risk that due to a
mistake during the integration of a device, an application might claim
a slot in a way that is not supported by the driver.
Since components run in the main process, unsetting
MBEDTLS_TEST_OUTCOME_FILE unset it in subsequent components as well.
To avoid this, save and restore the value.
(Making each component run in a subshell would be a better solution,
but it would be a much bigger change.)
Fix copypasta in some test cases with
MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES enabled.
Add unique suffix to the two
"DTLS fragmenting: proxy MTU: auto-reduction" test cases.
This is testing with $kex, not without $kex, so use $kex, not "-$kex".
In test-ref-configs.pl, use $conf rather than "$conf". This is purely
a matter of Perl coding style.
This script checks test case descriptions in test_suite_*.data and
ssl-opt.sh.
It reports the following issues:
* Error: forbidden character in a test case description.
* Error: Duplicate test description.
* Warning: Test description is too long.
If none of the inputs to a key derivation is a
PSA_KEY_DERIVATION_INPUT_SECRET passed with
psa_key_derivation_input_key(), forbid
psa_key_derivation_output_key(). It usually doesn't make sense to
derive a key object if the secret isn't itself a proper key.
After passing some inputs, try getting one byte of output, just to
check that this succeeds (for a valid sequence of inputs) or fails
with BAD_STATE (for an invalid sequence of inputs). Either output a
1-byte key or a 1-byte buffer depending on the test data.
The test data was expanded as follows:
* Output key type (or not a key): same as the SECRET input if success
is expected, otherwise NONE.
* Expected status: PSA_SUCCESS after valid inputs, BAD_STATE after any
invalid input.
Allow a direct input as the SECRET input step in a key derivation, in
addition to allowing DERIVE keys. This makes it easier for
applications to run a key derivation where the "secret" input is
obtained from somewhere else. This makes it possible for the "secret"
input to be empty (keys cannot be empty), which some protocols do (for
example the IV derivation in EAP-TLS).
Conversely, allow a RAW_DATA key as the INFO/LABEL/SALT/SEED input to a key
derivation, in addition to allowing direct inputs. This doesn't
improve security, but removes a step when a personalization parameter
is stored in the key store, and allows this personalization parameter
to remain opaque.
Add test cases that explore step/key-type-and-keyhood combinations.
This commit only makes derive_input more flexible so that the key
derivation API can be tested with different key types and raw data for
each input step. The behavior of the test cases remains the same.
Exercise the library functions with calloc returning NULL for a size
of 0. Make this a separate job with UBSan (and ASan) to detect
places where we try to dereference the result of calloc(0) or to do
things like
buf = calloc(size, 1);
if (buf == NULL && size != 0) return INSUFFICIENT_MEMORY;
memcpy(buf, source, size);
which has undefined behavior when buf is NULL at the memcpy call even
if size is 0.
This is needed because other test components jobs either use the system
malloc which returns non-NULL on Linux and FreeBSD, or the
memory_buffer_alloc malloc which returns NULL but does not give as
useful feedback with ASan (because the whole heap is a single C
object).
The uint32 is given as a bigendian stream, in the tests, however,
the char buffer that collected the stream read it as is,
without converting it. Add a temporary buffer, to call `greentea_getc()`
8 times, and then put it in the correct endianity for input to `unhexify()`.
Reduce the stack usage of the `test_suite_pkcs1_v21` by reducing the
size of the buffers used in the tests, to a reasonable big enough size,
and change the size sent to the API to sizeof output.
Reduce the stack usage of the `test_suite_rsa` by reducing the
size of the buffers used in the tests, to a reasonable big enough size,
and change the data size to decrypt in the data file.
* origin/pr/2765: (28 commits)
Add set+get tests
Consolidate tests for set with/without values
config.py testing: also test the get command
Compatibility redirect: add copyright notice
Compatibility redirect: if python3 is not available, try python
Fix config.py output when a symbol has acquired or lost a value
Remove redundant test case
cmake: update interpreter requirement for the test suite generator
cmake: fix Python requirement
Test script for config.py
Documentation improvements
Fix "#define ... not found" error when using the default file name
Fix "--force set" without a value sneaking a None in
Fix --force requiring an argument
Fix Config.unset() making the name known
Also search config.h near the script
Report an error if switching to Python fails
Fix 'config.py set' without --force
Fix encoding errors
Print help when invoked with no arguments
...
The current test generator code accepts multiple colons as a
separator, but this is just happenstance due to how the code, it isn't
robust. Replace "::" by ":", which is more future-proof and allows
simple separator-based navigation.
Make check-test-cases.py pass.
Prior to this commit, there were many repeated test descriptions, but
none with the same test data and dependencies and comments, as checked
with the following command:
for x in tests/suites/*.data; do perl -00 -ne 'warn "$ARGV: $. = $seen{$_}\n" if $seen{$_}; $seen{$_}=$.' $x; done
Wherever a test suite contains multiple test cases with the exact same
description, add " [#1]", " [#2]", etc. to make the descriptions
unique. We don't currently use this particular arrangement of
punctuation, so all occurrences of " [#" were added by this script.
I used the following ad hoc code:
import sys
def fix_test_suite(data_file_name):
in_paragraph = False
total = {}
index = {}
lines = None
with open(data_file_name) as data_file:
lines = list(data_file.readlines())
for line in lines:
if line == '\n':
in_paragraph = False
continue
if line.startswith('#'):
continue
if not in_paragraph:
# This is a test case description line.
total[line] = total.get(line, 0) + 1
index[line] = 0
in_paragraph = True
with open(data_file_name, 'w') as data_file:
for line in lines:
if line in total and total[line] > 1:
index[line] += 1
line = '%s [#%d]\n' % (line[:-1], index[line])
data_file.write(line)
for data_file_name in sys.argv[1:]:
fix_test_suite(data_file_name)
A test case for 32+0 was present three times, evidently overeager
copy-paste. Replace the duplicates by test cases that read more than
32 bytes, which exercises HKDF a little more (32 bytes is significant
because HKDF-SHA-256 produces output in blocks of 32 bytes).
I obtained the test data by running our implementation, because we're
confident in our implementation now thanks to other test cases: this
data is useful as a non-regression test.
There should have been a good-saltlen test case and a bad-saltlen test
case for both sizes 522 and 528, but the 522-bad-saltlen test case was
missing and the 528-good-saltlen test case was repeated. Fix this.
Don't use semicolons in test case descriptions. The test outcome file
is a semicolon-separated CSV file without quotes to keep things
simple, so fields in that file may not contain semicolons.
The tests were not covering get for a symbol with a value. No symbol
has an uncommented value in the default config.h. (Actually there's
_CRT_SECURE_NO_DEPRECATE, but that's a bit of a hack that this script
is not expected to handle, so don't use it).
Add tests of "get FOO" after "set FOO" and "set FOO value", so that we
have coverage for "get FOO" when "FOO" has a value.
We currently test setting a symbol with a value even if it didn't
originally had one and vice versa. So there's no need to have separate
lists of symbols to test with. Just test everything we want to test
with each symbol.
Set MBEDTLS_TEST_PLATFORM and MBEDTLS_TEST_CONFIGURATION to meaningful
values in all.sh. These environment variables are used when
writing an outcome file, which happens if MBEDTLS_TEST_OUTCOME_FILE is
also set.
When running one of the try-multiple-configuration scripts, set
MBEDTLS_TEST_CONFIGURATION to a value that uniquely describes the
configuration.
Don't use semicolons in test case descriptions. The test outcome file
is a semicolon-separated CSV file without quotes to keep things
simple, so fields in that file may not contain semicolons.
If the environment variable MBEDTLS_TEST_OUTCOME_FILE is set, then for
each test case, write a line to the file with the given name, of the
form
PLATFORM;CONFIGURATION;ssl-opt;TEST CASE DESCRIPTION;PASS/FAIL/SKIP;CAUSE
PLATFORM and CONFIGURATION come from the environment variables
MBEDTLS_TEST_PLATFORM and MBEDTLS_TEST_CONFIGURATION. If these
variables are unset, the script uses some easily-calculated values.
If the environment variable MBEDTLS_TEST_OUTCOME_FILE is set, then for
each test case, write a line to the file with the given name, of the
form
PLATFORM;CONFIGURATION;TEST SUITE;TEST CASE DESCRIPTION;PASS/FAIL/SKIP;CAUSE
PLATFORM and CONFIGURATION come from the environment variables
MBEDTLS_TEST_PLATFORM and MBEDTLS_TEST_CONFIGURATION.
Errors while writing the test outcome file are not considered fatal,
and are not reported except for an error initially opening the file.
This is in line with other write errors that are not checked.
This commit adds multiple test cases to the X.509 CRT parsing test suite
exercising the stack's behaviour when facing CertificatePolicy extensions
that are malformed for a variety of reasons. It follows the same scheme
as in other negative parsing tests: For each ASN.1 component, have test
cases for (a) unexpected tag, (b) missing length, (c) invalid length
encoding, (d) length out of bounds.
This commit modifies the test
X509 CRT ASN1 (TBSCertificate v3, inv CertificatePolicies, data missing)
which exercises the behaviour of the X.509 CRT parser when facing a
CertificatePolicy extension with empty data field.
The following adaptations are made:
- The subject ID and issuer ID are modified to have length 0.
The previous values `aa` and `bb` are OK, but a generic ASN.1
parser will try to interpret them as ASN.1 tags and fail. For
maintainability, it's therefore better to use something that
can be parsed as ASN.1, and an empty ID is the easiest solution
here.
- The TBS part of the certificate wasn't followed by signature
algorithm and signature fields, which makes the test incompatible
with future changes swapping to breadth-first parsing of
certificates.
This commit moves the X.509 negative parsing tests for the
CertificatePolicy extension to the place where negative
testing of other extensions happens.
Judging from its name, the purpose of the test
TBSCertificate v3, ext CertificatePolicies tag, bool len missing
in test_suite_x509parse.data is to exercise the X.509 parsing stack's
behaviour when parsing a CertificatePolicy extension which lacks the
length field of the boolean 'Criticality' value.
However, the test fails at an earlier stage due to a mismatch of inner
and outer length of the explicit ASN.1 extensions structure.
Since we already have tests exercising
- mismatch of inner and outer length in the extensions structure, namely
'X509 CRT ASN1 (TBS, inv v3Ext, inner tag invalid)'
- missing length of the 'Criticality' field in an extension, namely
'X509 CRT ASN1 (TBS, inv v3Ext, critical length missing)'
and since for both tests there's no relevance to the use of the
policy extension OID, the test
'TBSCertificate v3, ext CertificatePolicies tag, bool len missing'
can be dropped.
The signature must have exactly the same length as the key, it can't
be longer. Fix#258
If the signature doesn't have the correct size, that's an invalid
signature, not a problem with an output buffer size. Fix the error code.
Add test cases.
Normally a valueless symbol remains valueless and a symbol with a
value keeps having one. But just in case a symbol does get changed
from valueless to having a value, make sure there's a space between
the symbol and the value. And if a symbol gets changed from having a
value to valueless, strip trailing whitespace.
Add corresponding tests.
Also fix the case of a valueless symbol added with the set method,
which would have resulted in attempting to use None as a string. This
only happened with the Python API, not with the command line API.
The test suite generator has been a Python script for a long time,
but tests/CMakeLists.txt still looked for Perl. The reference to
PYTHON_INTERP only worked due to a call to find_package(PythonInterp)
in the toplevel CMakeLists.txt, and cmake would not have printed the
expected error message if python was not available.
Run config.py with various options and store the results in files.
This script also supports the now-removed config.pl.
This is a framework to run non-regression tests on config.py: run it
with the old version, run it with the new version, and compare the
output.
This is deliberately not a functional test suite so that we don't need
to maintain a set of known outputs. When something changes in
config.py (or config.h), run the script before, run it after, and
check manually whether any differences in the output are acceptable.
git grep -Fl /config.pl | xargs sed -i -e 's!/config\.pl!/config.py!g'
Also:
* Change one comment in include/mbedtls/check_config.h.
* Change PERL to PYTHON in CMakeLists.txt.
In psa_asymmetric_sign, immediately reject an empty signature buffer.
This can never be right.
Add test cases (one RSA and one ECDSA).
Change the SE HAL mock tests not to use an empty signature buffer.
Add tests for derivation.
Test both 7 bits and 9 bits, in case the implementation truncated the
bit size down and 7 was rejected as 0 rather than because it isn't a
multiple of 8.
There is no corresponding test for import because import determines
the key size from the key data, which is always a whole number of bytes.
* origin/pr/2469:
Enable MBEDTLS_MEMORY_DEBUG in memory buffer alloc test in all.sh
Remove unnecessary memory buffer alloc unsets
Disable DTLS proxy tests for MEMORY_BUFFER_ALLOC test
all.sh: restructure memory allocator tests
Add missing dependency in memory buffer alloc set in all.sh
Don't set MBEDTLS_MEMORY_DEBUG through `scripts/config.pl full`
Add cfg dep MBEDTLS_MEMORY_DEBUG->MBEDTLS_MEMORY_BUFFER_ALLOC_C
Fix memory leak in CSR test suite on failure
Fix a memory leak in x509write test suite
Add all.sh run with full config and ASan enabled
Add all.sh run with MBEDTLS_MEMORY_BUFFER_ALLOC_C enabled
Update documentation of exceptions for `config.pl full`
Adapt all.sh to removal of buffer allocator from full config
Disable memory buffer allocator in full config
Check dependencies of MBEDTLS_MEMORY_BACKTRACE in check_config.h
Tweak test data for one test case to not rely on mbedtls_asn1_get_int
lacking support for leading zeros. Instead, use a number that is
actually out of range for int.
Tweak test data for one test case to not rely on
mbedtls_asn1_get_bitstring_null rejecting bitstrings shorter than two
octets. Instead, try bit strings that are genuinely invalid, or have a
nonzero number of unused bits.
Add a test case with a correct empty signature. This is commented out
because asn1parse currently does not support this. Uncomment it when
asn1parse is updated to support this.
The new macro ASSERT_ALLOC_WEAK does not fail the test case if the
memory allocation fails. This is useful for tests that allocate a
large amount of memory, but that aren't useful on platforms where
allocating such a large amount is not possible.
Ideally this macro should mark the test as skipped. We don't yet have
a facility for that but we're working on it. Once we have a skip
functionality, this macro should be changed to use it.
Use the test-many-sizes framework for string writes as
well (previously, it was only used for booleans and integers). This
way, more edge cases are tested with less test code.
This commit removes buffer overwrite checks. Instead of these checks,
run the test suite under a memory sanitizer (which we do in our CI).
Omit negative integers and MPIs that would result in values that look
like negative INTEGERs, since the library doesn't respect the
specifications there, but fixing it has a serious risk of breaking
interoperability when ASN.1 is used in X.509 and other
cryptography-related applications.
Add self-contained ASN.1 parsing tests, so that ASN.1 parsing is not
solely tested through X.509 and TLS.
The tests cover every function and almost complete line coverage in
asn1parse.c.
A few test cases containing negative and edge case INTEGER values are
deliberately deactivated because the historical library behavior is at
odds with official specifications, but changing the behavior might
break interoperability.
Other than that, these tests revealed a couple of minor bugs which
will be fixed in subsequent commits.
Add infrastructure to run unit tests and collect the return values for
every PSA API function that returns psa_status_t.
./tests/scripts/psa_collect_statuses.py >statuses.txt
This leak wasn't discovered by the CI because the only test in
all.sh exercising the respective path enabled the custom memory
buffer allocator implementations of calloc() and free(), hence
bypassing ASan.
With the removal of MBEDTLS_MEMORY_BUFFER_ALLOC_C from the
full config, there are no tests for it remaining in all.sh.
This commit adds a build as well as runs of `make test` and
`ssl-opt.sh` with MBEDTLS_MEMORY_BUFFER_ALLOC_C enabled to all.sh.
Previously, numerous all.sh tests manually disabled the buffer allocator
or memory backtracting after setting a full config as the starting point.
With the removal of MBEDTLS_MEMORY_BACKTRACE and MBEDTLS_MEMORY_BUFFER_ALLOC_C
from full configs, this is no longer necessary.
* crypto/development: (77 commits)
all.sh: disable MEMORY_BUFFER_ALLOC in cmake asan build
Unify gcc and clang cmake flags to test with UBsan
Add an input check in psa_its_set
Remove storage errors from psa_generate_random
Update getting_started.md
Update based on Jaeden's comments.
Update getting_started.md
Fix return code warnings
Update getting_started.md
Fix warnings
Add PSA_ERROR_STORAGE_FAILURE to psa_cipher_generate_iv
Remove errorneous insert
Add STORAGE_FAILURE everywhere + add missing codes
Add storage failure to psa_mac_verify_finish
Add storage failure to psa_mac_sign_finish
Add PSA_ERROR_STORAGE_FAILURE to psa_aead_*_setup functions
Added PSA_ERROR_BAD_STATE to functions with operations
Added extra bad state case to psa_hash_setup
Add missing return codes to psa_generate_key
Add PSA_ERROR_BUFFER_TOO_SMALL to psa_mac_compute
...
* origin/development:
Fix copypasta in msg
When not using PSA crypto, disable it
Disable MEMORY_BUFFER_ALLOC with ASan
Remove config.pl calls with no effect
ssl-opt.sh: wait for proxy to start before running the script further
Adapt ChangeLog
Fix mpi_bigendian_to_host() on bigendian systems
* origin/pr/2771:
Fix copypasta in msg
When not using PSA crypto, disable it
Disable MEMORY_BUFFER_ALLOC with ASan
Remove config.pl calls with no effect
