Add support for supported block modes using the PSA crypto config.
These are mapped to Mbed TLS config options as best as possible.
Signed-off-by: David Brown <david.brown@linaro.org>
Update the psa/crypto_config.h with the newly defined PSA_WANT_
definitions for symmetric ciphers and block modes.
Signed-off-by: David Brown <david.brown@linaro.org>
There was some intentional duplication between
library/psa_crypto_random_impl.h and include/mbedtls/psa_util.h, with
the intent that the compiler would complain if one file was edited in
a way that's incompatible with the other file. However, the two files
were never included together, and in fact could not be included
together because some definitions can't be duplicated (type, static
variable).
Now library/psa_crypto_random_impl.h includes
include/mbedtls/psa_util.h, so the compiler will check what it can.
There is less redundancy since it isn't always possible to declare
something twice (specifically, types can't be declared).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Make sure MBEDTLS_PSA_CRYPTO_CLIENT is defined
when MBEDTLS_PSA_CRYPTO_C is defined and guard
PSA client code only with MBEDTLS_PSA_CRYPTO_CLIENT.
The definition of MBEDTLS_PSA_CRYPTO_CLIENT is done
in crypto_types.h before the definition of
psa_key_attributes_t. That way as PSA crypto client
code is related to key attributes we can be quite
confident that MBEDTLS_PSA_CRYPTO_CLIENT will be
defined when needed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Attempting to create an ECC key with a curve specification that is not
valid can plausibly fail with PSA_ERROR_INVALID_ARGUMENT ("this is not
a curve specification at all") or PSA_ERROR_NOT_SUPPORTED ("this may
be a curve specification, but not one I support"). The choice of error
is somewhat subjective.
Before this commit, due to happenstance in the implementation, an
attempt to use a curve that is declared in the PSA API but not
implemented in Mbed TLS returned PSA_ERROR_INVALID_ARGUMENT, whereas
an attempt to use a curve that Mbed TLS supports but for which support
was disabled at compile-time returned PSA_ERROR_NOT_SUPPORTED. This
inconsistency made it difficult to write negative tests that could
work whether the curve is implemented via Mbed TLS code or via a
driver.
After this commit, any attempt to use parameters that are not
recognized fails with NOT_SUPPORTED, whether a curve with the
specified size might plausibly exist or not, because "might plausibly
exist" is not something Mbed TLS can determine.
To keep returning INVALID_ARGUMENT when importing an ECC key with an
explicit "bits" attribute that is inconsistent with the size of the
key material, this commit changes the way mbedtls_ecc_group_of_psa()
works: it now works on a size in bits rather than bytes, with an extra
flag indicating whether the bit-size must be exact or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename the enum constants TLS12_PRF_xxx, which are declared in a
public header but not intended for use in application code, to start
with MBEDTLS_PSA_.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
- Fixed code style.
- Clarified the documentation of what happens when saltlen is set to
MBEDTLS_RSA_SALT_LEN_ANY.
- Added range check on saltlen to reject out of range values.
(Code review done by @gilles-peskine-arm)
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
extension of mbedtls_rsa_rsassa_pss_sign() with an extra argument
'saltlen' which allows to inject the length of the salt to the function,
as opposed to the original function which internally computes the
maximum possible salt length. If MBEDTLS_RSA_SALT_LEN_ANY is passed
the function falls back to the the original behaviour. The original
function mbedtls_rsa_rsassa_pss_sign() can simply defer to it.
This allows to make some CAVP PSS generation tests that require the use
of a salt length which is smaller that the hash length.
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
Some of the material was originally the PSA specification, and
discusses how different implementations might behave. Replace such
statements by a description of how Mbed TLS behaves.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It's about who has access to the key material in plaintext, not directly
where the operation is performed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Executed ./scripts/bump_version.sh --version 2.25.0 --so-crypto 6
Increasing the SO version of the crypto library, because the openless
API improvement came with API/ABI incompatibilities. For example
- the size of psa_key_handle_t changed
- the type of a parameter in 18 public functions has changed from
psa_key_handle_t to mbedtls_svc_key_id_t
Signed-off-by: Janos Follath <janos.follath@arm.com>
This algorithm replaces the pre-existing stream cipher algorithms.
The underlying stream cipher is determined by the key type.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This temporarily breaks all.sh '*deprecated*' (deprecated functions still used
in the library), which will be fix in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Work in progress: next steps are to implement and test it.
Compared to the existing non-ext version:
- to separate tag parameter
- explicit output_len parameter
Also, this version will retain support for NIST_KW (hence documents it), while
the non-ext version will lose it in a few commits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- Document constraints on buffers/pointers NULLability explicitly.
- Simplify terminology around IV/nonce: all AEADs implemented so far call that
a nonce. Keep the parameter names (iv, iv_len) to avoid having to change the
code (or having different names in the header and C files).
- Align documentation to the code regarding parameter constraints: the
documentation said the for ciphers with fixed nonce/tag length, the
iv_len/tag_len arguments were ignored, while the code enforced them to be the
expected value. This is more consistent with what's done with GCM/CCM, which
for tag_len for example accept more than one value, but from a relatively
small set, and will return errors for values outside that set. Accepting a
single value is a particular case of that (the set of acceptable value only
has one element).
Don't document behaviour with NIST KW as we're about to change that.
Note: this function is currently only defined if at least one of GCM, CCM or
ChachaPoly is enabled, even though it's supposed to handle NIST KW as well. No
need to fix this as the function will soon no longer support NIST KW.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Removed unecessary checks on the ALG_SHA_224 and ALG_SHA_384 since
those are handled in config_psa.h by ensuring the correct _C is
included. Reformatted config_psa.h to be alphabetical and made the
assignments line up correctly for consistency. Fixed the guards
for ALG_SHA_224 and ALG_SHA_384 to be correct in the crypto library
source.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The driver interfaces described in crypto_accel_driver.h and
crypto_entropy_driver.h are no longer being worked on. We do not
intend to finish the design of these interfaces or to implement them
in Mbed TLS. They have been superseded by the unified driver
interface (docs/proposed/psa-driver-interface.md), which is being
actively worked on both to finalize the specification and to implement
it in Mbed TLS.
The partially implemented dynamic secure element interface is staying
for now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Due to a misplaced #endif, the (non-functional) macro definitions were
not properly removed from crypto_compat.h if MBEDTLS_DEPRECATED_REMOVED
was declared.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
When MBEDTLS_PSA_CRYPTO_CONFIG is disabled, if an Mbed TLS crypto
feature is enabled, declare the corresponding PSA feature as enabled,
in addition to enabling its software implementation. This is necessary
for code that uses PSA APIs and relies on PSA_WANT_xxx symbols to know
which features are enabled (application code, our library code using
MBEDTLS_USE_PSA_CRYPTO, our test dependencies, etc.).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ctr_drbg_set_reseed_interval() and
mbedtls_hmac_drbg_set_reseed_interval() can now be called before
their seed functions and the reseed_interval value will persist.
Previously it would be overwritten with the default value.
*_drbg_reseed_interval is now set in init() and free().
mbedtls_ctr_drbg_free() and mbedtls_hmac_drbg_free() now
reset the drbg context to the state immediately after init().
Tests:
- Added test to check that DRBG reseeds when reseed_counter
reaches reseed_interval, if reseed_interval set before seed
and reseed_interval is less than MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
Signed-off-by: gacquroff <gavina352@gmail.com>
The return values of the functions are updated in the documetation.
All possible return values are added including nested functions' return
values. The values which cannot be returned are removed.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
If the file is read correctly, but it contains data that isn't valid,
the crypto storage code returns PSA_ERROR_DATA_INVALID.
The PSA_ERROR_DATA_CORRUPT and PSA_ERROR_STORAGE_FAILURE error codes are
replaced with PSA_ERROR_DATA_INVALID, except in the ITS subsystem.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Note that the implementation here is just a sample, and integrators
are expected to replace it with whatever they need.
But do try to supply a definition that can be somewhat useful (give
room for pointer+size).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We generate the Doxygen documentation in a configuration where part of
config.h is excluded. See
https://github.com/ARMmbed/mbedtls/issues/520
```
/var/lib/build/include/mbedtls/config.h:3635: warning: documentation for unknown define MBEDTLS_PSA_HMAC_DRBG_MD_TYPE found.
```
This is a more general issue and fixing it is out of scope of my
current work. Therefore, just do something simple to silence Doxygen,
and never mind that this causes the documentation of
`MBEDTLS_PSA_HMAC_DRBG_MD_TYPE` to be omitted from the rendered
documentation. We'll fix that when we fix all the configuration macros
with a similar problem.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Allow the user to configure PSA to use HMAC_DRBG even if CTR_DRBG is
available, or to explicitly select the hash algorithm to use for
HMAC_DRBG, by setting MBEDTLS_PSA_HMAC_DRBG_MD_TYPE in config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support using HMAC_DRBG instead of CTR_DRBG in the PSA subsystem.
Use HMAC_DRBG if CTR_DRBG is available. Choose between SHA-256 and
SHA-512 based on availability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Implement support for MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG.
For test purposes, write an implementation that uses libc rand().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Define a sample type mbedtls_psa_external_random_context_t in
psa/crypto_platform.h and define the prototype of
mbedtls_psa_external_get_random() in a public header.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a configuration option for autonomous random drivers, i.e. PSA
crypto drivers that provide a random generator, that have their own
entropy source and do not support injecting entropy from another
source.
This commit only creates the configuration option. Subsequent commits
will add the implementation and tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename functions to get a key slot:
. to make their naming more consistent
. to emphasize that those functions set a lock on the
key slot they return to protect it from being wiped
out and re-used while some part of the library
is accessing it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Moved new check_crypto_config.h file from include/psa to library
directory and the file is now included from *.c instead of the
crypto_config.h file. Fixed guards in PSA crypto library based
on review comments for new PSA crypto config features.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Moved from doing the dependency checks for MBEDTLS_PSA_BUILTIN to
checking the PSA_WANT macros for the dependency checks. This required
moving the file into the include/psa directory and having the file be
included by crypto_config.h instead of config_psa.h.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Revised the placement of various new MBEDTLS_PSA_BUILTIN_xxx
guards based on review comments. Corrected guards in psa
test driver to use _ACCEL version instead of _BUILTIN version.
Updated check_config_psa.h to include additional dependency checks
for more algorithms. Renamed some of the new tests to be a little
more clear on the purpose.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Add a counter of unaccessed slots and use it
in tests to check that at the end of PSA tests
all key slot are unaccessed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add the mbedtls_set_key_owner_id API,
API specific to the MbedTLS PSA implementation.
The API allows to define the owner of
volatile keys.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Code under MBEDTLS_USE_PSA_CRYPTO define is PSA client
code intended to use key identifiers of type psa_key_id_t.
Thus the MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
configuration option is incompatible with
MBEDTLS_USE_PSA_CRYPTO.
State this in config.h and check_config.h.
As a consequence:
. remove MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER from
the full configuration, as MBEDTLS_USE_PSA_CRYPTO is
part of it.
. add a new component in all.sh to keep testing the
library when MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
is set.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move all the PSA crypto APIs using key handles
to use key identifiers but psa_key_open() and
psa_key_close(). This is done without modifying
any test as key handles and key identifiers are
now the same.
Update the library modules using PSA crypto APIs
to get rid of key handles.
Programs and unit tests are updated to not use
key handles in subsequent commits, not in this
one.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Updated macros in config_psa.h that used ECC_xxx to use KEY_TYPE_ECC_xxx
per comments from review. Implemented a check_config_psa.h to help with
dependency checking of features enabled in config_psa.h. Added
check_config_psa.h to visual studio project.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In order to pass existing tests like test_psa_crypto_config_basic
and test_psa_crypto_config_no_driver, all the new features need
to be enabled in the default crypto_config.h file. This change
enables those features by default and updates the other new
tests to compensate for everything being enabled by disabling
some features for some of the tests as needed.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In the original attempt to add RSA support to PSA crypto config was too
generic. This set of changes adds support for the following RSA features:
PSA_WANT_ALG_RSA_PKCS1V15_CRYPT, PSA_WANT_ALG_RSA_PKCS1V15_SIGN,
PSA_WANT_ALG_RSA_OAEP, PSA_WANT_ALG_RSA_PSS, PSA_WANT_KEY_TYPE_RSA_KEY_PAIR,
and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY.
There were also some updates to ensure the proper inclusion of PSA crypto
library code when certain features are enabled. These updates were made to
address warnings and errors in builds from the new tests for these
features being added for PSA crypto configuration.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The KEY_TYPE_ECC_KEY_PAIR and KEY_TYPE_ECC_PUBLIC_KEY were previously
being guarded by MBEDTLS_ECP_C in the PSA crypto library code. This change
moves it to the new MBEDTLS_PSA_BUILTIN_xxx and separates KEY_PAIR
and PUBLIC_KEY as needed. Tests have also been added to validate the new
settings.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
This phase adds in support for the following features being
added to the list of features that can be configured in the
include/psa/crypto_config.h header file using the PSA_WANT_ALG_xxx
macros: ECDH, HMAC, HKDF, and RSA. These changes include changes to
the PSA crypto library to use the appropriate new guards that
will allow the feature to be compiled in or out either using
new PSA_WANT_ALG_xxx or the previous MBEDTLS_xxx macros.
For HKDF and HMAC, most of the PSA library code did not have a
specific matching MBEDTLS_xxx macro for that feature, but was instead
using the generic dependent MBEDTLS_MD_C macro. The ECDH and RSA
features more closely aligned with a direct replacement with a similar
macro.
The new tests for RSA, HMAC, and HKDF would normally unset additional
dependent macros, but when attempting to implement that level of
testing it required removal of too many core features like MD_C, PK_C,
ECP_C and other low level features. This may point to additional phases of
work to complete the transition of these features to the new model.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Document that enabling MBEDTLS_PSA_CRYPTO_CONFIG requires including
mbedtls/config_psa.h from the configuration file (mbedtls/config.h or
MBEDTLS_USER_CONFIG_FILE).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In old-style configuration, do not include mbedtls/config_psa.h from
mbedtls/config.h.
The inclusion should not and did not break any code, but it caused our
testing to miss a break of backward compatibility (fixed in "Include
config_psa.h from psa/crypto.h"). If users have their own config.h
which enabled MBEDTLS_PSA_CRYPTO_C and worked prior to the creation of
config_psa.h and MBEDTLS_PSA_CRYPTO_CONFIG, their config.h must keep
working. By including config_psa.h from config.h in the legacy case,
we weren't testing the legacy configuration mechanism adequately.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When the new PSA crypto configuration mechanism MBEDTLS_PSA_CRYPTO_CONFIG
is disabled, legacy configurations must keep working, even if they don't
include the new header file mbedtls/config_psa.h. Code that uses or
implements PSA crypto interfaces needs some of the symbols defined by the
new header file. Therefore, include the new header file via PSA crypto
headers, which are included everywhere mbedtls/config_psa.h is needed.
Include it early, in psa/crypto_platform.h, just after including
mbedtls/config.h, so that its symbols are available wherever the symbols
from mbedtls/config.h is available.
This fixes the unit tests with configs/config-psa-crypto.h: some unit
tests were failing, revealing that library features controlled with
the new symbols were no longer getting built.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit defines the following new macros added to the PSA Crypto API
between versions 1.0 beta 3 and 1.0.0 final:
PSA_AEAD_NONCE_LENGTH
PSA_AEAD_NONCE_MAX_SIZE
PSA_CIPHER_IV_LENGTH
PSA_CIPHER_IV_MAX_SIZE
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Use the export keys functionality, to call the public API
`mbedtls_ssl_tls_prf()`, and remove the function
`mbedtls_ssl_get_dtls_srtp_key_material()`.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Add a comment that describes that the feature only supportes the
`use_srtp` extension, and not hte full DTLS-SRTP RFC.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Improve readability of the code:
1. move common code to `ssl_internal.h` as `static inline`.
2. Add comments.
3. Use local variables for extension size.
4. Change function signature, by adding buffer size and output length.
5. Take server srtp profile out of the loop.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Fix compilation errors when `MBEDTLS_DTLS_SRTP` not set
1. Add file missed in previous commmit.
2. In sample applications, set `DFL_FORCE_SRTP_PROFILE` to 0.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Make the key material length in mbedtls_ssl_get_dtls_srtp_key_material
to be in\out, like it is done all over the library
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Add check for prerequisites in check_config.h
2. Add mki value to use_srtp extension
3. address some review comments
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
In the PSA crypto library, the code for verification of ECDSA is the same for
both MBEDTLS_PSA_BUILTIN_ALG_ECDSA and
MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA. So, the guards should allow for
either one to enable the code blocks. The original implementation only had
the check for ECDSA. In order to make this work, config_psa.h was updated
to ensure when MBEDTLS_CRYPTO_CONFIG is disabled, the setting for DETERMINISTIC
is only updated if MBEDTLS_ECDSA_C is also enabled.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Ensure that MBEDTLS_ECDSA_C is set when PSA_WANT_ALG_DETERMINISTIC_ECDSA
is requested. Also added MBEDTLS_ECDSA_C to the requirements comment in
config.h for MBEDTLS_ECDSA_DETERMINISTIC.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
When the PSA crypto features need to be setup based on the
PSA_WANT_xxx macros, the dependent features also need to be
enabled. This change corrects that for the MBEDTLS_ECDSA_DETERMINISTIC.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The psa crypto library was generically using PSA_WANT_ALG_xxx, but
should have been using the correct MBEDTLS_PSA_BUILTIN_ALG_xxx
definition since that code is the builtin version. There were also
a couple of spots that needed to ensure the code block was enabled
for either ECDSA or DETERMINISTIC_ECDSA, not just one of them.
Fixed all the new ALG_ECDSA_DETERMINISTIC names to be
ALG_DETERMINISTIC_ECDSA instead.
Fixed test to use correct definitions.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Need to make sure the new MBEDTLS_PSA_ACCEL_XXX defines are not checked
since they should be defined by the PSA driver. Updated the list-macros.sh
script to modify the instances of those found to match the corresponding
MBEDTLS_PSA_BUILTIN_XXX that are defined in config_psa.h
Fixed definition of MBEDTLS_PSA_BUILTIN_ALG_ECDSA_DETERMINISTIC, name was
incorrect. Also fixed a missing space in the comments of crypto_config.h
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Provided more detailed documentation for crypto_config.h file so it
is clear to users can enable cryptographic mechanisms using
PSA_WANT_XXX. If MBEDTLS_PSA_CRYPTO_CONFIG is not set the settings in
this file are not used.
Ensure that defines used in this file are set to 1 and not simply defined
per the specification. Also removed the __cplusplus guards since they are
not needed for this file.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Provied a more detailed description for the config_psa.h header file.
This new description makes it clear that the file should not be edited
by users or integrators. Relevant changes should be made to
psa/crypto_config.h instead.
Fixed the logic for the inclusion of MBEDTLS_PSA_BUILTIN_XXX to be set
when PSA_WANT_ALG_XXX and MBEDTLS_PSA_ACCEL_ALG_XXX is not defined,
otherwise the MBEDTLS_XXX should be set.
Ensure that MBEDTLS_PSA_BUILTIN_XXX is set to 1 and not simply defined
per specification.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Provided detailed description for MBEDTLS_PSA_CRYPTO_CONFIG so that it is
more clear to the user when the feature should be enabled or disabled.
It also mentions where to look for PSA crypto config settings;
include/psa/crypto_config.h. Removed some other related comments that
were not necessary.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
With the new feature MBEDTLS_PSA_CRYPTO_CONFIG, needed to
add support that when the feature is disabled, if there
are defines like MBEDTLS_ECDSA_C defined, then the PSA_WANT_
equivalent define is also enabled. This ensures the guards in
the library psa_crypto will work properly.
Also fixed an error return code in the driver wrapper for cipher
encrypt setup so it will properly pass unit tests.
Ensured config.py full works properly with the new
MBEDTLS_PSA_CRYPTO_CONFIG, it should not be set when the full
option is used.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Originally, MBEDTLS_PSA_CRYPTO_CONFIG was being used to allow
inclusion of mbedlts/config_psa.h, but that needed to be updated
so that mbedtls/config_psa.h is always included and the definitions
specific to PSA configuration are now guarded by
MBEDTLS_PSA_CRYPTO_CONFIG. This will allow for the standard setup
to continue working while new PSA configuration items to also work.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Initial changes to PSA crypto core to support configuration
of ECDSA algorithm using PSA crypto configuration mechanism.
Guards using MBEDTLS_ECDSA_C and MBEDTLS_ECDSA_DETERMINISTIC have
been changed to be based off PSA_WANT_ALG_ECDSA and
PSA_WANT_ALG_ECDSA_DETERMINISTIC. Added new tests to all.sh to
confirm new settings are working properly. Current code does not
pass the tests since built in signature verification is not in place.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In order to test various PSA crypto settings the Requires section
needed updating to require MBEDTLS_PSA_CRYPTO_C or
MBEDTLS_PSA_CRYPTO_CONFIG.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In order to prepare for PSA cryptographic mechanism for conditional
inclusion of various modules, there needs to be some updates to
the mbedtls configuration to enable that feature to work. This initial
set of changes just lays the ground work and future changes will
implement the functional features.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Move key identifier related macros and functions from
crypto_types.h to crypto_values.h as the latter is
the intended file to put them in.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
* Reworked the cipher context once again to be more robustly defined
* Removed redundant memset
* Unified behaviour on failure between driver and software in cipher_finish
* Cipher test driver setup function now also returns early when its status
is overridden, like the other test driver functions
* Removed redundant test cases
* Added bad-order checking to verify the driver doesn't get called where
the spec says it won't.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Once an operation has been 'accepted' by a driver, the remainder is bound
to the same driver, since driver-specific context structs cannot be shared.
This provides a pretty good gate mechanism for the fallback logic, too.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This commit introduces the public macro MBEDTLS_MAX_KEY_LENGTH,
which evaluates to an upper bound for the key lengths of all enabled
ciphers, in Bytes.
This is analogous to the already existing macros MBEDTLS_MAX_IV_LENGTH
and MBEDTLS_MAX_BLOCK_LENGTH, which provide upper bounds for the IV
and block length, respectively.
For now, MBEDTLS_MAX_KEY_LENGTH is 32 Bytes by default, and 64 in case
XTS is enabled. This is a strict overapproximation for some restricted
configurations. Ideally, the upper bound should be calculated exactly
and automatically from the list of enabled ciphers. The same applies
to the existing macros MBEDTLS_MAX_IV_LENGTH and MBEDTLS_MAX_BLOCK_LENGTH,
though, and is left for future work.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Fix PSA code and unit tests for the unit tests
to pass with key identifiers encoding owner
identifiers.
The changes in PSA code just make the enablement
of key identifiers encoding owner identifiers
platform independent. Previous to this commit,
such key identifiers were used only in the case
of PSA SPM platforms.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename psa_key_owner_id_t to mbedtls_key_owner_id_t to
highlight that this is a Mbed TLS specific type and not
a type defined in the PSA Cryptography API specification.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As a volatile key identifier may have a non-zero owner
identifier, don't reset the key owner identifier (if any)
when setting a volatile lifetime for a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define always psa_key_id_t as defined in the PSA
Cryptography API specification independently of
whether the MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration file is set or not.
As a consequence, get rid of `psa_app_key_id_t` that is
not needed anymore.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of this commit and the following is for
psa_key_id_t to always be as defined by the PSA
Cryptography API specification.
Currently psa_key_id_t departs from its specification
definition when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration flag is set. In that configuration, it is set
to be equal to psa_key_file_id_t which in that configuration
encodes an owner identifier along the key identifier.
Type psa_key_file_id_t was meant to be the key identifier type
used throughout the library code. If
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is set it
includes both a key and owner identifier, otherwise it is
equal to psa_key_id_t.
It has not been the key identifier type throughout the
library so far because when the PSA Cryptography
specification was developped the library Doxygen
documentation was used to generate the PSA Cryptography API
specification thus the need to use psa_key_id_t and not
psa_key_file_id_t.
As this constraint does not hold anymore, move
to psa_key_file_id_t as the key identifier type throughout
the library code.
By the way, this commit updates the key identifier
initialization in the tests to be compatible with a
composit key identifier. A psa_key_id_make()
inline function is introduced to initialize key
identifiers (composit ot not) at runtime.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
`psa_key_file_id_t` was defined in `crypto_platform.h` and
not `crypto_types.h` even if it wasn't platform dependent
because back when the PSA Crypto Specification was put
together `crypto_types.h` was meant to contain only types
that were intended to make it to the specification. There
is not such constraint anymore thus move the definition
of `psa_key_file_id_t` to crypto_types.h.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
Currently the new component in all.sh fails because
mbedtls_ssl_cf_memcpy_offset() is not actually constant flow - this is on
purpose to be able to verify that the new test works.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In the documentation of lifetimes, replace language meant for the PSA
specification by language that is specifically about Mbed TLS. Reduce
the discussion of what could happen in other implementation, and
discuss what can and cannot happen in integrations of Mbed TLS.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Description referred to mbedtls_ssl_sent_t callback,
but the callback is named mbedtls_ssl_send_t.
Signed-off-by: Christopher Moynihan <christophm@gmail.com>
* development: (55 commits)
Log change as bugfix
Add changelog entry
Clarify updates to the persistent state in storage
With multiple applicable transparent drivers, the order is unspecified
Minor clarifications
Give some examples of purpsoses of pure-software transparent driver
Fix typos
Add a link to the PSA API specification
Explain locations vs lifetimes
Initialize key pointer in ecdh to NULL
Add buffer zeroization when ecp_write_key fails
Simplified key slot deletion
Style fixes
Use arc4random_buf instead of rand on NetBSD
Apply review feedback
Update open question section about public key storage
Remove the paragraph about declaring application needs
Change driver persistent data to a callback interface
Rework and expand key management in opaque drivers
Fix typos and copypasta
...
Mention explicitly that only DNS names are supported so far, and while at it
explain where the name is searched.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Replace the now-redundant internal curve type macros ECP_xxx by the
macros MBEDTLS_ECP__xxx_ENABLED which are declared in ecp.h.
Signed-off-by: Gilles Peskine <gilles.peskine@arm.com>
Document that mbedtls_ecp_muladd and mbedtls_ecp_muladd_restartable
are only implemented on short Weierstrass curves.
Exclude these functions at build time if no short Weierstrass curve
is included in the build. Before, these functions failed to compile in
such a configuration.
Signed-off-by: Gilles Peskine <gilles.peskine@arm.com>
Document in config.h, and enforce in check_config.h, that
MBEDTLS_ECDSA_C requires at least one short Weierstrass curve to be
enabled. A Montgomery curve is not enough.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This option allows to test the constant-flow nature of selected code, using
MemSan and the fundamental observation behind ctgrind that the set of
operations allowed on undefined memory by dynamic analysers is the same as the
set of operations allowed on secret data to avoid leaking it to a local
attacker via side channels, namely, any operation except branching and
dereferencing.
(This isn't the full story, as on some CPUs some instructions have variable
execution depending on the inputs, most notably division and on some cores
multiplication. However, testing that no branch or memory access depends on
secret data is already a good start.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The condition is a complex and repeated a few times. There were already some
inconsistencies in the repetitions as some of them forgot about DES.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
PSA_ALG_ECB_NO_PADDING came in to the PSA Crypto API spec v1.0.0, but
was not implemented yet in the mbed TLS implementation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Follow the PSA Crypto specification which was updated between 1.0 beta3
and 1.0.0.
Add corresponding test cases.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
mbedtls_ecp_write_key is a mirror function to mbedtls_ecp_read_key, which
writes a private key back into a byte buffer in the correct format.
This is a helpful convenience function, since the byte order is defined
differently between Montgomery and Weierstrass curves. Since this difference
is accounted for in mbedtls_ecp_read_key, it made sense to add
mbedtls_ecp_write_key for the purpose of abstracting this away such that
psa_export_key doesn't need to take byte order into account.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Executed "./scripts/bump_version.sh --version 2.23.0 --so-crypto 5"
A symbol has been removed from the mbedcrypto library since the last
release:
mbedtls_ecc_group_to_psa ( enum mbedtls_ecp_group_id grpid,
size_t* bits )
This is an ABI break and we need to increase the SO version.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Pass the "certificate policies" extension to the callback supplied to
mbedtls_x509_crt_parse_der_with_ext_cb() if it contains unsupported
policies. This allows the callback to fully replicate the behaviour
of the deprecated MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
configuration.
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
Also normalize the first line of the copyright headers.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i '
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I {
i\
/*
s/^\// /
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! i\
* SPDX-License-Identifier: Apache-2.0\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
By convention, in the project, functions that have a
check or similar in the name return 0 if the check
succeeds, non-zero otherwise. Align with this for
mbedtls_ssl_chk_buf_ptr().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The case of MBEDTLS_ECP_RESTARTABLE isn't handled correctly yet: in that case
the DRBG instance should persist when resuming the operation. This will be
addressed in the next commit.
When both CTR_DRBG and HMAC_DRBG are available, CTR_DRBG is preferred since
both are suitable but CTR_DRBG tends to be faster and I needed a tie-breaker.
There are currently three possible cases to test:
- NO_INTERNAL_RNG is set -> tested in test_ecp_no_internal_rng
- it's unset and CTR_DRBG is available -> tested in the default config
- it's unset and CTR_DRBG is disabled -> tested in
test_ecp_internal_rng_no_ctr_drbg
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Invasive testing strategy
Create a new header `common.h`.
Introduce a configuration option `MBEDTLS_TEST_HOOKS` for test-specific code, to be used in accordance with the invasive testing strategy.
This is to avoid confusion with the class of macros
MBEDTLS_SSL_PROTO_TLS1_X
which have an underscore between major and minor version number.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
