Split the test function copy_key into two: one for success and one for
failure.
Add failure tests where the attributes specify an incorrect type or size.
Read extra data from the domain parameters in the attribute structure
instead of taking an argument on the function call.
Implement this for RSA key generation, where the public exponent can
be set as a domain parameter.
Add tests that generate RSA keys with various public exponents.
After calling psa_get_key_attributes(), call
psa_reset_key_attributes() if the key may have domain parameters,
because that's the way to free the domain parameter substructure in
the attribute structure. Keep not calling reset() in some places where
the key can only be a symmetric key which doesn't have domain
parameters.
Instead of passing a separate parameter for the key size to
psa_generate_key and psa_generator_import_key, set it through the
attributes, like the key type and other metadata.
Update persistent_key_load_key_from_storage to the new attribute-based
key creation interface. I tweaked the code a little to make it simpler
and more robust without changing the core logic.
With the attribute-based key creation API, it is no longer possible to
have a handle to a slot that does not hold key material. Remove all
corresponding tests.
Implement attribute querying.
Test attribute getters and setters. Use psa_get_key_attributes instead
of the deprecated functions psa_get_key_policy or
psa_get_key_information in most tests.
Implement the new, attribute-based psa_import_key and some basic
functions to access psa_key_attributes_t. Replace
psa_import_key_to_handle by psa_import_key in a few test functions.
This commit does not handle persistence attributes yet.
This commit starts a migration to a new interface for key creation.
Today, the application allocates a handle, then fills its metadata,
and finally injects key material. The new interface fills metadata
into a temporary structure, and a handle is allocated at the same time
it gets filled with both metadata and key material.
This commit was obtained by moving the declaration of the old-style
functions to crypto_extra.h and renaming them with the to_handle
suffix, adding declarations for the new-style functions in crypto.h
under their new name, and running
perl -i -pe 's/\bpsa_(import|copy|generator_import|generate)_key\b/$&_to_handle/g' library/*.c tests/suites/*.function programs/psa/*.c
perl -i -pe 's/\bpsa_get_key_lifetime\b/$&_from_handle/g' library/*.c tests/suites/*.function programs/psa/*.c
Many functions that are specific to the old interface, and which will
not remain under the same name with the new interface, are still in
crypto.h for now.
All functional tests should still pass. The documentation may have
some broken links.
Allow either the key derivation step or the key agreement step to
fail.
These tests should be split into three groups: key derivation setup
tests with an algorithm that includes a key agreement step, and
multipart key agreement failure tests, and raw key agreement failure
tests.
Merge the Mbed Crypto development branch a little after
mbedcrypto-1.0.0 into the PSA Crypto API 1.0 beta branch a little
after beta 2.
Summary of merge conflicts:
* Some features (psa_copy_key, public key format without
SubjectPublicKeyInfo wrapping) went into both sides, but with a few
improvements on the implementation side. For those, take the
implementation side.
* The key derivation API changed considerably on the API side. This
merge commit generally goes with the updated API except in the tests
where it keeps some aspects of the implementation.
Due to the divergence between the two branches on key derivation and
key agreement, test_suite_psa_crypto does not compile. This will be
resolved in subsequent commits.
Commit "Smoke-test operation contexts after setup+abort" replaced
{failed-setup; abort} sequences by {failed-setup; successful-setup}.
We want to test that, but we also want to test {failed-setup; abort}.
So test {failed-setup; abort; failed-setup; successful-setup}.
After a successful setup followed by abort, or after a failed setup
from an inactive state, a context must be usable. Test this for
hash, MAC and cipher contexts.
Calling psa_*_setup() twice on a MAC, cipher, or hash context should
result in a PSA_ERROR_BAD_STATE error because the operation has already
been set up.
Fixes#10
Extend hash bad order test in line with the new bad order tests for MAC
and cipher, covering more cases and making comments and test layout
consistent.
Ensure that when doing hash operations out of order, PSA_ERROR_BAD_STATE
is returned as documented in crypto.h and the PSA Crypto specification.
In multipart cipher tests, test that each step of psa_cipher_update
produces output of the expected length. The length is hard-coded in
the test data since it depends on the mode.
The length of the output of psa_cipher_finish is effectively tested
because it's the total output length minus the length produced by the
update steps.
The output length can be equal to the input length.
This wasn't noticed at runtime because we happened to only test with
CBC with the first chunk being a partial block.
Some calls to psa_cipher_finish or psa_cipher_update append to a
buffer. Several of these calls were not calculating the offset into
the buffer or the remaining buffer size correctly.
This did not lead to buffer overflows before because the buffer sizes
were sufficiently large for our test inputs. This did not lead to
incorrect output when the test was designed to append but actually
wrote too early because all the existing test cases either have no
output from finish (stream cipher) or have no output from update (CBC,
with less than one block of input).
Check generator validity (i.e. that alg has been initialized) before
allowing reads from the generator or allowing reads of the generator's
capacity.
This aligns our implementation with the documented error code behavior
in our crypto.h and the PSA Crypto API.
Test that freshly-initialized contexts exhibit default behavior through
the API. Do this without depending on the internal representation of the
contexts. This provides better portability of our tests on compilers
like MSVC.
For must-fail asymmetric decryption tests, add an output size parameter
so that tests can directly control what output buffer size they allocate
and use independently from the key size used. This enables better
testing of behavior with various output buffer sizes.
When RSA decrypting, unlike with RSA encrypting, we sometimes expect the
output length will be less than the key size. For instance, in the case
where the plaintext is zero-length we expect the output length of the
decryption to be zero-length as well, not key size in length.
For must-fail tests, we don't expect output-buffer-sized RSA-decryption,
only that the output length is less than or equal to the output size, so
these tests remain unchanged.
Change the must-pass tests to expect that the actual output size is
equal to the expected length of the output buffer instead of always
being the key size.
In one place, exercise_key was used in a such a way that if the test
failed inside exercise_key, the test suite would correctly report the
test as failed but would not report the exact location of the failure.
Fix this.
Add documentation for exercise_key that explains how to use it.
Split the testing into tests that exercise policies in
test_suite_psa_crypto and tests that exercise slot content (slot
states, key material) in test_suite_psa_crypto_slot_management.
Test various cases of source and target policies with and without
wildcards. Missing: testing of the policy constraint on psa_copy_key
itself.
Test several key types (raw data, AES, RSA). Test with the
source or target being persistent.
Add failure tests (incompatible policies, source slot empty, target
slot occupied).
Remove front matter from our EC key format, to make it just the contents
of an ECPoint as defined by SEC1 section 2.3.3.
As a consequence of the simplification, remove the restriction on not
being able to use an ECDH key with ECDSA. There is no longer any OID
specified when importing a key, so we can't reject importing of an ECDH
key for the purpose of ECDSA based on the OID.
Remove pkcs-1 and rsaEncryption front matter from RSA public keys. Move
code that was shared between RSA and other key types (like EC keys) to
be used only with non-RSA keys.
Remove the type and bits arguments to psa_allocate_key() and
psa_create_key(). They can be useful if the implementation wants to
know exactly how much space to allocate for the slot, but many
implementations (including ours) don't care, and it's possible to work
around their lack by deferring size-dependent actions to the time when
the key material is created. They are a burden to applications and
make the API more complex, and the benefits aren't worth it.
Change the API and adapt the implementation, the units test and the
sample code accordingly.
