Also, introduce MBEDTLS_EINTR locally in net_sockets.c
for the platform-dependent return code macro used by
the `select` call to indicate that the poll was interrupted
by a signal handler: On Unix, the corresponding macro is EINTR,
while on Windows, it's WSAEINTR.
Previously, the idling loop in ssl_server2 didn't check whether
the underlying call to mbedtls_net_poll signalled that the socket
became invalid. This had the consequence that during idling, the
server couldn't be terminated through a SIGTERM, as the corresponding
handler would only close the sockets and expect the remainder of
the program to shutdown gracefully as a consequence of this.
This was subsequently attempted to be fixed through a change
in ssl-opt.sh by terminating the server through a KILL signal,
which however lead to other problems when the latter was run
under valgrind.
This commit changes the idling loop in ssl_server2 and ssl_client2
to obey the return code of mbedtls_net_poll and gracefully shutdown
if an error occurs, e.g. because the socket was closed.
As a consequence, the server termination via a KILL signal in
ssl-opt.sh is no longer necessary, with the previous `kill; wait`
pattern being sufficient. The commit reverts the corresponding
change.
Initializing arrays using non-constant expressions is not permitted in
C89, and was causing errors when compiling with Metrowerks CodeWarrior
(for classic MacOS) in C89 mode. Clang also produces a warning when
compiling with '-Wc99-extensions':
test/benchmark.c:670:42: warning: initializer for aggregate is not a compile-time constant [-Wc99-extensions]
const unsigned char *dhm_P[] = { dhm_P_2048, dhm_P_3072 };
^~~~~~~~~~
test/benchmark.c:674:42: warning: initializer for aggregate is not a compile-time constant [-Wc99-extensions]
const unsigned char *dhm_G[] = { dhm_G_2048, dhm_G_3072 };
^~~~~~~~~~
Declaring the arrays as 'static' makes them constant expressions.
fixes#1353
The race goes this way:
1. ssl_recv() succeeds (ie no signal received yet)
2. processing the message leads to aborting handshake with ret != 0
3. reset ret if we were signaled
4. print error if ret is still non-zero
5. go back to net_accept() which can be interrupted by a signal
We print the error message only if the signal is received between steps 3 and
5, not when it arrives between steps 1 and 3.
This can cause failures in ssl-opt.sh where we check for the presence of "Last
error was..." in the server's output: if we perform step 2, the client will be
notified and exit, then ssl-opt.sh will send SIGTERM to the server, but if it
didn't get a chance to run and pass step 3 in the meantime, we're in trouble.
The purpose of step 3 was to avoid spurious "Last error" messages in the
output so that ssl-opt.sh can check for a successful run by the absence of
that message. However, it is enough to suppress that message when the last
error we get is the one we expect from being interrupted by a signal - doing
more could hide real errors.
Also, improve the messages printed when interrupted to make it easier to
distinguish the two cases - this could be used in a testing script wanted to
check that the server doesn't see the client as disconnecting unexpectedly.
The _ext suffix suggests "new arguments", but the new functions have
the same arguments. Use _ret instead, to convey that the difference is
that the new functions return a value.
Conflict resolution:
* ChangeLog: put the new entries in their rightful place.
* library/x509write_crt.c: the change in development was whitespace
only, so use the one from the iotssl-1251 feature branch.
1) `mbedtls_rsa_import_raw` used an uninitialized return
value when it was called without any input parameters.
While not sensible, this is allowed and should be a
succeeding no-op.
2) The MPI test for prime generation missed a return value
check for a call to `mbedtls_mpi_shift_r`. This is neither
critical nor new but should be fixed.
3) Both the RSA keygeneration example program and the
RSA test suites contained code initializing an RSA context
after a potentially failing call to CTR DRBG initialization,
leaving the corresponding RSA context free call in the
cleanup section of the respective function orphaned.
While this defect existed before, Coverity picked up on
it again because of newly introduced MPI's that were
also wrongly initialized only after the call to CTR DRBG
init. The commit fixes both the old and the new issue
by moving the initializtion of both the RSA context and
all MPI's prior to the first potentially failing call.
* public/pr/1136:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
MSVC rightfully complained that there was some conversion from `size_t`
to `unsigned int` that could come with a loss of data. This commit
re-types the corresponding struct field `ctx_buffer::len` to `size_t`.
Also, the function `ctx_buffer_append` has an integer return value
which is supposed to be the (positive) length of the appended data
on success, and a check is inserted that the data to be appended does
not exceed MAX_INT in length.
Don't mangle arguments containing spaces and other special characters,
pass them unchanged to the proxy or server as applicable.
More robust parsing of server parameters: don't hit on partial words;
use ssl_server2's default values.
Minor style improvements.
The UDP proxy corrupts application data at the end of the datagram. If
there are multiple DTLS records within the same datagram, this leads
to the wrong message being corrupted. This commit always corrupts the
beginning of the message to prevent this.
Overall, the UDP proxy needs reworking if it is supposed to reliably
support multiple records within a single datagram, because it
determines its actions from the type of the first record in the
current datagram only.
This commit provides the new option pack=TIME for the udp proxy
./programs/test/udp_proxy. If used, udp packets with the same
destination will be queued and concatenated for up to TIME
milliseconds before being delivered.
This is useful to test how mbed TLS's deals with multiple DTLS records
within a single datagram.
This commit introduces the script `programs/test/udp_proxy_wrapper.sh` which can
be used to wrap the SSL server binary `programs/ssl/ssl_server2` by the UDP
proxy application `programs/test/udp_proxy` while maintaining the same
interface from the command line.
Specifically, given UDP proxy arguments ARGS_UDP and SSL server arguments
ARGS_SSL, the command line
> ./udp_proxy_wrapper.sh ARGS_UDP -- ARGS_SSL
behaves like
> ./ssl_server2 ARGS_SSL
wrapped by
> ./udp_proxy ARGS_UDP
The motivation and benefit of this is that scripts like `ssl-opt.sh` can be used
with the server command line `P_SRV` modified to `./udp_proxy_wrapper.sh
ARGS_UDP -- DEFAULT_ARGS_SSL` which will result in all tests being executed for
an SSL server behind a UDP proxy.
This commit adds the following command line options to programs/x509/cert_write:
- version (val 1, 2, 3): Set the certificate's version (v1, v2, v3)
- authority_identifier (val 0, 1): Enable or disable the addition of the
authority identifier extension.
- subject_identifier (val 0, 1): Enable or disable the addition of the
subject identifier extension.
- basic_constraints (val 0, 1): Enable or disable the addition of the
basic constraints extension.
- md (val MD5, SHA1, SHA256, SHA512): Set the hash function used
when creating the CRT.
The AES sample application programs/aes/aescrypt2 could miss zeroizing
the stack-based key buffer in case of an error during operation. This
commit fixes this and also clears another temporary buffer as well as
all command line arguments (one of which might be the key) before exit.
The AES sample application programs/aes/crypt_and_hash could miss
zeroizing the stack-based key buffer in case of an error during
operation. This commit fixes this and also clears all command line
arguments (one of which might be the key) before exit.
This commit adds four tests to tests/ssl-opt.sh:
(1) & (2): Check behaviour of optional/required verification when the
trusted CA chain is empty.
(3) & (4): Check behaviour of optional/required verification when the
client receives a server certificate with an unsupported curve.
In the TLS test client, allow SHA-1 as a signature hash algorithm.
Without this, the renegotation tests failed.
A previous commit had allowed SHA-1 via the certificate profile but
that only applied before the initial negotiation which includes the
signature_algorithms extension.
SHA-1 is now disabled by default in the X.509 layer. Explicitly enable
it in our tests for now. Updating all the test data to SHA-256 should
be done over time.
Adding the CA suppression list option to the 'ssl_server2' sample
program is a prerequisite for adding tests for this feature to the
integration test suite (ssl-opt.sh).
In the ecdsa.c sample application we don't use hashing, we use ecdsa
directly on a buffer containing plain text. Although the text explains
that it should be the message hash it still can be confusing.
Any misunderstandings here are potentially very dangerous, because ECDSA
truncates the message hash if necessary and this can lead to trivial
signature forgeries if the API is misused and the message is passed
directly to the function without hashing.
This commit adds a hash computation step to the ecdsa.c sample
application and clarification to the doxygen documentation of the
ECDSA functions involved.
The sample application programs/ssl/ssl_server2.c was previously
modifies to use inttypes.h to parse a string to a 64-bit integer.
However, MSVC does not support C99, so compilation fails. This
patch modifies the sample app to use the MSVC specific parsing
functions instead of inttypes.h.
use mbedtls_pk_check_pair to verify if issuer certificate and issuer key match,
instad of explicitely comparing RSA public component.
Raised and fix suggested by dbedev in #777
Add a test to ssl-opt.sh to ensure that in DTLS a 6 byte record counter
is compared in ssl_check_ctr_renegotiate() instead of a 8 byte one as in
the TLS case. Because currently there are no testing facilities to check
that renegotiation routines are triggered after X number of input/output
messages, the test consists on setting a renegotiation period that
cannot be represented in 6 bytes, but whose least-significant byte is 2.
If the library behaves correctly, the renegotiation routines will be
executed after two exchanged.
The sample applications programs/pkey/cert_req.c and
programs/pkey/cert_write.c use the library functions
mbedtls_pk_write_csr_pem() and mbedtls_pk_write_crt_pem() respectively which
are dependent on the configuration option MBEDTLS_PEM_WRITE_C. If the option
isn't defined the build breaks.
This change adds the compilation condition MBEDTLS_PEM_WRITE_C to these
sample application.
The sample application programs/pkey/gen_key.c uses the library function
mbedtls_pk_write_key_pem() which is dependent on the configuration option
MBEDTLS_PEM_WRITE_C. If the option isn't defined the build breaks.
This change adds the compilation condition MBEDTLS_PEM_WRITE_C to the gen_key.c
sample application.
The library/net.c and its corresponding include/mbedtls/net.h file are
renamed to library/net_sockets.c and include/mbedtls/net_sockets.h
respectively. This is to avoid naming collisions in projects which also
have files with the common name 'net'.
The sample application programs/pkey/gen_key.c uses the library function
mbedtls_pk_write_key_pem() which is dependent on the configuration option
MBEDTLS_PEM_WRITE_C. If the option isn't defined the build breaks.
This change adds the compilation condition MBEDTLS_PEM_WRITE_C to the gen_key.c
sample application.
The library/net.c and its corresponding include/mbedtls/net.h file are
renamed to library/net_sockets.c and include/mbedtls/net_sockets.h
respectively. This is to avoid naming collisions in projects which also
have files with the common name 'net'.
* Fix crypt_and_hash to support decrypting GCM encrypted files
* Fix documentation in crypt_and_hash for the generic case
* Remove unused lastn from crypt_and_hash
lastn is not used with the cipher layer as it already provides padding
and understanding of length of the original data.
Instead of polling the hardware entropy source a single time and
comparing the output with itself, the source is polled at least twice
and make sure that the separate outputs are different.
The self test is a quick way to check at startup whether the entropy
sources are functioning correctly. The self test only polls 8 bytes
from the default entropy source and performs the following checks:
- The bytes are not all 0x00 or 0xFF.
- The hardware does not return an error when polled.
- The entropy does not provide data in a patter. Only check pattern
at byte, word and long word sizes.
Separates platform time abstraction into it's own header from the
general platform abstraction as both depend on different build options.
(MBEDTLS_PLATFORM_C vs MBEDTLS_HAVE_TIME)
Now counts and displays the number of test suites executed, which can vary
depending on build configurations.
All tests are now executed as this is a sample and test program, rather than
exit on first failure.
Exit code now restricted to SUCCESS or FAILURE.
* development: (73 commits)
Bump yotta dependencies version
Fix typo in documentation
Corrected misleading fn description in ssl_cache.h
Corrected URL/reference to MPI library
Fix yotta dependencies
Fix minor spelling mistake in programs/pkey/gen_key.c
Bump version to 2.1.2
Fix CVE number in ChangeLog
Add 'inline' workaround where needed
Fix references to non-standard SIZE_T_MAX
Fix yotta version dependencies again
Upgrade yotta dependency versions
Fix compile error in net.c with musl libc
Add missing warning in doc
Remove inline workaround when not useful
Fix macroization of inline in C++
Changed attribution for Guido Vranken
Merge of IOTSSL-476 - Random malloc in pem_read()
Fix for IOTSSL-473 Double free error
Fix potential overflow in CertificateRequest
...
Conflicts:
include/mbedtls/ssl_internal.h
library/ssl_cli.c
This commit fixes the `Destination buffer is too small` error returned
by `mbedtls_cert_write` command when the values of `subject_name` or
`issuer_name` parameters exceed 128 characters.
I have increased the size of these varaibles from 128 to 256 characters,
but I don't know if it's the best way to solve this issue...
Fixes#315.
- interrupt the connection abruptly (no close_notify)
- reconnect from the same port while server sill has an active connection from
this port.
Some real-world clients do that, see section 4.2.8 of RFC 6347.
This is not very useful for TLS as mbedtls_ssl_write() will automatically
fragment and return the length used, and the application should check for that
anyway, but this is useful for DTLS where mbedtls_ssl_write() returns an
error, and the application needs to be able to query the maximum length
instead of just guessing.
Our Windows implementation based on vsnprintf_s( ..., _TRUNCATE ) sometimes
writes *two* terminating NULLs. Allow for that, but obviously bytes past the
end of the buffer mustn't be touched.
- Added in each tests program to be sure they are run (putting them in a test
suite/function specific to the platform layer would cause them to be skipped
when PLATFORM_C is not defined).
- Platforms have already moved from a standard to a broken snprintf in the
past [1], so make sure to catch that if it ever happens again.
[1]: http://sourceforge.net/p/mingw-w64/mailman/message/31241434/
Things that are not guaranteed by the standard but should be true of all
platforms of interest to us:
- 8-bit chars
- NULL pointers represented by all-bits-zero
- Only the server needs to generate/parse tickets
- Only the client needs to store them
Also adjust prototype of ssl_conf_session_tickets() while at it.
