This commit adds a test to ssl-opt.sh which exercises the behavior
of the library in the situation where a single proper fragment
of a future handshake message is received prior to the next
expected handshake message (concretely, the client receives
the first fragment of the server's Certificate message prior
to the server's ServerHello).
This commit adds two builds to all.sh which use a value of
MBEDTLS_SSL_DTLS_MAX_BUFFERING that allows to run the
reordering tests in ssl-opt.sh introduced in the last commit.
This commit adds tests to ssl-opt.sh which trigger code-paths
responsible for freeing future buffered messages when the buffering
limitations set by MBEDTLS_SSL_DTLS_MAX_BUFFERING don't allow the
next expected message to be reassembled.
These tests only work for very specific ranges of
MBEDTLS_SSL_DTLS_MAX_BUFFERING and will therefore be skipped
on a run of ssl-opt.sh in ordinary configurations.
This commit adds functions requires_config_value_at_most()
and requires_config_value_at_least() which can be used to
only run tests when a numerical value from config.h
(e.g. MBEDTLS_SSL_IN_CONTENT_LEN) is within a certain range.
The negotiated MFL is always the one suggested by the client, even
if the server has a smaller MFL configured locally. Hence, in the test
where the client asks for an MFL of 4096 bytes while the server locally
has an MFL of 512 bytes configured, the client will still send datagrams
of up to ~4K size.
Depending on the settings of the local machine, gnutls-cli will either try
IPv4 or IPv6 when trying to connect to localhost. With TLS, whatever it tries
first, it will notice if any failure happens and try the other protocol if
necessary. With DTLS it can't do that. Unfortunately for now there isn't
really any good way to specify an address and hostname independently, though
that might come soon: https://gitlab.com/gnutls/gnutls/issues/344
A work around is to specify an address directly and then use --insecure to
ignore certificate hostname mismatch; that is OK for tests that are completely
unrelated to certificate verification (such as the recent fragmenting tests)
but unacceptable for others.
For that reason, don't specify a default hostname for gnutls-cli, but instead
let each test choose between `--insecure 127.0.0.1` and `localhost` (or
`--insecure '::1'` if desired).
Alternatives include:
- having test certificates with 127.0.0.1 as the hostname, but having an IP as
the CN is unusual, and we would need to change our test certs;
- have our server open two sockets under the hood and listen on both IPv4 and
IPv6 (that's what gnutls-serv does, and IMO it's a good thing) but that
obviously requires development and testing (esp. for windows compatibility)
- wait for a newer version of GnuTLS to be released, install it on the CI and
developer machines, and use that in all tests - quite satisfying but can't
be done now (and puts stronger requirements on test environment).
From Hanno:
When a server replies to a cookieless ClientHello with a HelloVerifyRequest,
it is supposed to reset the connection and wait for a subsequent ClientHello
which includes the cookie from the HelloVerifyRequest.
In testing environments, it might happen that the reset of the server
takes longer than for the client to replying to the HelloVerifyRequest
with the ClientHello+Cookie. In this case, the ClientHello gets lost
and the client will need retransmit. This may happen even if the underlying
datagram transport is reliable.
This commit continues commit 47db877 by removing resend guards in the
ssl-opt.sh tests 'DTLS fragmenting: proxy MTU, XXX' which sometimes made
the tests fail in case the log showed a resend from the client.
See 47db877 for more information.
When a server replies to a cookieless ClientHello with a HelloVerifyRequest,
it is supposed to reset the connection and wait for a subsequent ClientHello
which includes the cookie from the HelloVerifyRequest.
In testing environments, it might happen that the reset of the server
takes longer than for the client to replying to the HelloVerifyRequest
with the ClientHello+Cookie. In this case, the ClientHello gets lost
and the client will need retransmit. This may happen even if the underlying
datagram transport is reliable.
This commit removes a guard in the ssl-opt.sh test
'DTLS fragmenting: proxy MTU, resumed handshake' which made
the test fail in case the log showed a resend from the client.
We previously observed random-looking failures from this test. I think they
were caused by a race condition where the client tries to reconnect while the
server is still closing the connection and has not yet returned to an
accepting state. In that case, the server would fail to see and reply to the
ClientHello, and the client would have to resend it.
I believe logs of failing runs are compatible with this interpretation:
- the proxy logs show the new ClientHello and the server's closing Alert are
sent the same millisecond.
- the client logs show the server's closing Alert is received after the new
handshake has been started (discarding message from wrong epoch).
The attempted fix is for the client to wait a bit before reconnecting, which
should vastly enhance the probability of the server reaching its accepting
state before the client tries to reconnect. The value of 1 second is arbitrary
but should be more than enough even on loaded machines.
The test was run locally 100 times in a row on a slightly loaded machine (an
instance of all.sh running in parallel) without any failure after this fix.
Use the same values as other 3d tests: this makes the test hopefully a bit
faster than the default values, while not increasing the failure rate.
While at it:
- adjust "needs_more_time" setting for 3d interop tests (we can't set the
timeout values for other implementations, so the test might be slow)
- fix some supposedly DTLS 1.0 test that were using dtls1_2 on the command
line
Now that the UDP proxy has the ability to delay specific
handshake message on the client and server side, use
this to rewrite the reordering tests and thereby make
them independent on the choice of PRNG used by the proxy
(which is not stable across platforms).
This commit adds four tests to ssl-opt.sh running default
DTLS client and server with and without datagram packing
enabled, and checking that datagram packing is / is not
used by inspecting the debug output.
The UDP proxy does currently not dissect datagrams into records,
an hence the coverage of the reordering, package loss and duplication
tests is much smaller if datagram packing is in use.
This commit disables datagram packing for most UDP proxy tests,
in particular all 3D (drop, duplicate, delay) tests.
Now that datagram packing can be dynamically configured,
the test exercising the behavior of Mbed TLS when facing
an out-of-order CCS message can be re-introduced, disabling
datagram packing for the sender of the delayed CCS.
The tests "DTLS fragmenting: none (for reference)" and
"DTLS fragmenting: none (for reference) (MTU)" used a
maximum fragment length resp. MTU value of 2048 which
was meant to be large enough so that fragmentation
of the certificate message would not be necessary.
However, it is not large enough to hold the entire flight
to which the certificate belongs, and hence there will
be fragmentation as soon as datagram packing is used.
This commit increases the maximum fragment length resp.
MTU values to 4096 bytes to ensure that even with datagram
packing in place, no fragmentation is necessary.
A similar change was made in "DTLS fragmenting: client (MTU)".
The test exercising a delayed CCS message is not
expected to work when datagram packing is used,
as the current UDP proxy is not able to recognize
records which are not at the beginning of a
datagram.
Adds a requirement for GNUTLS_NEXT (3.5.3 or above, in practice we should
install 3.6.3) on the CI.
See internal ref IOTSSL-2401 for analysis of the bugs and their impact on the
tests.
For now, just check that it causes us to fragment. More tests are coming in
follow-up commits to ensure we respect the exact value set, including when
renegotiating.
Note: no interop tests in ssl-opt.sh for now, as some of them make us run into
bugs in (the CI's default versions of) OpenSSL and GnuTLS, so interop tests
will be added later once the situation is clarified. <- TODO
Test application names and function file names can be constructed
based on the followed naming convention. This commit documents the
naming convention and removes explicit listing of the test
executables and the lookup table for finding .function file.
When using Python 2 (which is done in the Makefile), all #line
directives from the test code were generated with the line number 1.
This traces back to the change in the method name for generators in
Python 2 (next) vs Python 3 (__next__). Override both methods so that
the script remains compatible with both Python 2 and Python 3.
Function test_snprintf() is called by run_test_snprintf() with constant test
data. It gets inlined and is subjected to snprintf format truncation checks
introduced by -Wformat-truncation in gcc-7. -Wformat-truncation is turned
On by -Wall and other similar options. It results in error with -Werror.
-Wformat-truncation makes tests performed by run_test_snprintf() redundant
on gcc. But they are still relevant for other compilers. This commit prevents
inlining of test_snprintf() to avoid gcc compile time checks.
Code generator has been modified to generate case statements for dependency checks and expression checks.
This commit updates the unit tests accordingly.
Test suite header code was not gaurded with test suite dependency.
But some test suites have additional code in the headers section.
Variables in that section become unused if suite functions are
gaurded. Hence gaurded the headers section.
But this changed cuased missing types in get_expression() function
that was originally accessing types defined through suite headers.
Hence had to gaurd expressions code as well.
Gaurding expressions does not allow parsing the parameters when
some types or hash defs are gaurded. Hence added function
check_test() to check if test is allowed or not before parsing the
parameters.
- Separate string and hex parameter as unhexify is moved out of the function. It's input should only be hex.
- Fix test mbedtls_ccm_encrypt_and_tag that grows input message buffer with tag
- Add missing expected length parameter in ECP TLS tests
- Add deleted TEST_ASSERT and mbedtls calls that got removed in script based code generation
New target gen-mbed-test generates mebdtls tests in mbed-os test format.
i.e. a dir tree like TESTS/<testgroup>/[<sub testgroup>/]<test case>.
The TESTS dir can then be imported into mbed-os to compile tests with mbed-os.
Added an additional i386 test to all.sh, to allow one test with -O0 which
compiles out inline assembly, and one to test with -01 which includes the inline
assembly.
The i386 test builds were only building the default configuration and had
no address sanitisation. This commit expands the test configuration to the full
configuration in all.sh and builds with ASan for when the test suites are
executed.
When calling all.sh from a script and using "--keep-going", errors were
sometimes missed due to all.sh always returning 0 "success" return code.
Return 1 if there is any failure encountered during a "keep-going" run.
1. Update the test script to un the ECC tests only if the relevant
configurations are defined in `config.h` file
2. Change the HASH of the ciphersuite from SHA1 based to SHA256
for better example
This is disabled by default since it requires OpenSSL >= 1.1.0 and the current
default version on the CI is 1.0.2. However, the CI also has 1.1.1-rc which
can be used for this.
I'm going to touch the GCM/CCM/CCM-8 code in the next commit, and so far we
didn't have any interop testing for CCM/CCM-8.
Our standard development/testing environment currently has GnuTLS 3.4.10, and
fortunately support for CCM/CCM-8 was introduced in GnuTLS 3.4.0
Support in OpenSSL was introduced in 1.1.0 which is not yet the default
version in the CI.
* development: (182 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
The code paths in the library are different for decryption and for
signature. Improve the test coverage by doing some error path tests
for decryption in addition to signature.
mbedtls_aes_crypt_xts() currently takes a `bits_length` parameter, unlike
the other block modes. Change the parameter to accept a bytes length
instead, as the `bits_length` parameter is not actually ever used in the
current implementation.
Add a new context structure for XTS. Adjust the API for XTS to use the new
context structure, including tests suites and the benchmark program. Update
Doxgen documentation accordingly.
AES-XEX is a building block for other cryptographic standards and not yet a
standard in and of itself. We'll just provide the standardized AES-XTS
algorithm, and not AES-XEX. The AES-XTS algorithm and interface provided
can be used to perform the AES-XEX algorithm when the length of the input
is a multiple of the AES block size.
XTS mode is fully known as "xor-encrypt-xor with ciphertext-stealing".
This is the generalization of the XEX mode.
This implementation is limited to an 8-bits (1 byte) boundary, which
doesn't seem to be what was thought considering some test vectors [1].
This commit comes with tests, extracted from [1], and benchmarks.
Although, benchmarks aren't really nice here, as they work with a buffer
of a multiple of 16 bytes, which isn't a challenge for XTS compared to
XEX.
[1] http://csrc.nist.gov/groups/STM/cavp/documents/aes/XTSTestVectors.zip
The test cases come from the XTS test vectors given by the CAVP initiative
from NIST (see [1]).
As mentioned in a previous commit, XEX is a simpler case of XTS.
Therefore, to construct the test_suite_aes.xex.data file, extraction of
the XEX-possible cases has been done on the given test vectors.
All of the extracted test vectors pass the tests on a Linux x86_64 machine.
[1] http://csrc.nist.gov/groups/STM/cavp/documents/aes/XTSTestVectors.zip
This patch uses grep to search the GDB output for errors as there is
a bug in the tool that causes it to return 0 to the system even though
there was a problem in the script.
This patch also fixes the zeroize test to work with the --keep-going
option in all.sh.
Adds error handling into mbedtls_aes_crypt_ofb for AES errors, a self-test
for the OFB mode using NIST SP 800-38A test vectors and adds a check to
potential return errors in setting the AES encryption key in the OFB test
suite.
* development: (97 commits)
Updated version number to 2.10.0 for release
Add a disabled CMAC define in the no-entropy configuration
Adapt the ARIA test cases for new ECB function
Fix file permissions for ssl.h
Add ChangeLog entry for PR#1651
Fix MicroBlaze register typo.
Fix typo in doc and copy missing warning
Fix edit mistake in cipher_wrap.c
Update CTR doc for the 64-bit block cipher
Update CTR doc for other 128-bit block ciphers
Slightly tune ARIA CTR documentation
Remove double declaration of mbedtls_ssl_list_ciphersuites
Update CTR documentation
Use zeroize function from new platform_util
Move to new header style for ALT implementations
Add ifdef for selftest in header file
Fix typo in comments
Use more appropriate type for local variable
Remove useless parameter from function
Wipe sensitive info from the stack
...
Motivation is similar to NO_UDBL_DIVISION.
The alternative implementation of 64-bit mult is straightforward and aims at
obvious correctness. Also, visual examination of the generate assembly show
that it's quite efficient with clang, armcc5 and arm-clang. However current
GCC generates fairly inefficient code for it.
I tried to rework the code in order to make GCC generate more efficient code.
Unfortunately the only way to do that is to get rid of 64-bit add and handle
the carry manually, but this causes other compilers to generate less efficient
code with branches, which is not acceptable from a side-channel point of view.
So let's keep the obvious code that works for most compilers and hope future
versions of GCC learn to manage registers in a sensible way in that context.
See https://bugs.launchpad.net/gcc-arm-embedded/+bug/1775263
Commit 08c337d058 "Remove useless parameter from function" removed the
parameter mode from the functions mbedtls_aria_crypt_ecb() which broke their
respective test suite.
This commit fixes those test cases.
Allowing DECRYPT with crypt_and_tag is a risk as people might fail to check
the tag correctly (or at all). So force them to use auth_decrypt() instead.
See also https://github.com/ARMmbed/mbedtls/pull/1668
- need HW failure codes too
- re-use relevant poly codes for chachapoly to save on limited space
Values were chosen to leave 3 free slots at the end of the NET odd range.
This module used (len, pointer) while (pointer, len) is more common in the
rest of the library, in particular it's what's used in the CMAC API that is
very comparable to Poly1305, so switch to (pointer, len) for consistency.
In addition to making the APIs of the various AEAD modules more consistent
with each other, it's useful to have an auth_decrypt() function so that we can
safely check the tag ourselves, as the user might otherwise do it in an
insecure way (or even forget to do it altogether).
While the old name is explicit and aligned with the RFC, it's also very long,
so with the mbedtls_ prefix prepended we get a 31-char prefix to each
identifier, which quickly conflicts with our 80-column policy.
The new name is shorter, it's what a lot of people use when speaking about
that construction anyway, and hopefully should not introduce confusion at
it seems unlikely that variants other than 20/1305 be standardised in the
foreseeable future.
This implementation is based off the description in RFC 7539.
The ChaCha20 code is also updated to provide a means of generating
keystream blocks with arbitrary counter values. This is used to
generated the one-time Poly1305 key in the AEAD construction.
* development: (504 commits)
Fix minor code style issues
Add the uodate to the soversion to the ChangeLog
Fix the ChangeLog for clarity, english and credit
Update version to 2.9.0
ecp: Fix binary compatibility with group ID
Changelog entry
Change accepted ciphersuite versions when parsing server hello
Remove preprocessor directives around platform_util.h include
Fix style for mbedtls_mpi_zeroize()
Improve mbedtls_platform_zeroize() docs
mbedtls_zeroize -> mbedtls_platform_zeroize in docs
Reword config.h docs for MBEDTLS_PLATFORM_ZEROIZE_ALT
Organize CMakeLists targets in alphabetical order
Organize output objs in alfabetical order in Makefile
Regenerate errors after ecp.h updates
Update ecp.h
Change variable bytes_written to header_bytes in record decompression
Update ecp.h
Update ecp.h
Update ecp.h
...
The certificate passed to async callbacks may not be the one set by
mbedtls_ssl_conf_own_cert. For example, when using an SNI callback,
it's whatever the callback is using. Document this, and add a test
case (and code sample) with SNI.
Add a test case for SSL asynchronous signature where f_async_resume is
called twice. Verify that f_async_sign_start is only called once.
This serves as a non-regression test for a bug where f_async_sign_start
was only called once, which turned out to be due to a stale build
artifacts with mismatched numerical values of
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS.
Testing the case where the resume callback returns an error at the
beginning and the case where it returns an error at the end is
redundant. Keep the test after the output has been produced, to
validate that the product does not use even a valid output if the
return value is an error code.
Document how the SSL async sign callback must treat its md_alg and
hash parameters when doing an RSA signature: sign-the-hash if md_alg
is nonzero (TLS 1.2), and sign-the-digestinfo if md_alg is zero
(TLS <= 1.1).
In ssl_server2, don't use md_alg=MBEDTLS_MD_NONE to indicate that
ssl_async_resume must perform an encryption, because md_alg is also
MBEDTLS_MD_NONE in TLS <= 1.1. Add a test case to exercise this
case (signature with MBEDTLS_MD_NONE).
Conflict resolution:
* ChangeLog: put the new entry from my branch in the proper place.
* include/mbedtls/error.h: counted high-level module error codes again.
* include/mbedtls/ssl.h: picked different numeric codes for the
concurrently added errors; made the new error a full sentence per
current standards.
* library/error.c: ran scripts/generate_errors.pl.
* library/ssl_srv.c:
* ssl_prepare_server_key_exchange "DHE key exchanges": the conflict
was due to style corrections in development
(4cb1f4d49c) which I merged with
my refactoring.
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first case, variable declarations: merged line
by line:
* dig_signed_len: added in async
* signature_len: removed in async
* hashlen: type changed to size_t in development
* hash: size changed to MBEDTLS_MD_MAX_SIZE in async
* ret: added in async
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first cae comment: the conflict was due to style
corrections in development (4cb1f4d49c)
which I merged with my comment changes made as part of refactoring
the function.
* ssl_prepare_server_key_exchange "Compute the hash to be signed" if
`md_alg != MBEDTLS_MD_NONE`: conflict between
ebd652fe2d
"ssl_write_server_key_exchange: calculate hashlen explicitly" and
46f5a3e9b4 "Check return codes from
MD in ssl code". I took the code from commit
ca1d742904 made on top of development
which makes mbedtls_ssl_get_key_exchange_md_ssl_tls return the
hash length.
* programs/ssl/ssl_server2.c: multiple conflicts between the introduction
of MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and new auxiliary functions and
definitions for async support, and the introduction of idle().
* definitions before main: concurrent additions, kept both.
* main, just after `handshake:`: in the loop around
mbedtls_ssl_handshake(), merge the addition of support for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and SSL_ASYNC_INJECT_ERROR_CANCEL
with the addition of the idle() call.
* main, if `opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM`: take the
code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS.
* main, loop around mbedtls_ssl_read() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
* main, loop around mbedtls_ssl_write() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
Add test cases for SSL asynchronous signature to ssl-opt.sh:
* Delay=0,1 to test the sequences of calls to f_async_resume
* Test fallback when the async callbacks don't support that key
* Test error injection at each stage
* Test renegotiation
Improve the position of the breakpoint to be set at a line of code that
is less likely to be optimised out by the compiler. Setting the breakpoint
at a place that can be easily optimised out by the compiler will cause the
gdb script to fail as it cannot match the source code line to the
compiled code. For this reason the breakpoint is now set at the fclose()
call which is very unlikely to be optimised out or there might be a
resource leak.
The gdb script loads the programs/test/zeroize program and feeds it as
imput its own source code. Then sets a breakpoint just before the last
program's return code and checks that every element in memory was
zeroized. Otherwise it signals a failure and terminates.
The test was added to all.sh.
The specification requires that numbers are the raw entropy (except for odd/
even) and at least 2^(nbits-0.5). If not, new random bits need to be used for
the next number. Similarly, if the number is not prime new random bits need to
be used.
Conflict resolution:
* ChangeLog
* tests/data_files/Makefile: concurrent additions, order irrelevant
* tests/data_files/test-ca.opensslconf: concurrent additions, order irrelevant
* tests/scripts/all.sh: one comment change conflicted with a code
addition. In addition some of the additions in the
iotssl-1381-x509-verify-refactor-restricted branch need support for
keep-going mode, this will be added in a subsequent commit.
The relevant ASN.1 definitions for a PKCS#8 encoded Elliptic Curve key are:
PrivateKeyInfo ::= SEQUENCE {
version Version,
privateKeyAlgorithm PrivateKeyAlgorithmIdentifier,
privateKey PrivateKey,
attributes [0] IMPLICIT Attributes OPTIONAL
}
AlgorithmIdentifier ::= SEQUENCE {
algorithm OBJECT IDENTIFIER,
parameters ANY DEFINED BY algorithm OPTIONAL
}
ECParameters ::= CHOICE {
namedCurve OBJECT IDENTIFIER
-- implicitCurve NULL
-- specifiedCurve SpecifiedECDomain
}
ECPrivateKey ::= SEQUENCE {
version INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1),
privateKey OCTET STRING,
parameters [0] ECParameters {{ NamedCurve }} OPTIONAL,
publicKey [1] BIT STRING OPTIONAL
}
Because of the two optional fields, there are 4 possible variants that need to
be parsed: no optional fields, only parameters, only public key, and both
optional fields. Previously mbedTLS was unable to parse keys with "only
parameters". Also, only "only public key" was tested. There was a test for "no
optional fields", but it was labelled incorrectly as SEC.1 and not run because
of a great renaming mixup.
Only delete things that we expect to find, to avoid deleting other
things that people might have lying around in their build tree.
Explicitly skip .git to avoid e.g. accidentally matching a branch
name.
All options can now be overridden by a subsequent option, e.g.
"all.sh --foo --no-foo" is equivalent to "all.sh --no-foo". This
allows making wrapper scripts with default options and occasionally
overriding those options when running the wrapper script.
Previously, the idling loop in ssl_server2 didn't check whether
the underlying call to mbedtls_net_poll signalled that the socket
became invalid. This had the consequence that during idling, the
server couldn't be terminated through a SIGTERM, as the corresponding
handler would only close the sockets and expect the remainder of
the program to shutdown gracefully as a consequence of this.
This was subsequently attempted to be fixed through a change
in ssl-opt.sh by terminating the server through a KILL signal,
which however lead to other problems when the latter was run
under valgrind.
This commit changes the idling loop in ssl_server2 and ssl_client2
to obey the return code of mbedtls_net_poll and gracefully shutdown
if an error occurs, e.g. because the socket was closed.
As a consequence, the server termination via a KILL signal in
ssl-opt.sh is no longer necessary, with the previous `kill; wait`
pattern being sufficient. The commit reverts the corresponding
change.
The UDP tests involving the merging of multiple records into single
datagrams accumulate records for 10ms, which can be less than the
total flight preparation time if e.g. the tests are being run with
valgrind.
This commit increases the packing time for the relevant tests
from 10ms to 50ms.
The 'critical' boolean can be set to false in two ways:
- by leaving it implicit (test data generated by openssl)
- by explicitly setting it to false (generated by hand)
This covers all lines added in the previous commit. Coverage was tested using:
make CFLAGS='--coverage -g3 -O0'
(cd tests && ./test_suite_x509parse)
make lcov
firefox Coverage/index.html # then visual check
Test data was generated by taking a copy of tests/data_files/crl-idp.pem,
encoding it as hex, and then manually changing the values of some bytes to
achieve the desired errors, using https://lapo.it/asn1js/ for help in locating
the desired bytes.
