This commit adds the command line option 'bad_cid' to the UDP proxy
`./programs/test/udp_proxy`. It takes a non-negative integral value N,
which if not 0 has the effect of duplicating every 1:N CID records
and modifying the CID in the first copy sent.
This is to exercise the stacks documented behaviour on receipt
of unexpected CIDs.
It is important to send the record with the unexpected CID first,
because otherwise the packet would be dropped already during
replay protection (the same holds for the implementation of the
existing 'bad_ad' option).
This commit modifies the CID configuration API mbedtls_ssl_conf_cid_len()
to allow the configuration of the stack's behaviour when receiving an
encrypted DTLS record with unexpected CID.
ApplicationData records are not protected against loss by DTLS
and our test applications ssl_client2 and ssl_server2 don't
implement any retransmission scheme to deal with loss of the
data they exchange. Therefore, the UDP proxy programs/test/udp_proxy
does not drop ApplicationData records.
With the introduction of the Connection ID, encrypted ApplicationData
records cannot be recognized as such by inspecting the record content
type, as the latter is always set to the CID specific content type for
protected records using CIDs, while the actual content type is hidden
in the plaintext.
To keep tests working, this commit adds CID records to the list of
content types which are protected against dropping by the UDP proxy.
Context:
The CID draft does not require that the length of CIDs used for incoming
records must not change in the course of a connection. Since the record
header does not contain a length field for the CID, this means that if
CIDs of varying lengths are used, the CID length must be inferred from
other aspects of the record header (such as the epoch) and/or by means
outside of the protocol, e.g. by coding its length in the CID itself.
Inferring the CID length from the record's epoch is theoretically possible
in DTLS 1.2, but it requires the information about the epoch to be present
even if the epoch is no longer used: That's because one should silently drop
records from old epochs, but not the entire datagrams to which they belong
(there might be entire flights in a single datagram, including a change of
epoch); however, in order to do so, one needs to parse the record's content
length, the position of which is only known once the CID length for the epoch
is known. In conclusion, it puts a significant burden on the implementation
to infer the CID length from the record epoch, which moreover mangles record
processing with the high-level logic of the protocol (determining which epochs
are in use in which flights, when they are changed, etc. -- this would normally
determine when we drop epochs).
Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs,
but every epoch may use a set of CIDs of varying lengths -- in that case,
it's even theoretically impossible to do record header parsing based on
the epoch configuration only.
We must therefore seek a way for standalone record header parsing, which
means that we must either (a) fix the CID lengths for incoming records,
or (b) allow the application-code to configure a callback to implement
an application-specific CID parsing which would somehow infer the length
of the CID from the CID itself.
Supporting multiple lengths for incoming CIDs significantly increases
complexity while, on the other hand, the restriction to a fixed CID length
for incoming CIDs (which the application controls - in contrast to the
lengths of the CIDs used when writing messages to the peer) doesn't
appear to severely limit the usefulness of the CID extension.
Therefore, the initial implementation of the CID feature will require
a fixed length for incoming CIDs, which is what this commit enforces,
in the following way:
In order to avoid a change of API in case support for variable lengths
CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which
includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len()
which applies to an SSL configuration, and which fixes the CID length that
any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound
to the given SSL configuration must use.
While this creates a slight redundancy of parameters, it allows to
potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which
could allow users to register a callback which dynamically infers the
length of a CID at record header parsing time, without changing the
rest of the API.
The example programs programs/x509/cert_req and programs/x509/cert_write
(demonstrating the use of X.509 CSR and CRT writing functionality)
previously didn't support MD2 signatures.
For testing purposes, this commit adds support for MD2 to cert_req,
and support for MD2 and MD4 to cert_write.
Adapt tests in all.sh:
- tests with submodule enabled (default) no longer need to enable it
explicitly, and no longer need runtime tests, as those are now handled by
all other test cases in this script
- tests with submodule disabled (old default) now need to disable it
explicitly, and execute some runtime tests, as those are no longer tested
anywhere else in this script
Adapt documentation in Readme: remove the section "building with submodule"
and replace it with a new section before the other building sections.
Purposefully don't document how to build not from the submodule, as that
option is going away soon.
Resolve conflicts by performing the following:
- Ensure calls to mbedtls_x509_crt_verify_* are made with callbacks
* origin/pr/2539:
Make CRT callback tests more robust
Rename constant in client2.c
Fix typo
Add test for configuration specific CRT callback
Fix doxygen documentation of mbedtls_ssl_set_verify()
Add test exercising context-specific CRT callback to ssl-opt.sh
Add cmd to use context-specific CRT callback in ssl_client2
Implement context-specific verification callbacks
Add context-specific CRT verification callbacks
Improve documentation of mbedtls_ssl_conf_verify()
* origin/pr/2532: (29 commits)
Document and test flags in x509_verify
Fix style issues and a typo
Fix name to function call
Address comments for x509 tests
Address review comments regarding ssl_client2 and ssl tests
Remove mbedtls_ from the static function name
Change docs according to review comments
Change the verify function naming
Fix ssl_client2 and ssl_server2 if !PLATFORM_C
Correct placement of usage macro in ssl_client2
Update version_features.c
Remove trailing whitespace in test_suite_x509parse.function
Update query_config.c
Add ssl-opt.sh tests for trusted CA callbacks
Only run X.509 CRT verification tests with CA callback tests if !CRL
Minor fixes to CA callback tests
Declare CA callback type even if feature is disabled
Implement X.509 CRT verification using CA callback
Add prototype for CRT verification with static and dynamic CA list
Make use of CA callback if present when verifying peer CRT chain
...
Remove the ssl_cert_test sample application, as it uses
hardcoded certificates that moved, and is redundant with the x509
tests and applications. Fixes#1905.
The CA callback changes introduce mbedtls_calloc() and
mbedtls_free() to ssl_client2 and ssl_server2, which
wasn't defined unless MBEDTLS_PLATFORM_C was set.
Ensure this merge passes tests by auto-generating query_config.c, adding
MBEDTLS_ECDH_LEGACY_CONTEXT to it.
* restricted/pr/552:
Fix mbedtls_ecdh_get_params with new ECDH context
Test undefining MBEDTLS_ECDH_LEGACY_CONTEXT in all.sh
Define MBEDTLS_ECDH_LEGACY_CONTEXT in config.h
Add changelog entry for mbedtls_ecdh_get_params robustness
Fix ecdh_get_params with mismatching group
Add test case for ecdh_get_params with mismatching group
Add test case for ecdh_calc_secret
Fix typo in documentation
Update the crypto submodule to the top of the Mbed Crypto development
branch. This brings in a version of Mbed Crypto that enables building
Mbed Crypto tests that depend on private headers, like
'psa_crypto_invasive.h'.
This also requires updating our config.h to include new configuration
options added to Mbed Crypto. MBEDTLS_PSA_ITS_FILE_C replaces
MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C and MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C.
MBEDTLS_PSA_INJECT_ENTROPY replaces MBEDTLS_PSA_HAS_ITS_IO.
* public/pr/2421: (68 commits)
Fix unused variable warning in ssl_parse_certificate_coordinate()
Add missing compile time guard in ssl_client2
Update programs/ssl/query_config.c
ssl_client2: Reset peer CRT info string on reconnect
Add further debug statements on assertion failures
Fix typo in documentation of ssl_parse_certificate_chain()
Add debug output in case of assertion failure
Fix typo in SSL ticket documentation
Add config sanity check for !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
ssl_client2: Zeroize peer CRT info buffer when reconnecting
Reintroduce numerous ssl-opt.sh tests if !MBEDTLS_SSL_KEEP_PEER_CERT
ssl_client2: Extract peer CRT info from verification callback
Improve documentation of mbedtls_ssl_get_peer_cert()
Improve documentation of MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
Fix indentation of Doxygen comment in ssl_internal.h
Set peer CRT length only after successful allocation
Remove question in comment about verify flags on cli vs. server
Remove misleading and redundant guard around restartable ECC field
Add test for !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE to all.sh
Free peer CRT chain immediately after verifying it
...
* restricted/pr/528:
Update query_config.c
Fix failure in SSLv3 per-version suites test
Adjust DES exclude lists in test scripts
Clarify 3DES changes in ChangeLog
Fix documentation for 3DES removal
Exclude 3DES tests in test scripts
Fix wording of ChangeLog and 3DES_REMOVE docs
Reduce priority of 3DES ciphersuites
So far, `ssl_client2` printed the CRT info for the peer's CRT
by requesting the latter through `mbedtls_ssl_get_peer_cert()`
at the end of the handshake, and printing it via
`mbedtls_x509_crt_info()`. When `MBEDTLS_SSL_KEEP_PEER_CERTIFICATE`
is disabled, this does no longer work because the peer's CRT
isn't stored beyond the handshake.
This makes some tests in `ssl-opt.sh` fail which rely on the CRT
info output for the peer certificate.
This commit modifies `ssl_client2` to extract the peer CRT info
from the verification callback, which is always called at a time
when the peer's CRT is available. This way, the peer's CRT info
is still printed if `MBEDTLS_SSL_KEEP_PEER_CERTIFICATE` is disabled.
Additional work done as part of merge:
- Run ./tests/scripts/check-generated-files.sh and check in the
resulting changes to programs/ssl/query_config.c
This commit improves hygiene and formatting of macro definitions
throughout the library. Specifically:
- It adds brackets around parameters to avoid unintended
interpretation of arguments, e.g. due to operator precedence.
- It adds uses of the `do { ... } while( 0 )` idiom for macros that
can be used as commands.
Additional changes to temporarily enable running tests:
ssl_srv.c and test_suite_ecdh use mbedtls_ecp_group_load instead of
mbedtls_ecdh_setup
test_suite_ctr_drbg uses mbedtls_ctr_drbg_update instead of
mbedtls_ctr_drbg_update_ret
The previous prototype gave warnings are the strings produced by #cond and
__FILE__ are const, so we shouldn't implicitly cast them to non-const.
While at it modifying most example programs:
- include the header that has the function declaration, so that the definition
can be checked to match by the compiler
- fix whitespace
- make it work even if PLATFORM_C is not defined:
- CHECK_PARAMS is not documented as depending on PLATFORM_C and there is
no reason why it should
- so, remove the corresponding #if defined in each program...
- and add missing #defines for mbedtls_exit when needed
The result has been tested (make all test with -Werror) with the following
configurations:
- full with CHECK_PARAMS with PLATFORM_C
- full with CHECK_PARAMS without PLATFORM_C
- full without CHECK_PARAMS without PLATFORM_C
- full without CHECK_PARAMS with PLATFORM_C
Additionally, it has been manually tested that adding
mbedtls_aes_init( NULL );
near the normal call to mbedtls_aes_init() in programs/aes/aescrypt2.c has the
expected effect when running the program.
The sample programs require an additional handler function of
mbedtls_param_failed() to handle any failed parameter validation checks enabled
by the MBEDTLS_CHECK_PARAMS config.h option.
Some sample programs access structure fields directly. Making these work is
desirable in the long term, but these are not essential for the core
functionality in non-legacy mode.
Programs and tests need to be able to use PSA header files when
USE_CRYPTO_SUBMODULE and MBEDTLS_USE_PSA_CRYPTO are set. Add the crypto
submodule include folder, which contains psa headers, after the main
include folder so that psa headers can be found and crypto submodule
headers don't take precedence over mbedtls headers.
Otherwise, if `mbedtls_psa_get_free_key_slot()` fails to find a fresh
key slot, the slot value will be undefined, and the call to
`psa_destroy_key()` at the end of `main()` is undefined behavior.
Previously, command line arguments `psk_slot` and `psk_list_slot`
could be used to indicate the PSA key slots that the example
applications should use to store the PSK(s) provided.
This commit changes this approach to use the utility function
`mbedtls_psa_get_free_key_slot()` to obtain free key slots from
the PSA Crypto implementation automatically, so that users only
need to pass boolean flags `psk_opaque` and `psk_list_opaque`
on the command line to enable / disable PSA-based opaque PSKs.
This commit adds command line parameters `psk_slot` and `psk_list_slot`
to the example application `programs/ssl/ssl_server2`. These have the
following semantics:
- `psk_slot`: The same semantics as for the `ssl_client2` example
application. That is, if a PSK is configured through the use
of the command line parameters `psk` and `psk_identity`, then
`psk_slot=X` can be used to import the PSK into PSA key slot X
and registering it statically with the SSL configuration through
the new API call mbedtls_ssl_conf_hs_opaque().
- `psk_list_slot`: In addition to the static PSK registered in the
the SSL configuration, servers can register a callback for picking
the PSK corresponding to the PSK identity that the client chose.
The `ssl_server2` example application uses such a callback to select
the PSK from a list of PSKs + Identities provided through the
command line parameter `psk_list`, and to register the selected
PSK via `mbedtls_ssl_set_hs_psk()`. In this case, the new parameter
`psk_list_slot=X` has the effect of registering all PSKs provided in
in `psk_list` as PSA keys in the key slots starting from slot `X`,
and having the PSK selection callback register the chosen PSK
through the new API function `mbedtls_ssl_set_hs_psk_opaque()`.
This commit adds support for the use of PSA-based opaque PSKs
in the TLS client example application programs/ssl/ssl_client2.
Specifically, a numerical command line option `psk_slot` with
the following constraints and semantics is added:
- It can only be used alongside the provisioning of a raw PSK
through the preexisting `psk` command line option.
- It can only be used if both TLS 1.2 and a PSK-only ciphersuite
are enforced through the appropriate use of the `min_version`
and `force_ciphersuite` command line options.
- If the previous conditions are met, setting `psk_slot=d` will
result in the PSA key slot with identifier `d` being populated
with the raw PSK data specified through the `psk` parameter
and passed to Mbed TLS via `mbedtls_ssl_conf_psk_opaque()`
prior to the handshake.
Enforcing the TLS version and ciphersuite is necessary to determine
the exact KDF algorithm the PSK will be used for. This is required
as it is currently not possible to set up a key without specifying
exactly one algorithm the key may be used with.
This commit adds a command line option `md` to the example application
`programs/x509/cert_req` allowing to specify the hash algorithm to use
when signing the CSR.
* development:
ssl-opt.sh: change expected output for large srv packet test with SSLv3
Adapt ChangeLog
Fix bug in SSL ticket implementation removing keys of age < 1s
ssl-opt.sh: Add DTLS session resumption tests
Add ChangeLog entry
Fix typo
Fix hmac_drbg failure in benchmark, with threading
Remove trailing whitespace
Remove trailing whitespace
ssl_server2: add buffer overhead for a termination character
Add missing large and small packet tests for ssl_server2
Added buffer_size and response_size options for ssl-server2. Added appropriate tests.
Solving a conflict in tests/ssl-opt.sh: two set of tests were added at the
same place (just after large packets):
- restartable ECC tests (in this branch)
- server-side large packets (in development)
Resolution was to move the ECC tests after the newly added server large packet
ones.
This commit replaces multiple `memset()` calls in the example
programs aes/aescrypt2.c and aes/crypt_and_hash.c by calls to
the reliable zeroization function `mbedtls_zeroize()`.
While not a security issue because the code is in the example
programs, it's bad practice and should be fixed.
When using a primality testing function the tolerable error rate depends
on the scheme in question, the required security strength and wether it
is used for key generation or parameter validation. To support all use
cases we need more flexibility than what the old API provides.
If `MBEDTLS_MEMORY_BUFFER_ALLOC_C` is configured and Mbed TLS'
custom buffer allocator is used for calloc() and free(), the
read buffer used by the server example application is allocated
from the buffer allocator, but freed after the buffer allocator
has been destroyed. If memory backtracing is enabled, this leaves
a memory leak in the backtracing structure allocated for the buffer,
as found by valgrind.
Fixes#2069.
* The variables `csr` and `issuer_crt` are initialized but not freed.
* The variable `entropy` is unconditionally freed in the cleanup section
but there's a conditional jump to that section before its initialization.
This cmmot Moves it to the other initializations happening before the
first conditional jump to the cleanup section.
Fixes#1422.
* development-restricted: (578 commits)
Update library version number to 2.13.1
Don't define _POSIX_C_SOURCE in header file
Don't declare and define gmtime()-mutex on Windows platforms
Correct preprocessor guards determining use of gmtime()
Correct documentation of mbedtls_platform_gmtime_r()
Correct typo in documentation of mbedtls_platform_gmtime_r()
Correct POSIX version check to determine presence of gmtime_r()
Improve documentation of mbedtls_platform_gmtime_r()
platform_utils.{c/h} -> platform_util.{c/h}
Don't include platform_time.h if !MBEDTLS_HAVE_TIME
Improve wording of documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Fix typo in documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Replace 'thread safe' by 'thread-safe' in the documentation
Improve documentation of MBEDTLS_HAVE_TIME_DATE
ChangeLog: Add missing renamings gmtime -> gmtime_r
Improve documentation of MBEDTLS_HAVE_TIME_DATE
Minor documentation improvements
Style: Add missing period in documentation in threading.h
Rename mbedtls_platform_gmtime() to mbedtls_platform_gmtime_r()
Guard decl and use of gmtime mutex by HAVE_TIME_DATE and !GMTIME_ALT
...
Previously, the UDP proxy could only remember one delayed message
for future transmission; if two messages were delayed in succession,
without another one being normally forwarded in between,
the message that got delayed first would be dropped.
This commit enhances the UDP proxy to allow to delay an arbitrary
(compile-time fixed) number of messages in succession.
This setting belongs to the individual connection, not to a configuration
shared by many connections. (If a default value is desired, that can be handled
by the application code that calls mbedtls_ssl_set_mtu().)
There are at least two ways in which this matters:
- per-connection settings can be adjusted if MTU estimates become available
during the lifetime of the connection
- it is at least conceivable that a server might recognize restricted clients
based on range of IPs and immediately set a lower MTU for them. This is much
easier to do with a per-connection setting than by maintaining multiple
near-duplicated ssl_config objects that differ only by the MTU setting.
This commit adds a new command line option `dgram_packing`
to the example server application programs/ssl/ssl_client2
allowing to allow/forbid the use of datagram packing.
This commit adds a new command line option `dgram_packing`
to the example server application programs/ssl/ssl_server2
allowing to allow/forbid the use of datagram packing.
For now, just check that it causes us to fragment. More tests are coming in
follow-up commits to ensure we respect the exact value set, including when
renegotiating.
sprintf( (char *) buf, "%s\r\n", base );
Above code generates Wformat-overflow warning since both buf and base
are of same size. buf should be sizeof( base ) + characters added in
the format. In this case format 2 bytes for "\r\n".
When MBEDTLS_MEMORY_BUFFER_ALLOC_C was defined, the sample ssl_server2.c was
using its own memory buffer for memory allocated by the library. The memory
used wasn't obvious, so this adds a macro for the memory buffer allocated to
make the allocated memory size more obvious and hence easier to configure.
Newer features in the library have increased the overall RAM usage of the
library, when all features are enabled. ssl_server2.c, with all features enabled
was running out of memory for the ssl-opt.sh test 'Authentication: client
max_int chain, server required'.
This commit increases the memory buffer allocation for ssl_server2.c to allow
the test to work with all features enabled.
Functions time with TIME_AND_TSC() didn't have their return values checked.
I'm not sure whether Coverity complained about existing uses, but it did about
new ones, since we consistently check their return values everywhere but here,
which it rightfully finds suspicious.
So, let's check return values. This probably adds a few cycles to existing
loop overhead, but on my machine (x86_64) the added overhead is less than the
random-looking variation between various runs, so it's acceptable.
Some calls had their own particular error checking; remove that in favour of
the new general solution.
* development: (180 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
* development: (182 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
