When building with MBEDTLS_MEMORY_DEBUG enabled, and running the ecdh part,
the benchmark program would start writing a very large number of space
characters on stdout, and would have to be killed because it never seemed to
terminate.
This was due to an integer overflow in computing how many space to leave after
the title in order to get memory measurements aligned, which resulted in up
to SIZE_MAX spaces being printed.
This commit just fixes the overflow, the next commit is going to fix the magic
number (12).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Don't mix Windows and Unix line endings, it's the worst of both worlds.
Update the Visual Studio templates and regenerate the generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Check Windows files for some issues, including permissions. Omit the
checks related to special characters (whitespace, line endings,
encoding) as appropriate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To test a file name exactly, prepend a / to the base name.
files_to_check actually checks suffixes, not file names, so rename it
to extensions_to_check.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The identifiers of the unmet dependencies of a test case are
stored in a buffer of fixed size that can be potentially too
small to store all the unmet dependencies. Indicate in test
report if some unmet dependencies are missing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix potential buffer overflow when tracking the unmet dependencies
of a test case. The identifiers of unmet dependencies are stored
in an array of fixed size. Ensure that we don't overrun the array.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use size_t for some variables that are array indices.
Use unsigned for some variables that are counts of "small" things.
This is a backport of commit 3c1c8ea3e7.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Adding .function was necessary, as otherwise ctags would have no idea what to
do with those files.
Adding .h may not be necessary, as by default ctags considers them C++ which
is probably good enough, but since we're tuning the mapping anyway...
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
See the comments in the code for how an attack would go, and the ChangeLog
entry for an impact assessment. (For ECDSA, leaking a few bits of the scalar
over several signatures translates to full private key recovery using a
lattice attack.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Warn about a gotcha that caused a bug in development.
Ensure that it's at least zeroed out, rather than uninitialized, in
non-verbose mode.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We keep track of the current epoch and record sequence number in out_ctr,
which was overwritten when writing the record containing the
HelloVerifyRequest starting from out_buf. We can avoid that by only using the
rest of the buffer.
Using MBEDTLS_SSL_MAX_CONTENT_LEN as the buffer size is still correct, as it
was a pretty conservative value when starting from out_buf.
Note: this bug was also fixed unknowingly in 2.13 by introducing a new buffer
that holds the current value of the sequence number (including epoch), while
working on datagram packing: 198594709b
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The current logging was sub-standard, in particular there was no trace
whatsoever of the HelloVerifyRequest being sent. Now it's being logged with
the usual levels: 4 for full content, 2 return of f_send, 1 decision about
sending it (or taking other branches in the same function) because that's the
same level as state changes in the handshake, and also same as the "possible
client reconnect" message" to which it's the logical continuation (what are we
doing about it?).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
There are currently 4 tests in ssl-opt.sh with either -C "resend" or -S
"resend", that is, asserting that no retransmission will occur. They sometimes
fail on loaded CI machines as one side doesn't send a message fast enough,
causing the other side to retransmit, causing the test to fail.
(For the "reconnect" test there was an other issue causing random failures,
fixed in a previous commit, but even after that fix the test would still
sometimes randomly fail, even if much more rarely.)
While it's a hard problem to fix in a general and perfect way, in practice the
probability of failures can be drastically reduced by making the timeout
values much larger.
For some tests, where retransmissions are actually expected, this would have
the negative effect of increasing the average running time of the test, as
each side would wait for longer before it starts retransmission, so we have a
trade-off between average running time and probability of spurious failures.
But for tests where retransmission is not expected, there is no such trade-off
as the expected running time of the test (assuming the code is correct most of
the time) is not impacted by the timeout value. So the only negative effect of
increasing the timeout value is on the worst-case running time on the test,
which is much less important, as test should only fail quite rarely.
This commit addresses the easy case of tests that don't expect retransmission
by increasing the value of their timeout range to 10s-20s. This value
corresponds to the value used for tests that assert `-S "autoreduction"` which
are in the same case and where the current value seems acceptable so far.
It also represents an increase, compared to the values before this commit, of
a factor 20 for the "reconnect" tests which were frequently observed to fail
in the CI, and of a factor 10 for the first two "DTLS proxy" tests, which were
observed to fail much less frequently, so hopefully the new values are enough
to reduce the probability of spurious failures to an acceptable level.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The server must check client reachability (we chose to do that by checking a
cookie) before destroying the existing association (RFC 6347 section 4.2.8).
Let's make sure we do, by having a proxy-in-the-middle inject a ClientHello -
the server should notice, but not destroy the connection.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
In x509.c, the self-test code is dependent on MBEDTLS_CERTS_C and
MBEDTLS_SHA256_C being enabled. At some point in the recent past that dependency
was on MBEDTLS_SHA1_C but changed to SHA256, but the comment wasn't updated.
This commit updates the comment.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Additional sanity checks in check_config.h to ensure:
* if test certificates are included (MBEDTLS_CERTS_C) there must be also be
support for the core X509 feature (MBEDTLS_X509_USE_C). This has a
secondary dependency on the public key abstraction layer (MBEDTLS_PK_C),
necessary as the certificates will either be signed by RSA or ECDSA, and
therefore need to be part of the library.
* if any of the TLS protocols are defined (MBEDTLS_SSL_PROTO_xxx) then a
key exchange method must also be defined (MBEDTLS_KEY_EXCHANGE_xxx).
Anyone who knows the library will probably not make these mistakes or will
quickly diagnose and fix them, but it is possible to compile and link both
configurations if you build only the library and not the example programs, and
therefore users may not realise immediately that there's a mistake, only
discovering it at runtime.
These checks may therefore save someone some time.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
- "Default" should only be used for tests that actually use the defaults (ie,
not passing options on the command line, except maybe debug/dtls)
- All tests in the "Encrypt then MAC" group should start with that string as a
common prefix
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
`pylint3 --version` will output to stderr the status of the config file it's
using. This can be "No config file found" or "Using config file" or nothing.
This means the pylint version may or may not be on the first line.
Therefore this commit changes the filters on the pylint3 version output to first
strip out the config line, and then to select only the pylint line.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Add the versions of Python, Perl, and Pylint to the version dump provided by
the output_env.sh script.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
A number of clean-up improvements following review.
* removal of redundant `` quotes
* removal of non-portable echo "\n", in favour of additional echo commands
* change to use of uname to detemine if the platform is Linux or not
* revised formatting of output
* change to dpkg-query from dpkg to find installed libasan variants
Co-Authored-By: Gilles Peskine <gilles.peskine@arm.com>
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
This commit adds additional information to the output_env.sh script of:
* Linux distribution version (if available)
* GDB version (if available)
It also makes some information clearer:
* the type of OpenSSL/GNUTLS version (legacy/default)
* and whether certain versions are not installed, or not configured
And it simplifies the error messages for absent tools.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
