For consistency across the code base, prefer
persistent over permanent to qualify a key
stored in persistent storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When looking for an empty key slot to store
the description of a key, if all key slots
are in use, reuse the first encountered
and unaccessed key slot containing the
description of a permanent key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The identifier of keys created/registred should be in
the application range.
This is by spec for key creation.
This may change for registered key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When key identifiers encode key owner, add tests
checking that:
. the key owner of an imported volatile key is
the one specified.
. a key identifier of a volatile key with a valid
PSA key identifier but the wrong owner is
rejected.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For persistent keys there were two successive
INVALIDATE_BY_(CLOSING/DESTROYING) identical tests
where the comments of the second test rather
indicated that it should had been an
INVALIDATE_BY_(CLOSING/DESTROYING)_WITH_SHUTDOWN test.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ways of invalidating keys before introducing
key purging tests because the "CLOSE_BY" prefix doesn't
get on well with the purge operation.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As handles are now key identifiers, a handle may be
valid now even if it does not refer to any key
known to the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The ccm tests were previously relying on unspecified behaviour in
the underlying implementation (i.e. that it rejects certain buffer
sizes without reading the buffer).
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
The CCM specification (NIST SP 800-38C) mandates that the formatting of
the additional data length l(a) changes when it is greater _or equal_ to
2^16 - 2^8 (>= 0xFF00). Since such lengths are not supported in mbed TLS,
the operation should fail in such cases.
This commit fixes an off-by-one error which allowed encryption/decryption
to be executed when l(a) was equal to 0xFF00, resulting in an
incorrect/non-standard length format being used.
Fixes#3719.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Stores bits in psa_persistent_key_storage_format.
* psa_load_persistent_key_into_slot still imports plaintext keys which
ensures that the bits value gets set.
* Updates key specification to match new implementation.
* Expands persistent store and load tests with to check for bits
attribute.
* Removes bits storage from psa_se_key_data_storage_t.
Signed-off-by: Torstein Nesse <torstein.nesse@silabs.com>
* #3742 After input of a key as SECRET in the derivation, allow the
derivation result to be used as key.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* #3741 Allow key agreement inside derivation with a key that's allowed
for the relevant agreement.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Test import and key generation, each followed by a key agreement. Only
good cases in this commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
... as opposed to PSA_ERROR_BAD_STATE.
The spec on psa_cipher_finish() states that PSA_ERROR_INVALID_ARGUMENT
should be returned when:
"The total input size passed to this operation is not valid for this
particular algorithm. For example, the algorithm is a based on block
cipher and requires a whole number of blocks, but the total input size
is not a multiple of the block size."
Currently, there is a distinction between encryption and decryption
on whether INVALID_ARGUMENT or BAD_STATE is returned, but this is not
a part of the spec.
This fix ensures that PSA_ERROR_INVALID_ARGUMENT is returned
consistently on invalid cipher input sizes.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Reworked the cipher context once again to be more robustly defined
* Removed redundant memset
* Unified behaviour on failure between driver and software in cipher_finish
* Cipher test driver setup function now also returns early when its status
is overridden, like the other test driver functions
* Removed redundant test cases
* Added bad-order checking to verify the driver doesn't get called where
the spec says it won't.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
ssl_tls1_3_keys.c exports a structure containing all labels used
in the TLS 1.3 key schedule, but the TLS 1.3 key scheduling unit
tests so far replicated those labels in the test file. In particular,
wrong label values in ssl_tls1_3_keys.c wouldn't have been caught
by the unit tests.
This commit modifies the TLS 1.3 key schedule unit tests to use
the TLS 1.3 labels as exported by ssl_tls1_3_keys.c. This not only
makes sure that those labels are correct, but also avoids hardcoding
their hex-encoding in the test file.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The pk_ec_test_vec() was incorrectly using MBEDTLS_MD_SHA1 for the
parameter to mbedtls_pk_verify(). It should use MBEDTLS_MD_NONE since
that parameter is ignored for this test case.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The relevant test functions are already marked as depending on
`MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL`, so there's no need
to re-state this dependency for each test case.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
* Moved test data to .data file
* Bundled test driver hook variables in a struct
* Style fixes
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Trying to compile in the PSA accelerator test driver under MBEDTLS_TEST_HOOKS
turned out to be awkward regarding existing builds. We'll put it under a
custom (not in config.h) define instead, since it's something that only
should happen in test.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The test function mbedtls_mpi_lt_mpi_ct did not initialize ret in test
code. If there was a bug in library code whereby the library function
mbedtls_mpi_lt_mpi_ct() did not set ret when it should, we might have
missed it if ret happened to contain the expected value. So initialize
ret to a value that we never expect.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To test the proper handling of owner identifier as of key
identifiers, add owner identifier(s) to tests having
key identifier(s) as test parameters. Just don't do it for
tests related to tests invalid values of key identifiers
as there is no owner identifier invalid values.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Delete key files based on declaration by test cases and
not based on a hardcoded list of identifiers as in
test_suite_psa_crypto_slot_management.function. This fixes
the fact that in case of error the file associated to the
key identifier PSA_KEY_ID_VENDOR_MAX was not purged
(register_key_smoke_test test function).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove systematic deletion of key file associated to key
identifier 0 as this file is not created under the hood
anymore by the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix PSA code and unit tests for the unit tests
to pass with key identifiers encoding owner
identifiers.
The changes in PSA code just make the enablement
of key identifiers encoding owner identifiers
platform independent. Previous to this commit,
such key identifiers were used only in the case
of PSA SPM platforms.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define always psa_key_id_t as defined in the PSA
Cryptography API specification independently of
whether the MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration file is set or not.
As a consequence, get rid of `psa_app_key_id_t` that is
not needed anymore.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of this commit and the following is for
psa_key_id_t to always be as defined by the PSA
Cryptography API specification.
Currently psa_key_id_t departs from its specification
definition when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration flag is set. In that configuration, it is set
to be equal to psa_key_file_id_t which in that configuration
encodes an owner identifier along the key identifier.
Type psa_key_file_id_t was meant to be the key identifier type
used throughout the library code. If
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is set it
includes both a key and owner identifier, otherwise it is
equal to psa_key_id_t.
It has not been the key identifier type throughout the
library so far because when the PSA Cryptography
specification was developped the library Doxygen
documentation was used to generate the PSA Cryptography API
specification thus the need to use psa_key_id_t and not
psa_key_file_id_t.
As this constraint does not hold anymore, move
to psa_key_file_id_t as the key identifier type throughout
the library code.
By the way, this commit updates the key identifier
initialization in the tests to be compatible with a
composit key identifier. A psa_key_id_make()
inline function is introduced to initialize key
identifiers (composit ot not) at runtime.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
If test_fail is called multiple times in the same test case, report
the location of the first failure, not the last one.
With this change, you no longer need to take care in tests that use
auxiliary functions not to fail in the main function if the auxiliary
function has failed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Return a name that more clearly returns nonzero=true=good, 0=bad. We'd
normally expect check_xxx to return 0=pass, nonzero=fail so
check_parity was a bad name.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An early draft of the PSA crypto specification required multipart
operations to keep working after destroying the key. This is no longer
the case: instead, now, operations are guaranteed to fail. Mbed TLS
does not comply yet, and still allows the operation to keep going.
Stop testing Mbed TLS's non-compliant behavior.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rely on Asan to detect a potential buffer overflow, instead of doing a
manual check. This makes the code simpler and Asan can detect
underflows as well as overflows.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the cleanup code for persistent_key_load_key_from_storage(), we
only attempt to reopen the key so that it will be deleted if it exists
at that point. It's intentional that we do nothing if psa_open_key()
fails here.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If any of the TEST_ASSERT()s that are before the call to
mbedtls_pk_warp_as_opaque() failed, when reaching the exit label
psa_destroy_key() would be called with an uninitialized argument.
Found by Clang.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
The documentation of mbedtls_pk_wrap_as_opaque is quite clear:
* \param handle Output: a PSA key handle.
* It's the caller's responsibility to call
* psa_destroy_key() on that handle after calling
* mbedtls_pk_free() on the PK context.
But the test failed to call psa_destroy_key().
While at it, also use PSA_DONE(): it ensures that if we fail to destroy the
key, we'll get an explicit error message about it without the need for
valgrind.
This is a preliminary to adding a valgrind-based test for constant-flow code:
we need to make sure the rest of the tests are fully valgrind-clean, which
they weren't.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The tests are supposed to be failing now (in all.sh component
test_memsan_constant_flow), but they don't as apparently MemSan doesn't
complain when the src argument of memcpy() is uninitialized, see
https://github.com/google/sanitizers/issues/1296
The next commit will add an option to test constant flow with valgrind, which
will hopefully correctly flag the current non-constant-flow implementation.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
RFC5280 does not state that the `revocationDate` should be checked.
In addition, when no time source is available (i.e., when MBEDTLS_HAVE_TIME_DATE is not defined), `mbedtls_x509_time_is_past` always returns 0. This results in the CRL not being checked at all.
https://tools.ietf.org/html/rfc5280
Signed-off-by: Raoul Strackx <raoul.strackx@fortanix.com>
* development: (55 commits)
Log change as bugfix
Add changelog entry
Clarify updates to the persistent state in storage
With multiple applicable transparent drivers, the order is unspecified
Minor clarifications
Give some examples of purpsoses of pure-software transparent driver
Fix typos
Add a link to the PSA API specification
Explain locations vs lifetimes
Initialize key pointer in ecdh to NULL
Add buffer zeroization when ecp_write_key fails
Simplified key slot deletion
Style fixes
Use arc4random_buf instead of rand on NetBSD
Apply review feedback
Update open question section about public key storage
Remove the paragraph about declaring application needs
Change driver persistent data to a callback interface
Rework and expand key management in opaque drivers
Fix typos and copypasta
...
Since it is being dereferenced by free on exit it should be inited to NULL.
Also added a small test that would trigger the issue.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
PSA Crypto was checking the byte length of a to-be-imported public ECP key
against the expected length for Weierstrass keys, forgetting that
Curve25519/Curve448 exists.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The usage of "!memcmp()" is at least not recommended
and better to use the macro dedicated for buffer
comparisons.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The convention from the TLS RFC is a bit unusual, so even if the test
function's introductory comment mentions that we're taking the RFC's
definition, it doesn't hurt to repeat it in crucial places.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Passing a length of 0 to it is perfectly acceptable, the macro was designed to
handle it correctly.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We only have a single integer available for two nested loops, but the loop
sizes are small enough compared to the integer's range that we can encode both
indexes. Since the integer is displayed in decimal in case of errors, use a
power of 10 to pack the two indexes together.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently this breaks all.sh component test_memsan_constant_flow, just as
expected, as the current implementation is not constant flow.
This will be fixed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Everything works at the byte level, not bit level. Flipping the lsb is just
one convenient way to corrupt a byte, but don't really care about individual
bits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add a few more negative test cases for mbedtls_x509_crl_parse.
The test data is manually adapted from the existing positive test case
"X509 CRL ASN1 (TBSCertList, sig present)" which decomposes as
305c
3047 tbsCertList TBSCertList
020100 version INTEGER OPTIONAL
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
300f issuer Name
310d300b0603550403130441424344
170c303930313031303030303030 thisUpdate Time
3014 revokedCertificates
3012 entry 1
8202abcd userCertificate CertificateSerialNumber
170c303831323331323335393539 revocationDate Time
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
03020001 signatureValue BIT STRING
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function now depends on MBEDTLS_TEST_HOOKS, which is enabled by
config.py full, and since there are already components in all.sh exercising
the full config, this test function is sill exercised even with this new
dependency.
Since this is the first time a test function depends on MBEDTLS_TEST_HOOKS,
fix a bug in check-names.sh that wasn't apparent so far: headers from
library/*.h were not considered when looking for macro definitions. This
became apparent because MBEDTLS_STATIC_TESTABLE is defined in library/common.h
and started being used in library/ssl_msg.c, so was flagged as a likely typo.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The dummy implementation is not constant-flow at all for now, it's just
here as a starting point and a support for developing the tests and putting
the infrastructure in place.
Depending on the implementation strategy, there might be various corner cases
depending on where the lengths fall relative to block boundaries. So it seems
safer to just test all possible lengths in a given range than to use only a
few randomly-chosen values.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The ssl_tranform structure lacks some members accessed by this function when
CBC is not enabled.
This was found by test-ref-configs.pl and all.sh
test_when_no_ciphersuites_have_mac, so no need to add a new test.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Started as copies of the AES block, then:
- for ARIA, just s/AES/ARIA/
- for Camellia, just s/AES/Camellia/
- for 3DES, s/AES/3DES/ then s/3DES_128_CBC/DES_EDE3_CBC/ then manually
subtract 8 to all plaintext lengths that were > 8. This accounts for the
fact that the block size of DES is 8 not 16.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
All started from a copy of the SHA256 block and modified as follows:
- for MD5, just s/SHA256/MD5/
- for SHA384, adapt the dependency line then s/SHA256/SHA384
- for SHA1, s/SHA256/SHA1/ then manually adapt the plaintext length for the
cases with "!trunc, B-1" and "!trunc, B", as the MAC length (20) is not a
multiple of the block size (16) for this hash
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- plaintext length = 0 or 1
- plaintext length + MAC length = -1 or 0 mod block_size
(using the minimum plaintext length that works)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Compared to the previous approach of having the bad padding provided as input
to the testing function, this allows to test more kinds of incorrect data,
with less test cases in the .data file and more important no manually-generated
non-trivial data in the test case parameters, making it much easier to
complete the testing matrix.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
PSA_ALG_ECB_NO_PADDING came in to the PSA Crypto API spec v1.0.0, but
was not implemented yet in the mbed TLS implementation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
They did not match their description, probably due to a botched manual
endianness conversion where the nibbles also got swapped.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Follow the PSA Crypto specification which was updated between 1.0 beta3
and 1.0.0.
Add corresponding test cases.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
mbedtls_ecp_write_key is a mirror function to mbedtls_ecp_read_key, which
writes a private key back into a byte buffer in the correct format.
This is a helpful convenience function, since the byte order is defined
differently between Montgomery and Weierstrass curves. Since this difference
is accounted for in mbedtls_ecp_read_key, it made sense to add
mbedtls_ecp_write_key for the purpose of abstracting this away such that
psa_export_key doesn't need to take byte order into account.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This makes the implementation of mbedtls_param_failed()
for testing purpose available to programs. Thus removing
the ad-hoc implementations in programs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, isolate mbedtls_param_failed() long
jump data and set up from unit test data and code.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, isolate mbedtls_param_failed() call check
from unit test data.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, move mbedtls_param_failed() call location
record into a context dedicated to mbedtls_param_failed().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Do not hexify binary data to compare them, do compare
them directly. That simplifies the check code and save
memory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove `hex` in name of variables of type data_t to reserve it
for variables of type char* that are the hexadecimal
representation of a data buffer.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Executed "./scripts/bump_version.sh --version 2.23.0 --so-crypto 5"
A symbol has been removed from the mbedcrypto library since the last
release:
mbedtls_ecc_group_to_psa ( enum mbedtls_ecp_group_id grpid,
size_t* bits )
This is an ABI break and we need to increase the SO version.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The metadata tests depend on the corresponding feature because there
is no guarantee that the metadata is correct if the feature is
disabled. There are metadata test cases for some algorithms and key
types that are declared but not supported. These test cases are
present but can never run.
It is debatable whether having these test cases is a good thing in
case they become runnable in the future, or a bad thing because
they're dead code. We're working on detecting test cases that are
never executed for accidental reasons (e.g. typo in a dependency or
missing configuration on the CI), and having test cases that are
deliberately never executed messes this up. So remove these test
cases. If we do implement the corresponding feature, it'll be easy to
add the corresponding metadata test cases.
The features that had metadata tests but no implementations were:
* SHA-512/256 and SHA-512/224 (hypothetical dependency: MBEDTLS_SHA512_256)
* DSA (hypothetical dependency: MBEDTLS_DSA_C)
* SHA-3 and HMAC-SHA-3 (hypothetical dependency: MBEDTLS_SHA3_C)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rework mbedtls_test_unhexify to extend its scope of usage.
Return in error when the function detects an error instead
of calling mbedtls_exit().
Improve safety by checking the output buffer is not overrun.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In test functions calling mbedtls_test_unhexify(), change the
type of the associated parameters from `char*` to `data_t`.
That way the `unhexify` operation is done by the test
framework and not by the unit test code.
Use for the new parameters of type data_t the name of the
local variable that use to store the `unhexify` version of
the `char*` parameter.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of mbedtls_ccm_star_encrypt_and_tag/auth_decrypt from
`char *` to `data_t` to get rid of the calls to
mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
- Use two different buffers to store the plain and cipher
text as expected by the library functions.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of aes_encrypt_ofb() from `char *` to `data_t` to get rid
of the calls to mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
- Add assertion on fragment_size parameter
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of mbedtls_nist_kw_wrap/unwrap() from `char *` to `data_t`
to get rid of the calls to mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters of
test_chacha20() from `char *` to `data_t` to get rid of the
calls to mbedtls_test_unhexify():
- Reduce the size of output[] buffer to 375 as its content
is "ASCII expended" into a buffer of 751 bytes.
- Align naming of variables to store and check the
output of mbedtls_chacha20_crypt(). No *dst* variables
anynore, only *output* variables.
- Use two different buffers to store the expected output
of mbedtls_chacha20_crypt() (expected_output_str[]) and
the ASCII string representation of the output of
mbedtls_chacha20_crypt() (output_string[]). Both were
stored in dst_str[] before.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of test_hkdf() from `char *` to `data_t` to get rid of the
calls to mbedtls_test_unhexify():
- Align naming of variables related to the expected okm
- Rename `okm_hex[]` to `okm_string[]`
- Added TEST_ASSERT( expected_okm_len <= sizeof( okm ) ) to check
that the okm[] buffer is large enough for the okm output.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of some test functions from `char *` to `data_t` to get
rid of the calls to mbedtls_test_unhexify():
- Align the name of source data length local variable
with the name of the local variable containing the
source data, respectively src_str and src_str_len.
- Change the type of length, index local variables
from int to size_t.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Pass the "certificate policies" extension to the callback supplied to
mbedtls_x509_crt_parse_der_with_ext_cb() if it contains unsupported
policies. This allows the callback to fully replicate the behaviour
of the deprecated MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
configuration.
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
Another coverity bug - #350039
When this test discovers a key of the wrong type, it still throws it
through the export function in order to check that it too will detect
this as a not permitted action. For the buffer and buffer length
arguments it passes in a local pointer (which will most likely be NULL),
and the sizeof that pointer, as it knows that they will never be used.
Coverity rightly (imho) flagged this as suspicious - if we are going to
pass in incorrect parameters, at least make them obviously incorrect, and
ones that will not potentially cause errors if the code later changes.
There is, for example safety checks for zero length buffer, but less
protection for an insufficiently sized one.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep "\<mbedtls_test_rnd_"
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexcmp
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep unhexify_alloc
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexify
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of random.c file is to contain the helper
functions to generate random numbers that have been
in helpers.function so far.
The purpose of random.h is to contain the interface
exposed by random.c thus helper function prototypes.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of helpers.c file is to contain the helper
functions that have been in helpers.function so far and
that are not related to the mechanism of unit test
execution and not related to random number generation
(will be moved in a dedicated file).
The purpose of helpers.h is to contain the interface
exposed by helpers.c thus helper function prototypes.
Make the changes in the build systems (make and cmake)
to build helpers.c and link it to test executables
along with mbedtls library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix for coverity bugs 349041, 349052
Allocated pointers could potentially be leaked in the case of errors.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Strict platforms cannot be expected to accept C99 code as valid
when earlier standards versions are selected.
This helps the programs build on Solaris-like platforms (e.g.
illumos).
Fixes#3420
Signed-off-by: nia <nia@netbsd.org>
Just adding an empty file. The purpose of this header
file is to contain the definition of generic macros
used for the purpose of testing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving the content of helpers.function
to its own compilation unit, remove/add static qualifiers
where appropriate.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Create an include folder dedicated to include files for
tests. With the upcoming work on tests for PSA crypto
drivers the number of includes specific to tests is going
to increase significantly thus create a dedicated folder.
Don't put the include files in the include folder but in
include/test folder. This way test headers can be included
using a test/* path pattern as mbedtls and psa headers
are included using an mbedtls/* and psa/* path pattern.
This makes explicit the scope of the test headers.
Move the existing includes for tests into include/test and
update the code and build systems (make and cmake)
accordingly.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add the min/max version negotiation tests from ssl-opt.sh as unit
tests for the sake of utility and easier running of tests during
development
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Invasive testing strategy
Create a new header `common.h`.
Introduce a configuration option `MBEDTLS_TEST_HOOKS` for test-specific code, to be used in accordance with the invasive testing strategy.
While at it, declare deps on ENTROPY as well.
A non-regression test will be added in a follow-up commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
TLS 1.3 and DTLS 1.2 + CID hide the real content type of a record
within the record's inner plaintext, while always using the same
content type for the protected record:
- TLS 1.3 always uses ApplicationData
- DTLS 1.2 + CID always uses a special CID content type.
This commit enhances the record encryption unit test to check
that the record content type is indeed correctly hidden.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Now that lifetimes have structures and secure element drivers handle
all the lifetimes with a certain location, update driver registration
to take a location as argument rather than a lifetime.
This commit updates the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
<stdio.h> only declares the non-ISO-C function fileno() if an
appropriate POSIX symbol is defined or if using a compiler such as GCC
in non-pedantic mode. Define the appropriate POSIX symbol.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When parsing a certificate with the basic constraints extension
the max_pathlen that was read from it was incremented regardless
of its value. However, if the max_pathlen is equal to INT_MAX (which
is highly unlikely), an undefined behaviour would occur.
This commit adds a check to ensure that such value is not accepted
as valid. Relevant tests for INT_MAX and INT_MAX-1 are also introduced.
Certificates added in this commit were generated using the
test_suite_x509write, function test_x509_crt_check. Input data taken
from the "Certificate write check Server1 SHA1" test case, so the generated
files are like the "server1.crt", but with the "is_ca" field set to 1 and
max_pathlen as described by the file name.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Enable MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 in the full config. There's
no reason to keep it out. We weren't testing it at all on the CI.
Add a missing dependency on !MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 to
some test cases that either were testing that v3 extensions are only
accepted in v3 certificates, or where parsing returns a different
error when MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 is enabled.
Add a few positive and negative test cases with
MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 enabled.
Fix one test case with MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 where the
intended output of mbedtls_x509_crt_info had changed in
890819a597 but the test case was missed
because it was never executed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit introduces two changes:
- Add in_msg and out_msg calculations for buffer upsizing. This was previously
considered as unnecessary, but renegotiation using certain ciphersuites needs
this.
- Improving the way out_msg and in_msg pointers are calculated, so that even
if no resizing is introduced, the pointers remain the same;
New tests added:
- various renegotiation schemes with a range of MFL's and ciphersuites;
- an ssl-opt.sh test exercising two things that were problematic: renegotiation
with TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 and a server MFL that's smaller
than the one negotiated by the client.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The identifiers of the unmet dependencies of a test case are
stored in a buffer of fixed size that can be potentially to
small to store all the unmet dependencies. Indicate in test
reports if some unmet dependencies are missing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
