We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* development_2.x:
Reword changelog - Test Resource Leak
Fix fd range for select on Windows
Refactor file descriptor checks into a common function
Update changelog formatting - Missing Free Context
Update changelog formatting Missing Free Context
Update changelog formatting - Missing Free Context
Changelog entry for Free Context in test_suite_aes fix
Free context in at the end of aes_crypt_xts_size()
Fix copypasta in test data
Use UNUSED wherever applicable in derive_input tests
Fix missing state check for tls12_prf output
Key derivation: add test cases where the secret is missing
Add bad-workflow key derivation tests
More explicit names for some bad-workflow key derivation tests
in file tests/suite/test_suite_aes.function, aes_crypt_xts_size()
did not free the context upon the function exit.
The function now frees the context on exit.
Fixes#4176
Signed-off-by: JoeSubbiani <Joe.Subbiani@arm.com>
Add HKDF tests where the sequence of inputs differs from the nominal
case: missing step, duplicate step, step out of order, or invalid step.
There were already similar tests for TLS 1.2 PRF. Add one with a key
agreement which has slightly different code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Do more iterations with small values. This makes it more likely that a
mistake on bounds will be detected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Slightly simplify is_significantly_above_a_power_of_2() to make it
easier to understand:
* Remove the explicit negative answer for x <= 4. The only functional
difference this makes is that is_significantly_above_a_power_of_2(3)
is now true.
* Shift the most significant bit of x to position 8 rather than 15.
This makes the final comparison easier to explain.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for mbedtls_mpi_fill_random() and mbedtls_mpi_random()
when the resulting MPI object previously had a nonzero value. I wrote
those to catch a bug that I introduced during the development of
mbedtls_mpi_random() (but does not appear in a committed version).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_random() uses mbedtls_mpi_cmp_mpi_ct(), which requires its
two arguments to have the same storage size. This was not the case
when the upper bound passed to mbedtls_mpi_random() had leading zero
limbs.
Fix this by forcing the result MPI to the desired size. Since this is
not what mbedtls_mpi_fill_random() does, don't call it from
mbedtls_mpi_random(), but instead call a new auxiliary function.
Add tests to cover this and other conditions with varying sizes for
the two arguments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values and keys in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted code,
use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_dhm_make_params() with x_size != size of P is not likely to be
useful, but it's supported, so test it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Repeat a few tests that use random data. This way the code is
exercised with a few different random values.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Improve the validation of the output from mbedtls_dhm_make_params:
* Test that the output in the byte buffer matches the value in the
context structure.
* Test that the calculated values are in the desired range.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename mbedtls_ecp_gen_privkey_sw to mbedtls_mpi_random since it has
no particular connection to elliptic curves beyond the fact that its
operation is defined by the deterministic ECDSA specification. This is
a generic function that generates a random MPI between 1 inclusive and
N exclusive.
Slightly generalize the function to accept a different lower bound,
which adds a negligible amount of complexity.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for private key generation on short Weierstrass curves.
These tests validate that the result is within the desired range.
Additionally, they validate that after performing many iterations, the
range is covered to an acceptable extent: for tiny ranges, all values
must be reached; for larger ranges, all value bits must reach both 0
and 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't calculate the bit-size of the initially generated random number.
This is not necessary to reach the desired distribution of private
keys, and creates a (tiny) side channel opportunity.
This changes the way the result is derived from the random number, but
does not affect the resulting distribution.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The library rejected an RNG input of all-bits-zero, which led to the
key 2^{254} (for Curve25519) having a 31/32 chance of being generated
compared to other keys. This had no practical impact because the
probability of non-compliance was 2^{-256}, but needlessly
complicated the code.
The exception was added in 98e28a74e3 to
avoid the case where b - 1 wraps because b is 0. Instead, change the
comparison code to avoid calculating b - 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test the exact output from known RNG input. This is overly
constraining, but ensures that the code has good properties.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If a fallback is not explicitly configured in the
mbedtls_test_rnd_buf_info structure, fail after the buffer is
exhausted.
There is no intended behavior change in this commit: all existing uses
of mbedtls_test_rnd_buffer_rand() have been updated to set
mbedtls_test_rnd_std_rand as the fallback.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The call to `tests/scripts/generate_psa_tests.py` added by the commit
"generate_psa_tests.py: allow generating each file independently"
assumed that the `check` function supports multiple file names, but in
fact it does not do so. When `generate_psa_tests.py` started generating
more than one file, `check-generated-files.sh` did not detect changes to
files other than the first one listed by `generate_psa_tests.py --list`.
Fix this: change `check` to support either a single directory (with
detection of added/removed files) or a list of files (which is assumed
to be static).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generating expressions to construct test case data, there can be
duplicate values, for example if a value of the form C(A) is present
as such in test_suite_psa_crypto_metadata.data and also constructed by
enumerating the argument A for the constructor C. Eliminate such
duplicates in generate_expressions.
This commit removes many test cases that were exact duplicates (and
were near-duplicates differing only in whitespace before the
whitespace normalization).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In macro_collector.py, base InputsForTest on PSAMacroEnumerator rather
than PSAMacroCollector. It didn't make much sense to use
PSAMacroCollector anymore since InputsForTest didn't use anything
other than the constructor.
psa_generate_tests now generates arguments for more macros.
In particular, it now collects macro arguments from
test_suite_psa_crypto_metadata. Algorithms with parameters are now
supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
