Make sure that if a buffer is allowed to be empty, a null pointer is
accepted if the buffer length is 0. This was already the case for most
but not all arguments to mbedtls_cipher_auth_{en,de}crypt{,_ext}.
Make sure to pass NULL for an empty buffer in the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run all the addition and subtraction tests with the result aliased to
the first operand and with the result aliased to the second operand.
Before, only some of the aliasing possibilities were tested, for only
some of the functions, with only some inputs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fixes an issue where configs that had `MBEDTLS_MPI_MAX_BITS` greater than 256
but smaller than the test that was running (792 bits) the test would fail
incorrectly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Move dependancy on `MBEDTLS_MPI_MAX_BITS` to apply to the specific test cases
which will break when `MBEDTLS_MPI_MAX_BITS` is too small. This re-enables
previous tests that were turned off accidentally.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Previously `mbedtls_mpi_exp_mod` was tested with values that were over
`MBEDTLS_MPI_MAX_SIZE` in size. This is useful to do as some paths are only
taken when the exponent is large enough however, on builds where
`MBEDTLS_MPI_MAX_SIZE` is under the size of these test values.
This fix turns off these tests when `MBEDTLS_MPI_MAX_SIZE` is too small to
safely test (notably this is the case in config-thread.h).
Signed-off-by: Chris Jones <christopher.jones@arm.com>
In two test cases, the exponentiation computation was not being fully tested
as when A_bytes (the base) == N_bytes (the modulus) -> A = N. When this is the
case A is reduced to 0 and therefore the result of the computation will always
be 0.
This fixes that issue and therefore increases the test coverage to ensure
different computations are actually being run.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reword test cases to be easier to read and understand.
Adds comments to better explain what the test is doing.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
This temporarily breaks all.sh '*deprecated*' (deprecated functions still used
in the library), which will be fix in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We want to test both sets of functions (ext and non-ext) in turn, so goto exit
is not really and option.
Also, separate setting up the context (which is going to be the same for both
ext and non-ext functions) from setting up the buffers (which will vary).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add two further boundary tests for cases where both the exponent and modulus to
`mbedtls_mpi_exp_mod()` are `MBEDTLS_MPI_MAX_SIZE`, or longer, bytes long.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
* development: (488 commits)
Fix removal of deprecated PSA constants
Use GitHub-compatible table formatting
Remove psa header files in uninstall part
Change function casting in `ssl_calc_finished_tls_sha384`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Add changelog entry file to `ChangeLog.d`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Fix GCC warning about `test_snprintf`
Fix mismatched function parameters (prototype/definition)
Fix build failure on gcc-11
Copyediting
Clarifications around key import
Fix copypasta
A variable is unused in some configurations
Rename test_driver_keygen to test_driver_key_management
Move "internal use" sentence attached to the wrong function
Added changelog
Plug in the entry point for public key export through driver
tests: psa: Reset key attributes where needed
Improve/fix documentation
...
Adds test cases to ensure that `mbedtls_mpi_exp_mod` will return an error with
an exponent or modulus that is greater than `MBEDTLS_MPI_MAX_SIZE` in size.
Adds test cases to ensure that Diffie-Hellman will fail to make a key pair
(using `mbedtls_dhm_make_public`) when the prime modulus is greater than
`MBEDTLS_MPI_MAX_SIZE` in size.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a test case to ensure `mbedtls_mpi_exp_mod` fails when using a key size
larger than MBEDTLS_MPI_MAX_SIZE.
Add a test case to ensure that Diffie-Hellman operations fail when using a key
size larger than MBEDTLS_MPI_MAX_SIZE.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add missing tag check for algorithm parameters when comparing the
signature in the description part of the cert against the actual
signature whilst loading a certificate. This was found by a
certificate (created by fuzzing) that openssl would not verify, but
mbedtls would.
Regression test added (one of the client certs modified accordingly)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ctr_drbg_set_reseed_interval() and
mbedtls_hmac_drbg_set_reseed_interval() can now be called before
their seed functions and the reseed_interval value will persist.
Previously it would be overwritten with the default value.
*_drbg_reseed_interval is now set in init() and free().
mbedtls_ctr_drbg_free() and mbedtls_hmac_drbg_free() now
reset the drbg context to the state immediately after init().
Tests:
- Added test to check that DRBG reseeds when reseed_counter
reaches reseed_interval, if reseed_interval set before seed
and reseed_interval is less than MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
Signed-off-by: gacquroff <gavina352@gmail.com>
Positive tests: test that the RNG has the expected size, given that we
know how many leading zeros it has because we know how the function
consumes bytes and when the test RNG produces null bytes.
Negative tests: test that if the RNG is willing to emit less than the
number of wanted bytes, the function fails.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
GCC 11 generated the warnings because the parameter `ret_buf`
was declared as `const char[10]`, but some of the arguments
provided in `run_test_snprintf` are shorter literals, like "".
Now the type of `ret_buf` is `const char *`.
Both implementations of `test_snprintf` were fixed.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
Support using HMAC_DRBG instead of CTR_DRBG in the PSA subsystem.
Use HMAC_DRBG if CTR_DRBG is available. Choose between SHA-256 and
SHA-512 based on availability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Implement support for MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG.
For test purposes, write an implementation that uses libc rand().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
After a call to psa_get_key_attributes() to retrieve
the attributes of a key into a psa_key_attributes_t
structure, a call to psa_reset_key_attributes() is
mandated to free the resources that may be
referenced by the psa_key_attributes_t structure.
Not calling psa_reset_key_attributes() may result in
a memory leak.
When a test function calls psa_get_key_parameters()
the associated key attributes are systematically
reset in the clean-up part of the function with a
comment to emphasize the need for the reset and make
it more visible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For consistency across the code base, prefer
persistent over permanent to qualify a key
stored in persistent storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When looking for an empty key slot to store
the description of a key, if all key slots
are in use, reuse the first encountered
and unaccessed key slot containing the
description of a permanent key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The identifier of keys created/registred should be in
the application range.
This is by spec for key creation.
This may change for registered key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When key identifiers encode key owner, add tests
checking that:
. the key owner of an imported volatile key is
the one specified.
. a key identifier of a volatile key with a valid
PSA key identifier but the wrong owner is
rejected.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For persistent keys there were two successive
INVALIDATE_BY_(CLOSING/DESTROYING) identical tests
where the comments of the second test rather
indicated that it should had been an
INVALIDATE_BY_(CLOSING/DESTROYING)_WITH_SHUTDOWN test.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ways of invalidating keys before introducing
key purging tests because the "CLOSE_BY" prefix doesn't
get on well with the purge operation.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As handles are now key identifiers, a handle may be
valid now even if it does not refer to any key
known to the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The ccm tests were previously relying on unspecified behaviour in
the underlying implementation (i.e. that it rejects certain buffer
sizes without reading the buffer).
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
The CCM specification (NIST SP 800-38C) mandates that the formatting of
the additional data length l(a) changes when it is greater _or equal_ to
2^16 - 2^8 (>= 0xFF00). Since such lengths are not supported in mbed TLS,
the operation should fail in such cases.
This commit fixes an off-by-one error which allowed encryption/decryption
to be executed when l(a) was equal to 0xFF00, resulting in an
incorrect/non-standard length format being used.
Fixes#3719.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Stores bits in psa_persistent_key_storage_format.
* psa_load_persistent_key_into_slot still imports plaintext keys which
ensures that the bits value gets set.
* Updates key specification to match new implementation.
* Expands persistent store and load tests with to check for bits
attribute.
* Removes bits storage from psa_se_key_data_storage_t.
Signed-off-by: Torstein Nesse <torstein.nesse@silabs.com>
* #3742 After input of a key as SECRET in the derivation, allow the
derivation result to be used as key.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* #3741 Allow key agreement inside derivation with a key that's allowed
for the relevant agreement.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Test import and key generation, each followed by a key agreement. Only
good cases in this commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
... as opposed to PSA_ERROR_BAD_STATE.
The spec on psa_cipher_finish() states that PSA_ERROR_INVALID_ARGUMENT
should be returned when:
"The total input size passed to this operation is not valid for this
particular algorithm. For example, the algorithm is a based on block
cipher and requires a whole number of blocks, but the total input size
is not a multiple of the block size."
Currently, there is a distinction between encryption and decryption
on whether INVALID_ARGUMENT or BAD_STATE is returned, but this is not
a part of the spec.
This fix ensures that PSA_ERROR_INVALID_ARGUMENT is returned
consistently on invalid cipher input sizes.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Reworked the cipher context once again to be more robustly defined
* Removed redundant memset
* Unified behaviour on failure between driver and software in cipher_finish
* Cipher test driver setup function now also returns early when its status
is overridden, like the other test driver functions
* Removed redundant test cases
* Added bad-order checking to verify the driver doesn't get called where
the spec says it won't.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
ssl_tls1_3_keys.c exports a structure containing all labels used
in the TLS 1.3 key schedule, but the TLS 1.3 key scheduling unit
tests so far replicated those labels in the test file. In particular,
wrong label values in ssl_tls1_3_keys.c wouldn't have been caught
by the unit tests.
This commit modifies the TLS 1.3 key schedule unit tests to use
the TLS 1.3 labels as exported by ssl_tls1_3_keys.c. This not only
makes sure that those labels are correct, but also avoids hardcoding
their hex-encoding in the test file.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The pk_ec_test_vec() was incorrectly using MBEDTLS_MD_SHA1 for the
parameter to mbedtls_pk_verify(). It should use MBEDTLS_MD_NONE since
that parameter is ignored for this test case.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The relevant test functions are already marked as depending on
`MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL`, so there's no need
to re-state this dependency for each test case.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
* Moved test data to .data file
* Bundled test driver hook variables in a struct
* Style fixes
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Trying to compile in the PSA accelerator test driver under MBEDTLS_TEST_HOOKS
turned out to be awkward regarding existing builds. We'll put it under a
custom (not in config.h) define instead, since it's something that only
should happen in test.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The test function mbedtls_mpi_lt_mpi_ct did not initialize ret in test
code. If there was a bug in library code whereby the library function
mbedtls_mpi_lt_mpi_ct() did not set ret when it should, we might have
missed it if ret happened to contain the expected value. So initialize
ret to a value that we never expect.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To test the proper handling of owner identifier as of key
identifiers, add owner identifier(s) to tests having
key identifier(s) as test parameters. Just don't do it for
tests related to tests invalid values of key identifiers
as there is no owner identifier invalid values.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Delete key files based on declaration by test cases and
not based on a hardcoded list of identifiers as in
test_suite_psa_crypto_slot_management.function. This fixes
the fact that in case of error the file associated to the
key identifier PSA_KEY_ID_VENDOR_MAX was not purged
(register_key_smoke_test test function).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove systematic deletion of key file associated to key
identifier 0 as this file is not created under the hood
anymore by the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix PSA code and unit tests for the unit tests
to pass with key identifiers encoding owner
identifiers.
The changes in PSA code just make the enablement
of key identifiers encoding owner identifiers
platform independent. Previous to this commit,
such key identifiers were used only in the case
of PSA SPM platforms.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define always psa_key_id_t as defined in the PSA
Cryptography API specification independently of
whether the MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration file is set or not.
As a consequence, get rid of `psa_app_key_id_t` that is
not needed anymore.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of this commit and the following is for
psa_key_id_t to always be as defined by the PSA
Cryptography API specification.
Currently psa_key_id_t departs from its specification
definition when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration flag is set. In that configuration, it is set
to be equal to psa_key_file_id_t which in that configuration
encodes an owner identifier along the key identifier.
Type psa_key_file_id_t was meant to be the key identifier type
used throughout the library code. If
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is set it
includes both a key and owner identifier, otherwise it is
equal to psa_key_id_t.
It has not been the key identifier type throughout the
library so far because when the PSA Cryptography
specification was developped the library Doxygen
documentation was used to generate the PSA Cryptography API
specification thus the need to use psa_key_id_t and not
psa_key_file_id_t.
As this constraint does not hold anymore, move
to psa_key_file_id_t as the key identifier type throughout
the library code.
By the way, this commit updates the key identifier
initialization in the tests to be compatible with a
composit key identifier. A psa_key_id_make()
inline function is introduced to initialize key
identifiers (composit ot not) at runtime.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
If test_fail is called multiple times in the same test case, report
the location of the first failure, not the last one.
With this change, you no longer need to take care in tests that use
auxiliary functions not to fail in the main function if the auxiliary
function has failed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Return a name that more clearly returns nonzero=true=good, 0=bad. We'd
normally expect check_xxx to return 0=pass, nonzero=fail so
check_parity was a bad name.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An early draft of the PSA crypto specification required multipart
operations to keep working after destroying the key. This is no longer
the case: instead, now, operations are guaranteed to fail. Mbed TLS
does not comply yet, and still allows the operation to keep going.
Stop testing Mbed TLS's non-compliant behavior.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rely on Asan to detect a potential buffer overflow, instead of doing a
manual check. This makes the code simpler and Asan can detect
underflows as well as overflows.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the cleanup code for persistent_key_load_key_from_storage(), we
only attempt to reopen the key so that it will be deleted if it exists
at that point. It's intentional that we do nothing if psa_open_key()
fails here.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If any of the TEST_ASSERT()s that are before the call to
mbedtls_pk_warp_as_opaque() failed, when reaching the exit label
psa_destroy_key() would be called with an uninitialized argument.
Found by Clang.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
