When the size of a buffer is 0, the corresponding pointer argument may
be null. In such cases, library functions must not perform arithmetic
on the pointer or call standard library functions such as memset and
memcpy, since that would be undefined behavior in C. Protect such
cases.
Refactor the storage of a 0-sized raw data object to make it store a
null pointer, rather than depending on the behavior of calloc(1,0).
The RSA module uses unsigned int for hash_length. The PSA Crypto API
uses size_t for hash_length. Cast hash_length to unsigned int when
passed to the hash module.
The GCM, CCM, RSA, and cipher modules inconsistently use int or unsigned
int for a count of bits. The PSA Crypto API uses size_t for counting
things. This causes issues on LLP64 systems where a size_t can hold more
than an unsigned int. Add casts for where key_bits and bits are passed to
mbedtls_* APIs.
Use size_t for block_size in psa_mac_abort() because
psa_get_hash_block_size() returns a size_t. This also helps to avoid
compiler warnings on LLP64 systems.
To avoid a possible loss of precision, and to be semantically correct,
use psa_key_slot_t (which is 16 bits) instead of size_t (which is 32 or
64 bits on common platforms) in mbedtls_psa_crypto_free().
Previously, the psa_set_key_lifetime() implementation did not match the
function declaration in psa/crypto.h. Value types don't need const,
since they are passed by value. Fix psa_set_key_lifetime()
implementation by making it match its declaration in the header.
This requires defining a maximum RSA key size, since the RSA key size
is the signature size. Enforce the maximum RSA key size when importing
or generating a key.
Fill the unused part of the output buffer with '!', for consistency
with hash and mac.
On error, set the output length to the output buffer size and fill the
output buffer with '!', again for consistency with hash and mac. This
way an invalid output is more visible in a memory dump.
Restructure the error paths so that there is a single place where the
unused part of the output buffer is filled.
Also remove a redundant initialization of *signature_length to 0.
Change the representation of an ECDSA signature from the ASN.1 DER
encoding used in TLS and X.509, to the concatenation of r and s
in big-endian order with a fixed size. A fixed size helps memory and
buffer management and this representation is generally easier to use
for anything that doesn't require the ASN.1 representation. This is
the same representation as PKCS#11 (Cryptoki) except that PKCS#11
allows r and s to be truncated (both to the same length), which
complicates the implementation and negates the advantage of a
fixed-size representation.
* Distinguish randomized ECDSA from deterministic ECDSA.
* Deterministic ECDSA needs to be parametrized by a hash.
* Randomized ECDSA only uses the hash for the initial hash step,
but add ECDSA(hash) algorithms anyway so that all the signature
algorithms encode the initial hashing step.
* Add brief documentation for the ECDSA signature mechanisms.
* Also define DSA signature mechanisms while I'm at it. There were
already key types for DSA.
* PSS needs to be parametrized by a hash.
* Don't use `_MGF1` in the names of macros for OAEP and PSS. No one
ever uses anything else.
* Add brief documentation for the RSA signature mechanisms.
Make psa_export_key() always set a valid data_length when exporting,
even when there are errors. This makes the API easier to use for buggy
programs (like our test code).
Our test code previously used exported_length uninitialized when
checking to see that the buffer returned was all zero in import_export()
in the case where an error was returned from psa_export_key().
Initialize exported_length to an invalid length, and check that it gets
set properly by psa_export_key(), to avoid this using export_length
uninitialized. Note that the mem_is_zero() check is still valid when
psa_export_key() returns an error, e.g. where exported_length is 0, as
we want to check that nothing was written to the buffer on error.
Out test code also previous passed NULL for the data_length parameter of
psa_export_key() when it expected a failure (in key_policy_fail()).
However, data_length is not allowed to be NULL, especially now that we
write to data_length from psa_export_key() even when there are errors.
Update the test code to not pass in a NULL data_length.
psa_hash_abort, psa_mac_abort and psa_cipher_abort now return
PSA_ERROR_BAD_STATE if operation->alg is obviously not valid, which
can only happen due to a programming error in the caller or in the
library. We can't detect all cases of calling abort on uninitialized
memory but this is dirt cheap and better than nothing.
It isn't used to define other macros and it doesn't seem that useful
for users. Remove it, we can reintroduce it if needed.
Define a similar function key_type_is_raw_bytes in the implementation
with a clear semantics: it's a key that's represented as a struct
raw_data.
Also add what was missing in the test suite to support block ciphers
with a block size that isn't 16.
Fix some buggy test data that passed only due to problems with DES
support in the product.
In psa_hash_start, psa_mac_start and psa_cipher_setup, return
PSA_ERROR_INVALID_ARGUMENT rather than PSA_ERROR_NOT_SUPPORTED when
the algorithm parameter is not the right category.
When psa_mac_start(), psa_encrypt_setup() or psa_cipher_setup()
failed, depending on when the failure happened, it was possible that
psa_mac_abort() or psa_cipher_abort() would crash because it would try
to call a free() function uninitialized data in the operation
structure. Refactor the functions so that they initialize the
operation structure before doing anything else.
Add non-regression tests and a few more positive and negative unit
tests for psa_mac_start() and psa_cipher_setup() (the latter via
psa_encrypt_setip()).
In psa_export_key, ensure that each byte of the output buffer either
contains its original value, is zero, or is part of the actual output.
Specifically, don't risk having partial output on error, and don't
leave extra data at the end of the buffer when exporting an asymmetric
key.
Test that exporting to a previously zeroed buffer leaves the buffer
zeroed outside the actual output if any.
Exporting an asymmetric key only worked if the target buffer had
exactly the right size, because psa_export_key uses
mbedtls_pk_write_key_der or mbedtls_pk_write_pubkey_der and these
functions write to the end of the buffer, which psa_export_key did not
correct for. Fix this by moving the data to the beginning of the
buffer if necessary.
Add non-regression tests.
psa_import_key must check that the imported key data matches the
expected key type. Implement the missing check for EC keys that the
curve is the expected one.
Avoid lines longer than 80 columns.
Remove some redundant parentheses, e.g. change
if( ( a == b ) && ( c == d ) )
to
if( a == b && c == d )
which makes lines less long and makes the remaining parentheses more
relevant.
Add missing parentheses around return statements.
There should be no semantic change in this commit.
Store the temporary key in the long-key case (where the key is first
hashed) directly into ipad. This reduces the stack usage a little, at
a slight cost in complexity.
In psa_mac_start, the hash of the key and ipad contain material that
can be used to make HMAC calculations with the key, therefore they
must be wiped.
In psa_mac_finish_internal, tmp contains an intermediate value which
could reveal the HMAC. This is definitely sensitive in the verify case,
and marginally sensitive in the finish case (it isn't if the hash
function is ideal, but it could make things worse if the hash function
is partially broken).
Split algorithm-specific code out of psa_mac_start. This makes the
function easier to read.
The behavior is mostly unchanged. In a few cases, errors before
setting a key trigger a context wipe where they didn't. This is a
marginal performance loss but only cases that are an error in caller
code.
Initial implementation for the AEAD APIs, missing the following:
* Concatenation of the tag to the output buffer.
* Updated documentation of the new functions.
* argument validations
* tests
Conflicts:
library/psa_crypto.c
tests/suites/test_suite_psa_crypto.data
tests/suites/test_suite_psa_crypto.function
All the conflicts are concurrent additions where the order doesn't
matter. I put the code from feature-psa (key policy) before the code
from PR #13 (key lifetime).
psa_get_key_lifetime() behavior changed regarding empty slots, now
it return the lifetime of and empty slots. Documentation in header
file updated accordingly.
Conflict resolution:
* `tests/suites/test_suite_psa_crypto.data`: in the new tests from PR #14,
rename `PSA_ALG_RSA_PKCS1V15_RAW` to `PSA_ALG_RSA_PKCS1V15_SIGN_RAW` as
was done in PR #15 in the other branch.
New header file crypto_struct.h. The main file crypto.sh declares
structures which are implementation-defined. These structures must be
defined in crypto_struct.h, which is included at the end so that the
structures can use types defined in crypto.h.
Implement psa_hash_start, psa_hash_update and psa_hash_final. This
should work for all hash algorithms supported by Mbed TLS, but has
only been smoke-tested for SHA-256, and only in the nominal case.
Don't use the pk module except as required for pkparse/pkwrite. The
PSA crypto layer is meant to work alongside pk, not on top of it.
Fix the compile-time dependencies on RSA/ECP handling in
psa_export_key, psa_destroy_key and psa_get_key_information.
Define psa_key_type_t and a first stab at a few values.
New functions psa_import_key, psa_export_key, psa_destroy_key,
psa_get_key_information. Implement them for raw data and RSA.
Under the hood, create an in-memory, fixed-size keystore with room
for MBEDTLS_PSA_KEY_SLOT_COUNT - 1 keys.
New module psa_crypto.c (MBEDTLS_PSA_CRYPTO_C):
Platform Security Architecture compatibility layer on top of
libmedcrypto.
Implement psa_crypto_init function which sets up a RNG.
Add a mbedtls_psa_crypto_free function which deinitializes the
library.
Define a first batch of error codes.
