A temporary hack: at the time of writing, not all dependency symbols
are implemented yet. Skip test cases for which the dependency symbols are
not available. Once all dependency symbols are available, this comit
should be reverted.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_KEY_TYPE_RAW_DATA and PSA_KEY_TYPE_DERIVE are always supported.
Make this explicit by declaring PSA_WANT_KEY_TYPE_RAW_DATA and
PSA_WANT_KEY_TYPE_DERIVE unconditionally. This makes it easier to
infer dependencies in a systematic way.
Don't generate not-supported test cases for those key types. They
would always be skipped, which is noise and would make it impossible
to eventually validate that all test cases pass in at least one
configuration over the whole CI.
Don't remove the exception in set_psa_test_dependencies.py for now, to
get less noise in dependencies. This may be revised later if it is
deemed more important to be systematic.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
ECC curve dependency symbols include the key size in addition to the
curve family. Tweak the dependencies once the key size is known.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This test data file is automatically generated. We could do that as
part of the build, since the only requirement is Python and we have a
requirement on Python to build tests anyway (to generate the .c file
from the .function file). However, committing the generating file into
the repository has less impact on build scripts, and will be necessary
for some of the files generated by generate_psa_tests.py (at least the
storage format stability tests, for which stability is guaranteed by
the fact that the generated file doesn't change). To keep things
simple, for now, let's commit all the files generated by
generate_psa_tests.py into the repository.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add support for ECC key types to the generation of not-supported test
cases in generate_psa_tests.py. For each curve, generate test cases
both for when ECC isn't supported and for when the curve isn't
supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For each declared key type, generate test cases for psa_import_key and
psa_generate_key when the corresponding type is not supported.
Some special cases:
* Public keys can never be generated.
* Omit key types that Mbed TLS does not support at all.
* ECC and FFDH, which depend on a curve/group, are not covered yet.
The generated test cases are written to
tests/suites/test_suite_psa_crypto_not_supported.generated.data .
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit creates a script to generate test cases automatically
based on enumerating PSA key types, algorithms and other
classifications of cryptographic mechanisms.
Subsequent commits will implement the generation of test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The point of having an external RNG is that you can disable all
built-in RNG functionality: both the entropy part and the DRBG part.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The SSL test programs can now use mbedtls_psa_get_random() rather than
entropy+DRBG as a random generator. This happens if
the configuration option MBEDTLS_USE_PSA_CRYPTO is enabled, or if
MBEDTLS_TEST_USE_PSA_CRYPTO_RNG is set at build time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Extend import/export/generate key through a PSA
transparent driver without software fallback
testing to RSA keys.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Whether MBEDTLS_USE_PSA_CRYPTO is enabled makes a significant
difference with respect to how random generators are used (and, for
no-HMAC_DRBG, how ECDSA signature is dispatched), so test both with
and without it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The compilation guards in key_management.c are now
accelerator compilation guards (MBEDTLS_PSA_ACCEL_KEY_TYPE_xyz).
As a consequence when running the PSA driver wrapper
tests as part of test_psa_crypto_config_basic
and test_psa_crypto_drivers all.sh components all
key management cryptographic operations were handled by
the software builtin fallback, and not by the test driver
as intended in the first place.
This commits fixes this issue by:
. declaring an accelerator for ECC key pairs in
test_psa_crypto_config_basic.
. declaring an accelerator for both ECC and RSA
key pairs in test_psa_crypto_drivers.
It is possible to declare an accelerator for both
ECC and RSA key pairs in test_psa_crypto_drivers
and not in test_psa_crypto_config_basic because
in the case of test_psa_crypto_drivers the new
PSA configuration is not activated. That way,
the builtin fallback software implementation
is present to supply the transparent test driver
when some support is missing in it (mainly
RSA key generation).
Note that the declaration of accelerators does
much more than just "fixing" the execution flow of
driver wrapper tests, it makes all import and public
key export cryptographic operations in all unit
tests being handled by the transparent test driver
(provided that it supports the key type).
One test case related to key generation is
partially disabled. This will be fixed with the
rework of psa_generate_key along the lines
described in psa-crypto-implementation-structure.md.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Storage format tests that only look at how the file is structured and
don't care about the format of the key material don't depend on any
cryptographic mechanisms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The negative test cases for psa_copy_key() don't actually care whether
the target policy is supported. This is similar to _key_policy tests.
Add a similar rule.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It isn't a set of dependencies, it's a set of symbols. So give it a
name that describes the symbol rather than a name that pretends it's a
collection of dependencies.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function asymmetric_signature_key_policy combines positive
and negative tests inside the code, so it doesn't take a status as its
last argument.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It doesn't make much difference in practice, but to keep closer to
what the current code does, run negative key policy tests even if the
algorithm for the operation attempt is not supported.
In particular, this allows the following test cases to run:
* "PSA key policy: agreement + KDF, wrong agreement algorithm"
* "PSA key policy: raw agreement, wrong algorithm"
Without this exception, those two test cases would never run, because
they would depend on PSA_ALG_WANT_FFDH. Since FFDH is not implemented
yet, it isn't enabled in any configuration. There's no alternative to
FFDH for these particular test cases because ECDH is the only key
agreement that is implemented in Mbed TLS so far.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_xxx_CATEGORY_yyy is used in metadata tests where it doesn't
involve any particular support, and elsewhere it's used as a value
that is definitely not supported but is in a plausible range. Such
symbols do not require any dependency.
If a test case is expects PSA_ERROR_NOT_SUPPORTED, its
dependencies (often including one negative dependency) cannot be
determined automatically, so leave that test case alone.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Some symbols don't require a dependency symbol:
* Modifiers such as truncated MAC
* Always-on features such as the raw data key type
* Aliases or special values such as RSA PKCS#1v1.5 raw
I'm not convinced that all of these warrant special handling in the
script, rather than having the expected symbol defined somewhere. But
for now I prefer to minimize changes to the header files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't remove cipher-related dependencies because the corresponding
PSA_WANT_xxx dependencies are not implemented yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove any existing PSA_WANT_xxx dependency. Add PSA_WANT_xxx
dependencies based on the PSA_KEY_TYPE_xxx and PSA_ALG_xxx symbols
used in the test case arguments.
PSA_ECC_FAMILY_xxx and PSA_DH_GROUP_xxx are not implemented yet in the
PSA conditional inclusion mechanism in Mbed TLS, so this script
doesn't handle them yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Parse the existing dependencies. For now, just write them back.
Subsequent commits will implement the dependency processing that is
the goal of this program.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit only contains a framework to rewrite .data files. No
actual modification of the content is implemented yet.
For now, command line parsing is trivial: just a list of file names,
with no options.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As indicated in the comments in the can_mypy function, we don't just
need a mypy executable to be present, we need it to work.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This reduces dependencies, doesn't require maintainers to know awk,
and makes the version parsing more robust.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that the script might additionally run mypy, it's more
user-friendly to indicate what's going on at the beginning as well.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In component_test_no_hmac_drbg, the fact that HMAC_DRBG is disabled
doesn't affect the SSL code, but the fact that deterministic ECDSA is
disabled does. So run some ECDSA-related SSL tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support HMAC_DRBG in ssl_client2 and ssl_server2, in addition to
CTR_DRBG. CTR_DRBG is still used if present, but it's now possible to
run the SSL test programs with CTR_DRBG disabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
With just the option --can-pylint or --can-mypy, check whether the
requisite tool is available with an acceptable version and exit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mypy automatically checks the modules when it encounters them as
imports. Don't make it check them twice, because it would complain
about encountering them through different paths (via the command line
as scripts/mbedtls_dev/*.py and via imports as just mbedtls_dev/*.py).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a directory mbedtls_dev intended to contain various Python
module for use by Python scripts located anywhere in the Mbed TLS
source tree.
Move get_c_expression_values and its auxiliary functions into a new
Python module mbedtls_dev.c_build_helper.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generalize the very ad hoc run_c function into a function to generate
a C program to print the value of a list of expressions. Refactor the
code into several functions to make it more manageable.
No intended behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Allow Python scripts in tests/scripts to import modules located in the
scripts directory. To do this, use
```
import scripts_path # pylint: disable=unused-import
```
Declare the scripts directory to pylint and to mypy.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since no typing stubs are available for mbed_host_tests.py, mypy
errors out on mbedtls_test.py with
error: Skipping analyzing 'mbed_host_tests': found module but no type hints or library stubs
Ignore this import to get at least some benefit from mypy without
spending significant effort to write stubs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
