In order to remove large buffers from the stack, the der data is written
into the same buffer that the pem is eventually written into, however
although the pem data is zero terminated, there is now data left in the
buffer after the zero termination, which can cause
mbedtls_x509_crt_parse to fail to parse the same buffer if passed back
in. Patches also applied to mbedtls_pk_write_pubkey_pem, and
mbedtls_pk_write_key_pem, which use similar methods of writing der data
to the same buffer, and tests modified to hopefully catch any future
regression on this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Make sure that if a buffer is allowed to be empty, a null pointer is
accepted if the buffer length is 0. This was already the case for most
but not all arguments to mbedtls_cipher_auth_{en,de}crypt{,_ext}.
Make sure to pass NULL for an empty buffer in the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run all the addition and subtraction tests with the result aliased to
the first operand and with the result aliased to the second operand.
Before, only some of the aliasing possibilities were tested, for only
some of the functions, with only some inputs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fixes an issue where configs that had `MBEDTLS_MPI_MAX_BITS` greater than 256
but smaller than the test that was running (792 bits) the test would fail
incorrectly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Move dependancy on `MBEDTLS_MPI_MAX_BITS` to apply to the specific test cases
which will break when `MBEDTLS_MPI_MAX_BITS` is too small. This re-enables
previous tests that were turned off accidentally.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Previously `mbedtls_mpi_exp_mod` was tested with values that were over
`MBEDTLS_MPI_MAX_SIZE` in size. This is useful to do as some paths are only
taken when the exponent is large enough however, on builds where
`MBEDTLS_MPI_MAX_SIZE` is under the size of these test values.
This fix turns off these tests when `MBEDTLS_MPI_MAX_SIZE` is too small to
safely test (notably this is the case in config-thread.h).
Signed-off-by: Chris Jones <christopher.jones@arm.com>
In two test cases, the exponentiation computation was not being fully tested
as when A_bytes (the base) == N_bytes (the modulus) -> A = N. When this is the
case A is reduced to 0 and therefore the result of the computation will always
be 0.
This fixes that issue and therefore increases the test coverage to ensure
different computations are actually being run.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reword test cases to be easier to read and understand.
Adds comments to better explain what the test is doing.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
This temporarily breaks all.sh '*deprecated*' (deprecated functions still used
in the library), which will be fix in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We want to test both sets of functions (ext and non-ext) in turn, so goto exit
is not really and option.
Also, separate setting up the context (which is going to be the same for both
ext and non-ext functions) from setting up the buffers (which will vary).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add two further boundary tests for cases where both the exponent and modulus to
`mbedtls_mpi_exp_mod()` are `MBEDTLS_MPI_MAX_SIZE`, or longer, bytes long.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
* development: (488 commits)
Fix removal of deprecated PSA constants
Use GitHub-compatible table formatting
Remove psa header files in uninstall part
Change function casting in `ssl_calc_finished_tls_sha384`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Add changelog entry file to `ChangeLog.d`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Fix GCC warning about `test_snprintf`
Fix mismatched function parameters (prototype/definition)
Fix build failure on gcc-11
Copyediting
Clarifications around key import
Fix copypasta
A variable is unused in some configurations
Rename test_driver_keygen to test_driver_key_management
Move "internal use" sentence attached to the wrong function
Added changelog
Plug in the entry point for public key export through driver
tests: psa: Reset key attributes where needed
Improve/fix documentation
...
Adds test cases to ensure that `mbedtls_mpi_exp_mod` will return an error with
an exponent or modulus that is greater than `MBEDTLS_MPI_MAX_SIZE` in size.
Adds test cases to ensure that Diffie-Hellman will fail to make a key pair
(using `mbedtls_dhm_make_public`) when the prime modulus is greater than
`MBEDTLS_MPI_MAX_SIZE` in size.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a test case to ensure `mbedtls_mpi_exp_mod` fails when using a key size
larger than MBEDTLS_MPI_MAX_SIZE.
Add a test case to ensure that Diffie-Hellman operations fail when using a key
size larger than MBEDTLS_MPI_MAX_SIZE.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
New tests have been added for all the hash algorithms to
confirm they compile correctly when using PSA_WANT and
accelerator guards.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Add missing tag check for algorithm parameters when comparing the
signature in the description part of the cert against the actual
signature whilst loading a certificate. This was found by a
certificate (created by fuzzing) that openssl would not verify, but
mbedtls would.
Regression test added (one of the client certs modified accordingly)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ctr_drbg_set_reseed_interval() and
mbedtls_hmac_drbg_set_reseed_interval() can now be called before
their seed functions and the reseed_interval value will persist.
Previously it would be overwritten with the default value.
*_drbg_reseed_interval is now set in init() and free().
mbedtls_ctr_drbg_free() and mbedtls_hmac_drbg_free() now
reset the drbg context to the state immediately after init().
Tests:
- Added test to check that DRBG reseeds when reseed_counter
reaches reseed_interval, if reseed_interval set before seed
and reseed_interval is less than MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
Signed-off-by: gacquroff <gavina352@gmail.com>
Positive tests: test that the RNG has the expected size, given that we
know how many leading zeros it has because we know how the function
consumes bytes and when the test RNG produces null bytes.
Negative tests: test that if the RNG is willing to emit less than the
number of wanted bytes, the function fails.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
GCC 11 generated the warnings because the parameter `ret_buf`
was declared as `const char[10]`, but some of the arguments
provided in `run_test_snprintf` are shorter literals, like "".
Now the type of `ret_buf` is `const char *`.
Both implementations of `test_snprintf` were fixed.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
Add two builds with MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG to all.sh:
* full minus all DRBG (validates that PSA can work without any of the
DRBG modules).
* with MBEDTLS_USE_PSA_CRYPTO and no CTR_DRBG (validates that PSA can
work without CTR_DRBG, and that it works for USE_PSA_CRYPTO).
The goal is to exercise default/full, with/out USE_PSA_CRYPTO, and
with/out deterministic ECDSA (which requires HMAC_DRBG). The choice of
pairing is rather arbitrary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support using HMAC_DRBG instead of CTR_DRBG in the PSA subsystem.
Use HMAC_DRBG if CTR_DRBG is available. Choose between SHA-256 and
SHA-512 based on availability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Implement support for MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG.
For test purposes, write an implementation that uses libc rand().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
After a call to psa_get_key_attributes() to retrieve
the attributes of a key into a psa_key_attributes_t
structure, a call to psa_reset_key_attributes() is
mandated to free the resources that may be
referenced by the psa_key_attributes_t structure.
Not calling psa_reset_key_attributes() may result in
a memory leak.
When a test function calls psa_get_key_parameters()
the associated key attributes are systematically
reset in the clean-up part of the function with a
comment to emphasize the need for the reset and make
it more visible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename functions to get a key slot:
. to make their naming more consistent
. to emphasize that those functions set a lock on the
key slot they return to protect it from being wiped
out and re-used while some part of the library
is accessing it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Moved new check_crypto_config.h file from include/psa to library
directory and the file is now included from *.c instead of the
crypto_config.h file. Fixed guards in PSA crypto library based
on review comments for new PSA crypto config features.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Revised the placement of various new MBEDTLS_PSA_BUILTIN_xxx
guards based on review comments. Corrected guards in psa
test driver to use _ACCEL version instead of _BUILTIN version.
Updated check_config_psa.h to include additional dependency checks
for more algorithms. Renamed some of the new tests to be a little
more clear on the purpose.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
For consistency across the code base, prefer
persistent over permanent to qualify a key
stored in persistent storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When looking for an empty key slot to store
the description of a key, if all key slots
are in use, reuse the first encountered
and unaccessed key slot containing the
description of a permanent key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add a counter of unaccessed slots and use it
in tests to check that at the end of PSA tests
all key slot are unaccessed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The identifier of keys created/registred should be in
the application range.
This is by spec for key creation.
This may change for registered key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When key identifiers encode key owner, add tests
checking that:
. the key owner of an imported volatile key is
the one specified.
. a key identifier of a volatile key with a valid
PSA key identifier but the wrong owner is
rejected.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For persistent keys there were two successive
INVALIDATE_BY_(CLOSING/DESTROYING) identical tests
where the comments of the second test rather
indicated that it should had been an
INVALIDATE_BY_(CLOSING/DESTROYING)_WITH_SHUTDOWN test.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ways of invalidating keys before introducing
key purging tests because the "CLOSE_BY" prefix doesn't
get on well with the purge operation.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Code under MBEDTLS_USE_PSA_CRYPTO define is PSA client
code intended to use key identifiers of type psa_key_id_t.
Thus the MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
configuration option is incompatible with
MBEDTLS_USE_PSA_CRYPTO.
State this in config.h and check_config.h.
As a consequence:
. remove MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER from
the full configuration, as MBEDTLS_USE_PSA_CRYPTO is
part of it.
. add a new component in all.sh to keep testing the
library when MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
is set.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As handles are now key identifiers, a handle may be
valid now even if it does not refer to any key
known to the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Updated macros in config_psa.h that used ECC_xxx to use KEY_TYPE_ECC_xxx
per comments from review. Implemented a check_config_psa.h to help with
dependency checking of features enabled in config_psa.h. Added
check_config_psa.h to visual studio project.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In order to pass existing tests like test_psa_crypto_config_basic
and test_psa_crypto_config_no_driver, all the new features need
to be enabled in the default crypto_config.h file. This change
enables those features by default and updates the other new
tests to compensate for everything being enabled by disabling
some features for some of the tests as needed.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Updated some of the test names to better reflect what they are testing.
Expanded the testing around RSA feature for PSA crypto config. Updated
the test script to support backing up and restoring the
include/psa/crypto_config.h file so that features can be individually
setup for each unique feature test.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In the original attempt to add RSA support to PSA crypto config was too
generic. This set of changes adds support for the following RSA features:
PSA_WANT_ALG_RSA_PKCS1V15_CRYPT, PSA_WANT_ALG_RSA_PKCS1V15_SIGN,
PSA_WANT_ALG_RSA_OAEP, PSA_WANT_ALG_RSA_PSS, PSA_WANT_KEY_TYPE_RSA_KEY_PAIR,
and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY.
There were also some updates to ensure the proper inclusion of PSA crypto
library code when certain features are enabled. These updates were made to
address warnings and errors in builds from the new tests for these
features being added for PSA crypto configuration.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The KEY_TYPE_ECC_KEY_PAIR and KEY_TYPE_ECC_PUBLIC_KEY were previously
being guarded by MBEDTLS_ECP_C in the PSA crypto library code. This change
moves it to the new MBEDTLS_PSA_BUILTIN_xxx and separates KEY_PAIR
and PUBLIC_KEY as needed. Tests have also been added to validate the new
settings.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
This phase adds in support for the following features being
added to the list of features that can be configured in the
include/psa/crypto_config.h header file using the PSA_WANT_ALG_xxx
macros: ECDH, HMAC, HKDF, and RSA. These changes include changes to
the PSA crypto library to use the appropriate new guards that
will allow the feature to be compiled in or out either using
new PSA_WANT_ALG_xxx or the previous MBEDTLS_xxx macros.
For HKDF and HMAC, most of the PSA library code did not have a
specific matching MBEDTLS_xxx macro for that feature, but was instead
using the generic dependent MBEDTLS_MD_C macro. The ECDH and RSA
features more closely aligned with a direct replacement with a similar
macro.
The new tests for RSA, HMAC, and HKDF would normally unset additional
dependent macros, but when attempting to implement that level of
testing it required removal of too many core features like MD_C, PK_C,
ECP_C and other low level features. This may point to additional phases of
work to complete the transition of these features to the new model.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Add a build with MBEDTLS_ERROR_STRERROR_DUMMY but not MBEDTLS_ERROR_C.
Previously, both options were enabled by default, but
MBEDTLS_ERROR_STRERROR_DUMMY only matters when MBEDTLS_ERROR_C is
enabled, so its effect was not tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Two sample configuration file were not being tested:
config-no-entropy.h and config-psa-crypto.h. Add them.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* zero key buffer on failure
* readability improvements
* psa_finish_key_creation adjustment after removing import_key_into_slot
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Force using IPv4 in the GNU_CLI SRTP tests, as introduced for
other tests in #1918.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Since `gnutls-cli` resolves `localhost` as an IPv6 address, and the server
is bound to IPv4 address, gnutl-cli fails to negotiate DTLS sessions.
Force the server to bind to IPv6 address, as a workaround.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Add DTLS-SRTP tests in `ssl-opts.sh`
2. Add logs for the tests to filter.
3. Add function to get the profile informations.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Removed comment referencing test driver header path and the inclusion of
the test driver directory from the build since it is not required
for that test.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Changed the test name from test_ to build_ to better reflect
what the test is currently performing.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Added a new test to all.sh to confirm that using MBEDTLS_PSA_CRYPTO_CONFIG
with no test driver and the library is configured with normal configurations
that the test works.
Minor updates to other PSA crypto tests to cleanup msg output for consistency.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Updated the test_psa_want_ecdsa_disabled_software to enable and disable
the correct macros to accomplish the desired test. The previous version
left out the disabling of additional macros to ensure items related
to MBEDTLS_ECDSA_C were also unset. The test was also missing the setting
of the accelerators MBEDTLS_PSA_ACCEL_ALG_ECDSA and DETERMINISTIC_ECDSA.
With the accelerators enabled the test portion had to be temporarily
disabled until the accelerator code is completed so the test will work
properly.
Updated the signature driver source to fix a compiler warning when
MBEDTLS_ECDSA_C is unset.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Add context-info.sh to the test scripts linked into the cmake build
directory, so that these tests are available as well.
Signed-off-by: David Brown <david.brown@linaro.org>
Add a non-regression test for ssl_context_info to ensure the base64
decoder doesn't stop processing when it encounters a 0xFF character.
Signed-off-by: David Brown <david.brown@linaro.org>
Allows required targets to have prefixes added to them, so that external
projects can avoid target names clashing.
Signed-off-by: Raef Coles <raef.coles@arm.com>
The calculation of the expected key size when not using the test_size_function
was not correct. The function has now been updated to handle all cases
properly to ensure the expected key size is correct for key pairs, public
keys, and symmetric keys.
Cleaned up some comments and removed unused includes.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Replaced generic values for the test driver with specific
ones for a 256-bit ECC private/public key pair.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Updated get_expected_key_size in psa_crypto_driver_wrappers to properly
handle using the new size_function from PSA crypto drivers. Created
initial infrastructure to support size_function for the PSA crypto
drivers.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The psa crypto library was generically using PSA_WANT_ALG_xxx, but
should have been using the correct MBEDTLS_PSA_BUILTIN_ALG_xxx
definition since that code is the builtin version. There were also
a couple of spots that needed to ensure the code block was enabled
for either ECDSA or DETERMINISTIC_ECDSA, not just one of them.
Fixed all the new ALG_ECDSA_DETERMINISTIC names to be
ALG_DETERMINISTIC_ECDSA instead.
Fixed test to use correct definitions.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The ccm tests were previously relying on unspecified behaviour in
the underlying implementation (i.e. that it rejects certain buffer
sizes without reading the buffer).
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Need to make sure the new MBEDTLS_PSA_ACCEL_XXX defines are not checked
since they should be defined by the PSA driver. Updated the list-macros.sh
script to modify the instances of those found to match the corresponding
MBEDTLS_PSA_BUILTIN_XXX that are defined in config_psa.h
Fixed definition of MBEDTLS_PSA_BUILTIN_ALG_ECDSA_DETERMINISTIC, name was
incorrect. Also fixed a missing space in the comments of crypto_config.h
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Provided a clearer comment for the description for ignoring
MBEDTLS_PSA_CRYPTO_CONFIG for full build setting.
Updated message output for test_psa_crypto_config_basic and
test_psa_want_ecdsa_disabled_software so it is more clear and
concise in what the test is doing. Removed inclusion of the
MBEDTLS_PSA_ACCEL_ALG_ECDSA since it should not have been used
for that particular tests.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The CCM specification (NIST SP 800-38C) mandates that the formatting of
the additional data length l(a) changes when it is greater _or equal_ to
2^16 - 2^8 (>= 0xFF00). Since such lengths are not supported in mbed TLS,
the operation should fail in such cases.
This commit fixes an off-by-one error which allowed encryption/decryption
to be executed when l(a) was equal to 0xFF00, resulting in an
incorrect/non-standard length format being used.
Fixes#3719.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Stores bits in psa_persistent_key_storage_format.
* psa_load_persistent_key_into_slot still imports plaintext keys which
ensures that the bits value gets set.
* Updates key specification to match new implementation.
* Expands persistent store and load tests with to check for bits
attribute.
* Removes bits storage from psa_se_key_data_storage_t.
Signed-off-by: Torstein Nesse <torstein.nesse@silabs.com>
With the introduction of new tests for PSA crypto config features
the test needs to now be able to set and unset values from the
psa/crypto_config.h file. This change updates from passing the defines
as a build arguement to modifying the header files using config.py.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
* #3742 After input of a key as SECRET in the derivation, allow the
derivation result to be used as key.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* #3741 Allow key agreement inside derivation with a key that's allowed
for the relevant agreement.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Test import and key generation, each followed by a key agreement. Only
good cases in this commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
... as opposed to PSA_ERROR_BAD_STATE.
The spec on psa_cipher_finish() states that PSA_ERROR_INVALID_ARGUMENT
should be returned when:
"The total input size passed to this operation is not valid for this
particular algorithm. For example, the algorithm is a based on block
cipher and requires a whole number of blocks, but the total input size
is not a multiple of the block size."
Currently, there is a distinction between encryption and decryption
on whether INVALID_ARGUMENT or BAD_STATE is returned, but this is not
a part of the spec.
This fix ensures that PSA_ERROR_INVALID_ARGUMENT is returned
consistently on invalid cipher input sizes.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
In a case exprssion, `|` separates patterns so it needs to be quoted.
Also `\` was not actually part of the set since it was quoting another
character.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Python should not be required for the build when the no_test target is
used. This commit adds the generated file to the source tree and the
check-generated-files script, and removes the generation from (c)make.
Fixes#3524
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
The toplevel directory is actually just ../..: the makefile commands
are executed in the subdirectory. $(PWD) earlier was wrong because it
comes from the shell, not from make. Looking up $(MAKEFILE_LIST) is
wrong because it indicates where the makefile is (make -f), not which
directory to work in (make -C).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Initial changes to PSA crypto core to support configuration
of ECDSA algorithm using PSA crypto configuration mechanism.
Guards using MBEDTLS_ECDSA_C and MBEDTLS_ECDSA_DETERMINISTIC have
been changed to be based off PSA_WANT_ALG_ECDSA and
PSA_WANT_ALG_ECDSA_DETERMINISTIC. Added new tests to all.sh to
confirm new settings are working properly. Current code does not
pass the tests since built in signature verification is not in place.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
* Reworked the cipher context once again to be more robustly defined
* Removed redundant memset
* Unified behaviour on failure between driver and software in cipher_finish
* Cipher test driver setup function now also returns early when its status
is overridden, like the other test driver functions
* Removed redundant test cases
* Added bad-order checking to verify the driver doesn't get called where
the spec says it won't.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Once an operation has been 'accepted' by a driver, the remainder is bound
to the same driver, since driver-specific context structs cannot be shared.
This provides a pretty good gate mechanism for the fallback logic, too.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
ssl_tls1_3_keys.c exports a structure containing all labels used
in the TLS 1.3 key schedule, but the TLS 1.3 key scheduling unit
tests so far replicated those labels in the test file. In particular,
wrong label values in ssl_tls1_3_keys.c wouldn't have been caught
by the unit tests.
This commit modifies the TLS 1.3 key schedule unit tests to use
the TLS 1.3 labels as exported by ssl_tls1_3_keys.c. This not only
makes sure that those labels are correct, but also avoids hardcoding
their hex-encoding in the test file.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Moved the new component_test_depends_pkalgs_psa to after the
component_test_depends_pkalgs test to be more consistent.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The pk_ec_test_vec() was incorrectly using MBEDTLS_MD_SHA1 for the
parameter to mbedtls_pk_verify(). It should use MBEDTLS_MD_NONE since
that parameter is ignored for this test case.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Needed to make additional fixes so that when MBEDTLS_USE_PSA_CRYPTO
is defined, the depends-hashes test will succeed. There are two
versions of the ecdsa_verify_wrap() function, one with
MBEDTLS_USE_PSA_CRYPTO and when when it is not enabled. The non PSA
version is not using the md_alg parameter since it is not required.
The PSA version was using that parameter to derive a different value
it needed for PSA_ALG_ECDSA. The arguement of PSA_ALG_ECDSA is
ignored for psa_sign_hash and psa_verify_hash. It is present because
it is used and must be a valid hash, not zero, for psa_sign_hash
(but not psa_verify_hash) with PSA_ALG_DETERMINISTIC_ECDSA, and it is
needed for psa_sign_message and psa_verify_message which are not
implemented yet. The local parameter now uses PSA_ALG_ECDSA_ANY for
the verify function to avoid using the md_alg parameter and avoids
returning incorrect error codes.
Fixes#3587
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The relevant test functions are already marked as depending on
`MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL`, so there's no need
to re-state this dependency for each test case.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
* Moved test data to .data file
* Bundled test driver hook variables in a struct
* Style fixes
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Trying to compile in the PSA accelerator test driver under MBEDTLS_TEST_HOOKS
turned out to be awkward regarding existing builds. We'll put it under a
custom (not in config.h) define instead, since it's something that only
should happen in test.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Also adjusted the different makefiles accordingly.
Note: driver lifetime is currently statically defined in the header, but
this will be replaced in the future based on autogeneration of lifetime
values by a script (TBD)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The test function mbedtls_mpi_lt_mpi_ct did not initialize ret in test
code. If there was a bug in library code whereby the library function
mbedtls_mpi_lt_mpi_ct() did not set ret when it should, we might have
missed it if ret happened to contain the expected value. So initialize
ret to a value that we never expect.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To test the proper handling of owner identifier as of key
identifiers, add owner identifier(s) to tests having
key identifier(s) as test parameters. Just don't do it for
tests related to tests invalid values of key identifiers
as there is no owner identifier invalid values.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Delete key files based on declaration by test cases and
not based on a hardcoded list of identifiers as in
test_suite_psa_crypto_slot_management.function. This fixes
the fact that in case of error the file associated to the
key identifier PSA_KEY_ID_VENDOR_MAX was not purged
(register_key_smoke_test test function).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove systematic deletion of key file associated to key
identifier 0 as this file is not created under the hood
anymore by the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix PSA code and unit tests for the unit tests
to pass with key identifiers encoding owner
identifiers.
The changes in PSA code just make the enablement
of key identifiers encoding owner identifiers
platform independent. Previous to this commit,
such key identifiers were used only in the case
of PSA SPM platforms.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define always psa_key_id_t as defined in the PSA
Cryptography API specification independently of
whether the MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration file is set or not.
As a consequence, get rid of `psa_app_key_id_t` that is
not needed anymore.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of this commit and the following is for
psa_key_id_t to always be as defined by the PSA
Cryptography API specification.
Currently psa_key_id_t departs from its specification
definition when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration flag is set. In that configuration, it is set
to be equal to psa_key_file_id_t which in that configuration
encodes an owner identifier along the key identifier.
Type psa_key_file_id_t was meant to be the key identifier type
used throughout the library code. If
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is set it
includes both a key and owner identifier, otherwise it is
equal to psa_key_id_t.
It has not been the key identifier type throughout the
library so far because when the PSA Cryptography
specification was developped the library Doxygen
documentation was used to generate the PSA Cryptography API
specification thus the need to use psa_key_id_t and not
psa_key_file_id_t.
As this constraint does not hold anymore, move
to psa_key_file_id_t as the key identifier type throughout
the library code.
By the way, this commit updates the key identifier
initialization in the tests to be compatible with a
composit key identifier. A psa_key_id_make()
inline function is introduced to initialize key
identifiers (composit ot not) at runtime.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
GCC up to 4.x defaults to C89. On our CI, we run the arm-none-eabi-gcc
version from Ubuntu 16.04 on Travis, and that's 4.9, so the gcc-arm
builds started failing on Travis when we introduced a C99 construct in
the configurations that we test on arm on Travis. Other builds, and
Jenkins CI, are not affected because they use GCC 5.x or newer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If test_fail is called multiple times in the same test case, report
the location of the first failure, not the last one.
With this change, you no longer need to take care in tests that use
auxiliary functions not to fail in the main function if the auxiliary
function has failed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If `$FILTER` (`-f`) and `$EXCLUDE` (`-e`) are simple selections that
can be expressed as shell patterns, use a case statement instead of
calling grep to determine whether a test case should be executed.
Using a case statement significantly reduces the time it takes to
determine that a test case is excluded (but the improvement is small
compared to running the test).
This noticeably speeds up running a single test or a small number of
tests. Before:
```
tests/ssl-opt.sh -f Default 1.75s user 0.54s system 79% cpu 2.885 total
```
After:
```
tests/ssl-opt.sh -f Default 0.37s user 0.14s system 29% cpu 1.715 total
```
There is no perceptible difference when running a large number of tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Avoid using the external command grep for simple string-based checks.
Prefer a case statement. This improves performance.
The performance improvement is moderate but noticeable when skipping
most tests. When a test is run, the cost of the associated grep calls
is negligible. In this commit, I focused on the uses of grep that can
be easily replaced and that are executed a large number of times.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix `printf "$foo"` which treats the value of `foo` as a printf format
rather than a string.
I used the following command to find potentially problematic lines:
```
git ls-files '*.sh' | xargs egrep 'printf +("?[^"]*|[^ ]*)\$'
```
The remaining ones are false positives for this regexp.
The errors only had minor consequences: the output of `ssl-opt.sh`
contained lines like
```
Renegotiation: gnutls server strict, client-initiated .................. ./tests/ssl-opt.sh: 741: printf: %S: invalid directive
PASS
```
and in case of failure the GnuTLS command containing a substring like
`--priority=NORMAL:%SAFE_RENEGOTIATION` was not included in the log
file. With the current tests, there was no risk of a test failure
going undetected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Showing a regexp to say that by default all tests are executed is not
particularly helpful.
If we ever add a default exclusion list or a default filter, we can
edit the documentation again.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Return a name that more clearly returns nonzero=true=good, 0=bad. We'd
normally expect check_xxx to return 0=pass, nonzero=fail so
check_parity was a bad name.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An early draft of the PSA crypto specification required multipart
operations to keep working after destroying the key. This is no longer
the case: instead, now, operations are guaranteed to fail. Mbed TLS
does not comply yet, and still allows the operation to keep going.
Stop testing Mbed TLS's non-compliant behavior.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rely on Asan to detect a potential buffer overflow, instead of doing a
manual check. This makes the code simpler and Asan can detect
underflows as well as overflows.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the cleanup code for persistent_key_load_key_from_storage(), we
only attempt to reopen the key so that it will be deleted if it exists
at that point. It's intentional that we do nothing if psa_open_key()
fails here.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If any of the TEST_ASSERT()s that are before the call to
mbedtls_pk_warp_as_opaque() failed, when reaching the exit label
psa_destroy_key() would be called with an uninitialized argument.
Found by Clang.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add new test (test_depends_curves_psa) to all.sh to confirm
that test is passing when MBEDTLS_USE_PSA_CRYPTO is defined.
Fix#3294
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Add guards in pk_wrap.c to ensure if ECDSA is not defined, errors
are returned.
Remove warnings in pk.c for unused variables.
Add new test (test_depends_pkalgs_psa) to all.sh to confirm
when USE_PSA_CRYPTO is defined that features are working properly.
Fix#3294
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
It wasn't working when invoking programs/x509/cert_write or
programs/x509/cert_req due to relying on the current directory rather
than the location of the makefile.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace server2.crt with server2-sha256.crt which, as the name implies, is
just the SHA-256 version of the same certificate.
Replace server1.crt with cert_sha256.crt which, as the name doesn't imply, is
associated with the same key and just have a slightly different Subject Name,
which doesn't matter in this instance.
The other certificates used in this script (server5.crt and server6.crt) are
already signed with SHA-256.
This change is motivated by the fact that recent versions of GnuTLS (or older
versions with the Debian patches) reject SHA-1 in certificates by default, as
they should. There are options to still accept it (%VERIFY_ALLOW_BROKEN and
%VERIFY_ALLOW_SIGN_WITH_SHA1) but:
- they're not available in all versions that reject SHA-1-signed certs;
- moving to SHA-2 just seems cleaner anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Recent GnuTLS packages on Ubuntu 16.04 have them disabled.
From /usr/share/doc/libgnutls30/changelog.Debian.gz:
gnutls28 (3.4.10-4ubuntu1.5) xenial-security; urgency=medium
* SECURITY UPDATE: Lucky-13 issues
[...]
- debian/patches/CVE-2018-1084x-4.patch: hmac-sha384 and sha256
ciphersuites were removed from defaults in lib/gnutls_priority.c,
tests/priorities.c.
Since we do want to test the ciphersuites, explicitly re-enable them in the
server's priority string. (This is a no-op with versions of GnuTLS where those
are already enabled by default.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Update copyright notices to newly added files since merge of original
PR #3546 "Update copyright notices to use Linux Foundation guidance".
Generated using the same script.
Signed-off-by: Dan Handley <dan.handley@arm.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
Currently the new component in all.sh fails because
mbedtls_ssl_cf_memcpy_offset() is not actually constant flow - this is on
purpose to be able to verify that the new test works.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The documentation of mbedtls_pk_wrap_as_opaque is quite clear:
* \param handle Output: a PSA key handle.
* It's the caller's responsibility to call
* psa_destroy_key() on that handle after calling
* mbedtls_pk_free() on the PK context.
But the test failed to call psa_destroy_key().
While at it, also use PSA_DONE(): it ensures that if we fail to destroy the
key, we'll get an explicit error message about it without the need for
valgrind.
This is a preliminary to adding a valgrind-based test for constant-flow code:
we need to make sure the rest of the tests are fully valgrind-clean, which
they weren't.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The tests are supposed to be failing now (in all.sh component
test_memsan_constant_flow), but they don't as apparently MemSan doesn't
complain when the src argument of memcpy() is uninitialized, see
https://github.com/google/sanitizers/issues/1296
The next commit will add an option to test constant flow with valgrind, which
will hopefully correctly flag the current non-constant-flow implementation.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
RFC5280 does not state that the `revocationDate` should be checked.
In addition, when no time source is available (i.e., when MBEDTLS_HAVE_TIME_DATE is not defined), `mbedtls_x509_time_is_past` always returns 0. This results in the CRL not being checked at all.
https://tools.ietf.org/html/rfc5280
Signed-off-by: Raoul Strackx <raoul.strackx@fortanix.com>
Three tests were guarded by `MBEDTLS_KEY_EXCHANGE_ECJPAKE`,
not `MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED`, as it should be.
Curiously, the guard still functioned as intended, perhaps
because `MBEDTLS_KEY_EXCHANGE_ECJPAKE` is a prefix of
`MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED`.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The debug output for supported ciphersuites has been changed
from `deadbeef` to `0xdeadbeef` in a previous commit, but the
test script `ssl-opt.sh` grepping for lines in the debug log
to determine test success/failure hadn't been adjusted accordingly.
This commit fixes this.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
* development: (55 commits)
Log change as bugfix
Add changelog entry
Clarify updates to the persistent state in storage
With multiple applicable transparent drivers, the order is unspecified
Minor clarifications
Give some examples of purpsoses of pure-software transparent driver
Fix typos
Add a link to the PSA API specification
Explain locations vs lifetimes
Initialize key pointer in ecdh to NULL
Add buffer zeroization when ecp_write_key fails
Simplified key slot deletion
Style fixes
Use arc4random_buf instead of rand on NetBSD
Apply review feedback
Update open question section about public key storage
Remove the paragraph about declaring application needs
Change driver persistent data to a callback interface
Rework and expand key management in opaque drivers
Fix typos and copypasta
...
Since it is being dereferenced by free on exit it should be inited to NULL.
Also added a small test that would trigger the issue.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
PSA Crypto was checking the byte length of a to-be-imported public ECP key
against the expected length for Weierstrass keys, forgetting that
Curve25519/Curve448 exists.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The usage of "!memcmp()" is at least not recommended
and better to use the macro dedicated for buffer
comparisons.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For explicit proxy commands (included with `-p "$P_PXY <args>` in the test
case), it's the test's writer responsibility to handle IPv6; only fix the
proxy command when we're auto-adding it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The convention from the TLS RFC is a bit unusual, so even if the test
function's introductory comment mentions that we're taking the RFC's
definition, it doesn't hurt to repeat it in crucial places.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Passing a length of 0 to it is perfectly acceptable, the macro was designed to
handle it correctly.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We only have a single integer available for two nested loops, but the loop
sizes are small enough compared to the integer's range that we can encode both
indexes. Since the integer is displayed in decimal in case of errors, use a
power of 10 to pack the two indexes together.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently this breaks all.sh component test_memsan_constant_flow, just as
expected, as the current implementation is not constant flow.
This will be fixed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
tests/scripts/curves.pl tests the library with a single curve enabled.
This uses the legacy ECDH context and the default ECDH implementation.
For Curve25519, there is an alternative implementation, which is
Everest. Test this. This also tests the new ECDH context, which
Everest requires.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Previously curves.pl tested with all elliptic curves enabled except
one, for each curve. This catches tests that are missing dependencies
on one of the curve that they use, but does not catch misplaced
conditional directives around parts of the library.
Now, we additionally test with a single curve, for each curve. This
catches missing or extraneous guards around code that is specific to
one particular curve or to a class of curves.
Signed-off-by: Gilles Peskine <gilles.peskine@arm.com>
Everything works at the byte level, not bit level. Flipping the lsb is just
one convenient way to corrupt a byte, but don't really care about individual
bits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add a few more negative test cases for mbedtls_x509_crl_parse.
The test data is manually adapted from the existing positive test case
"X509 CRL ASN1 (TBSCertList, sig present)" which decomposes as
305c
3047 tbsCertList TBSCertList
020100 version INTEGER OPTIONAL
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
300f issuer Name
310d300b0603550403130441424344
170c303930313031303030303030 thisUpdate Time
3014 revokedCertificates
3012 entry 1
8202abcd userCertificate CertificateSerialNumber
170c303831323331323335393539 revocationDate Time
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
03020001 signatureValue BIT STRING
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This option allows to test the constant-flow nature of selected code, using
MemSan and the fundamental observation behind ctgrind that the set of
operations allowed on undefined memory by dynamic analysers is the same as the
set of operations allowed on secret data to avoid leaking it to a local
attacker via side channels, namely, any operation except branching and
dereferencing.
(This isn't the full story, as on some CPUs some instructions have variable
execution depending on the inputs, most notably division and on some cores
multiplication. However, testing that no branch or memory access depends on
secret data is already a good start.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The test function now depends on MBEDTLS_TEST_HOOKS, which is enabled by
config.py full, and since there are already components in all.sh exercising
the full config, this test function is sill exercised even with this new
dependency.
Since this is the first time a test function depends on MBEDTLS_TEST_HOOKS,
fix a bug in check-names.sh that wasn't apparent so far: headers from
library/*.h were not considered when looking for macro definitions. This
became apparent because MBEDTLS_STATIC_TESTABLE is defined in library/common.h
and started being used in library/ssl_msg.c, so was flagged as a likely typo.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The dummy implementation is not constant-flow at all for now, it's just
here as a starting point and a support for developing the tests and putting
the infrastructure in place.
Depending on the implementation strategy, there might be various corner cases
depending on where the lengths fall relative to block boundaries. So it seems
safer to just test all possible lengths in a given range than to use only a
few randomly-chosen values.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The ssl_tranform structure lacks some members accessed by this function when
CBC is not enabled.
This was found by test-ref-configs.pl and all.sh
test_when_no_ciphersuites_have_mac, so no need to add a new test.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Started as copies of the AES block, then:
- for ARIA, just s/AES/ARIA/
- for Camellia, just s/AES/Camellia/
- for 3DES, s/AES/3DES/ then s/3DES_128_CBC/DES_EDE3_CBC/ then manually
subtract 8 to all plaintext lengths that were > 8. This accounts for the
fact that the block size of DES is 8 not 16.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
All started from a copy of the SHA256 block and modified as follows:
- for MD5, just s/SHA256/MD5/
- for SHA384, adapt the dependency line then s/SHA256/SHA384
- for SHA1, s/SHA256/SHA1/ then manually adapt the plaintext length for the
cases with "!trunc, B-1" and "!trunc, B", as the MAC length (20) is not a
multiple of the block size (16) for this hash
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- plaintext length = 0 or 1
- plaintext length + MAC length = -1 or 0 mod block_size
(using the minimum plaintext length that works)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Compared to the previous approach of having the bad padding provided as input
to the testing function, this allows to test more kinds of incorrect data,
with less test cases in the .data file and more important no manually-generated
non-trivial data in the test case parameters, making it much easier to
complete the testing matrix.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
PSA_ALG_ECB_NO_PADDING came in to the PSA Crypto API spec v1.0.0, but
was not implemented yet in the mbed TLS implementation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
They did not match their description, probably due to a botched manual
endianness conversion where the nibbles also got swapped.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Follow the PSA Crypto specification which was updated between 1.0 beta3
and 1.0.0.
Add corresponding test cases.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
mbedtls_ecp_write_key is a mirror function to mbedtls_ecp_read_key, which
writes a private key back into a byte buffer in the correct format.
This is a helpful convenience function, since the byte order is defined
differently between Montgomery and Weierstrass curves. Since this difference
is accounted for in mbedtls_ecp_read_key, it made sense to add
mbedtls_ecp_write_key for the purpose of abstracting this away such that
psa_export_key doesn't need to take byte order into account.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Test cases that force a specific ciphersuites are only executed if
this ciphersuite is enabled. But there are test cases (for RC4) whose
goal is to check that the ciphersuite is not used. These test cases
must run even if (or only if) the ciphersuite is disable, so add an
exception for these test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This makes the implementation of mbedtls_param_failed()
for testing purpose available to programs. Thus removing
the ad-hoc implementations in programs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, isolate mbedtls_param_failed() long
jump data and set up from unit test data and code.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, isolate mbedtls_param_failed() call check
from unit test data.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, move mbedtls_param_failed() call location
record into a context dedicated to mbedtls_param_failed().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Do not hexify binary data to compare them, do compare
them directly. That simplifies the check code and save
memory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove `hex` in name of variables of type data_t to reserve it
for variables of type char* that are the hexadecimal
representation of a data buffer.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Executed "./scripts/bump_version.sh --version 2.23.0 --so-crypto 5"
A symbol has been removed from the mbedcrypto library since the last
release:
mbedtls_ecc_group_to_psa ( enum mbedtls_ecp_group_id grpid,
size_t* bits )
This is an ABI break and we need to increase the SO version.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The metadata tests depend on the corresponding feature because there
is no guarantee that the metadata is correct if the feature is
disabled. There are metadata test cases for some algorithms and key
types that are declared but not supported. These test cases are
present but can never run.
It is debatable whether having these test cases is a good thing in
case they become runnable in the future, or a bad thing because
they're dead code. We're working on detecting test cases that are
never executed for accidental reasons (e.g. typo in a dependency or
missing configuration on the CI), and having test cases that are
deliberately never executed messes this up. So remove these test
cases. If we do implement the corresponding feature, it'll be easy to
add the corresponding metadata test cases.
The features that had metadata tests but no implementations were:
* SHA-512/256 and SHA-512/224 (hypothetical dependency: MBEDTLS_SHA512_256)
* DSA (hypothetical dependency: MBEDTLS_DSA_C)
* SHA-3 and HMAC-SHA-3 (hypothetical dependency: MBEDTLS_SHA3_C)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Check that every available test case in the test suites and ssl-opt.sh
has been executed at least once.
For the time being, only report a warning, because our coverage is
incomplete. Once we've updated all.sh to have full coverage, this
warning should become an error.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is a new script designed to analyze test outcomes collected
during a whole CI run.
This commit introduces the script, the code to read the outcome file,
and a very simple framework to report errors. It does not perform any
actual analysis yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
With previous refactorings, some functions are now solely meant to be
called from other functions in a particular class. Move them into this
class.
No behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make the structure more Pythonic: use classes for abstraction and
refinement, rather than higher-order functions.
Convert walk(function, state, data) into instance.walk(data) where
instance has a method that implements function and state is a field of
instance.
No behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rework mbedtls_test_unhexify to extend its scope of usage.
Return in error when the function detects an error instead
of calling mbedtls_exit().
Improve safety by checking the output buffer is not overrun.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In test functions calling mbedtls_test_unhexify(), change the
type of the associated parameters from `char*` to `data_t`.
That way the `unhexify` operation is done by the test
framework and not by the unit test code.
Use for the new parameters of type data_t the name of the
local variable that use to store the `unhexify` version of
the `char*` parameter.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of mbedtls_ccm_star_encrypt_and_tag/auth_decrypt from
`char *` to `data_t` to get rid of the calls to
mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
- Use two different buffers to store the plain and cipher
text as expected by the library functions.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of aes_encrypt_ofb() from `char *` to `data_t` to get rid
of the calls to mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
- Add assertion on fragment_size parameter
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of mbedtls_nist_kw_wrap/unwrap() from `char *` to `data_t`
to get rid of the calls to mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters of
test_chacha20() from `char *` to `data_t` to get rid of the
calls to mbedtls_test_unhexify():
- Reduce the size of output[] buffer to 375 as its content
is "ASCII expended" into a buffer of 751 bytes.
- Align naming of variables to store and check the
output of mbedtls_chacha20_crypt(). No *dst* variables
anynore, only *output* variables.
- Use two different buffers to store the expected output
of mbedtls_chacha20_crypt() (expected_output_str[]) and
the ASCII string representation of the output of
mbedtls_chacha20_crypt() (output_string[]). Both were
stored in dst_str[] before.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of test_hkdf() from `char *` to `data_t` to get rid of the
calls to mbedtls_test_unhexify():
- Align naming of variables related to the expected okm
- Rename `okm_hex[]` to `okm_string[]`
- Added TEST_ASSERT( expected_okm_len <= sizeof( okm ) ) to check
that the okm[] buffer is large enough for the okm output.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of some test functions from `char *` to `data_t` to get
rid of the calls to mbedtls_test_unhexify():
- Align the name of source data length local variable
with the name of the local variable containing the
source data, respectively src_str and src_str_len.
- Change the type of length, index local variables
from int to size_t.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of linking common test objects in programs,
add the top-level mbedtls_test target.
This target consists of the common test objects.
It is necessary to declare it at the top-level as both
tests and programs will depend on it and it is necessary
to synchronize the compilation of those objects for tests
and programs for the case of parallel building.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use the mbedtls_test_ prefix for (c)make variables
related to test common code.
This aligns with the prefix used for the common test
functions.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Parametrize the code that iterates over test case descriptions by the
function to apply on each description.
No behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Call all.sh for sanity checks, rather than maintain an explicit list.
This was done in .travis.yml in 3c7ffd7a40
Travis has diverged from basic-in-docker. This commit updates the
description of basic-in-docker to no longer refer to Travis. Alignment
with Travis may be desirable but that is beyond the scope of this commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the declaration of ./include and ./library
as include directories for all targets.
Prefer being more local and declare include directories
at the target level using target_include_directories().
Note that there is no need to declare explicitely
./include as an include directory for tests as they
inherit it from the "mbed librairies".
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Pass the "certificate policies" extension to the callback supplied to
mbedtls_x509_crt_parse_der_with_ext_cb() if it contains unsupported
policies. This allows the callback to fully replicate the behaviour
of the deprecated MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
configuration.
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
These fields might be shifted accordingly in `ssl_parse_record_header()`
when receiving a connection with CID, so they require a manual update
after calling the generic `mbedtls_ssl_reset_in_out_pointers()`.
This commit also adds a regression test which is run by all.sh.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Also normalize the first line of the copyright headers.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i '
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I {
i\
/*
s/^\// /
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! i\
* SPDX-License-Identifier: Apache-2.0\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Another coverity bug - #350039
When this test discovers a key of the wrong type, it still throws it
through the export function in order to check that it too will detect
this as a not permitted action. For the buffer and buffer length
arguments it passes in a local pointer (which will most likely be NULL),
and the sizeof that pointer, as it knows that they will never be used.
Coverity rightly (imho) flagged this as suspicious - if we are going to
pass in incorrect parameters, at least make them obviously incorrect, and
ones that will not potentially cause errors if the code later changes.
There is, for example safety checks for zero length buffer, but less
protection for an insufficiently sized one.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i '
# Remove Mbed TLS declaration if it occurs before the copyright line
1,/Copyright.*Arm/I {
/This file is part of/,$ {
/Copyright.*Arm/I! d
}
}
# Convert non-standard header in scripts/abi_check.py to the format used in the other scripts
/"""/,/"""/ {
# Cut copyright declaration
/Copyright.*Arm/I {
h
N
d
}
# Paste copyright declaration
/"""/ {
x
/./ {
s/^/# / # Add #
x # Replace orignal buffer with Copyright declaration
p # Print original buffer, insert newline
i\
s/.*// # Clear original buffer
}
x
}
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! {
i\
# SPDX-License-Identifier: Apache-2.0\
#\
# Licensed under the Apache License, Version 2.0 (the "License"); you may\
# not use this file except in compliance with the License.\
# You may obtain a copy of the License at\
#\
# http://www.apache.org/licenses/LICENSE-2.0\
#\
# Unless required by applicable law or agreed to in writing, software\
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
# See the License for the specific language governing permissions and\
# limitations under the License.
# Insert Mbed TLS declaration if it is missing
/This file is part of/! i\
#\
# This file is part of Mbed TLS (https://tls.mbed.org)
}
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
1. When `ssl_server2` export key functionality fails,
don't exit the server, but reset it, to have the
server recover for next connection.
2. Add text filters for `export keys functionality` test in ssl-opt.sh
to check for additional output, to verify if the export suceeded.
This was discovered in the `ssl-opt.sh` script, where the server exited,
before the test tried to kill the server priocess, resulting in a
`kill: No such process` message.
Fixes#2662
Signed-off-by: Ron Eldor <Ron.Eldor@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep "\<mbedtls_test_rnd_"
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexcmp
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep unhexify_alloc
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexify
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of random.c file is to contain the helper
functions to generate random numbers that have been
in helpers.function so far.
The purpose of random.h is to contain the interface
exposed by random.c thus helper function prototypes.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of helpers.c file is to contain the helper
functions that have been in helpers.function so far and
that are not related to the mechanism of unit test
execution and not related to random number generation
(will be moved in a dedicated file).
The purpose of helpers.h is to contain the interface
exposed by helpers.c thus helper function prototypes.
Make the changes in the build systems (make and cmake)
to build helpers.c and link it to test executables
along with mbedtls library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix for coverity bugs 349041, 349052
Allocated pointers could potentially be leaked in the case of errors.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Strict platforms cannot be expected to accept C99 code as valid
when earlier standards versions are selected.
This helps the programs build on Solaris-like platforms (e.g.
illumos).
Fixes#3420
Signed-off-by: nia <nia@netbsd.org>
Just adding an empty file. The purpose of this header
file is to contain the definition of generic macros
used for the purpose of testing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving the content of helpers.function
to its own compilation unit, remove/add static qualifiers
where appropriate.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Create an include folder dedicated to include files for
tests. With the upcoming work on tests for PSA crypto
drivers the number of includes specific to tests is going
to increase significantly thus create a dedicated folder.
Don't put the include files in the include folder but in
include/test folder. This way test headers can be included
using a test/* path pattern as mbedtls and psa headers
are included using an mbedtls/* and psa/* path pattern.
This makes explicit the scope of the test headers.
Move the existing includes for tests into include/test and
update the code and build systems (make and cmake)
accordingly.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add the min/max version negotiation tests from ssl-opt.sh as unit
tests for the sake of utility and easier running of tests during
development
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Instead, we insert a comment containing GDB_BREAK_HERE in the line we
want to break at, and let the gdb script search for it.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This is a convenience for when we get log files from failed CI runs, or attach
them to bug reports, etc.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
A lot of DTLS test are timing-sensitive, especially those that contain
assertions about retransmission. Sometimes some DTLS test fails intermittently
on the CI with no clear apparent reason; we need more information in the log
to understand the cause of those failures.
Adding a proxy means we'll get timing information from the proxy logs.
An alternative would be to add timing information to the debug output of
ssl_server2 and ssl_client2. But that's more complex because getting
sub-second timing info is outside the scope of the C standard, and our current
timing module only provides a APi for sub-second intervals, not absolute time.
Using the proxy is easier as it's a single point that sees all messages, so
elapsed time is fine here, and it's already implemented in the proxy output.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While pure sh doesn't have a concept of local variables, we can partially
emulate them by unsetting variables before we exit the function, and use the
convention of giving them lowercase names to distinguish from global
variables.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Since dd prints everything on stderr, both normal status update and actual
errors when they occur, redirecting that to /dev/null is a trade-off that's
acceptable in quiet mode (typically used on a developer's machine and the
developer will re-run in non-quiet mode if anything fails without sufficient
detail in the output), but not that much in non-quiet mode.
For example, if our dd invocation fails because the disk in full on a CI
machine, we want the error to be reported at the time we invoke dd, and not
later when a seemingly unrelated test fails due to an incorrect seedfile.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently we draw pseudo-random numbers at the beginning and end of the main
loop. With ECP_RESTARTABLE, it's possible that between those two occasions we
returned from the multiplication function, hence lost our internal DRBG
context that lives in this function's stack frame. This would result in the
same pseudo-random numbers being used for blinding in multiple places. While
it's not immediately clear that this would give rise to an attack, it's also
absolutely not clear that it doesn't. So let's avoid that by using a DRBG
context that lives inside the restart context and persists across
return/resume cycles. That way the RESTARTABLE case uses exactly the
same pseudo-random numbers as the non-restartable case.
Testing and compile-time options:
- The case ECP_RESTARTABLE && !ECP_NO_INTERNAL_RNG is already tested by
component_test_no_use_psa_crypto_full_cmake_asan.
- The case ECP_RESTARTABLE && ECP_NO_INTERNAL_RNG didn't have a pre-existing
test so a component is added.
Testing and runtime options: when ECP_RESTARTABLE is enabled, the test suites
already contain cases where restart happens and cases where it doesn't
(because the operation is short enough or because restart is disabled (NULL
restart context)).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Similarly to the recently-added tests for dependencies on CTR_DRBG:
constrained environments will probably want only one DRBG module, and we
should make sure that tests pass in such a configuration.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Invasive testing strategy
Create a new header `common.h`.
Introduce a configuration option `MBEDTLS_TEST_HOOKS` for test-specific code, to be used in accordance with the invasive testing strategy.
The list in the pre-push hook was redundant with the list of `check_*`
components in all.sh, and unsurprisingly it was outdated.
Missing components were:
- check_recursion
- check_changelog
- check_test_cases
- check_python_files
- check_generate_test_code
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The primary purpose is to use it to run all.sh -k -q in the pre-push hook, but
this can be useful in any circumstance where you're not interested in the full
output from each component and just want a short summary of which components
were run (and if any failed).
Note that only stdout from components is suppressed, stderr is preserved so
that errors are reported. This means components should avoid printing to
stderr in normal usage (ie in the absence of errors).
Currently all the `check_*` components obey this convention except:
- check_generate_test_code: unittest prints progress to stderr
- check_test_cases: lots of non-fatal warnings printed to stderr
These components will be fixed in follow-up commits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
People who prefer to rely on HMAC_DRBG (for example because they use it for
deterministic ECDSA and don't want a second DRBG for code size reasons) should
be able to build and run the tests suites without CTR_DRBG.
Ideally we should make sure the level of testing (SSL) is the same regardless
of which DRBG modules is enabled, but that's a more significant piece of work.
For now, just ensure everything builds and `make test` passes.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While at it, declare deps on ENTROPY as well.
A non-regression test will be added in a follow-up commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Enable branch coverage output in basic_build_test.sh. This
includes enabling branch coverage output to the lcov make target,
which is disabled by default.
Signed-off-by: Dan Handley <dan.handley@arm.com>
TLS 1.3 and DTLS 1.2 + CID hide the real content type of a record
within the record's inner plaintext, while always using the same
content type for the protected record:
- TLS 1.3 always uses ApplicationData
- DTLS 1.2 + CID always uses a special CID content type.
This commit enhances the record encryption unit test to check
that the record content type is indeed correctly hidden.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Convert all text files to Unix line endings unless they're Windows
stuff.
Make sure that all text files have a trailing newline.
Remove whitespace at the end of lines.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We're only interested in files that are committed and pushed to be
included in Mbed TLS, not in any other files that may be lying around.
So ask git for the list of file names.
This script is primarily intended to run on the CI, and there it runs
on a fresh Git checkout plus potentially some other checkouts or
leftovers from a previous part of the CI job. It should also run
reasonably well on developer machines, where there may be various
additional files. In both cases, git is available.
Ad hoc directory exclusions are no longer needed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
