previously a single function was used for most test cases (ctr_drbg_validate) making it harder to understand what the exact scenario is as a result it was split into easier to understand functions.
the testing functions were re-factored so that the common code was extracted to a single static function (removing the need for unclear goto statements).
As part of the re-factor the test functions now use data_t for parameters (support for this was introduced in previous rebase),
the change is designed to make configuring 128bit keys for ctr_drbg more similar to other configuration options. Tests have been updated accordingly.
also clarified test naming.
This commit adds a test to ssl-opt.sh which exercises the behavior
of the library in the situation where a single proper fragment
of a future handshake message is received prior to the next
expected handshake message (concretely, the client receives
the first fragment of the server's Certificate message prior
to the server's ServerHello).
This commit adds two builds to all.sh which use a value of
MBEDTLS_SSL_DTLS_MAX_BUFFERING that allows to run the
reordering tests in ssl-opt.sh introduced in the last commit.
This commit adds tests to ssl-opt.sh which trigger code-paths
responsible for freeing future buffered messages when the buffering
limitations set by MBEDTLS_SSL_DTLS_MAX_BUFFERING don't allow the
next expected message to be reassembled.
These tests only work for very specific ranges of
MBEDTLS_SSL_DTLS_MAX_BUFFERING and will therefore be skipped
on a run of ssl-opt.sh in ordinary configurations.
This commit adds functions requires_config_value_at_most()
and requires_config_value_at_least() which can be used to
only run tests when a numerical value from config.h
(e.g. MBEDTLS_SSL_IN_CONTENT_LEN) is within a certain range.
The negotiated MFL is always the one suggested by the client, even
if the server has a smaller MFL configured locally. Hence, in the test
where the client asks for an MFL of 4096 bytes while the server locally
has an MFL of 512 bytes configured, the client will still send datagrams
of up to ~4K size.
Depending on the settings of the local machine, gnutls-cli will either try
IPv4 or IPv6 when trying to connect to localhost. With TLS, whatever it tries
first, it will notice if any failure happens and try the other protocol if
necessary. With DTLS it can't do that. Unfortunately for now there isn't
really any good way to specify an address and hostname independently, though
that might come soon: https://gitlab.com/gnutls/gnutls/issues/344
A work around is to specify an address directly and then use --insecure to
ignore certificate hostname mismatch; that is OK for tests that are completely
unrelated to certificate verification (such as the recent fragmenting tests)
but unacceptable for others.
For that reason, don't specify a default hostname for gnutls-cli, but instead
let each test choose between `--insecure 127.0.0.1` and `localhost` (or
`--insecure '::1'` if desired).
Alternatives include:
- having test certificates with 127.0.0.1 as the hostname, but having an IP as
the CN is unusual, and we would need to change our test certs;
- have our server open two sockets under the hood and listen on both IPv4 and
IPv6 (that's what gnutls-serv does, and IMO it's a good thing) but that
obviously requires development and testing (esp. for windows compatibility)
- wait for a newer version of GnuTLS to be released, install it on the CI and
developer machines, and use that in all tests - quite satisfying but can't
be done now (and puts stronger requirements on test environment).
From Hanno:
When a server replies to a cookieless ClientHello with a HelloVerifyRequest,
it is supposed to reset the connection and wait for a subsequent ClientHello
which includes the cookie from the HelloVerifyRequest.
In testing environments, it might happen that the reset of the server
takes longer than for the client to replying to the HelloVerifyRequest
with the ClientHello+Cookie. In this case, the ClientHello gets lost
and the client will need retransmit. This may happen even if the underlying
datagram transport is reliable.
This commit continues commit 47db877 by removing resend guards in the
ssl-opt.sh tests 'DTLS fragmenting: proxy MTU, XXX' which sometimes made
the tests fail in case the log showed a resend from the client.
See 47db877 for more information.
Unify the three existing validation functions (with prediction
resistance, with manual reseeding between generations, and with no
reseeding) into a single function that supports these three scenarios
plus a fourth one (reseed before the first generation).
The four supported scenarios cover the three scenarios from the
current CAVP test vectors (no reseed, reseed before generating,
prediction resistance) plus a fourth scenario used by the existing
test vectors (reseed after generating).
(cherry picked from commit cee9bedee6bc1a8e2b22fa8a31647b62ebb8a0a4)
The ctr_drbg_validate_xxx test functions had hard-coded sizes for the
entropy and the output size. Generalize the sizes.
Keep track of the current entropy size.
Unhexify the expected output and compare with the actual output,
rather than hexifying the actual output and comparing the hex.
When a server replies to a cookieless ClientHello with a HelloVerifyRequest,
it is supposed to reset the connection and wait for a subsequent ClientHello
which includes the cookie from the HelloVerifyRequest.
In testing environments, it might happen that the reset of the server
takes longer than for the client to replying to the HelloVerifyRequest
with the ClientHello+Cookie. In this case, the ClientHello gets lost
and the client will need retransmit. This may happen even if the underlying
datagram transport is reliable.
This commit removes a guard in the ssl-opt.sh test
'DTLS fragmenting: proxy MTU, resumed handshake' which made
the test fail in case the log showed a resend from the client.
We previously observed random-looking failures from this test. I think they
were caused by a race condition where the client tries to reconnect while the
server is still closing the connection and has not yet returned to an
accepting state. In that case, the server would fail to see and reply to the
ClientHello, and the client would have to resend it.
I believe logs of failing runs are compatible with this interpretation:
- the proxy logs show the new ClientHello and the server's closing Alert are
sent the same millisecond.
- the client logs show the server's closing Alert is received after the new
handshake has been started (discarding message from wrong epoch).
The attempted fix is for the client to wait a bit before reconnecting, which
should vastly enhance the probability of the server reaching its accepting
state before the client tries to reconnect. The value of 1 second is arbitrary
but should be more than enough even on loaded machines.
The test was run locally 100 times in a row on a slightly loaded machine (an
instance of all.sh running in parallel) without any failure after this fix.
Use the same values as other 3d tests: this makes the test hopefully a bit
faster than the default values, while not increasing the failure rate.
While at it:
- adjust "needs_more_time" setting for 3d interop tests (we can't set the
timeout values for other implementations, so the test might be slow)
- fix some supposedly DTLS 1.0 test that were using dtls1_2 on the command
line
Now that the UDP proxy has the ability to delay specific
handshake message on the client and server side, use
this to rewrite the reordering tests and thereby make
them independent on the choice of PRNG used by the proxy
(which is not stable across platforms).
This commit adds four tests to ssl-opt.sh running default
DTLS client and server with and without datagram packing
enabled, and checking that datagram packing is / is not
used by inspecting the debug output.
The UDP proxy does currently not dissect datagrams into records,
an hence the coverage of the reordering, package loss and duplication
tests is much smaller if datagram packing is in use.
This commit disables datagram packing for most UDP proxy tests,
in particular all 3D (drop, duplicate, delay) tests.
Now that datagram packing can be dynamically configured,
the test exercising the behavior of Mbed TLS when facing
an out-of-order CCS message can be re-introduced, disabling
datagram packing for the sender of the delayed CCS.
The tests "DTLS fragmenting: none (for reference)" and
"DTLS fragmenting: none (for reference) (MTU)" used a
maximum fragment length resp. MTU value of 2048 which
was meant to be large enough so that fragmentation
of the certificate message would not be necessary.
However, it is not large enough to hold the entire flight
to which the certificate belongs, and hence there will
be fragmentation as soon as datagram packing is used.
This commit increases the maximum fragment length resp.
MTU values to 4096 bytes to ensure that even with datagram
packing in place, no fragmentation is necessary.
A similar change was made in "DTLS fragmenting: client (MTU)".
The test exercising a delayed CCS message is not
expected to work when datagram packing is used,
as the current UDP proxy is not able to recognize
records which are not at the beginning of a
datagram.
Adds a requirement for GNUTLS_NEXT (3.5.3 or above, in practice we should
install 3.6.3) on the CI.
See internal ref IOTSSL-2401 for analysis of the bugs and their impact on the
tests.
For now, just check that it causes us to fragment. More tests are coming in
follow-up commits to ensure we respect the exact value set, including when
renegotiating.
Note: no interop tests in ssl-opt.sh for now, as some of them make us run into
bugs in (the CI's default versions of) OpenSSL and GnuTLS, so interop tests
will be added later once the situation is clarified. <- TODO
Test application names and function file names can be constructed
based on the followed naming convention. This commit documents the
naming convention and removes explicit listing of the test
executables and the lookup table for finding .function file.
When using Python 2 (which is done in the Makefile), all #line
directives from the test code were generated with the line number 1.
This traces back to the change in the method name for generators in
Python 2 (next) vs Python 3 (__next__). Override both methods so that
the script remains compatible with both Python 2 and Python 3.
Function test_snprintf() is called by run_test_snprintf() with constant test
data. It gets inlined and is subjected to snprintf format truncation checks
introduced by -Wformat-truncation in gcc-7. -Wformat-truncation is turned
On by -Wall and other similar options. It results in error with -Werror.
-Wformat-truncation makes tests performed by run_test_snprintf() redundant
on gcc. But they are still relevant for other compilers. This commit prevents
inlining of test_snprintf() to avoid gcc compile time checks.
Code generator has been modified to generate case statements for dependency checks and expression checks.
This commit updates the unit tests accordingly.
Test suite header code was not gaurded with test suite dependency.
But some test suites have additional code in the headers section.
Variables in that section become unused if suite functions are
gaurded. Hence gaurded the headers section.
But this changed cuased missing types in get_expression() function
that was originally accessing types defined through suite headers.
Hence had to gaurd expressions code as well.
Gaurding expressions does not allow parsing the parameters when
some types or hash defs are gaurded. Hence added function
check_test() to check if test is allowed or not before parsing the
parameters.
