Since they became equivalent after moving the is_sign checking back to
the PSA core, they're now redundant, and the generic mac_setup function
can just be called directly.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since a valid mac operation context would guarantee that the stored
mac size is >= 4, it wasn't immediately obvious that the zero-length
check is meant for static analyzers and a bit of robustness.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The PSA core checks the key type and algorithm combination before
calling the driver, so the driver doesn't have to do this once more.
The PSA core will also not start an operation with a requested length
which is larger than the full MAC output size, so the output length check
in the driver isn't needed as long as the driver returns an error on
mac_setup if it doesn't support the underlying hash algorithm.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
It makes sense to do the length checking in the core rather than expect
each driver to deal with it themselves. This puts the onus on the core to
dictate which algorithm/key combinations are valid before calling a driver.
Additionally, this commit also updates the psa_mac_sign_finish function
to better deal with output buffer sanitation, as per the review comments
on #4247.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
As psa_mac_sign_finish / psa_mac_verify_finish already checks that the
operation structure is valid (id is non-zero), the driver itself doesn't
have to check for that anymore. If the operation has a driver ID assigned,
it means that driver has returned success from its setup function, so the
algorithm value will be set correctly.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The key passed to the driver has been imported by the PSA Core, meaning
its length has already been verified, and the driver can rely on the
buffer length and key attributes being consistent.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This means there is no longer a need to have an internal HMAC API, so
it is being removed in this commit as well.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Prefix with 'mbedtls_psa' as per the other types which implement some
sort of algorithm in software.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Now renamed to mbedtls_psa_safer_memcmp, it provides a single location
for buffer comparison.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The purpose of key_set was to guard the operation structure from being
used for update/finish before a key was set. Now that the implementation
fully adheres to the PSA API, that function is covered by the `alg`
variable instead. It's set to the algorithm in use when a key is set, and
is zero when the operation is reset/invalid.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* Early return since there's nothing to clean up
* Get rid of unnecessary local variable
* Check algorithm validity for MAC in the PSA core instead of in the driver
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Apparently it was at some point assumed that there would be
support for MAC algorithms with IV, but that hasn't been
implemented yet. Until that time, these context structure
members are superfluous and can be removed.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Typedef'ed structures are suffixed _t
Also updated the initialiser macro with content that actually
matches the structure's content.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since HMAC moved into its own compilation unit, the internal API needed
to be documented and finalized. This means no more reaching deep into
the operation structure from within the PSA Crypto core. This will make
future refactoring work easier, since internal HMAC is now opaque to the
core.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 3/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of code movement:
* Copied the implementation of safer_memcmp from psa_crypto into
psa_cipher_mac since the mac_verify driver implementation
depends on it, and it isn't available through external linkage
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 2/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of code movement:
* Early-return success on input with zero-length to mac_update, to
avoid NULL pointers getting passed into the driver dispatch
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 1/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of just moving code:
* Added a sanity check on the key buffer size for CMAC.
* Transfered responsibility for resetting the core members of the
PSA MAC operation structure back to the core (from the driver
wrapper layer)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This is a temporary measure. Other operations in the PSA Core which rely
on this internal HMAC API should be rewritten to use the MAC API instead,
since they can then leverage accelerated HMAC should a platform provide
such acceleration support.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The changed logic is to try a sign-message driver (opaque or transparent);
if there isn't one, fallback to builtin sofware and do the hashing,
then try a sign-hash driver. This will enable to the opaque driver
to fallback to software.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
To avoid code duplication of the old-style SE interface usage
call psa_driver_wrapper_sign/verify_hash function instead of
the direct internal functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Use common funtion for psa_sign_hash and psa_sign_message and one for
psa_verify_hash and psa_verify_message to unify them.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Move the key buffer size calculation code under
tests to avoid check-names.sh to complain about
"likely macros with typos".
This removes the calculation of key buffer
sizes for the test driver from the wrapper based on
static size data. But the code is still there in test
code to be used when we go back to work on the
generation of the driver wrapper.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
pk_get_pk_alg will either return 0 or a pk error code. This means that
the error code will always be a high level module ID and so we just
return ret.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add implementation for MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
Merging as it has been ready for four days now and I prefer not having to go through other rebases especially given the coming change of scope of development (3.0 rather than 2.2x).
Improve comments explaining error code checking, fix incorrect comments
and make a small formatting fix.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
* group setting of attributes before calling get_builtin_key
* return early instead of going to exit when no resources are allocated yet
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Leverage the fact that the get_builtin_key entrypoint returns a key's
attributes, such that a proper size for the builtin key's buffer can
be calculated through the driver's get_key_buffer_size hook.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since the loading attempt of a builtin key might be followed by trying
to load a persistent key, we can only wipe the allocated key data, not
the associated metadata.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The macro always meant 'location', but was mistakenly named 'lifetime'.
Naming it location instead makes much more sense, and drives home the
conceptual differences between location and lifetime values.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Instead of the full attributes struct, it now only takes/returns what it
actually needs to.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Builtin key support for the test driver is always compiled in, and no
longer guarded by MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS.
Parsing the key slot from the buffer by cast and assign instead of memcmp.
For exporting keys, the test driver no longer reaches into the key
identifier in order to check whether a key is builtin, but rather
assumes so based on the key buffer length. It's the driver's
responsibility to be able to detect the key material it returned as part
of the get_builtin_key operation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
As part of test_psa_crypto_drivers, define a builtin symmetric
plus an ECC key on the test driver lifetime.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This reverts commit c75d9f589b.
This was merged by mistake in development instead of development_3.0.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This reverts commit 48f6d0d6e5.
This was merged by mistake in development instead of development_3.0.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This reverts commit 9a86843470.
This was merged by mistake in development instead of development_3.0.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
An incorrect error code addition was spotted by the new invasive testing
infrastructure whereby pk_get_pk_alg will always return a high level
error or zero and pk_parse_key_pkcs8_unencrypted_der will try to add
another high level error, resulting in a garbage error code.
Apply the same fix from ae3741e8a to fix the bug.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Replace all occurences of error code addition in the library with the new
MBEDTLS_ERROR_ADD macro.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a missing guard for the definition and declaration of
mbedtls_test_hook_error_add.
Also make the declaration always visible when MBEDTLS_TEST_HOOKS is
enabled. This fixes an issue when MBEDTLS_ERROR_C is not defined but
MBEDTLS_TEST_HOOKS is.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix unused parameter warnings when MBEDTLS_TEST_HOOKS is not enabled.
A few issues were caught by check-names.sh namely:
- mbedtls_error_add was not capitalised.
- mbedtls_test_hook_error_add was being defined multiple times as the
definition was in a header.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The previous implementation of the error addition interface did not comply
with the invasive testing architecture guidelines. This commit fixes that
by:
- Renaming functions/macros/variables to follow the mbedtls_error_xxx or
mbedtls_test_hook_xxx convention.
- Making mbedtls_test_hook_error_add a global variable that can be set
by the testing code.
- Using a static inline function call, as opposed to macro, to keep
discrepancies between debug and production version to a minimum.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Change the signature of the `hook` parameter of `mbedtls_set_err_add_hook`
to use the actual signature of the function as opposed to `void *`. This
fixes a warning when compiling with clang `-pedantic`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` and error.h are the more logical place to keep this code and it
prevents issues with building `common.c` and conflicts with other projects
that use mbedtls (such as mbedOS).
`error.c` has been automatically generated by first adding the code to
`error.fmt` and then running `./scripts/generate_errors.pl`.
Also add parenthesis to the addition in `MBEDTLS_ERR_ADD`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix building by adding `common.c` to the build scripts (both make and Cmake).
Also reworks the hook function pointer (also renamed to `err_add_hook`) to be
a static local to `common.c` with a setter function to set the pointer to a
checking function.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` is a file generated from `error.h` and thus cannot contain the code
that was previously added. This commit fixes that issue by moving the
`MBEDTLS_ERR_ADD` macro and associated function and function pointer into
`common.h` and `common.c`.
Also fix a typo in `tests/include/test/helpers.h` where tabs were accidentally
used instead of spaces.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
All occurences of manual error code addition/combination, in `rsa.c`, have
been replaced with the `MBEDTLS_ERR_ADD` macro.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Adds a macro (`MBEDTLS_ERR_ADD`) to add error codes together and check that the
result will not be corrupted. This additional check is only enabled during
testing when `MBEDTLS_TEST_HOOKS` is defined.
Also includes a reference usage example in `rsa.c` where two high-level error
codes could be incorrectly added together under the right conditions. This now
ensures that when this error occurs during testing it will be correctly
reported.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Corresponds better to the validation done in other modules of PSA Crypto.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Capitalise the MPS trace macros, as per the coding style (and make a slight
change to naming convention to avoid a name collision).
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
As we want to do Mbed TLS aead operations as a
driver does, aead operations should not access
the key slot as key slots are not available to
drivers.
Second step in this PR: do not unlock the key slot
as part of operation abort.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As we want to do Mbed TLS aead operations as a
driver does, aead operations should not access
the key slot as key slots are not available to
drivers.
First step in this PR: move key resolution from
aead operation setup to psa_aead_encrypt/decrypt
APIs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix the subtraction in fix_negative, which was incorrectly not looking
for a carry. This caused the result to be wrong when the least
significant limb of N was 0. Fix#4296.
The bug was introduced by d10e8fae9e
"Optimize fix_negative". Thanks to Philippe Antoine (catenacyber) for
reporting the bug which was found by his EC differential fuzzer.
Credit to OSS-Fuzz.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This header file will contain declarations of functions that are not
part of the public ABI/API, and must not be called from other modules,
but can be called from unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move the handling of the sign out of the base-specific loops. This
both simplifies the code, and corrects an edge case: the code in the
non-hexadecimal case depended on mbedtls_mpi_mul_int() preserving the
sign bit when multiplying a "negative zero" MPI by an integer, which
used to be the case but stopped with PR #2512.
Fix#4295. Thanks to Guido Vranken for analyzing the cause of the bug.
Credit to OSS-Fuzz.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In a TLS client, enforce the Diffie-Hellman minimum parameter size
set with mbedtls_ssl_conf_dhm_min_bitlen() precisely. Before, the
minimum size was rounded down to the nearest multiple of 8.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When creating a persistent key or registering a key
with an invalid key identifier return
PSA_ERROR_INVALID_ARGUMENT instead of
PSA_ERROR_INVALID_HANDLE.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This check was added earlier to avoid useless calls to `memcpy()`
with length `0` in the _frequent_ case where we're not accumulating.
By now, the whole code path has been moved to a branch which is only
executed if the reader is accumulating, and the only time this check
would be relevant is if we happen to feed an empty fragment to the
reader. In this case, the call to memcpy() could be removed, but
since this case is exceptional and the call to memcpy() is still
correct even for a length 0 copy, we remove the check for simplicity
of the code.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
