For explicit proxy commands (included with `-p "$P_PXY <args>` in the test
case), it's the test's writer responsibility to handle IPv6; only fix the
proxy command when we're auto-adding it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This is a convenience for when we get log files from failed CI runs, or attach
them to bug reports, etc.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
A lot of DTLS test are timing-sensitive, especially those that contain
assertions about retransmission. Sometimes some DTLS test fails intermittently
on the CI with no clear apparent reason; we need more information in the log
to understand the cause of those failures.
Adding a proxy means we'll get timing information from the proxy logs.
An alternative would be to add timing information to the debug output of
ssl_server2 and ssl_client2. But that's more complex because getting
sub-second timing info is outside the scope of the C standard, and our current
timing module only provides a APi for sub-second intervals, not absolute time.
Using the proxy is easier as it's a single point that sees all messages, so
elapsed time is fine here, and it's already implemented in the proxy output.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This will allow us to ship the LTS branches in a single archive
This commit was generated using the following script:
# ========================
#!/bin/sh
header1='\ * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later\
*\
* This file is provided under the Apache License 2.0, or the\
* GNU General Public License v2.0 or later.\
*\
* **********\
* Apache License 2.0:\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.\
*\
* **********\
*\
* **********\
* GNU General Public License v2.0 or later:\
*\
* This program is free software; you can redistribute it and/or modify\
* it under the terms of the GNU General Public License as published by\
* the Free Software Foundation; either version 2 of the License, or\
* (at your option) any later version.\
*\
* This program is distributed in the hope that it will be useful,\
* but WITHOUT ANY WARRANTY; without even the implied warranty of\
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\
* GNU General Public License for more details.\
*\
* You should have received a copy of the GNU General Public License along\
* with this program; if not, write to the Free Software Foundation, Inc.,\
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.\
*\
* **********'
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i "
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I s/\/\*/&\n */
# Insert new copyright header
/SPDX-License-Identifier/ i\
$header1
# Delete old copyright header
/SPDX-License-Identifier/,$ {
# Delete lines until the one preceding the mbedtls declaration
N
1,/This file is part of/ {
/This file is part of/! D
}
}
"
# Format copyright header for inclusion into scripts
header2=$(echo "$header1" | sed 's/^\\\? \* \?/#/')
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i "
# Insert new copyright header
/SPDX-License-Identifier/ i\
$header2
# Delete old copyright header
/SPDX-License-Identifier/,$ {
# Delete lines until the one preceding the mbedtls declaration
N
1,/This file is part of/ {
/This file is part of/! D
}
}
"
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i '
# Remove Mbed TLS declaration if it occurs before the copyright line
1,/Copyright.*Arm/I {
/This file is part of/,$ {
/Copyright.*Arm/I! d
}
}
# Convert non-standard header in scripts/abi_check.py to the format used in the other scripts
/"""/,/"""/ {
# Cut copyright declaration
/Copyright.*Arm/I {
h
N
d
}
# Paste copyright declaration
/"""/ {
x
/./ {
s/^/# / # Add #
x # Replace orignal buffer with Copyright declaration
p # Print original buffer, insert newline
i\
s/.*// # Clear original buffer
}
x
}
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! {
i\
# SPDX-License-Identifier: Apache-2.0\
#\
# Licensed under the Apache License, Version 2.0 (the "License"); you may\
# not use this file except in compliance with the License.\
# You may obtain a copy of the License at\
#\
# http://www.apache.org/licenses/LICENSE-2.0\
#\
# Unless required by applicable law or agreed to in writing, software\
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
# See the License for the specific language governing permissions and\
# limitations under the License.
# Insert Mbed TLS declaration if it is missing
/This file is part of/! i\
#\
# This file is part of Mbed TLS (https://tls.mbed.org)
}
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
There are currently 4 tests in ssl-opt.sh with either -C "resend" or -S
"resend", that is, asserting that no retransmission will occur. They sometimes
fail on loaded CI machines as one side doesn't send a message fast enough,
causing the other side to retransmit, causing the test to fail.
(For the "reconnect" test there was an other issue causing random failures,
fixed in a previous commit, but even after that fix the test would still
sometimes randomly fail, even if much more rarely.)
While it's a hard problem to fix in a general and perfect way, in practice the
probability of failures can be drastically reduced by making the timeout
values much larger.
For some tests, where retransmissions are actually expected, this would have
the negative effect of increasing the average running time of the test, as
each side would wait for longer before it starts retransmission, so we have a
trade-off between average running time and probability of spurious failures.
But for tests where retransmission is not expected, there is no such trade-off
as the expected running time of the test (assuming the code is correct most of
the time) is not impacted by the timeout value. So the only negative effect of
increasing the timeout value is on the worst-case running time on the test,
which is much less important, as test should only fail quite rarely.
This commit addresses the easy case of tests that don't expect retransmission
by increasing the value of their timeout range to 10s-20s. This value
corresponds to the value used for tests that assert `-S "autoreduction"` which
are in the same case and where the current value seems acceptable so far.
It also represents an increase, compared to the values before this commit, of
a factor 20 for the "reconnect" tests which were frequently observed to fail
in the CI, and of a factor 10 for the first two "DTLS proxy" tests, which were
observed to fail much less frequently, so hopefully the new values are enough
to reduce the probability of spurious failures to an acceptable level.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The server must check client reachability (we chose to do that by checking a
cookie) before destroying the existing association (RFC 6347 section 4.2.8).
Let's make sure we do, by having a proxy-in-the-middle inject a ClientHello -
the server should notice, but not destroy the connection.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- "Default" should only be used for tests that actually use the defaults (ie,
not passing options on the command line, except maybe debug/dtls)
- All tests in the "Encrypt then MAC" group should start with that string as a
common prefix
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The ssl-opt.sh test cases using session resumption tend to fail occasionally
on the CI due to a race condition in how ssl_server2 and ssl_client2 handle
the reconnection cycle.
The server does the following in order:
- S1 send application data
- S2 send a close_notify alert
- S3 close the client socket
- S4 wait for a "new connection" (actually a new datagram)
- S5 start a handshake
The client does the following in order:
- C1 wait for and read application data from the server
- C2 send a close_notify alert
- C3 close the server socket
- C4 reset session data and re-open a server socket
- C5 start a handshake
If the client has been able to send the close_notify (C2) and if has been
delivered to the server before if closes the client socket (S3), when the
server reaches S4, the datagram that we start the new connection will be the
ClientHello and everything will be fine.
However if S3 wins the race and happens before the close_notify is delivered,
in S4 the close_notify is what will be seen as the first datagram in a new
connection, and then in S5 this will rightfully be rejected as not being a
valid ClientHello and the server will close the connection (and go wait for
another one). The client will then fail to read from the socket and exit
non-zero and the ssl-opt.sh harness will correctly report this as a failure.
In order to avoid this race condition in test using ssl_client2 and
ssl_server2, this commits introduces a new command-line option
skip_close_notify to ssl_client2 and uses it in all ssl-opt.sh tests that use
session resumption with DTLS and ssl_server2.
This works because ssl_server2 knows how many messages it expects in each
direction and in what order, and closes the connection after that rather than
relying on close_notify (which is also why there was a race in the first
place).
Tests that use another server (in practice there are two of them, using
OpenSSL as a server) wouldn't work with skip_close_notify, as the server won't
close the connection until the client sends a close_notify, but for the same
reason they don't need it (there is no race between receiving close_notify and
closing as the former is the cause of the later).
An alternative approach would be to make ssl_server2 keep the connection open
until it receives a close_notify. Unfortunately it creates problems for tests
where we simulate a lossy network, as the close_notify could be lost (and the
client can't retransmit it). We could modify udp_proxy with an option to never
drop alert messages, but when TLS 1.3 comes that would no longer work as the
type of messages will be encrypted.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The splitting of this test into two versions depending on whether SHA-1 was
allowed by the server was a mistake in
5d2511c4d4 - the test has nothing to do with
SHA-1 in the first place, as the server doesn't request a certificate from
the client so it doesn't matter if the server accepts SHA-1 or not.
While the whole script makes (often implicit) assumptions about the version of
GnuTLS used, generally speaking it should work out of the box with the version
packaged on our reference testing platform, which is Ubuntu 16.04 so far.
With the update from Jan 8 2020 (3.4.10-4ubuntu1.6), the patches for rejecting
SHA-1 in certificate signatures were backported, so we should avoid presenting
SHA-1 signed certificates to a GnuTLS peer in ssl-opt.sh.
Limit log output in compat.sh and ssl-opt.sh, in case of failures with
these scripts where they may output seemingly unlimited length error
logs.
Note that ulimit -f uses units of 512 bytes, so we use 10 * 1024 * 1024
* 2 to get 10 GiB.
* origin/pr/2436:
Use certificates from data_files and refer them
Specify server certificate to use in SHA-1 test
refactor CA and SRV certificates into separate blocks
refactor SHA-1 certificate defintions and assignment
refactor server SHA-1 certificate definition into a new block
define TEST_SRV_CRT_RSA_SOME in similar logic to TEST_CA_CRT_RSA_SOME
server SHA-256 certificate now follows the same logic as CA SHA-256 certificate
add entry to ChangeLog
* restricted/pr/550:
Update query_config.c
Fix failure in SSLv3 per-version suites test
Adjust DES exclude lists in test scripts
Clarify 3DES changes in ChangeLog
Fix documentation for 3DES removal
Exclude 3DES tests in test scripts
Fix wording of ChangeLog and 3DES_REMOVE docs
Reduce priority of 3DES ciphersuites
The test used 3DES as the suite for SSLv3, which now makes the handshake fails
with "no ciphersuite in common", failing the test as well. Use Camellia
instead (as there are not enough AES ciphersuites before TLS 1.2 to
distinguish between the 3 versions).
Document some dependencies, but not all. Just trying to avoid introducing new
issues by using a new cipher here, not trying to make it perfect, which is a
much larger task out of scope of this commit.
Don't bail out of all.sh if the OS isn't Linux. We only expect
everything to pass on a recent Linux x86_64, but it's useful to call
all.sh to run some components on any platform.
In all.sh, always run both MemorySanitizer and Valgrind. Valgrind is
slower than ASan and MSan but finds some things that they don't.
Run MSan unconditionally, not just on Linux/x86_64. MSan is supported
on some other OSes and CPUs these days.
Use `all.sh --except test_memsan` if you want to omit MSan because it
isn't supported on your platform. Use `all.sh --except test_memcheck`
if you want to omit Valgrind because it's too slow.
Make the test scripts more portable (tested on FreeBSD): don't insist
on GNU sed, and recognize amd64 as well as x86_64 for `uname -m`. The
`make` utility must still be GNU make.
* development:
ssl-opt.sh: change expected output for large srv packet test with SSLv3
Adapt ChangeLog
Fix bug in SSL ticket implementation removing keys of age < 1s
ssl-opt.sh: Add DTLS session resumption tests
Add ChangeLog entry
Fix typo
Fix hmac_drbg failure in benchmark, with threading
Remove trailing whitespace
Remove trailing whitespace
ssl_server2: add buffer overhead for a termination character
Add missing large and small packet tests for ssl_server2
Added buffer_size and response_size options for ssl-server2. Added appropriate tests.
Solving a conflict in tests/ssl-opt.sh: two set of tests were added at the
same place (just after large packets):
- restartable ECC tests (in this branch)
- server-side large packets (in development)
Resolution was to move the ECC tests after the newly added server large packet
ones.
* development-restricted: (578 commits)
Update library version number to 2.13.1
Don't define _POSIX_C_SOURCE in header file
Don't declare and define gmtime()-mutex on Windows platforms
Correct preprocessor guards determining use of gmtime()
Correct documentation of mbedtls_platform_gmtime_r()
Correct typo in documentation of mbedtls_platform_gmtime_r()
Correct POSIX version check to determine presence of gmtime_r()
Improve documentation of mbedtls_platform_gmtime_r()
platform_utils.{c/h} -> platform_util.{c/h}
Don't include platform_time.h if !MBEDTLS_HAVE_TIME
Improve wording of documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Fix typo in documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Replace 'thread safe' by 'thread-safe' in the documentation
Improve documentation of MBEDTLS_HAVE_TIME_DATE
ChangeLog: Add missing renamings gmtime -> gmtime_r
Improve documentation of MBEDTLS_HAVE_TIME_DATE
Minor documentation improvements
Style: Add missing period in documentation in threading.h
Rename mbedtls_platform_gmtime() to mbedtls_platform_gmtime_r()
Guard decl and use of gmtime mutex by HAVE_TIME_DATE and !GMTIME_ALT
...
While these tests and the issue with it are pre-existing:
- we previously didn't understand that the issue was an openssl bug
- failures seem to have become more frequent since the recent changes
So let's disable these fragile tests in order to get a clean CI. We still have
the tests against gnutls-serv for interop testing.
While making the initial commit, I thought $OPENSSL_LEGACY was not affect by
this bug, but it turns out I was wrong. All versions of OpenSSL installed on
the CI are. Therefore, the corresponding tests are disabled for the same
reason as the gnutls-cli tests above it.
This commit is only about the tests that were added in the recent
fragmentation work. One of those two tests had a particularly
annoying mode of failure: it failed consistently with seed=1 (use in the
release version of all.sh), once #1951 was applied. This has nothing
particular to do with #1951, except that by changing retransmission behaviour
1951 made the proxy run into a path that triggered the OpenSSL bug with this
seed, while it previously did that only with other seeds.
Other 3d interop test are also susceptible to triggering this OpenSSL bug or
others (or bugs in GnuTLS), but they are left untouched by this commit as:
- they were pre-existing to the recent DTLS branches;
- they don't seem to have the particularly annoying seed=1 mode of failure.
However it's probably desirable to do something about them at some point in
the future.
