To facilitate maintenance and to make it easier to reproduce all.sh builds
manually, remove the long, repeated list of -D options from
component_test_psa_crypto_config_basic and component_test_psa_crypto_drivers
and put it in a header file instead.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When building with make, `make test` runs `run-test-suites.pl` which has a
verbose mode that reports the failing test cases, but it didn't provide a
way to enable this verbose mode. With the present commit, you can run `make
test TEST_FLAGS=-v` to use verbose mode.
Base the default for verbose mode on the same environment variable that
`make test` uses when building with CMake: default off, but enabled if
`CTEST_OUTPUT_ON_FAILURE` is true. In particular, verbose mode will now be
on when building from `all.sh`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Was getting errors like:
In file included from /usr/include/limits.h:25:0,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:168,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/syslimits.h:7,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:34,
from ../include/mbedtls/check_config.h:30,
from ../include/mbedtls/build_info.h:81,
from common.h:26,
from asn1write.c:20:
/usr/include/features.h:367:25: fatal error: sys/cdefs.h: No such file or directory
There are two packages to choose from: armhf or armel. Since the comment
in all.sh says we're trying to be close to Debian's "armel"
architecture, choose that, and fix a comment that was mentioning
gnueabihf for no apparent reason.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently it can't be mandatory, since we can't install the required toolchain
on Jenkins right away.
Also, while at it, remove `SHELL='sh -x'` from the other arm5vte component; it
was a leftover from debugging.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Call the output size macros specifically with asymmetric keys, which
would cause a crash (and thus test fail) should this fix get regressed.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The previous implementation was hard to understand and could in principle
fail to notice if there was a test case failure and the writing of the
line "Note: $TOTAL_FAIL failures." failed. KISS.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Save the "Test Report Summary" to a file. This can help both CI scripts and
human readers who want the summary after the fact without having to copy the
console output.
Take care to exit with a nonzero status if there is a failure while
generating the test report summary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The makefiles look for python3 on Unix-like systems where python is often
Python 2. This uses sh code so it doesn't work on Windows. On Windows, the
makefiles just assume that python is Python 3.
The code was incorrectly deciding not to try python3 based on WINDOWS_BUILD,
which indicates that the build is *for* Windows. Switch to checking WINDOWS,
which indicates that the build is *on* Windows.
Fix#4774
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This file had temporary MBEDTLS_xxx dependencies because it was created when
support for PSA_WANT_xxx was still incomplete. Switch to the PSA_WANT_xxx
dependencies
This fixes the bug that "PSA storage read: AES-GCM+CTR" was never executed
because there was a typo in a dependency.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Previously the check was convoluted. This has been simplified
and given a more appropriate suggestion as per gilles suggestion
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
- Reword the comment on config.h to suggest that
`MAX_INTERMEDIATE_CA` may not exist in the config.
- Add a comment explaining why the tests are more restrictive
than necessary.
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
- Abstract out repetitive checks for IN and OUT content lens
- Remove unclear comment and redundant echo
- Add content length constraints in Renegotiation with fragment length test
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
- Replace last remaining dependency on config.py with query_config
- Replace hard exit with `requires_config_value_at_least` and
`requires_config_value_at_most` to maintain the same effect
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
- Replace calls to config.py for MAX_IN_LEN and MAX_OUT_LEN with
`get_config_value_or_default`
- Remove hard exit when MAX_IN/OUT_LEN < 4096, replace with
`requires_config_value_at_least`
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
Restore the optimization done in
HEAD^{/Speed up the generation of storage format test cases}
which was lost during refactoring made when adding support for
implicit usage flags.
There are still more than one call to the C compiler, but the extra
calls are only for some key usage test cases.
This is an internal refactoring. This commit does not change the
output of generate_psa_tests.py
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In order to for tests to pass from the previous commit (which it mandatory for all pk verify/sign
functions to be given a hash_len that is exactly equal to the message digest length of md_alg) the
hash_len that is supplied to the fucntion cannot be MBEDTLS_MD_MAX_SIZE. This would result in all tests failing. Since the md alg for all of these funtions are SHA256, we can use mbedtls functions to get
the required length of a SHA256 digest (32 bytes). Then that number can be used for allocating the
hash buffer.
Signed-off-by: Nick Child <nick.child@ibm.com>
It is enough only one test case for a key type, algorithm pair when
testing the implicit usage flags.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Add test cases validating that if a stored key only had the hash policy,
then after loading it psa_get_key_attributes reports that it also has the
message policy, and the key can be used with message functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Negative x coordinate was tested with the value -1. It happens to be one
of the low order points both for Curve25519 and Curve448 and might be
rejected because of that and not because it is negative. Make sure that
x < 0 is the only plausible reason for the point to be rejected.
Signed-off-by: Janos Follath <janos.follath@arm.com>
A test case for which the loop would take practically forever if it was
reached. The point would be to validate that the loop is not reached.
The test case should cause the CI to time out if starting with the
current code, ecp_check_pubkey_mx() was changed to call
ecp_check_pubkey_x25519() first and run the mbedtls_mpi_size(() test
afterwards, which would make no semantic difference in terms of memory
contents when the function returns, but would open the way for a DoS.
Signed-off-by: Janos Follath <janos.follath@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Backport 2.x: Fix and test the MBEDTLS_PSA_CRYPTO_SPM build
Straightforward backport from development to developement_2.x plus one trivial commit, only one approval is enough.
Modify tests to test mbedtls_psa_cipher_operation_t,
mbedtls_transparent_test_driver_cipher_operation_t and
mbedtls_opaque_test_driver_cipher_operation_t struct initialization macros.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Tests for psa_cipher_encrypt and psa_cipher_decrypt functions.
The psa_cipher_encrypt function takes no parameter for IV and always generates
it therefore there will be a randomness in the calculation and cannot be
validated by comparing the actual output with the expected output.
The function is tested by:
- doing a prtially randomized test with an encryption then a decryption
and validating the input with output of the decryption
- validating against the multipart encryption
The combination of this two methods provides enough coverage like a
known answer test.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Various functions for PSA hash operations call abort
on failure; test that this is done. The PSA spec does not require
this behaviour, but it makes our implementation more robust in
case the user does not abort the operation as required by the
PSA spec.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Remove late binding of iterators to enable the creation of an object
with an actual state of a variable.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Various functions for PSA cipher and mac operations call abort
on failure; test that this is done. The PSA spec does not require
this behaviour, but it makes our implementation more robust in
case the user does not abort the operation as required by the
PSA spec.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
The cipher_bad_order test happened to pass, but was not testing the
failure case it intended to test.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
