In the PSA crypto library, the code for verification of ECDSA is the same for
both MBEDTLS_PSA_BUILTIN_ALG_ECDSA and
MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA. So, the guards should allow for
either one to enable the code blocks. The original implementation only had
the check for ECDSA. In order to make this work, config_psa.h was updated
to ensure when MBEDTLS_CRYPTO_CONFIG is disabled, the setting for DETERMINISTIC
is only updated if MBEDTLS_ECDSA_C is also enabled.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Ensure that MBEDTLS_ECDSA_C is set when PSA_WANT_ALG_DETERMINISTIC_ECDSA
is requested. Also added MBEDTLS_ECDSA_C to the requirements comment in
config.h for MBEDTLS_ECDSA_DETERMINISTIC.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
When the PSA crypto features need to be setup based on the
PSA_WANT_xxx macros, the dependent features also need to be
enabled. This change corrects that for the MBEDTLS_ECDSA_DETERMINISTIC.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The psa crypto library was generically using PSA_WANT_ALG_xxx, but
should have been using the correct MBEDTLS_PSA_BUILTIN_ALG_xxx
definition since that code is the builtin version. There were also
a couple of spots that needed to ensure the code block was enabled
for either ECDSA or DETERMINISTIC_ECDSA, not just one of them.
Fixed all the new ALG_ECDSA_DETERMINISTIC names to be
ALG_DETERMINISTIC_ECDSA instead.
Fixed test to use correct definitions.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Need to make sure the new MBEDTLS_PSA_ACCEL_XXX defines are not checked
since they should be defined by the PSA driver. Updated the list-macros.sh
script to modify the instances of those found to match the corresponding
MBEDTLS_PSA_BUILTIN_XXX that are defined in config_psa.h
Fixed definition of MBEDTLS_PSA_BUILTIN_ALG_ECDSA_DETERMINISTIC, name was
incorrect. Also fixed a missing space in the comments of crypto_config.h
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Provided more detailed documentation for crypto_config.h file so it
is clear to users can enable cryptographic mechanisms using
PSA_WANT_XXX. If MBEDTLS_PSA_CRYPTO_CONFIG is not set the settings in
this file are not used.
Ensure that defines used in this file are set to 1 and not simply defined
per the specification. Also removed the __cplusplus guards since they are
not needed for this file.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Provied a more detailed description for the config_psa.h header file.
This new description makes it clear that the file should not be edited
by users or integrators. Relevant changes should be made to
psa/crypto_config.h instead.
Fixed the logic for the inclusion of MBEDTLS_PSA_BUILTIN_XXX to be set
when PSA_WANT_ALG_XXX and MBEDTLS_PSA_ACCEL_ALG_XXX is not defined,
otherwise the MBEDTLS_XXX should be set.
Ensure that MBEDTLS_PSA_BUILTIN_XXX is set to 1 and not simply defined
per specification.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Provided detailed description for MBEDTLS_PSA_CRYPTO_CONFIG so that it is
more clear to the user when the feature should be enabled or disabled.
It also mentions where to look for PSA crypto config settings;
include/psa/crypto_config.h. Removed some other related comments that
were not necessary.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
With the new feature MBEDTLS_PSA_CRYPTO_CONFIG, needed to
add support that when the feature is disabled, if there
are defines like MBEDTLS_ECDSA_C defined, then the PSA_WANT_
equivalent define is also enabled. This ensures the guards in
the library psa_crypto will work properly.
Also fixed an error return code in the driver wrapper for cipher
encrypt setup so it will properly pass unit tests.
Ensured config.py full works properly with the new
MBEDTLS_PSA_CRYPTO_CONFIG, it should not be set when the full
option is used.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Originally, MBEDTLS_PSA_CRYPTO_CONFIG was being used to allow
inclusion of mbedlts/config_psa.h, but that needed to be updated
so that mbedtls/config_psa.h is always included and the definitions
specific to PSA configuration are now guarded by
MBEDTLS_PSA_CRYPTO_CONFIG. This will allow for the standard setup
to continue working while new PSA configuration items to also work.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Initial changes to PSA crypto core to support configuration
of ECDSA algorithm using PSA crypto configuration mechanism.
Guards using MBEDTLS_ECDSA_C and MBEDTLS_ECDSA_DETERMINISTIC have
been changed to be based off PSA_WANT_ALG_ECDSA and
PSA_WANT_ALG_ECDSA_DETERMINISTIC. Added new tests to all.sh to
confirm new settings are working properly. Current code does not
pass the tests since built in signature verification is not in place.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In order to test various PSA crypto settings the Requires section
needed updating to require MBEDTLS_PSA_CRYPTO_C or
MBEDTLS_PSA_CRYPTO_CONFIG.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In order to prepare for PSA cryptographic mechanism for conditional
inclusion of various modules, there needs to be some updates to
the mbedtls configuration to enable that feature to work. This initial
set of changes just lays the ground work and future changes will
implement the functional features.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Move key identifier related macros and functions from
crypto_types.h to crypto_values.h as the latter is
the intended file to put them in.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
* Reworked the cipher context once again to be more robustly defined
* Removed redundant memset
* Unified behaviour on failure between driver and software in cipher_finish
* Cipher test driver setup function now also returns early when its status
is overridden, like the other test driver functions
* Removed redundant test cases
* Added bad-order checking to verify the driver doesn't get called where
the spec says it won't.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Once an operation has been 'accepted' by a driver, the remainder is bound
to the same driver, since driver-specific context structs cannot be shared.
This provides a pretty good gate mechanism for the fallback logic, too.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This commit introduces the public macro MBEDTLS_MAX_KEY_LENGTH,
which evaluates to an upper bound for the key lengths of all enabled
ciphers, in Bytes.
This is analogous to the already existing macros MBEDTLS_MAX_IV_LENGTH
and MBEDTLS_MAX_BLOCK_LENGTH, which provide upper bounds for the IV
and block length, respectively.
For now, MBEDTLS_MAX_KEY_LENGTH is 32 Bytes by default, and 64 in case
XTS is enabled. This is a strict overapproximation for some restricted
configurations. Ideally, the upper bound should be calculated exactly
and automatically from the list of enabled ciphers. The same applies
to the existing macros MBEDTLS_MAX_IV_LENGTH and MBEDTLS_MAX_BLOCK_LENGTH,
though, and is left for future work.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Fix PSA code and unit tests for the unit tests
to pass with key identifiers encoding owner
identifiers.
The changes in PSA code just make the enablement
of key identifiers encoding owner identifiers
platform independent. Previous to this commit,
such key identifiers were used only in the case
of PSA SPM platforms.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename psa_key_owner_id_t to mbedtls_key_owner_id_t to
highlight that this is a Mbed TLS specific type and not
a type defined in the PSA Cryptography API specification.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As a volatile key identifier may have a non-zero owner
identifier, don't reset the key owner identifier (if any)
when setting a volatile lifetime for a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define always psa_key_id_t as defined in the PSA
Cryptography API specification independently of
whether the MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration file is set or not.
As a consequence, get rid of `psa_app_key_id_t` that is
not needed anymore.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of this commit and the following is for
psa_key_id_t to always be as defined by the PSA
Cryptography API specification.
Currently psa_key_id_t departs from its specification
definition when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration flag is set. In that configuration, it is set
to be equal to psa_key_file_id_t which in that configuration
encodes an owner identifier along the key identifier.
Type psa_key_file_id_t was meant to be the key identifier type
used throughout the library code. If
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is set it
includes both a key and owner identifier, otherwise it is
equal to psa_key_id_t.
It has not been the key identifier type throughout the
library so far because when the PSA Cryptography
specification was developped the library Doxygen
documentation was used to generate the PSA Cryptography API
specification thus the need to use psa_key_id_t and not
psa_key_file_id_t.
As this constraint does not hold anymore, move
to psa_key_file_id_t as the key identifier type throughout
the library code.
By the way, this commit updates the key identifier
initialization in the tests to be compatible with a
composit key identifier. A psa_key_id_make()
inline function is introduced to initialize key
identifiers (composit ot not) at runtime.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
