The "full" configuration excludes some deprecated or experimental
features. Enable the ones that have tests, don't have extra
requirements and don't turn off some other feature.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The seedfile needs to have the size of the entropy accumulator, which
is 64 bytes (512 bits) since the entropy accumulator uses SHA-512 and
the seed size needs to be the same as the hash output (or larger).
We used to enable MBEDTLS_ENTROPY_FORCE_SHA256 in the full config, so
the entropy accumulator was 256 bits (32 bytes), and therefore a
32-byte seedfile worked. But we no longer turn on this option in the
full config, so the 32-byte seedfile no longer works.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit introduces two changes:
- Add in_msg and out_msg calculations for buffer upsizing. This was previously
considered as unnecessary, but renegotiation using certain ciphersuites needs
this.
- Improving the way out_msg and in_msg pointers are calculated, so that even
if no resizing is introduced, the pointers remain the same;
New tests added:
- various renegotiation schemes with a range of MFL's and ciphersuites;
- an ssl-opt.sh test exercising two things that were problematic: renegotiation
with TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 and a server MFL that's smaller
than the one negotiated by the client.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Since the server might want to have a different maximum fragment length
for the outgoing messages than the negotiated one - introduce a new way of
computing it. This commit also adds additional ssl-opt.sh tests ensuring
that the maximum fragment lengths are set as expected.
mbedtls_ssl_get_max_frag_len() is now a deprecated function,
being an alias to mbedtls_ssl_get_output_max_frag_len(). The behaviour
of this function is the same as before.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Fix an intermittent crash when running test suites in non-verbose
mode (i.e. with -v off) and with the outcome file enabled. The
array unmet_dependencies was only filled in verbose mode, but was used
in write_outcome_result regardless.
Since unmet_dependencies only ever contains strings that are integers
written out in decimal, store the integer instead. Do this
unconditionally since it doesn't cost any extra memory.
It would be better to record the dependency names, both in the verbose
output and in the outcome file. But the dependency names are not
currently available at runtime.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There are currently 4 tests in ssl-opt.sh with either -C "resend" or -S
"resend", that is, asserting that no retransmission will occur. They sometimes
fail on loaded CI machines as one side doesn't send a message fast enough,
causing the other side to retransmit, causing the test to fail.
(For the "reconnect" test there was an other issue causing random failures,
fixed in a previous commit, but even after that fix the test would still
sometimes randomly fail, even if much more rarely.)
While it's a hard problem to fix in a general and perfect way, in practice the
probability of failures can be drastically reduced by making the timeout
values much larger.
For some tests, where retransmissions are actually expected, this would have
the negative effect of increasing the average running time of the test, as
each side would wait for longer before it starts retransmission, so we have a
trade-off between average running time and probability of spurious failures.
But for tests where retransmission is not expected, there is no such trade-off
as the expected running time of the test (assuming the code is correct most of
the time) is not impacted by the timeout value. So the only negative effect of
increasing the timeout value is on the worst-case running time on the test,
which is much less important, as test should only fail quite rarely.
This commit addresses the easy case of tests that don't expect retransmission
by increasing the value of their timeout range to 10s-20s. This value
corresponds to the value used for tests that assert `-S "autoreduction"` which
are in the same case and where the current value seems acceptable so far.
It also represents an increase, compared to the values before this commit, of
a factor 20 for the "reconnect" tests which were frequently observed to fail
in the CI, and of a factor 10 for the first two "DTLS proxy" tests, which were
observed to fail much less frequently, so hopefully the new values are enough
to reduce the probability of spurious failures to an acceptable level.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The server must check client reachability (we chose to do that by checking a
cookie) before destroying the existing association (RFC 6347 section 4.2.8).
Let's make sure we do, by having a proxy-in-the-middle inject a ClientHello -
the server should notice, but not destroy the connection.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Conflicts:
* .github/issue_template.md, .github/pull_request_template.md:
The changes in Mbed Crypto are not relevant to Mbed TLS. Keep the
mbedtls versions.
- "Default" should only be used for tests that actually use the defaults (ie,
not passing options on the command line, except maybe debug/dtls)
- All tests in the "Encrypt then MAC" group should start with that string as a
common prefix
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
Add dependencies on !MBEDTLS_SHA512_NO_SHA384 to X.509 and SSL unit
tests that use SHA-384 (identified based on having a description that
contains "SHA384" or "SHA-384").
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
Look for any other invocation of test scripts that was removed: look for a change that removes a line (`^-.*…`) containing one of the names of a test script (without its path because it may be used with a relative path). Look for `ssl-opt.sh` and `compat.sh`, as well any file in `tests/scripts` that only exists in tls.
```
git diff 'HEAD^{/^Merge}~1' HEAD --diff-filter=M -- . ':!library/error.c' ':!library/version_features.c' ':!programs/test/query_config.c' ':!visualc' ':!*.pdf' ':!*.der' | grep -E "^-.*($(comm -23 <(git ls-tree -r --name-only 'HEAD^{/^Merge}~1') <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development 'HEAD^{/^Merge}^2')) | sed -n 's!^tests/scripts/!!p' | sed 's/\./\\./g' | tr '\n' '|')ssl-opt\.sh|compat\.sh)" | grep -v '^---'
```
This only turns up changes in `basic-in-docker.sh`.
The merge of mbed-crypto removed some tls coverage. Restore it. Also
remove references to the `crypto` subdirectory brought by the mbedtls
side of the merge. In more detail:
* `tests/scripts/all.sh`:
* `fuzz` in comments (×2): restore it.
* `CTEST_OUTPUT_ON_FAILURE=1`: don't remove it.
* `cd crypto` for `make clean`: don't restore it.
* `cleanup`: do restore `programs/fuzz/Makefile`. Don't go into `crypto`. Keep only one copy of the calls to `rm` in `cmake_subproject`.
* Comment legacy options: don't remove it.
* `crypto/Makefile` and `pre_check_seedfile`: don't restore either. See below regarding the lack of need for `pre_check_seedfile`.
* blank line in `pre_print_configuration`: restore it.
* blank line before `#### Build and test`: restore it.
* SSL tests in `component_test_full_cmake_gcc_asan` and zlib components: restore it.
* `component_test_no_pem_no_fs` (×2): the merge placed two copies in different locations. Reconcile them: unset PSA storage like in crypto, and call `ssl-opt.sh` like in tls. Put the merged version at the tls location.
* `component_test_everest`: do add it at the tls location.
* `component_test_small_mbedtls_ssl_dtls_max_buffering`: restore the tls value.
* `component_test_new_ecdh_context`…: move `component_test_new_ecdh_context` before `component_test_everest` and add a calls to `compat.sh` and `ssl-opt.sh` like in `component_test_everest`. Remove the redundant crypto-only `component_test_everest`. Don't remove `component_test_psa_collect_statuses`.
* `component_test_full_cmake_clang`: don't remove `clang` in the `msg` call. Don't remove the call to `test_psa_constant_names.py`.
* `component_test_full_make_gcc_o0`: remove it. It's subsumed by `component_test_gcc_opt`.
* `component_build_deprecated`: don't remove anything.
* `component_test_memory_buffer_allocator`: restore `ssl-opt.sh`.
* `component_test_when_no_ciphersuites_have_mac`: restore it.
* `component_test_platform_calloc_macro`: don't restore `unset MBEDTLS_MEMORY_BUFFER_ALLOC_C` which is now redundant. Don't restore explicit flags instead of `$ASAN_CFLAGS`.
* `component_test_aes_fewer_tables`…: don't remove it.
* `component_test_m32_o1`: restore SSL testing.
* `component_test_m32_everest`: restore SSL testing.
* `component_test_min_mpi_window_size`…: don't remove it.
* `component_test_valgrind`: do restore the tls version of the comment.
* `run_component`: don't remove the seedfile creation. This is better than `pre_check_seedfile` (see below).
* `pre_check_seedfile`: don't restore it. `pre_check_seedfile` (from tls) creates a seedfile once and for all. This is not good enough if a component fails in such a way as to leave a broken seedfile, or if a component leaves a seedfile with a size that's wrong for the next component to run. Instead (from crypto), `run_component` creates a sufficiently large seedfile before each component.
Merge `unremove-non-crypto` into `mbedtls/development`. The branch
`unremove-non-crypto` was obtained by starting from `mbed-crypto/development`,
then reverting many commits that removed X.509 and TLS functionality when Mbed
Crypto forked from Mbed TLS (the “unremoval”), then make a few tweaks to
facilitate the merge.
The unremoval step restored old versions of some tls files. If a file doesn't
exist in mbed-crypto, check out the mbedtls version, regardless of what
happened during the unremoval of tls files in the crypto tree. Also
unconditionally take the mbedtls version of a few files where the
modifications are completely project-specific and are not relevant in
mbed-crypto:
* `.github/issue_template.md`: completely different. We may want to reconcile
them independently as a follow-up.
* `.travis.yml`: would only be reverted to an earlier tls version.
* `README.md`: completely different. We may want to reconcile them
independently as a follow-up.
* `doxygen/input/doc_mainpage.h`: the changes in crypto were minimal and not
relevant except as a stopgap as mbed-crypto did not have its own product
versioning in the Doxygen documentation.
* `tests/.jenkins/Jenkinsfile`: completely different.
* `tests/data_files/Makefile`: there were no changes in mbed-crypto,
but the unremoval step restored an old version.
Shell script for everything to do after the merge apart from the conflict
resolution:
```
tls_files=($(comm -23 <(git ls-tree -r --name-only HEAD) <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development MERGE_HEAD))))
tls_files+=($tls_files .github/issue_template.md .travis.yml README.md doxygen/input/doc_mainpage.h tests/.jenkins/Jenkinsfile tests/data_files/Makefile)
git checkout --theirs HEAD -- $tls_files
git add -- $tls_files
```
Resolve the remaining conflicts:
* `library/CMakeLists.txt`:
* Keep the TLS definition of `src_crypto`
* `USE_SHARED_MBEDTLS_LIBRARY`: keep all three libraries, with both
`include` and `crypto/include` in `target_include_directories`, all with
version `2.21.0`.
* `programs/Makefile`:
* Reconcile the APPS lists (add/add from a differently-formatted common
ancestor): insert the `psa/*` from crypto into the tls list.
* Keep the `fuzz` target defined only in tls version.
* Keep the recipe (only in tls version) cleaning `ssl_pthread_server`
stuff for the `clean` target.
* `scripts/config.py`:
* `include_in_full`: add/add conflict. Keep both.
* `tests/scripts/all.sh`:
* `component_test_no_use_psa_crypto_full_cmake_asan`: partially old
version in crypto. Take the tls version.
* `component_test_malloc_0_null` and more: take
`component_test_malloc_0_null` from crypto (with `config.py` rather than
`config.pl`, and with `$ASAN_FLAGS` rather than an explicit list), but
add the call to `ssl-opt.sh` from tls. Take the other components from
crypto.
With this commit, building and running the unit tests with both `make ` and
`cmake` work in the default configuration on Linux. Other platforms, build
systems and configurations are likely not to work, and there is some
regression in test coverage.
There is some loss of functionality because the unremoval step restored older
versions of tls content. This commit contains the latest tls version of
tls-only files, but some changes from the tls side in files that existed on
both sides have regressed. Most problematic changes are hunks that remove some
tls-specific feature and contain either a C preprocessor symbol identifying a
tls-specific module or option, or the name of a tls-specific file. Hunks
that remove a tls-specific preprocessor symbol can be identified with the
regular expression `^-.*MBEDTLS_(ERR_)?(PKCS11|X509|NET|SSL)_`.
Subsequent commits will revert a few parts of the patch from this merge commit
in order to restore the tls functionality that it removes, ensure that the
test coverage includes what was covered in either branch, and fix test
failures.
This reverts commit 9b90f2e294.
Conflicts:
* tests/scripts/all.sh: do the same changes, dancing around the new
outcome file feature and components added in the same places.
Make sure that the components that are getting added back are at the
same locations as where they are now in mbedtls.
This reverts commit 9afb2e9921.
Conflicts:
* include/CMakeLists.txt
* "Make config.h available" comment: there has been a change
adjacent to where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* compat.sh: there has been a change immediately before where it was
removed. Just re-add what was removed.
This reverts commit 120d571e8e.
Conflicts:
* tests/CMakeLists.txt:
* target_include_directories: the instruction whose addition is to
be reverted has changed. Remove what is there now.
This reverts commit b478bb6ddb.
Conflicts:
* tests/CMakeLists.txt: revert the introduction of exe_name, but keep
the addition of ${CMAKE_SOURCE_DIR}/crypto/library/ to
target_include_directories.
This reverts commit d832f187f7.
Conflicts:
* CMakeLists.txt:
* USE_PKCS11_HELPER_LIBRARY: there has been a change immediately before
where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* USE_PKCS11_HELPER_LIBRARY: there has been a change immediately before
where it was removed. Just re-add what was removed.
This reverts commit d874a1fd14.
Conflicts:
* CMakeLists.txt:
* ENABLE_ZLIB_SUPPORT: there has been a change immediately after
where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* ENABLE_ZLIB_SUPPORT: there has been a change immediately after
where it was removed. Just re-add what was removed.
This reverts commit 8298d70bee.
Conflicts:
* library/Makefile: removal of SOEXT_X509 and SOEXT_TLS vs change of
value of SOEXT_CRYPTO. Keep all, with the new value of SOEXT_CRYPTO.
This reverts commit 1ad37309e4.
Conflicts:
* tests/scripts/test-ref-configs.pl:
* config-ccm-psk-tls1_2.h: there has been an addition of
"config-symmetric-only.h" at the place where the configurations
that are added back were removed. Keep this configuration.
This reverts commit 1c66e48670.
Conflicts:
* include/mbedtls/check_config.h:
* MBEDTLS_SSL_PROTO_SSL3: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed. Re-add it
after (alphabetical order).
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* include/mbedtls/config.h:
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* library/version_features.c: re-generate by running
scripts/generate_features.pl.
* programs/test/query_config.c: re-generate by running
scripts/generate_query_config.pl.
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
* Revert removing one symbol (MBEDTLS_NET_C) from the list of symbols
to exclude from baremetal.
* scripts/footprint.sh:
* Re-add the line to unset MBEDTLS_NET_C, but with config.py instead of
config.pl.
* tests/scripts/all.sh:
* component_test_no_platform: re-add the line to unset MBEDTLS_NET_C, but
with config.py instead of config.pl.
* component_build_arm_none_eabi_gcc,
component_build_arm_none_eabi_gcc_no_udbl_division,
component_build_arm_none_eabi_gcc_no_64bit_multiplication,
component_build_armcc: these components now use the baremetal
configuration, so they do not need to turn off MBEDTLS_NET_C explicitly.
This reverts commit bb1f701212.
* include/mbedtls/check_config.h:
* MBEDTLS_X509_RSASSA_PSS_SUPPORT: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed.
Re-add it before MBEDTLS_SHA512_NO_SHA384 to keep it grouped
with MBEDTLS_RSA_C.
Conflicts:
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
Pylint when installed as a distro package can be installed as pylint3, whilst as
a PEP egg, it can be installed as pylint.
This commit changes the scripts to first use pylint if installed, and optionally
look for pylint3 if not installed. This is to allow a preference for the PEP
version over the distro version, assuming the PEP one is more likely to be
the correct one.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Counting of the fragments has been shifted from the writing section to
the reading. This is more reliable because one reading is made for one
fragment and during one write the library can internally divide data
into two fragments
Signed-off-by: Piotr Nowicki <piotr.nowicki@arm.com>
