To test c <= high, instead of testing the sign of (high + 1) - c, negate the
sign of high - c (as we're doing for c - low). This is a little easier to
read and shaves 2 instructions off the arm thumb build with
arm-none-eabi-gcc 7.3.1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
n was used for two different purposes. Give it a different name the second
time. This does not seem to change the generated code when compiling with
optimization for size or performance.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of doing constant-flow table lookup, which requires 64 memory loads
for each lookup into a 64-entry table, do a range-based calculation, which
requires more CPU instructions per range but there are only 5 ranges.
I expect a significant performance gain (although smaller than for decoding
since the encoding table is half the size), but I haven't measured. Code
size is slightly smaller.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Document what each local variable does when it isn't obvious from the name.
Don't reuse a variable for different purposes.
This commit has very little impact on the generated code (same code size on
a sample Thumb build), although it does fix a theoretical bug that 2^32
spaces inside a line would be ignored instead of treated as an error.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of doing constant-flow table lookup, which requires 128 memory loads
for each lookup into a 128-entry table, do a range-based calculation, which
requires more CPU instructions per range but there are only 5 ranges.
Experimentally, this is ~12x faster on my PC (based on
programs/x509/load_roots). The code is slightly smaller, too.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Base64 decoding uses equality comparison tests for characters that don't
leak information about the content of the data other than its length, such
as whitespace. Do this with '=' as well, since it only reveals information
about the length. This way the table lookup can focus on character validity
and decoding value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This macro is introduced here for use in deprecated functions. It may also
be useful in user code, so it is in a public header.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
This parameter was set but not used, which was pointless. Clang 14 detects
this and legitimately complains.
Remove the parameter. This is an internal function, only called once. The
caller already has a sufficient check on the output buffer size which
applies in more cases, so there is no real gain in robustness in adding the
same check inside the internal function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Warning reported with IAR compiler:
"mbedtls\library\pkparse.c",1167 Warning[Pe550]: variable "ret" was set but never used
Signed-off-by: Kenneth Soerensen <knnthsrnsn@gmail.com>
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
After removing config.h, the inclusion of it in common.h would be too late
in the code. Therefore common.h has been moved to where config.h used to
be included.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
common.h already includes config.h, so a a file uses common.h
it no longer requires the definition/inclusion of config.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
added more uses of byte reading macros where appropriate.
changed the positioning of some brackets for consitancy in
coding style
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
MBEDTLS_ALLOW_PRIVATE_ACCESS existed in development and was copied
over whilst cherry-picking commits.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The previous commits cherry picked from the changes made with relation
to the development branch. This commit makes the appropriate chnages to
the files not present in the development branch.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
minor changes, such as improving the documentation for the byte reading
macros, and using MBEDTLS_PUT_UINT16_xy in place of byte reading
macro combinations
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Replace the contents of MBEDTLS_PUT_UINTx_yz contained inconsitent
but similar/duplicate code to the MBEDTLS_BYTE_x macros. Therefore
the contents of the macros now utilise the byte reading macros.
MBEDTLS_PUT_UINT64_LE's written order was also not consitent with
the other PUT macros, so that was modified.
Documentation comment said LSB instead of MSB and that has also been
resolved.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
byte shifting opertations throughout library/ were only replaced with
the byte reading macros when an 0xff mask was being used.
The byte reading macros are now more widley used, however they have not
been used in all cases of a byte shift operation, as it detracted from
the immediate readability or otherwise did not seem appropriate.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Copy over the GET/PUT_UINT64_LE/BE macros from aes.c and sha512.c
Add the MBEDTLS_ prefix to all 4 macros.
Modify the GET_UINT64 macros to no longer take a target variable
as a parameter, so when the macro function is called it must be
assigned to a variable in the same statement.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The CHAR macros casted to an unsigned char which in this project
is garunteed to be 8 bits - the same as uint8_t (which BYTE casts
to) therefore, instances of CHAR have been swapped with BYTE and
the number of macros have been cut down
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
