* crypto/development: (77 commits)
all.sh: disable MEMORY_BUFFER_ALLOC in cmake asan build
Unify gcc and clang cmake flags to test with UBsan
Add an input check in psa_its_set
Remove storage errors from psa_generate_random
Update getting_started.md
Update based on Jaeden's comments.
Update getting_started.md
Fix return code warnings
Update getting_started.md
Fix warnings
Add PSA_ERROR_STORAGE_FAILURE to psa_cipher_generate_iv
Remove errorneous insert
Add STORAGE_FAILURE everywhere + add missing codes
Add storage failure to psa_mac_verify_finish
Add storage failure to psa_mac_sign_finish
Add PSA_ERROR_STORAGE_FAILURE to psa_aead_*_setup functions
Added PSA_ERROR_BAD_STATE to functions with operations
Added extra bad state case to psa_hash_setup
Add missing return codes to psa_generate_key
Add PSA_ERROR_BUFFER_TOO_SMALL to psa_mac_compute
...
Alternative implementations are often hardware accelerators and might
not need an RNG for blinding. But if they do, then we make them misuse
the RNG in the deterministic case.
There are several way around this:
- Exposing a lower level function for replacement. This would be the
optimal solution, but litters the API and is not backward compatible.
- Introducing a new compile time option for replacing the deterministic
function. This would mostly cover the same code as
MBEDTLS_ECDSA_DETERMINISTIC and would be yet another compile time flag.
- Reusing the existing MBEDTLS_ECDSA_DETERMINISTIC macro. This changes
the algorithm used by the PK layer from deterministic to randomised if
the alternative implementation is present.
This commit implements the third option. This is a temporary solution
and should be fixed at the next device driver API change.
The current interface does not allow passing an RNG, which is needed for
blinding. Using the scheme's internal HMAC-DRBG results the same
blinding values for the same key and message, diminishing the
effectiveness of the countermeasure. A new function
`mbedtls_ecdsa_det_ext` is available to address this problem.
`mbedtls_ecdsa_sign_det` reuses the internal HMAC-DRBG instance to
implement blinding. The advantage of this is that the algorithm is
deterministic too, not just the resulting signature. The drawback is
that the blinding is always the same for the same key and message.
This diminishes the efficiency of blinding and leaks information about
the private key.
A function that takes external randomness fixes this weakness.
* open output distinct key handles
* each handle must be closed
* destroying a key does not invalidate other handles
* closing a key can/might fail an active operation (but not required)
It may be possible that the implementation runs out of
memory when exporting a key from storage or a secure
element. For example, it may not be possible to directly
move the data from storage to the caller, so the implementation
will have to buffer the material temporarily (an issue if dynamic
memory allocation scheme is used). For a large key
this is more likely to return.
It may be possible that an implementation does not
fetch key material until a command like
this is called and such an error may occur if an
off-chip secure storage dependency may have been wiped.
Note that PSA_ERROR_NOT_PERMITTED is not included
because I can't think of a scenario where you have
a valid key handle but aren't allowed to read the
attributes
If the key doesn't exist by the time this call is made
then the handle is invalid,
which means that PSA_ERROR_INVALID_HANDLE should be
returned rather than "does not exist"
It may be possible that the implementation runs out of
memory when exporting a key from storage or a secure
element. For example, it may not be possible to directly
move the data from storage to the caller, so the implementation
will have to buffer the material temporarily (an issue if dynamic
memory allocation scheme is used). For a large key
this is more likely to return.
It may be possible that an implementation does not
fetch key material until a command like
this is called and such an error may occur if an
off-chip secure storage dependency may have been wiped.
Note that PSA_ERROR_NOT_PERMITTED is not included
because I can't think of a scenario where you have
a valid key handle but aren't allowed to read the
attributes
* origin/development:
Fix uninitialized variable in x509_crt
Add a ChangeLog entry for mbedtls_net_close()
Added mbedtls_net_close and use it in ssl_fork_server to correctly disassociate the client socket from the parent process and the server socket from the child process.
Add ChangeLog entry
fix memory leak in mpi_miller_rabin()
* origin/pr/2803:
Add a ChangeLog entry for mbedtls_net_close()
Added mbedtls_net_close and use it in ssl_fork_server to correctly disassociate the client socket from the parent process and the server socket from the child process.
x0-x3 are skipped such that function parameters to not have to be moved.
MULADDC_INIT and MULADDC_STOP are mostly empty because it is more
efficient to keep everything in registers (and that should easily be
possible). I considered a MULADDC_HUIT implementation, but could not
think of something that would be more efficient than basically 8
consecutive MULADDC_CORE. You could combine the loads and stores, but
it's probably more efficient to interleave them with arithmetic,
depending on the specific microarchitecture. NEON allows to do a
64x64->128 bit multiplication (and optional accumulation) in one
instruction, but is not great at handling carries.
* origin/development: (42 commits)
Handle deleting non-existant files on Windows
Update submodule
Use 3rdparty headers from the submodule
Add Everest components to all.sh
3rdparty: Add config checks for Everest
Fix macros in benchmark.c
Update generated files
3rdparty: Fix inclusion order of CMakeLists.txt
Fix trailing whitespace
ECDH: Fix inclusion of platform.h for proper use of MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED
ECDH: Fix use of ECDH API in full handshake benchmark
ECDH: Removed unnecessary calls to mbedtls_ecp_group_load in ECDH benchmark
ECDH: Fix Everest x25519 make_public
Fix file permissions
3rdparty: Rename THIRDPARTY_OBJECTS
3rdparty: Update description of MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
3rdparty: Fix Makefile coding conventions
ECDSA: Refactor return value checks for mbedtls_ecdsa_can_do
Add a changelog entry for Everest ECDH (X25519)
Document that curve lists can include partially-supported curves
...
Manually edit ChangeLog to ensure correct placement of ChangeLog notes.
* origin/pr/2799: (42 commits)
Handle deleting non-existant files on Windows
Update submodule
Use 3rdparty headers from the submodule
Add Everest components to all.sh
3rdparty: Add config checks for Everest
Fix macros in benchmark.c
Update generated files
3rdparty: Fix inclusion order of CMakeLists.txt
Fix trailing whitespace
ECDH: Fix inclusion of platform.h for proper use of MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED
ECDH: Fix use of ECDH API in full handshake benchmark
ECDH: Removed unnecessary calls to mbedtls_ecp_group_load in ECDH benchmark
ECDH: Fix Everest x25519 make_public
Fix file permissions
3rdparty: Rename THIRDPARTY_OBJECTS
3rdparty: Update description of MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
3rdparty: Fix Makefile coding conventions
ECDSA: Refactor return value checks for mbedtls_ecdsa_can_do
Add a changelog entry for Everest ECDH (X25519)
Document that curve lists can include partially-supported curves
...
* origin/development:
Update the crypto submodule
Use multipart PSA key derivation API
platform: Include stdarg.h where needed
Update Mbed Crypto to contain mbed-crypto#152
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
ChangeLog: Enable builds as a CMake subproject
Remove use of CMAKE_SOURCE_DIR
Update library version to 2.18.0
Avoid compiler errors when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
is set by using the application ID type.
[Error] psa_crypto_slot_management.c@175,9: used type 'psa_key_id_t' (aka 'psa_key_file_id_t') where arithmetic or pointer type is required
A macro useful for initializing psa_key_id_t, whether
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is set or not. Without this
macro, it is necessary to know if
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER as with it the key ID is
non-scalar and needs to be initialized with {0, 0}, and 0 otherwise when
key ID is scalar.
Bring Mbed TLS 2.18.0 and 2.18.1 release changes back into the
development branch. We had branched to release 2.18.0 and 2.18.1 in
order to allow those releases to go out without having to block work on
the `development` branch.
Manually resolve conflicts in the Changelog by moving all freshly addded
changes to a new, unreleased version entry.
Reject changes to include/mbedtls/platform.h made in the mbedtls-2.18
branch, as that file is now sourced from Mbed Crypto.
* mbedtls-2.18:
platform: Include stdarg.h where needed
Update Mbed Crypto to contain mbed-crypto#152
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
ChangeLog: Enable builds as a CMake subproject
Remove use of CMAKE_SOURCE_DIR
Update library version to 2.18.0
* origin/development: (114 commits)
Don't redefine calloc and free
Add changelog entry to record checking
Fix compiler warning
Add debug messages
Remove duplicate entries from ChangeLog
Fix parameter name in doxygen
Add missing guards for mac usage
Improve reability and debugability of large if
Fix a typo in a comment
Fix MSVC warning
Fix compile error in reduced configurations
Avoid duplication of session format header
Implement config-checking header to context s11n
Provide serialisation API only if it's enabled
Fix compiler warning: comparing signed to unsigned
Actually reset the context on save as advertised
Re-use buffer allocated by handshake_init()
Enable serialisation tests in ssl-opt.sh
Change requirements for setting timer callback
Add setting of forced fields when deserializing
...
The code wants timer callbacks to be set (checked in fetch_input()), and can't
easily check whether we're using nbio, so it seems easier to require the
callbacks to be always set rather than only with nbio as was previously done.
The number of meaning of the flags will be determined later, when handling the
relevant struct members. For now three bytes are reserved as an example, but
this number may change later.
Enforce restrictions indicated in the documentation.
This allows to make some simplifying assumptions (no need to worry about
saving IVs for CBC in TLS < 1.1, nor about saving handshake data) and
guarantees that all values marked as "forced" in the design document have the
intended values and can be skipped when serialising.
Some of the "forced" values are not checked because their value is a
consequence of other checks (for example, session_negotiated == NULL outside
handshakes). We do however check that session and transform are not NULL (even
if that's also a consequence of the initial handshake being over) as we're
going to dereference them and static analyzers may appreciate the info.
This is enabled by default as we generally enable things by default unless
there's a reason not to (experimental, deprecated, security risk).
We need a compile-time option because, even though the functions themselves
can be easily garbage-collected by the linker, implementing them will require
saving 64 bytes of Client/ServerHello.random values after the handshake, that
would otherwise not be needed, and people who don't need this feature
shouldn't have to pay the price of increased RAM usage.
This commit introduces a new SSL error code
`MBEDTLS_ERR_SSL_VERSION_MISMATCH`
which can be used to indicate operation failure due to a
mismatch of version or configuration.
It is put to use in the implementation of `mbedtls_ssl_session_load()`
to signal the attempt to de-serialize a session which has been serialized
in a build of Mbed TLS using a different version or configuration.
We have explicit recommendations to use US spelling for technical writing, so
let's apply this to code as well for uniformity. (My fingers tend to prefer UK
spelling, so this needs to be fixed in many places.)
sed -i 's/\([Ss]eriali\)s/\1z/g' **/*.[ch] **/*.function **/*.data ChangeLog
This allows callers to discover what an appropriate size is. Otherwise they'd
have to either try repeatedly, or allocate an overly large buffer (or some
combination of those).
Adapt documentation an example usage in ssl_client2.
Avoid useless copy with mbedtls_ssl_get_session() before serialising.
Used in ssl_client2 for testing and demonstrating usage, but unfortunately
that means mbedtls_ssl_get_session() is no longer tested, which will be fixed
in the next commit.
The next commit with make the implementation publicly available as well.
For now the API is kept unchanged. The save function API has a serious drawback in that the user
must guess what an appropriate buffer size is.
Internally so far this didn't matter because we were only using that API for
ticket creation, and tickets are written to the SSL output buffer whose size
is fixed anyway, but for external users this might not be suitable. Improving
that is left for later.
Also, so far the functions are defined unconditionally. Whether we want to
re-use existing flags or introduce a new one is left for later.
Finally, currently suggested usage of calling get_session() then
session_save() is memory-inefficient in that get_session() already makes a
copy. I don't want to recommend accessing `ssl->session` directly as we want
to prohibit direct access to struct member in the future. Providing a clean
and efficient way is also left to a later commit.
* origin/development: (51 commits)
Fix possibly-lossy conversion warning from MSVC
Reintroduce length 0 check for records
Don't use memcpy() for 2-byte copy operation
Remove integer parsing macro
Fix alignment in record header parsing routine
Don't disallow 'record from another epoch' log msg in proxy ref test
Make sure 'record from another epoch' is displayed for next epoch
Implement record checking API
Mark ssl_parse_record_header() as `const` in SSL context
Make mbedtls_ssl_in_hdr_len() CID-unaware
Remove duplicate setting of ssl->in_msgtype and ssl->in_msglen
Move update of in_xxx fields in ssl_get_next_record()
Move update of in_xxx fields outside of ssl_prepare_record_content()
Reduce dependency of ssl_prepare_record_content() on in_xxx fields
Move ssl_update_in_pointers() to after record hdr parsing
Mark DTLS replay check as `const` on the SSL context
Move updating the internal rec ptrs to outside of rec hdr parsing
Mark ssl_decrypt_buf() as `const in the input SSL context
Adapt ssl_prepare_record_content() to use SSL record structure
Use record length from record structure when fetching content in TLS
...
Adjust the wording to permit multiple handles to a single key - closing
a handle does not necessarily release volatile memory associated with
the key, that only occurs when the last handle is closed.
- Describe the implementation defined behavior for opening multiple
keys, and provide a reference to the relevant section.
- Describe the use of INSUFFICENT_MEMORY error to indicate additional
implementation resource constaints.
- Clarify the distinction between DOES_NOT_EXIST and INVALID_HANDLE
error conditions.
* origin/pr/2790: (40 commits)
Fix possibly-lossy conversion warning from MSVC
Reintroduce length 0 check for records
Don't use memcpy() for 2-byte copy operation
Remove integer parsing macro
Fix alignment in record header parsing routine
Don't disallow 'record from another epoch' log msg in proxy ref test
Make sure 'record from another epoch' is displayed for next epoch
Implement record checking API
Mark ssl_parse_record_header() as `const` in SSL context
Make mbedtls_ssl_in_hdr_len() CID-unaware
Remove duplicate setting of ssl->in_msgtype and ssl->in_msglen
Move update of in_xxx fields in ssl_get_next_record()
Move update of in_xxx fields outside of ssl_prepare_record_content()
Reduce dependency of ssl_prepare_record_content() on in_xxx fields
Move ssl_update_in_pointers() to after record hdr parsing
Mark DTLS replay check as `const` on the SSL context
Move updating the internal rec ptrs to outside of rec hdr parsing
Mark ssl_decrypt_buf() as `const in the input SSL context
Adapt ssl_prepare_record_content() to use SSL record structure
Use record length from record structure when fetching content in TLS
...
* origin/pr/2781:
Documentation fixes according to review
Remove unused label in ssl_client2/ssl_server2
Add missing word in documentation of mbedtls_ssl_check_record()
cli/srv ex: Add dbg msg if record checking gives inconsistent result
Fix minor issues in documentation of mbedtls_ssl_check_record()
State that record checking is DTLS only and doesn't check content type
Update version_features.c
Pass dgrams to mbedtls_ssl_check_record in ssl_client2/server2
Add IO wrappers to ssl_server2 as interm's between NET and SSL layer
Add IO wrappers to ssl_client2 as interm's between NET and SSL layer
Introduce configuration option and API for SSL record checking
Avoid an error with differing linkages being expressed for
psa_set_key_domain_parameters() between crypto_extra.h and
crypto_struct.h in C++ builds.
[Error] crypto_extra.h@456,14: conflicting declaration of 'psa_status_t psa_set_key_domain_parameters(psa_key_attributes_t*, psa_key_type_t, const uint8_t *, size_t)' with 'C' linkage
Document that a curve returned by mbedtls_ecp_curve_list() or
mbedtls_ecp_grp_id_list() may lack support for ECDH or ECDSA.
Add a corresponding changelog entry, under "API Changes" because we
have changed the behavior: formerly, these functions skipped ECDH-only
curves, although this was not documented.
* crypto/pr/212: (337 commits)
Make TODO comments consistent
Fix PSA tests
Fix psa_generate_random for >1024 bytes
Add tests to generate more random than MBEDTLS_CTR_DRBG_MAX_REQUEST
Fix double free in psa_generate_key when psa_generate_random fails
Fix copypasta in test data
Avoid a lowercase letter in a macro name
Correct some comments
Fix PSA init/deinit in mbedtls_xxx tests when using PSA
Make psa_calculate_key_bits return psa_key_bits_t
Adjust secure element code to the new ITS interface
More refactoring: consolidate attribute validation
Fix policy validity check on key creation.
Add test function for import with a bad policy
Test key creation with an invalid type (0 and nonzero)
Remove "allocated" flag from key slots
Take advantage of psa_core_key_attributes_t internally #2
Store the key size in the slot in memory
Take advantage of psa_core_key_attributes_t internally: key loading
Switch storage functions over to psa_core_key_attributes_t
...
* development:
Update crypto to a repo with latest crypto
Update Mbed Crypto
tls: Remove duplicate psa_util.h include
Remove unused cryptography test files
Remove crypto C files
Remove files sourced from Mbed Crypto
config: Fix Doxygen link to MBEDTLS_PARAM_FAILED
Use mbedtls-based path for includes
check-names: Consider crypto-sourced header files
Resolve conflicts by performing the following actions:
- Reject changes to ChangeLog, as Mbed Crypto doesn't have one
- Reject changes to tests/compat.sh, as Mbed Crypto doesn't have it
- Reject changes to programs/fuzz/onefile.c, as Mbed Crypto doesn't have
it
- Resolve minor whitespace differences in library/ecdsa.c by taking the
version from Mbed TLS upstream.
* origin/development:
Honor MBEDTLS_CONFIG_FILE in fuzz tests
Test that a shared library build produces a dynamically linked executable
Test that the shared library build with CMake works
Add a test of MBEDTLS_CONFIG_FILE
Exclude DTLS 1.2 only with older OpenSSL
Document the rationale for the armel build
Switch armel build to -Os
Add a build on ARMv5TE in ARM mode
Add changelog entry for ARM assembly fix
bn_mul.h: require at least ARMv6 to enable the ARM DSP code
Adapt ChangeLog
ECP restart: Don't calculate address of sub ctx if ctx is NULL
Remove cryptography related files and a few utility header files that
are shared between Mbed TLS and Mbed Crypto. Mbed TLS will use an Mbed
Crypto sourced version of each of these header files in order to ease
the maintenance burden of both libraries, and to make it easier to keep
Mbed TLS and Mbed Crypto in sync.
As part of removing cryptography related files, tell Doxygen to source
information from the removed the headers, so that it will consider them
for inclusion within Doxygen output.
Later, as part of the Mbed TLS 3.0 (API breaking version), we'll
restructure the organization of the 3 libraries a bit, to move some
things out of Mbed Crypto that don't belong there.
Candidates of not belonging in Mbed Crypto, but are in libmbedcrypto.so
for legacy reasons:
- asn1.h
- asn1write.h
- base64.h
- memory_buffer_alloc.h
- platform.h
- platform_time.h
- platform_util.h
- threading.h
- timing.h
- version.h
To help the build system find the correct include files, paths starting
with "mbedtls/" or "psa/" must be used. Otherwise, you can run into
build failures like the following when building Mbed Crypto as a
submodule.
In file included from chachapoly.c:31:0:
../../include/mbedtls/chachapoly.h:43:10: fatal error: poly1305.h: No such file or directory
#include "poly1305.h"
^~~~~~~~~~~~
compilation terminated.
The function mbedtls_ssl_in_hdr_len() is supposed to return the length
of the record header of the current incoming record. With the advent
of the DTLS Connection ID, this length is only known at runtime and
hence so far needed to be derived from the internal in_iv pointer
pointing to the beginning of the payload of the current incooing
record.
By now, however, those uses of mbedtls_ssl_in_hdr_len() where the
presence of a CID would need to be detected have been removed
(specifically, ssl_parse_record_header() doesn't use it anymore
when checking that the current datagram is large enough to hold
the record header, including the CID), and it's sufficient to
statically return the default record header sizes of 5 / 13 Bytes
for TLS / DTLS.
The methods to import and generate a key in a secure element drivers
were written for an earlier version of the application-side interface.
Now that there is a psa_key_attributes_t structure that combines all
key metadata including its lifetime (location), type, size, policy and
extra type-specific data (domain parameters), pass that to drivers
instead of separate arguments for each piece of metadata. This makes
the interface less cluttered.
Update parameter names and descriptions to follow general conventions.
Document the public-key output on key generation more precisely.
Explain that it is optional in a driver, and when a driver would
implement it. Declare that it is optional in the core, too (which
means that a crypto core might not support drivers for secure elements
that do need this feature).
Update the implementation and the tests accordingly.
Register an existing key in a secure element.
Minimal implementation that doesn't call any driver method and just
lets the application declare whatever it wants.
Pass the key creation method (import/generate/derive/copy) to the
driver methods to allocate or validate a slot number. This allows
drivers to enforce policies such as "this key slot can only be used
for keys generated inside the secure element".
Test the behavior of the getter/setter functions.
Test that psa_get_key_slot_number() reports a slot number for a key in
a secure element, and doesn't report a slot number for a key that is
not in a secure element.
Test that psa_get_key_slot_number() reports the correct slot number
for a key in a secure element.
Add a slot_number field to psa_key_attributes_t and getter/setter
functions. Since slot numbers can have the value 0, indicate the
presence of the field via a separate flag.
In psa_get_key_attributes(), report the slot number if the key is in a
secure element.
When creating a key, for now, applications cannot choose a slot
number. A subsequent commit will add this capability in the secure
element HAL.
Add infrastructure for internal, external and dual-use flags, with a
compile-time check (if static_assert is available) to ensure that the
same numerical value doesn't get declared for two different purposes
in crypto_struct.h (external or dual-use) and
psa_crypto_core.h (internal).
Commit 16b1bd8932 "bn_mul.h: add ARM DSP optimized MULADDC code"
added some ARM DSP instructions that was assumed to always be available
when __ARM_FEATURE_DSP is defined to 1. Unfortunately it appears that
the ARMv5TE architecture (GCC flag -march=armv5te) supports the DSP
instructions, but only in Thumb mode and not in ARM mode, despite
defining __ARM_FEATURE_DSP in both cases.
This patch fixes the build issue by requiring at least ARMv6 in addition
to the DSP feature.
Conflict resolution:
* `scripts/config.pl`:
Take the exclusion of `MBEDTLS_PSA_CRYPTO_SE_C` from the API branch.
Take the removal of `MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C` (obsolete) from
the development branch.
* `tests/scripts/all.sh`:
Multiple instances of factoring a sequence of `config.pl` calls into
a mere `config.pl baremetal` in the development branch, and a change in
the composition of `baremetal` in the API branch. In each case, take the
version from development.
* `tests/suites/test_suite_psa_crypto_slot_management.function`:
A function became non-static in development and disappeared in the API
branch. Keep the version from the API branch. Functions need to be
non-static if they're defined but unused in some configurations,
which is not the case for any function in this file at the moment.
* `tests/suites/test_suite_psa_crypto.function`:
Consecutive changes in the two branches, reconciled.
Resolve conflicts by performing the following operations:
- Reject changes related to building a crypto submodule, since Mbed
Crypto is the crypto submodule.
- Reject X.509, NET, and SSL changes.
- Reject changes to README, as Mbed Crypto is a different project from
Mbed TLS, with a different README.
- Avoid adding mention of ssl-opt.sh in a comment near some modified
code in include/CMakeLists.txt (around where ENABLE_TESTING as added).
- Align config.pl in Mbed TLS with config.pl in Mbed Crypto where PSA
options are concerned, to make future merging easier. There is no
reason for the two to be different in this regard, now that Mbed TLS
always depends on Mbed Crypto. Remaining differences are only the
PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER option and the absence of X.509,
NET, and SSL related options in Mbed Crypto's config.pl.
- Align config.h in Mbed Crypto with Mbed TLS's copy, with a few notable
exceptions:
- Leave CMAC on by default.
- Leave storage on by default (including ITS emulation).
- Avoid documenting the PSA Crypto API as is in beta stage in
documentation for MBEDTLS_PSA_CRYPTO_C.
The only remaining differences are a lack of X.509, NET, and SSL
options in Mbed Crypto's config.h, as well as an additional
Mbed-Crypto-specific PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER option.
Documentation for the check params feature and related macros is also
updated to match Mbed TLS's description.
- Reject tests/data_files/Makefile changes to generate DER versions of
CRTs and keys, as none of those are used by Mbed Crypto tests.
- Add the "no PEM and no filesystem" test to all.sh, without ssl-opt.sh
run, as Mbed Crypto doesn't have ssl-opt.sh. Also remove use of PSA
Crypto storage and ITS emulation, since those depend on filesystem
support.
- Reject addition of test when no ciphersuites have MAC to all.sh, as
the option being tested, MBEDTLS_SSL_SOME_MODES_USE_MAC, is not
present in Mbed Crypto.
- Use baremetal config in all.sh, as Mbed Crypto's baremetal
configuration does exclude the net module (as it doesn't exist in Mbed
Crypto)
- Reject cmake_subproject_build changes, continuing to link only
libmbedcrypto.
- Reject changes to visualc and associated templates. Mbed Crypto
doesn't need additional logic to handle submodule-sourced headers.
- Avoid adding fuzzers from Mbed TLS. The only relevant fuzzers are the
privkey and pubkey fuzzers, but non-trivial work would be required to
integrate those into Mbed Crypto (more than is comfortable in a merge
commit).
- Reject addition of Docker wrappers for compat.sh and ssl-opt.sh, as
those are not present in Mbed Crypto.
- Remove calls to SSL-related scripts from basic-in-docker.sh
Fix test errors by performing the following:
- Avoid using a link that Doxygen can't seem to resolve in Mbed Crypto,
but can resolve in Mbed TLS. In documentation for
MBEDTLS_CHECK_PARAMS, don't attempt to link to MBEDTLS_PARAM_FAILED.
* origin/development: (339 commits)
Do not build fuzz on windows
No booleans and import config
Removing space before opening parenthesis
Style corrections
Syntax fix
Fixes warnings from MSVC
Add a linker flag to enable gcov in basic-build-test.sh
Update crypto submodule to a revision with the HAVEGE header changes
Test with MBEDTLS_ECP_RESTARTABLE
Allow TODO in code
Use the docstring in the command line help
Split _abi_compliance_command into smaller functions
Record the commits that were compared
Document how to build the typical argument for -s
Allow running /somewhere/else/path/to/abi_check.py
tests: Limit each log to 10 GiB
Warn if VLAs are used
Remove redundant compiler flag
Consistently spell -Wextra
Fix parsing issue when int parameter is in base 16
...
65528 bits is more than any reasonable key until we start supporting
post-quantum cryptography.
This limit is chosen to allow bit-sizes to be stored in 16 bits, with
65535 left to indicate an invalid value. It's a whole number of bytes,
which facilitates some calculations, in particular allowing a key of
exactly PSA_CRYPTO_MAX_STORAGE_SIZE to be created but not one bit
more.
As a resource usage limit, this is arguably too large, but that's out
of scope of the current commit.
Test that key import, generation and derivation reject overly large
sizes.
Move the "core attributes" to a substructure of psa_key_attribute_t.
The motivation is to be able to use the new structure
psa_core_key_attributes_t internally.
Add a parameter to the key import method of a secure element driver to
make it report the key size in bits. This is necessary (otherwise the
core has no idea what the bit-size is), and making import report it is
easier than adding a separate method (for other key creation methods,
this information is an input, not an output).
Secure element support is not yet usable in the real world. Only part
of the feature is implemented and the part that's implemented is not
sufficient for real-world uses. A lot of error handling is missing,
and there are no tests.
This commit should be reverted once the feature has stabilized.
In the generic message digest abstraction, instead of storing method
pointers in the per-algorithm data structure and using wrapper
functions as those methods, call the per-algorithm function directly.
This saves some code size (2336B -> 2043B for md with all algorithms
enabled on M0+ with gcc -Os). This should also make it easier to
optimize the case when a single algorithm is supported. In addition,
this is a very slight security improvement since it removes one
opportunity for a buffer overflow to directly turn into letting the
attacker overwrite a pointer to a function pointer.
This commit does not modify the documented API. However, it removes
the possibility for users to define their own hash implementations and
use them by building their own md_info.
Changing mbedtls_md_context to contain a md type identifier rather
than a pointer to an info structure would save a few more bytes and a
few more runtime memory accesses, but would be a major API break since
a lot of code uses `const mbedtls_md_info *` to keep track of which
hash is in use.
In configurations wanting an alternative ripemd160 implementation, We
were including the ordinary Mbed Crypto ripemd160.h instead of the
user-provided ripemd160_alt.h. Use the user-provided header instead.
To help the build system find the correct include files, paths starting
with "mbedtls/" or "psa/" must be used. Otherwise, you can run into
build failures like the following when building Mbed Crypto as a
submodule.
In file included from chachapoly.c:31:0:
../../include/mbedtls/chachapoly.h:43:10: fatal error: poly1305.h: No such file or directory
#include "poly1305.h"
^~~~~~~~~~~~
compilation terminated.
Includes for ALT implementations are not modified, as the alt headers
are provided by system integrators and not Mbed TLS or Mbed Crypto.
Most driver methods are not allowed to modify the persistent data, so
the driver context structure contains a const pointer to it. Pass a
non-const pointer to the persstent data to the driver methods that
need it: init, allocate, destroy.
Pass the driver context to all driver methods except the ones that
operate on an already-setup operation context.
Rename `p_context` arguments to `op_context` to avoid confusion
between contexts.
This slightly increases storage requirements, but works in more use
cases. In particular, it allows drivers to treat choose slot numbers
with a monotonic counter that is incremented each time a key is
created, without worrying about overflow in practice.
Instead of having one giant table containing all possible methods,
represent a driver's method table as a structure containing pointers
to substructures. This way a driver that doesn't implement a certain
class of operations can use NULL for this class as a whole instead of
storing NULL for each method.
* origin/development: (36 commits)
Do not build fuzz on windows
No booleans and import config
Removing space before opening parenthesis
Style corrections
Syntax fix
Fixes warnings from MSVC
Add a linker flag to enable gcov in basic-build-test.sh
tests: Limit each log to 10 GiB
Fix parsing issue when int parameter is in base 16
checks MBEDTLS_PEM_PARSE_C
Restore programs/fuzz/Makefile after in-tree cmake
Move fuzz directory to programs
Documentation for corpus generation
Restore tests/fuzz/Makefile after in-tree cmake
Adding ifdefs to avoid warnings for unused globals
Adds LDFLAGS fsanitize=address
Refactor receive_uint32()
Refactor get_byte function
Make the script portable to both pythons
Update the test encoding to support python3
...
* origin/pr/1622: (29 commits)
Do not build fuzz on windows
No booleans and import config
Removing space before opening parenthesis
Style corrections
Syntax fix
Fixes warnings from MSVC
Add a linker flag to enable gcov in basic-build-test.sh
checks MBEDTLS_PEM_PARSE_C
Restore programs/fuzz/Makefile after in-tree cmake
Move fuzz directory to programs
Documentation for corpus generation
Restore tests/fuzz/Makefile after in-tree cmake
Adding ifdefs to avoid warnings for unused globals
Adds LDFLAGS fsanitize=address
Ignore compiled object files and executables
Also clean the fuzz subdirectory
copyediting README.md
Protecting client/server fuzz targts with ifdefs
Makefile support 1
Fuzz README and direct compilation
...
* origin/development: (33 commits)
Test with MBEDTLS_ECP_RESTARTABLE
Allow TODO in code
Use the docstring in the command line help
Split _abi_compliance_command into smaller functions
Record the commits that were compared
Document how to build the typical argument for -s
Allow running /somewhere/else/path/to/abi_check.py
Warn if VLAs are used
Remove redundant compiler flag
Consistently spell -Wextra
Update Mbed Crypto to contain mbed-crypto#152
Improve compatibility with firewalled networks
Dockerfile: apt -> apt-get
Change Docker container to bionic
Clean up file prologue comments
Add docker-based test scripts
ChangeLog: Add ChangeLog entry for #2681
Allow declarations after statements
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
...
* origin/pr/2632:
Adapt ChangeLog
Avoid use of large stack buffers in mbedtls_x509_write_crt_pem()
Improve documentation of mbedtls_pem_write_buffer()
Perform CRT writing in-place on the output buffer
Adapt x509write_crt.c to coding style
Secure element support has its own source file, and in addition
requires many hooks in other files. This is a nontrivial amount of
code, so make it optional (but default on).
Technically we could have reused the old one for the new API, but then
we had to set an extra field during setup. The new version works when
all the fields that haven't been set explicitely are zero-initialised.
This change affects the psa_key_derivation_s structure. With the buffer
removed from the union, it is empty if MBEDTLS_MD_C is not defined.
We can avoid undefined behaviour by adding a new dummy field that is
always present or make the whole union conditional on MBEDTLS_MD_C.
In this latter case the initialiser macro has to depend on MBEDTLS_MD_C
as well. Furthermore the first structure would be either
psa_hkdf_key_derivation_t or psa_tls12_prf_key_derivation_t both of
which are very deep and would make the initialisation macro difficult
to maintain, therefore we go with the first option.
We want to make the PRF context structure depend on this flag, but
crypto_extra.h is included after crypto_struct.h and having the
option at its original place would not affect crypto_struct.h.
Add the compile time option PSA_PRE_1_0_KEY_DERIVATION. If this is not
turned on, then the function `psa_key_derivation()` is removed.
Most of the tests regarding key derivation haven't been adapted to the
new API yet and some of them have only been adapted partially. When this
new option is turned off, the tests using the old API and test cases
using the old API of partially adapted tests are skipped.
The sole purpose of this option is to make the transition to the new API
smoother. Once the transition is complete it can and should be removed
along with the old API and its implementation.
From the implementation point of view does not make much difference to
constrain the input order.
We constrain it because, this way the code is easier to review, the data
flow easier to understand and the implementations in general are easier
to validate.
* restricted/pr/573:
Remove redundant config.pl call
Add a test for signing content with a long ECDSA key
Add documentation notes about the required size of the signature buffers
Add missing MBEDTLS_ECP_C dependencies in check_config.h
Change size of preallocated buffer for pk_sign() calls
* origin/pr/2711:
programs: Make `make clean` clean all programs always
ssl_tls: Enable Suite B with subset of ECP curves
windows: Fix Release x64 configuration
platform: Include stdarg.h where needed
timing: Remove redundant include file
net_sockets: Fix typo in net_would_block()
* origin/pr/2697:
Update crypto submodule
Add all.sh component that exercises invalid_param checks
Remove mbedtls_param_failed from programs
Make it easier to define MBEDTLS_PARAM_FAILED as assert
Make test suites compatible with #include <assert.h>
Pass -m32 to the linker as well
Don't systematically rebuild programs
Update havege.h to the new version in the crypto module.
This is technically an API break, since the type mbedtls_havege_state
is exposed in a public header. However normal applications should not
be affected.
There is no ABI break on platforms where uint32_t and int are treated
identically, which is virtually all of them.
Fix#2598
The elements of the HAVEGE state are manipulated with bitwise
operations, with the expectations that the elements are 32-bit
unsigned integers (or larger). But they are declared as int, and so
the code has undefined behavior. Clang with Asan correctly points out
some shifts that reach the sign bit.
Since these are supposed to be 32-bit unsigned integers, declare them
as uint32_t.
This is technically an API break, since the type mbedtls_havege_state
is exposed in a public header. However normal applications should not
be affected.
* origin/pr/2260:
Update crypto submodule
Remove heading spaces in tests/data_files/Makefile
Re-generate library/certs.c from script
Add new line at the end of test-ca2.key.enc
Use strict syntax to annotate origin of test data in certs.c
Add run to all.sh exercising !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO
Allow DHM self test to run without MBEDTLS_PEM_PARSE_C
ssl-opt.sh: Auto-skip tests that use files if MBEDTLS_FS_IO unset
Document origin of hardcoded certificates in library/certs.c
Adapt ChangeLog
Rename server1.der to server1.crt.der
Add DER encoded files to git tree
Add build instructions to generate DER versions of CRTs and keys
Document "none" value for ca_path/ca_file in ssl_client2/ssl_server2
ssl_server2: Skip CA setup if `ca_path` or `ca_file` argument "none"
ssl_client2: Skip CA setup if `ca_path` or `ca_file` argument "none"
Correct white spaces in ssl_server2 and ssl_client2
Adapt ssl_client2 to parse DER encoded test CRTs if PEM is disabled
Adapt ssl_server2 to parse DER encoded test CRTs if PEM is disabled
Introduce a new configuration option MBEDTLS_CHECK_PARAMS_ASSERT,
which is disabled by default. When this option is enabled,
MBEDTLS_PARAM_FAILED defaults to assert rather than to a call to
mbedtls_param_failed, and <assert.h> is included.
This fixes#2671 (no easy way to make MBEDTLS_PARAM_FAILED assert)
without breaking backward compatibility. With this change,
`config.pl full` runs tests with MBEDTLS_PARAM_FAILED set to assert,
so the tests will fail if a validation check fails, and programs don't
need to provide their own definition of mbedtls_param_failed().
Increase the SO versions of libmbedx509 and libmbedtls due to the
addition of fields in publicly visible (non-opaque) structs:
- mbedtls_ssl_config
- mbedtls_ssl_context
- mbedtls_x509_crt
Relative include paths should be avoided. The build system will
determine where to pull in includes from. Specifically, `#include
"../mbedtls/config.h"` shouldn't be used. Use `#include
"mbedtls/config.h` instead, so that the submodule-building makefiles can
change which directory to use to get mbedtls include files from.
Fixes#141
Remove the key creation functions from before the attribute-based API,
i.e. the key creation functions that worked by allocating a slot, then
setting metadata through the handle and finally creating key material.
All of them are copied from (former) CRT and key files in `tests/data_files`.
For files which have been regenerated since they've been copied to `certs.c`,
update the copy.
Add declarations for DER encoded test CRTs to certs.h
Add DER encoded versions of CRTs to certs.c
fix comment in certs.c
Don't use (signed) char for DER encoded certificates
Consistently use `const char *` for test CRTs regardless of encoding
Remove non-sensical and unused PW variable for DER encoded key
Provide test CRTs in PEM and DER fmt, + pick suitable per config
This commit modifies `certs.h` and `certs.c` to start following the
following pattern for the provided test certificates and files:
- Raw test data is named `NAME_ATTR1_ATTR2_..._ATTRn`
For example, there are
`TEST_CA_CRT_{RSA|EC}_{PEM|DER}_{SHA1|SHA256}`.
- Derived test data with fewer attributes, iteratively defined as one
of the raw test data instances which suits the current configuration.
For example,
`TEST_CA_CRT_RSA_PEM`
is one of `TEST_CA_CRT_RSA_PEM_SHA1` or `TEST_CA_CRT_RSA_PEM_SHA256`,
depending on whether SHA-1 and/or SHA-256 are defined in the current
config.
Add missing public declaration of test key password
Fix signedness and naming mismatches
Further improve structure of certs.h and certs.c
Fix definition of mbedtls_test_cas test CRTs depending on config
Remove semicolon after macro string constant in certs.c
This commit modifies mbedtls_ssl_get_peer_cid() to also allow passing
NULL pointers in the arguments for the peer's CID value and length, in
case this information is needed.
For example, some users might only be interested in whether the use of
the CID was negotiated, in which case both CID value and length pointers
can be set to NULL. Other users might only be interested in confirming
that the use of CID was negotiated and the peer chose the empty CID,
in which case the CID value pointer only would be set to NULL.
It doesn't make sense to pass a NULL pointer for the CID length but a
non-NULL pointer for the CID value, as the caller has no way of telling
the length of the returned CID - and this case is therefore forbidden.
This commit modifies the CID configuration API mbedtls_ssl_conf_cid_len()
to allow the configuration of the stack's behaviour when receiving an
encrypted DTLS record with unexpected CID.
Currently, the stack silently ignores DTLS frames with an unexpected CID.
However, in a system which performs CID-based demultiplexing before passing
datagrams to the Mbed TLS stack, unexpected CIDs are a sign of something not
working properly, and users might want to know about it.
This commit introduces an SSL error code MBEDTLS_ERR_SSL_UNEXPECTED_CID
which the stack can return in response to an unexpected CID. It will
conditionally be put to use in subsequent commits.
mbedtls_ssl_context contains pointers in_buf, in_hdr, in_len, ...
which point to various parts of the header of an incoming TLS or
DTLS record; similarly, there are pointers out_buf, ... for
outgoing records.
This commit adds fields in_cid and out_cid which point to where
the CID of incoming/outgoing records should reside, if present,
namely prior to where the record length resides.
Quoting https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-04:
The DTLSInnerPlaintext value is then encrypted and the CID added to
produce the final DTLSCiphertext.
struct {
ContentType special_type = tls12_cid; /* 25 */
ProtocolVersion version;
uint16 epoch;
uint48 sequence_number;
opaque cid[cid_length]; // New field
uint16 length;
opaque enc_content[DTLSCiphertext.length];
} DTLSCiphertext;
For outgoing records, out_cid is set in ssl_update_out_pointers()
based on the settings in the current outgoing transform.
For incoming records, ssl_update_in_pointers() sets in_cid as if no
CID was present, and it is the responsibility of ssl_parse_record_header()
to update the field (as well as in_len, in_msg and in_iv) when parsing
records that do contain a CID. This will be done in a subsequent commit.
Finally, the code around the invocations of ssl_decrypt_buf()
and ssl_encrypt_buf() is adapted to transfer the CID from the
input/output buffer to the CID field in the internal record
structure (which is what ssl_{encrypt/decrypt}_buf() uses).
Note that mbedtls_ssl_in_hdr_len() doesn't need change because
it infers the header length as in_iv - in_hdr, which will account
for the CID for records using such.
Using the Connection ID extension increases the maximum record expansion
because
- the real record content type is added to the plaintext
- the plaintext may be padded with an arbitrary number of
zero bytes, in order to prevent leakage of information
through package length analysis. Currently, we always
pad the plaintext in a minimal way so that its length
is a multiple of 16 Bytes.
This commit adapts the various parts of the library to account
for that additional source of record expansion.
Context:
The CID draft does not require that the length of CIDs used for incoming
records must not change in the course of a connection. Since the record
header does not contain a length field for the CID, this means that if
CIDs of varying lengths are used, the CID length must be inferred from
other aspects of the record header (such as the epoch) and/or by means
outside of the protocol, e.g. by coding its length in the CID itself.
Inferring the CID length from the record's epoch is theoretically possible
in DTLS 1.2, but it requires the information about the epoch to be present
even if the epoch is no longer used: That's because one should silently drop
records from old epochs, but not the entire datagrams to which they belong
(there might be entire flights in a single datagram, including a change of
epoch); however, in order to do so, one needs to parse the record's content
length, the position of which is only known once the CID length for the epoch
is known. In conclusion, it puts a significant burden on the implementation
to infer the CID length from the record epoch, which moreover mangles record
processing with the high-level logic of the protocol (determining which epochs
are in use in which flights, when they are changed, etc. -- this would normally
determine when we drop epochs).
Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs,
but every epoch may use a set of CIDs of varying lengths -- in that case,
it's even theoretically impossible to do record header parsing based on
the epoch configuration only.
We must therefore seek a way for standalone record header parsing, which
means that we must either (a) fix the CID lengths for incoming records,
or (b) allow the application-code to configure a callback to implement
an application-specific CID parsing which would somehow infer the length
of the CID from the CID itself.
Supporting multiple lengths for incoming CIDs significantly increases
complexity while, on the other hand, the restriction to a fixed CID length
for incoming CIDs (which the application controls - in contrast to the
lengths of the CIDs used when writing messages to the peer) doesn't
appear to severely limit the usefulness of the CID extension.
Therefore, the initial implementation of the CID feature will require
a fixed length for incoming CIDs, which is what this commit enforces,
in the following way:
In order to avoid a change of API in case support for variable lengths
CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which
includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len()
which applies to an SSL configuration, and which fixes the CID length that
any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound
to the given SSL configuration must use.
While this creates a slight redundancy of parameters, it allows to
potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which
could allow users to register a callback which dynamically infers the
length of a CID at record header parsing time, without changing the
rest of the API.
The function mbedtls_ssl_hdr_len() returns the length of the record
header (so far: always 13 Bytes for DTLS, and always 5 Bytes for TLS).
With the introduction of the CID extension, the lengths of record
headers depends on whether the records are incoming or outgoing,
and also on the current transform.
Preparing for this, this commit splits mbedtls_ssl_hdr_len() in two
-- so far unmodified -- functions mbedtls_ssl_in_hdr_len() and
mbedtls_ssl_out_hdr_len() and replaces the uses of mbedtls_ssl_hdr_len()
according to whether they are about incoming or outgoing records.
There is no need to change the signature of mbedtls_ssl_{in/out}_hdr_len()
in preparation for its dependency on the currently active transform,
since the SSL context is passed as an argument, and the currently
active transform is referenced from that.
This commit adds a static array `cid` to the internal structure
`mbedtls_record` representing encrypted and decrypted TLS records.
The expected evolution of state of this field is as follows:
- When handling an incoming record, the caller of `mbedtls_decrypt_buf()`
has to make sure the CID array field in `mbedtls_record` has been
properly set. Concretely, it will be copied from the CID from the record
header during record parsing.
- During decryption in `mbedtls_decrypt_buf()`, the transforms
incoming CID is compared to the CID in the `mbedtls_record`
structure representing the record to be decrypted.
- For an outgoing TLS record, the caller of `mbedtls_encrypt_buf()`
clears the CID in the `mbedtls_record` structure.
- During encryption in `mbedtls_encrypt_buf()`, the CID field in
`mbedtls_record` will be copied from the out-CID in the transform.
These will be copied from the CID fields in mbedtls_ssl_handshake_params
(outgoing CID) and mbedtls_ssl_context (incoming CID) when the transformation
is set up at the end of the handshake.
* mbedtls_ssl_context gets fields indicating whether the CID extension
should be negotiated in the next handshake, and, if yes, which CID
the user wishes the peer to use.
This information does not belong to mbedtls_ssl_handshake_params
because (a) it is configured prior to the handshake, and (b) it
applies to all subsequent handshakes.
* mbedtls_ssl_handshake_params gets fields indicating the state of CID
negotiation during the handshake. Specifically, it indicates if the
use of the CID extension has been negotiated, and if so, which CID
the peer wishes us to use for outgoing messages.
Conflicts:
* library/ssl_cli.c, library/ssl_tls.c:
Removed on the development branch. Keep them removed.
* include/psa/crypto_extra.h, library/psa_crypto_storage.c,
tests/suites/test_suite_psa_crypto.data,
tests/suites/test_suite_psa_crypto.function,
tests/suites/test_suite_psa_crypto_persistent_key.data,
tests/suites/test_suite_psa_crypto_slot_management.data,
tests/suites/test_suite_psa_crypto_slot_management.function:
Modified on the development branch only to implement the enrollment
algorithm, which has been reimplemented on the API branch.
Keep the API branch.
* origin/pr/2403: (24 commits)
crypto: Update to Mbed Crypto 8907b019e7
Create seedfile before running tests
crypto: Update to Mbed Crypto 81f9539037
ssl_cli.c : add explicit casting to unsigned char
Generating visualc files - let Mbed TLS take precedence over crypto
Add a link to the seedfile for out-of-tree cmake builds
Adjust visual studio file generation to always use the crypto submodule
all.sh: unparallelize mingw tests
all.sh - disable parallelization for shared target tests
config.pl: disable PSA_ITS_FILE and PSA_CRYPTO_STORAGE for baremetal
all.sh: unset crypto storage define in a psa full config cmake asan test
all.sh: unset FS_IO-dependent defines for tests that do not have it
curves.pl - change test script to not depend on the implementation
Export the submodule flag to sub-cmakes
Disable MBEDTLS_ECP_RESTARTABLE in full config
Export the submodule flag to sub-makes
Force the usage of crypto submodule
Fix crypto submodule usage in Makefile
Documentation rewording
Typo fixes in documentation
...
* origin/pr/2410:
Update change log
Document the default value for the maximum fragment length
Improve clarity of mbedtls_ssl_conf_max_frag_len documentation
Reword ssl_conf_max_frag_len documentation
Fix typos and miswording in the mbedtls_ssl_conf_max_frag_len documentation comment
Reword ssl_conf_max_frag_len documentation to clarify its necessity
Previously it was disabled as too experimental, which no longer holds. Also,
this option introduces new APIs, so it's not only about an internal
alternative (as the comment in config.pl used to state) - people who request a
full config should get all of the available APIs.
Adapt all.sh: now all builds with full config will also test this option, and
builds with the default config will test without it. Just to be sure, let's
have a build with full config minus this option.
Update documentation of MBEDTLS_USE_PSA_CRYPTO to reflect the status of the
new APIs it enables in Mbed TLS and why they're still opt-in.
Also enable it in scripts/config.pl full, as well as two storage options that
were only blacklisted from full config because they depended on
MBEDTLS_PSA_CRYPTO_C.
Don't use "safe buffer size", because this it's somewhat misleading to
make it about safety: a buffer size that's too small will lead to a
runtime error, not to undefined behavior.
Convert the description of PSA_ALG_TLS12_PRF and
PSA_ALG_TLS12_PSK_TO_MS to the key derivation API that takes one input
at a time rather than the old {secret,salt,label} interface.
Define a new input category "seed".
PSA_KEY_ATTRIBUTES_INIT and psa_key_attributes_init weren't declared
in the API document, only defined in our implementation, but they are
referenced in the API document.
Resolve conflicts by performing the following operations:
- Reject changes to files removed during the creation of Mbed Crypto
from Mbed TLS.
- Reject the addition of certificates that would not be used by any
tests, including rejecting the addition of Makefile rules to
generate these certificates.
- Reject changes to error.c referencing modules that are not part of
Mbed Crypto.
* origin/development: (80 commits)
Style fix
Fix test data
Update test data
Add some negative test cases
Fix minor issues
Add ChangeLog entry about listing all SAN
Remove unneeded whitespaces
Fix mingw CI failures
Initialize psa_crypto in ssl test
Check that SAN is not malformed when parsing
Documentation fixes
Fix ChangeLog entry
Fix missing tls version test failures
Fix typo
Fix ChangeLog entry location
Add changeLog entry
Add test for export keys functionality
Add function to retrieve the tls_prf type
Add tests for the public tls_prf API
Add public API for tls_prf
...
* origin/pr/2530: (27 commits)
Style fix
Fix test data
Update test data
Add some negative test cases
Fix minor issues
Add ChangeLog entry about listing all SAN
Check that SAN is not malformed when parsing
Documentation fixes
Fix ChangeLog entry
Fail in case critical crt policy not supported
Update SAN parsing documentation
change the type of hardware_module_name member
Change mbedtls_x509_subject_alternative_name
Add length checking in certificate policy parsing
Rephrase x509_crt extension member description
Rephrase changeLog entries
Remove redundant memset()
Propogate error when parsing SubjectAltNames
Tidy up style in x509_info_subject_alt_name
Print unparseable SubjectAlternativeNames
...
* origin/pr/2538:
Remove unneeded whitespaces
Fix mingw CI failures
Initialize psa_crypto in ssl test
Fix missing tls version test failures
Fix typo
Fix ChangeLog entry location
Add changeLog entry
Add test for export keys functionality
Add function to retrieve the tls_prf type
Add tests for the public tls_prf API
Add public API for tls_prf
Add eap-tls key derivation in the examples.
Add ChangeLog entry
Add an extra key export function
Have the temporary buffer allocated dynamically
Zeroize secret data in the exit point
Add a single exit point in key derivation function
generate_key is a more classical name. The longer name was only
introduced to avoid confusion with getting a key from a generator,
which is key derivation, but we no longer use the generator
terminology so this reason no longer applies.
perl -i -pe 's/psa_generate_random_key/psa_generate_key/g' $(git ls-files)
“Tampering detected” was misleading because in the real world it can
also arise due to a software bug. “Corruption detected” is neutral and
more precisely reflects what can trigger the error.
perl -i -pe 's/PSA_ERROR_TAMPERING_DETECTED/PSA_ERROR_CORRUPTION_DETECTED/gi' $(git ls-files)
Move DSA-related key types and algorithms to the
implementation-specific header file. Not that we actually implement
DSA, but with domain parameters, we should be able to.
Parametrize finite-field Diffie-Hellman key types with a DH group
identifier, in the same way elliptic curve keys are parametrized with
an EC curve identifier.
Define the DH groups from the TLS registry (these are the groups from
RFC 7919).
Replicate the macro definitions and the metadata tests from elliptic
curve identifiers to DH group identifiers.
Define PSA_DH_GROUP_CUSTOM as an implementation-specific extension for
which domain parameters are used to specify the group.
Move psa_get_key_domain_parameters() and
psa_set_key_domain_parameters() out of the official API and declare
them to be implementation-specific extensions.
Expand the documentation of psa_set_key_domain_parameters() a bit to
explain how domain parameters are used.
Remove all mentions of domain parameters from the documentation of API
functions. This leaves DH and DSA effectively unusable.
Generators are mostly about key derivation (currently: only about key
derivation). "Generator" is not a commonly used term in cryptography.
So favor "derivation" as terminology.
This commit updates the function descriptions.
Generators are mostly about key derivation (currently: only about key
derivation). "Generator" is not a commonly used term in cryptography.
So favor "derivation" as terminology. Call a generator a key
derivation operation structure, since it behaves like other multipart
operation structures. Furthermore, the function names are not fully
consistent.
In this commit, I rename the functions to consistently have the prefix
"psa_key_derivation_". I used the following command:
perl -i -pe '%t = (
psa_crypto_generator_t => "psa_key_derivation_operation_t",
psa_crypto_generator_init => "psa_key_derivation_init",
psa_key_derivation_setup => "psa_key_derivation_setup",
psa_key_derivation_input_key => "psa_key_derivation_input_key",
psa_key_derivation_input_bytes => "psa_key_derivation_input_bytes",
psa_key_agreement => "psa_key_derivation_key_agreement",
psa_set_generator_capacity => "psa_key_derivation_set_capacity",
psa_get_generator_capacity => "psa_key_derivation_get_capacity",
psa_generator_read => "psa_key_derivation_output_bytes",
psa_generate_derived_key => "psa_key_derivation_output_key",
psa_generator_abort => "psa_key_derivation_abort",
PSA_CRYPTO_GENERATOR_INIT => "PSA_KEY_DERIVATION_OPERATION_INIT",
PSA_GENERATOR_UNBRIDLED_CAPACITY => "PSA_KEY_DERIVATION_UNLIMITED_CAPACITY",
); s/\b(@{[join("|", keys %t)]})\b/$t{$1}/ge' $(git ls-files)
In psa_import_key, change the order of parameters to pass
the pointer where the newly created handle will be stored last.
This is consistent with most other library functions that put inputs
before outputs.
In psa_generate_derived_key, change the order of parameters to pass
the pointer where the newly created handle will be stored last.
This is consistent with most other library functions that put inputs
before outputs.
Use individual setters for the id and lifetime fields of an attribute
structure, like the other attributes.
This commit updates the specification and adds an implementation of
the new setters.
Add an additional function `mbedtls_ssl_export_keys_ext_t()`
for exporting key, that adds additional information such as
the used `tls_prf` and the random bytes.
1) Fix typo in `mbedtls_x509_parse_subject_alt_name()` documentation.
2) Add a not in `mbedtls_x509_parse_subject_alt_name()` documentation,
stating that the lifetime of the target structure is restricted
by the lifetime ofthe parsed certificate.
Make `mbedtls_x509_subject_alternative_name` to be a single item
rather than a list. Adapt the subject alternative name parsing function,
to receive a signle `mbedtls_x509_buf` item from the subject_alt_names
sequence of the certificate.
The documentation for some new structures and members was only a C style
comment and wasn't picked up by doxygen. This commit adds the missing
asterisks.
Define a range of key identifiers for use by the application
(0..2^30-1), a range for use by implementations (2^30..2^31), and a
range that is reserved for future use (2^31..2^32-1).
Change the scope of key identifiers to be global, rather than
per lifetime. As a result, you now need to specify the lifetime of a
key only when creating it.
Declare algorithms for ChaCha20 and ChaCha20-Poly1305, and a
corresponding (common) key type.
Don't declare Poly1305 as a separate algorithm because it's a one-time
authenticator, not a MAC, so the API isn't suitable for it (no way to
use a nonce).
New macros PSA_AEAD_UPDATE_OUTPUT_SIZE, PSA_AEAD_FINISH_OUTPUT_SIZE
and PSA_AEAD_VERIFY_OUTPUT_SIZE to determine the output buffer sizes
for psa_aead_update(), psa_aead_finish() and psa_aead_verify().
Like psa_aead_finish(), psa_aead_verify() needs to produce output from
the last partial block of input if psa_aead_update() cannot produce
output byte by byte.
In psa_import_key and psa_copy_key, some information comes from the
key data (input buffer or source key) rather than from the attributes:
key size for import, key size and type and domain parameters for copy.
If an unused attribute is nonzero in the attribute structure, check
that it matches the correct value. This protects against application
errors.
* origin/pr/1633: (26 commits)
Fix uninitialized variable access in debug output of record enc/dec
Adapt PSA code to ssl_transform changes
Ensure non-NULL key buffer when building SSL test transforms
Catch errors while building SSL test transforms
Use mbedtls_{calloc|free}() in SSL unit test suite
Improve documentation of mbedtls_record
Adapt record length value after encryption
Alternative between send/recv transform in SSL record test suite
Fix memory leak on failure in test_suite_ssl
Rename ssl_decrypt_buf() to mbedtls_ssl_decrypt_buf() in comment
Add record encryption/decryption tests for ARIA to SSL test suite
Improve documentation of mbedtls_ssl_transform
Double check that record expansion is as expected during decryption
Move debugging output after record decryption
Add encryption/decryption tests for small records
Add tests for record encryption/decryption
Reduce size of `ssl_transform` if no MAC ciphersuite is enabled
Remove code from `ssl_derive_keys` if relevant modes are not enabled
Provide standalone version of `ssl_decrypt_buf`
Provide standalone version of `ssl_encrypt_buf`
...
Resolve merge conflicts by performing the following actions:
- Reject changes to deleted files.
- Reject changes to generate_errors.pl and generate_visualc_files.pl.
Don't add an 'include-crypto' option which would attempt to use the
non-existent crypto submodule.
- list-identifiers.sh had the `--internal` option added to it, which
lists identifiers only in internal headers. Add PSA-specific internal
headers to list-identifiers.sh.
* origin/development: (40 commits)
Document the scripts behaviour further
Use check_output instead of Popen
all.sh: Require i686-w64-mingw32-gcc version >= 6
generate_visualc_files.pl: add mbedtls source shadowing by crypto
generate_errors.pl: refactor and simplify the code
Start unused variable with underscore
Correct documentation
generate_errors.pl: typo fix
revert changes to generate_features.pl and generate_query_config.pl
Check that the report directory is a directory
Use namespaces instead of full classes
Fix pylint issues
Don't put abi dumps in subfolders
Add verbose switch to silence all output except the final report
Fetch the remote crypto branch, rather than cloning it
Prefix internal functions with underscore
Add RepoVersion class to make handling of many arguments easier
Reduce indentation levels
Improve documentation
Use optional arguments for setting repositories
...
There was a guarantee that psa_get_key_attributes() does not require a
subsequent psa_reset_key_attributes() to free resources as long as the
key was created with attributes having this property. This requirement
was hard to pin down because if a key is created with default
parameters, there are cases where it is difficult to ensure that the
domain parameters will be reported without allocating memory. So
remove this guarantee. Now the only case psa_reset_key_attributes() is
not required is if the attribute structure has only been modified with
certain specific setters.
Read extra data from the domain parameters in the attribute structure
instead of taking an argument on the function call.
Implement this for RSA key generation, where the public exponent can
be set as a domain parameter.
Add tests that generate RSA keys with various public exponents.
Change psa_get_domain_parameters() and psa_set_domain_parameters() to
access a psa_key_attributes_t structure rather than a key handle.
In psa_get_key_attributes(), treat the RSA public exponent as a domain
parameter and read it out. This is in preparation for removing the
`extra` parameter of psa_generate_key() and setting the RSA public
exponent for key generation via domain parameters.
In this commit, the default public exponent 65537 is not treated
specially, which allows us to verify that test code that should be
calling psa_reset_key_attributes() after retrieving the attributes of
an RSA key is doing so properly (if it wasn't, there would be a memory
leak), even if the test data happens to use an RSA key with the
default public exponent.
Instead of passing a separate parameter for the key size to
psa_generate_key and psa_generator_import_key, set it through the
attributes, like the key type and other metadata.
This commit adds tests exercising mutually inverse pairs of
record encryption and decryption transformations for the various
transformation types allowed in TLS: Stream, CBC, and AEAD.
The hash contexts `ssl_transform->md_ctx_{enc/dec}` are not used if
only AEAD ciphersuites are enabled. This commit removes them from the
`ssl_transform` struct in this case, saving a few bytes.
Analogous to the previous commit, but concerning the record decryption
routine `ssl_decrypt_buf`.
An important change regards the checking of CBC padding:
Prior to this commit, the CBC padding check always read 256 bytes at
the end of the internal record buffer, almost always going past the
boundaries of the record under consideration. In order to stay within
the bounds of the given record, this commit changes this behavior by
always reading the last min(256, plaintext_len) bytes of the record
plaintext buffer and taking into consideration the last `padlen` of
these for the padding check. With this change, the memory access
pattern and runtime of the padding check is entirely determined by
the size of the encrypted record, in particular not giving away
any information on the validity of the padding.
The following depicts the different behaviors:
1) Previous CBC padding check
1.a) Claimed padding length <= plaintext length
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+------------------------------------...
| read for padding check ...
+------------------------------------...
|
contents discarded
from here
1.b) Claimed padding length > plaintext length
+----------------------------------------+----+
| Record plaintext buffer | PL |
+----------------------------------------+----+
+-------------------------...
| read for padding check ...
+-------------------------...
|
contents discarded
from here
2) New CBC padding check
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+---------------------------------------+
| read for padding check |
+---------------------------------------+
|
contents discarded
until here
The previous version of the record encryption function
`ssl_encrypt_buf` takes the entire SSL context as an argument,
while intuitively, it should only depend on the current security
parameters and the record buffer.
Analyzing the exact dependencies, it turned out that in addition
to the currently active `ssl_transform` instance and the record
information, the encryption function needs access to
- the negotiated protocol version, and
- the status of the encrypt-then-MAC extension.
This commit moves these two fields into `ssl_transform` and
changes the signature of `ssl_encrypt_buf` to only use an instance
of `ssl_transform` and an instance of the new `ssl_record` type.
The `ssl_context` instance is *solely* kept for the debugging macros
which need an SSL context instance.
The benefit of the change is twofold:
1) It avoids the need of the MPS to deal with instances of
`ssl_context`. The MPS should only work with records and
opaque security parameters, which is what the change in
this commit makes progress towards.
2) It significantly eases testing of the encryption function:
independent of any SSL context, the encryption function can
be passed some record buffer to encrypt alongside some arbitrary
choice of parameters, and e.g. be checked to not overflow the
provided memory.
This commit adds a structure `mbedtls_record` whose instances
represent (D)TLS records. This structure will be used in the
subsequent adaptions of the record encryption and decryption
routines `ssl_decrypt_buf` and `ssl_encrypt_buf`, which currently
take the entire SSL context as input, but should only use the
record to be acted on as well as the record transformation to use.
The macro constant `MBEDTLS_SSL_MAC_ADD` defined in `ssl_internal.h`
defines an upper bound for the amount of space needed for the record
authentication tag. Its definition distinguishes between the
presence of an ARC4 or CBC ciphersuite suite, in which case the maximum
size of an enabled SHA digest is used; otherwise, `MBEDTLS_SSL_MAC_ADD`
is set to 16 to accomodate AEAD authentication tags.
This assignment has a flaw in the situation where confidentiality is
not needed and the NULL cipher is in use. In this case, the
authentication tag also uses a SHA digest, but the definition of
`MBEDTLS_SSL_MAC_ADD` doesn't guarantee enough space.
The present commit fixes this by distinguishing between the presence
of *some* ciphersuite using a MAC, including those using a NULL cipher.
For that, the previously internal macro `SSL_SOME_MODES_USE_MAC` from
`ssl_tls.c` is renamed and moved to the public macro
`MBEDTLS_SOME_MODES_USE_MAC` defined in `ssl_internal.h`.
Prior to this commit, the security parameter struct `ssl_transform`
contained a `ciphersuite_info` field pointing to the information
structure for the negotiated ciphersuite. However, the only
information extracted from that structure that was used in the core
encryption and decryption functions `ssl_encrypt_buf`/`ssl_decrypt_buf`
was the authentication tag length in case of an AEAD cipher.
The present commit removes the `ciphersuite_info` field from the
`ssl_transform` structure and adds an explicit `taglen` field
for AEAD authentication tag length.
This is in accordance with the principle that the `ssl_transform`
structure should contain the raw parameters needed for the record
encryption and decryption functions to work, but not the higher-level
information that gave rise to them. For example, the `ssl_transform`
structure implicitly contains the encryption/decryption keys within
their cipher contexts, but it doesn't contain the SSL master or
premaster secrets. Likewise, it contains an explicit `maclen`, while
the status of the 'Truncated HMAC' extension -- which determines the
value of `maclen` when the `ssl_transform` structure is created in
`ssl_derive_keys` -- is not contained in `ssl_transform`.
The `ciphersuite_info` pointer was used in other places outside
the encryption/decryption functions during the handshake, and for
these functions to work, this commit adds a `ciphersuite_info` pointer
field to the handshake-local `ssl_handshake_params` structure.
The `ssl_transform` security parameter structure contains opaque
cipher contexts for use by the record encryption/decryption functions
`ssl_decrypt_buf`/`ssl_encrypt_buf`, while the underlying key material
is configured once in `ssl_derive_keys` and is not explicitly dealt with
anymore afterwards. In particular, the key length is not needed
explicitly by the encryption/decryption functions but is nonetheless
stored in an explicit yet superfluous `keylen` field in `ssl_transform`.
This commit removes this field.
Previously, GCM required enabling either AES or Camellia. However, we
also support using GCM with ARIA and without other ciphers. Enable
configurations with only ARIA enabled to use GCM.
Make maintaining config files easier by removing any explicit
ciphersuite lists. These explicit lists are prone to being incomplete as
TLS defines more and more ciphersuites. Rather than try to play catch
up, let's refer to sets of ciphersuites with declarative language.
We've removed all software that depends on or uses the TLS, NET, and
X.509 modules. This means TLS, NET, and X.509 are unused and can be
removed. Remove TLS, NET, and X.509.
Remove TLS and NET options from config files and scripts.
Note that this fails check-names.sh because options that TLS and NET
files use are no longer present in config.h.
Types and functions that are not used in the attribute-based key
creation API are now implementation-specific extensions, kept around
until we finish transitioning to the new API.
Implement attribute querying.
Test attribute getters and setters. Use psa_get_key_attributes instead
of the deprecated functions psa_get_key_policy or
psa_get_key_information in most tests.
Implement the new, attribute-based psa_import_key and some basic
functions to access psa_key_attributes_t. Replace
psa_import_key_to_handle by psa_import_key in a few test functions.
This commit does not handle persistence attributes yet.
This commit starts a migration to a new interface for key creation.
Today, the application allocates a handle, then fills its metadata,
and finally injects key material. The new interface fills metadata
into a temporary structure, and a handle is allocated at the same time
it gets filled with both metadata and key material.
This commit was obtained by moving the declaration of the old-style
functions to crypto_extra.h and renaming them with the to_handle
suffix, adding declarations for the new-style functions in crypto.h
under their new name, and running
perl -i -pe 's/\bpsa_(import|copy|generator_import|generate)_key\b/$&_to_handle/g' library/*.c tests/suites/*.function programs/psa/*.c
perl -i -pe 's/\bpsa_get_key_lifetime\b/$&_from_handle/g' library/*.c tests/suites/*.function programs/psa/*.c
Many functions that are specific to the old interface, and which will
not remain under the same name with the new interface, are still in
crypto.h for now.
All functional tests should still pass. The documentation may have
some broken links.
This gives a little more room to encode key agreement algorithms,
while keeping enough space for key derivation algorithms.
This doesn't affect any of the already-defined algorithms.
Merge Mbed TLS at f790a6cbee into Mbed Crypto.
Resolve conflicts by performing the following:
- Reject changes to README.md
- Don't add crypto as a submodule
- Remove test/ssl_cert_test from programs/Makefile
- Add cipher.nist_kw test to tests/CMakeLists.txt
- Reject removal of crypto-specific all.sh tests
- Reject update to SSL-specific portion of component_test_valgrind
in all.sh
- Reject addition of ssl-opt.sh testing to component_test_m32_o1 in
all.sh
* tls/development: (87 commits)
Call mbedtls_cipher_free() to reset a cipher context
Don't call mbedtls_cipher_setkey twice
Update crypto submodule
Minor fixes in get certificate policies oid test
Add certificate policy oid x509 extension
cpp_dummy_build: Add missing header psa_util.h
Clarify comment mangled by an earlier refactoring
Add an "out-of-box" component
Run ssl-opt.sh on 32-bit runtime
Don't use debug level 1 for informational messages
Skip uncritical unsupported extensions
Give credit to OSS-Fuzz for #2404
all.sh: remove component_test_new_ecdh_context
Remove crypto-only related components from all.sh
Remove ssl_cert_test sample app
Make CRT callback tests more robust
Rename constant in client2.c
Document and test flags in x509_verify
Fix style issues and a typo
Fix a rebase error
...
Resolve conflicts by performing the following:
- Ensure calls to mbedtls_x509_crt_verify_* are made with callbacks
* origin/pr/2539:
Make CRT callback tests more robust
Rename constant in client2.c
Fix typo
Add test for configuration specific CRT callback
Fix doxygen documentation of mbedtls_ssl_set_verify()
Add test exercising context-specific CRT callback to ssl-opt.sh
Add cmd to use context-specific CRT callback in ssl_client2
Implement context-specific verification callbacks
Add context-specific CRT verification callbacks
Improve documentation of mbedtls_ssl_conf_verify()
* origin/pr/2532: (29 commits)
Document and test flags in x509_verify
Fix style issues and a typo
Fix name to function call
Address comments for x509 tests
Address review comments regarding ssl_client2 and ssl tests
Remove mbedtls_ from the static function name
Change docs according to review comments
Change the verify function naming
Fix ssl_client2 and ssl_server2 if !PLATFORM_C
Correct placement of usage macro in ssl_client2
Update version_features.c
Remove trailing whitespace in test_suite_x509parse.function
Update query_config.c
Add ssl-opt.sh tests for trusted CA callbacks
Only run X.509 CRT verification tests with CA callback tests if !CRL
Minor fixes to CA callback tests
Declare CA callback type even if feature is disabled
Implement X.509 CRT verification using CA callback
Add prototype for CRT verification with static and dynamic CA list
Make use of CA callback if present when verifying peer CRT chain
...
Merge the Mbed Crypto development branch a little after
mbedcrypto-1.0.0 into the PSA Crypto API 1.0 beta branch a little
after beta 2.
Summary of merge conflicts:
* Some features (psa_copy_key, public key format without
SubjectPublicKeyInfo wrapping) went into both sides, but with a few
improvements on the implementation side. For those, take the
implementation side.
* The key derivation API changed considerably on the API side. This
merge commit generally goes with the updated API except in the tests
where it keeps some aspects of the implementation.
Due to the divergence between the two branches on key derivation and
key agreement, test_suite_psa_crypto does not compile. This will be
resolved in subsequent commits.
Resolve conflicts actions:
- Reject path changes to config.h
- Reject submodule-related changes in build scripts (Makefile,
CMakeLists.txt)
- Add oid test suite to list of tests in tests/CMakeLists.txt,
rejecting any test filtering related changes (which TLS uses to avoid
duplicating crypto tests)
- Add legacy ECDH test to all.sh without including
all.sh tests that depend on SSL
This commit applies the documentation improvements noticed and applied
while adding the documentation for the new X.509 CRT verification API
mbedtls_x509_crt_verify_with_cb() to the existing verification APIs.
* restricted/pr/551:
ECP: Clarify test descriptions
ECP: remove extra whitespaces
Fix ECDH secret export for Mongomery curves
Improve ECP test names
Make ecp_get_type public
Add more tests for ecp_read_key
ECP: Catch unsupported import/export
Improve documentation of mbedtls_ecp_read_key
Fix typo in ECP module
Remove unnecessary cast from ECP test
Improve mbedtls_ecp_point_read_binary tests
Add Montgomery points to ecp_point_write_binary
ECDH: Add test vectors for Curve25519
Add little endian export to Bignum
Add mbedtls_ecp_read_key
Add Montgomery points to ecp_point_read_binary
Add little endian import to Bignum
Ensure this merge passes tests by auto-generating query_config.c, adding
MBEDTLS_ECDH_LEGACY_CONTEXT to it.
* restricted/pr/552:
Fix mbedtls_ecdh_get_params with new ECDH context
Test undefining MBEDTLS_ECDH_LEGACY_CONTEXT in all.sh
Define MBEDTLS_ECDH_LEGACY_CONTEXT in config.h
Add changelog entry for mbedtls_ecdh_get_params robustness
Fix ecdh_get_params with mismatching group
Add test case for ecdh_get_params with mismatching group
Add test case for ecdh_calc_secret
Fix typo in documentation
Ensure tests pass when the submodule is used by updating the list of
crypto tests to include test_suite_oid in both tests/CMakeLists.txt and
tests/Makefile.
* origin/pr/2531:
Add changeLog entry
Add certificate policy of type any policy id
* origin/pr/2509:
all.sh: Generate seedfile for crypto submodule tests
Update crypto submodule to test with private headers
tests: Use globbing in test suite exclusion list
Update crypto submodule to Mbed Crypto development
tests: Test crypto via the crypto submodule
Update the crypto submodule to the top of the Mbed Crypto development
branch. This brings in a version of Mbed Crypto that enables building
Mbed Crypto tests that depend on private headers, like
'psa_crypto_invasive.h'.
This also requires updating our config.h to include new configuration
options added to Mbed Crypto. MBEDTLS_PSA_ITS_FILE_C replaces
MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C and MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C.
MBEDTLS_PSA_INJECT_ENTROPY replaces MBEDTLS_PSA_HAS_ITS_IO.
MBEDTLS_PSA_HAS_ITS_IO is not really useful since it doesn't actually
enable anything except the entropy seed file support, which only
requires the ITS interface and not a native implemetation. Remove it.
Since the ITS API has stabilized and we don't plan to make use of more
than ITS, we don't need an abstraction layer between key storage and
key storage over ITS. Merge the ITS code into the generic storage
module.
Now that we have ITS over files, we no longer need a direct backend
for key storage over files. Remove psa_crypto_storage_file and its
tests.
Switch MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C and MBEDTLS_PSA_ITS_FILE_C on
by default. This preserves functionality and test coverage in the
default configuration, but forgets any key previously stored using the
file backend.
For DH, ECC (Weierstrass curves) and DSA, specify that the re-drawing
method is the one defined by NIST as
"key-pair generation by testing candidates", and describe it
unambiguously.
Also specify DES explicitly.
Doxygen will fail to build if we have references to files that don't
exist. Since we are planning on removing X.509 soon, we even need to
remove explicit Doxygen references to X.509 things as those will no
longer resolve once the X.509 files are deleted.
fixup! asn1: Remove dependency on X.509
psa_generator_import_key() was only specified for "symmetric keys",
and there were some mistakes in the specification. Rewrite the
specification and extend it to other key types.
* For most private key types, specify that the function draws a byte
string repeatedly until the byte string is suitable.
* For DES, despite being a symmetric key type, re-drawing is
necessary.
* For Montgomery curves, despite being asymmetric, no re-drawing is
necessary.
* Specify the behavior for every standard key type other than RSA.
An implementation doesn't have to support all key types, but if it
does, it's better to have a standard.
* origin/development: (113 commits)
Update query_config.c
Fix failure in SSLv3 per-version suites test
Adjust DES exclude lists in test scripts
Clarify 3DES changes in ChangeLog
Fix documentation for 3DES removal
Exclude 3DES tests in test scripts
Fix wording of ChangeLog and 3DES_REMOVE docs
Reduce priority of 3DES ciphersuites
Fix unused variable warning in ssl_parse_certificate_coordinate()
Update the crypto submodule to a78c958
Fix ChangeLog entry to correct release version
Fix typo in x509write test data
Add ChangeLog entry for unused bits in bitstrings
Improve docs for named bitstrings and their usage
Add tests for (named) bitstring to suite_asn1write
Add new function mbedtls_asn1_write_named_bitstring()
Add missing compile time guard in ssl_client2
Update programs/ssl/query_config.c
ssl_client2: Reset peer CRT info string on reconnect
Add further debug statements on assertion failures
...
* public/pr/2421: (68 commits)
Fix unused variable warning in ssl_parse_certificate_coordinate()
Add missing compile time guard in ssl_client2
Update programs/ssl/query_config.c
ssl_client2: Reset peer CRT info string on reconnect
Add further debug statements on assertion failures
Fix typo in documentation of ssl_parse_certificate_chain()
Add debug output in case of assertion failure
Fix typo in SSL ticket documentation
Add config sanity check for !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
ssl_client2: Zeroize peer CRT info buffer when reconnecting
Reintroduce numerous ssl-opt.sh tests if !MBEDTLS_SSL_KEEP_PEER_CERT
ssl_client2: Extract peer CRT info from verification callback
Improve documentation of mbedtls_ssl_get_peer_cert()
Improve documentation of MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
Fix indentation of Doxygen comment in ssl_internal.h
Set peer CRT length only after successful allocation
Remove question in comment about verify flags on cli vs. server
Remove misleading and redundant guard around restartable ECC field
Add test for !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE to all.sh
Free peer CRT chain immediately after verifying it
...
* restricted/pr/528:
Update query_config.c
Fix failure in SSLv3 per-version suites test
Adjust DES exclude lists in test scripts
Clarify 3DES changes in ChangeLog
Fix documentation for 3DES removal
Exclude 3DES tests in test scripts
Fix wording of ChangeLog and 3DES_REMOVE docs
Reduce priority of 3DES ciphersuites
* public/pr/2028:
Update the crypto submodule to a78c958
Fix ChangeLog entry to correct release version
Fix typo in x509write test data
Add ChangeLog entry for unused bits in bitstrings
Improve docs for named bitstrings and their usage
Add tests for (named) bitstring to suite_asn1write
Add new function mbedtls_asn1_write_named_bitstring()
Add a new function mbedtls_asn1_write_named_bitstring() that removes
trailing 0s at the end of DER encoded bitstrings. The function is
implemented according to Hanno Becker's suggestions.
This commit also changes the functions x509write_crt_set_ns_cert_type
and crt_set_key_usage to call the new function as the use named
bitstrings instead of the regular bitstrings.
Additional work done as part of merge:
- Run ./tests/scripts/check-generated-files.sh and check in the
resulting changes to programs/ssl/query_config.c
The ecp_get_type function comes handy in higher level modules and tests
as well. It is not inline anymore, to enable alternative implementations
to implement it for themselves.
mbedtls_ecp_read_key() module returned without an error even when
importing keys corresponding to the requested group was not
implemented.
We change this and return an error when the requested group is not
supported and make the remaining import/export functions more robust.
`MBEDTLS_SSL__ECP_RESTARTABLE` is only defined if
`MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED` is set, which
requires `MBEDTLS_X509_PARSE_C` to be set (this is checked
in `check_config.`). The additional `MBEDTLS_X509_PARSE_C`
guard around the `ecrs_peer_cert` field is therefore not
necessary; moreover, it's misleading, because it hasn't
been used consistently throughout the code.
When removing the (session-local) copy of the peer's CRT chain, we must
keep a handshake-local copy of the peer's public key, as (naturally) every
key exchange will make use of that public key at some point to verify that
the peer actually owns the corresponding private key (e.g., verify signatures
from ServerKeyExchange or CertificateVerify, or encrypt a PMS in a RSA-based
exchange, or extract static (EC)DH parameters).
This commit adds a PK context field `peer_pubkey` to the handshake parameter
structure `mbedtls_handshake_params_init()` and adapts the init and free
functions accordingly. It does not yet make actual use of the new field.
This commit adds an ASN.1 buffer field `pk_raw` to `mbedtls_x509_crt`
which stores the bounds of the raw public key data within an X.509 CRT.
This will be useful in subsequent commits to extract the peer's public
key from its certificate chain.
`mbedtls_ssl_parse_certificate()` parses the peer's certificate chain
directly into the `peer_cert` field of the `mbedtls_ssl_session`
structure being established. To allow to optionally remove this field
from the session structure, this commit changes this to parse the peer's
chain into a local variable instead first, which can then either be freed
after CRT verification - in case the chain should not be stored - or
mapped to the `peer_cert` if it should be kept. For now, only the latter
is implemented.
A subsequent commit will need this function in the session ticket
and session cache implementations. As the latter are server-side,
this commit also removes the MBEDTLS_SSL_CLI_C guard.
For now, the function is declared in ssl_internal.h and hence not
part of the public API.
This commit introduces a static helper function
`mbedtls_ssl_ciphersuite_uses_srv_cert()`
which determines whether a ciphersuite may make use of server-side CRTs.
This function is in turn uses in `mbedtls_ssl_parse_certificate()` to
skip certificate parsing for ciphersuites which don't involve CRTs.
Note: Ciphersuites not using server-side CRTs don't allow client-side CRTs
either, so it is safe to guard `mbedtls_ssl_{parse/write}_certificate()`
this way.
Note: Previously, the code uses a positive check over the suites
- MBEDTLS_KEY_EXCHANGE_PSK
- MBEDTLS_KEY_EXCHANGE_DHE_PSK
- MBEDTLS_KEY_EXCHANGE_ECDHE_PSK
- MBEDTLS_KEY_EXCHANGE_ECJPAKE,
while now, it uses a negative check over `mbedtls_ssl_ciphersuite_uses_srv_cert()`,
which checks for the suites
- MBEDTLS_KEY_EXCHANGE_RSA
- MBEDTLS_KEY_EXCHANGE_RSA_PSK
- MBEDTLS_KEY_EXCHANGE_DHE_RSA
- MBEDTLS_KEY_EXCHANGE_ECDH_RSA
- MBEDTLS_KEY_EXCHANGE_ECDHE_RSA
- MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA
- MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
This is equivalent since, together, those are all ciphersuites.
Quoting ssl_ciphersuites.h:
```
typedef enum {
MBEDTLS_KEY_EXCHANGE_NONE = 0,
MBEDTLS_KEY_EXCHANGE_RSA,
MBEDTLS_KEY_EXCHANGE_DHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA,
MBEDTLS_KEY_EXCHANGE_PSK,
MBEDTLS_KEY_EXCHANGE_DHE_PSK,
MBEDTLS_KEY_EXCHANGE_RSA_PSK,
MBEDTLS_KEY_EXCHANGE_ECDHE_PSK,
MBEDTLS_KEY_EXCHANGE_ECDH_RSA,
MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA,
MBEDTLS_KEY_EXCHANGE_ECJPAKE,
} mbedtls_key_exchange_type_t;
```
crypto_extra.h has a dependency on platform_util.h for
MBEDTLS_DEPRECATED_NUMERIC_CONSTANT. Make the dependency explicit by
including platform_util.h. Although in most use cases the header should
already be included by something else, it doesn't hurt to include it
again and helps to clarify dependencies.
The function `mbedtls_mpi_write_binary()` writes big endian byte order,
but we need to be able to write little endian in some caseses. (For
example when handling keys corresponding to Montgomery curves.)
Used `echo xx | tac -rs ..` to transform the test data to little endian.
The private keys used in ECDH differ in the case of Weierstrass and
Montgomery curves. They have different constraints, the former is based
on big endian, the latter little endian byte order. The fundamental
approach is different too:
- Weierstrass keys have to be in the right interval, otherwise they are
rejected.
- Any byte array of the right size is a valid Montgomery key and it
needs to be masked before interpreting it as a number.
Historically it was sufficient to use mbedtls_mpi_read_binary() to read
private keys, but as a preparation to improve support for Montgomery
curves we add mbedtls_ecp_read_key() to enable uniform treatment of EC
keys.
For the masking the `mbedtls_mpi_set_bit()` function is used. This is
suboptimal but seems to provide the best trade-off at this time.
Alternatives considered:
- Making a copy of the input buffer (less efficient)
- removing the `const` constraint from the input buffer (breaks the api
and makes it less user friendly)
- applying the mask directly to the limbs (violates the api between the
modules and creates and unwanted dependency)
The function `mbedtls_mpi_read_binary()` expects big endian byte order,
but we need to be able to read from little endian in some caseses. (For
example when handling keys corresponding to Montgomery curves.)
Used `echo xx | tac -rs .. | tr [a-z] [A-Z]` to transform the test data
to little endian and `echo "ibase=16;xx" | bc` to convert to decimal.
Define MBEDTLS_ECDH_LEGACY_CONTEXT in config.h instead of hard-coding
this in ecdh.h so that its absence can be tested. Document it as
experimental so that we reserve the right to change it in the future.
When building for the PSA crypto service (defined(PSA_CRYPTO_SECURE)),
define psa_key_owner_id_t as int32_t, which is how a PSA platform
encodes partition identity. Note that this only takes effect when the
build option MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is active.
Support this configuration in the ITS backend.
Declare the owner as psa_key_owner_id_t, of which an implementation
must be provided separately.
Make this a configuration option
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER, to make the conditional
compilation flow easier to follow. Declare it in config.h to
pacify check_names.sh.
Support for a specific implementation of psa_key_owner_id_t in storage
backends will come in a subsequent commit.
Differentiate between _key identifiers_, which are always `uint32_t`,
and _key file identifiers_, which are platform-dependent. Normally,
the two are the same.
In `psa/crypto_platform.h`, define `psa_app_key_id_t` (which is always
32 bits, the standard key identifier type) and
`psa_key_file_id_t` (which will be different in some service builds).
A subsequent commit will introduce a platform where the two are different.
It would make sense for the function declarations in `psa/crypto.h` to
use `psa_key_file_id_t`. However this file is currently part of the
PSA Crypto API specification, so it must stick to the standard type
`psa_key_id_t`. Hence, as long as the specification and Mbed Crypto
are not separate, use the implementation-specific file
`psa/crypto_platform.h` to define `psa_key_id_t` as `psa_key_file_id_t`.
In the library, systematically use `psa_key_file_id_t`.
perl -i -pe 's/psa_key_id_t/psa_key_file_id_t/g' library/*.[hc]
This commit improves hygiene and formatting of macro definitions
throughout the library. Specifically:
- It adds brackets around parameters to avoid unintended
interpretation of arguments, e.g. due to operator precedence.
- It adds uses of the `do { ... } while( 0 )` idiom for macros that
can be used as commands.
This is the first in a series of commits adding client-side
support for PSA-based ECDHE.
Previously, the state of an ECDHE key agreement was maintained
in the field mbedtls_ssl_handshake_params::ecdh_ctx, of type
::mbedtls_ecdh_context and manipulated through the ECDH API.
The ECDH API will be superseeded by the PSA Crypto API for key
agreement, which needs the following data:
(a) A raw buffer holding the public part of the key agreement
received from our peer.
(b) A key slot holding the private part of the key agreement.
(c) The algorithm to use.
The commit adds fields to ::mbedtls_ssl_handshake_params
representing these three inputs to PSA-based key agreement.
Specifically, it adds a field for the key slot holding the
ECDH private key, a field for the EC curve identifier, and
a buffer holding the peer's public key.
Note: Storing the peer's public key buffer is slightly
inefficient, as one could perform the ECDH computation
as soon as the peer sends its public key, either working
with in-place or using a stack-buffer to reformat the
public key before passing it to PSA. This optimization
is left for a later commit.
PSA spec now defines more generic PSA storage types instead of the ITS
specific ones. This is necessary in order to integrate with
the newer implementation of PSA ITS landing in Mbed OS soon.
Changes include the following:
- psa_status_t replaces psa_its_status_t
- psa_storage_info_t replaces psa_its_info_t
- psa_storage_uid_t replaces psa_its_uid_t
Silence a compiler warning about implicit fallthrough by using a comment
format the compiler understand to mean that the fallthrough is
intentional.
In file included from library/cipher.c:63:0:
include/mbedtls/psa_util.h: In function ‘mbedtls_psa_translate_cipher_mode’:
include/mbedtls/psa_util.h:91:15: error: this statement may fall through [-Werror=implicit-fallthrough=]
if( taglen == 0 )
^
include/mbedtls/psa_util.h:94:9: note: here
default:
^~~~~~~
cc1: all warnings being treated as errors
$ gcc --version
gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Silence a compiler warning about implicit fallthrough by using a comment
format the compiler understand to mean that the fallthrough is
intentional.
In file included from library/cipher.c:63:0:
include/mbedtls/psa_util.h: In function ‘mbedtls_psa_translate_cipher_mode’:
include/mbedtls/psa_util.h:91:15: error: this statement may fall through [-Werror=implicit-fallthrough=]
if( taglen == 0 )
^
include/mbedtls/psa_util.h:94:9: note: here
default:
^~~~~~~
cc1: all warnings being treated as errors
$ gcc --version
gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Resolve conflicts by performing the following.
- Take the upstream Mbed TLS ChangeLog verbatim.
- Reject changes to Makefiles and CMake that are related to using Mbed
Crypto as a submodule. It doesn't make sense to use Mbed Crypto as a
submodule of itself.
- Reject README changes, as Mbed Crypto has its own, different README.
- Reject PSA-related changes to config.h. We don't want to disable the
availability of the PSA Crypto API by default in the Mbed Crypto
config.h.
- Don't inadvertently revert dead code removal in
mbedtls_cipher_write_tag() which was added in f2a7529403 ("Fix
double return statement in cipher.c")
- Where Mbed Crypto already had some MBEDTLS_USE_PSA_CRYPTO code (from
past companion PRs) take the latest version from Mbed TLS which
includes integration with MBEDTLS_CHECK_PARAMS.
- Update the version of the shared library files to match what's
currently present in Mbed TLS.
- Reject removal of testing with PSA from config full tests.
- Resolve conflicts in test tests/suites/helpers.function, where both
Mbed Crypto and Mbed TLS both added documentation for TEST_ASSERT.
Combine text from both documentation efforts.
- Reject adding a submodule of ourselves.
- Reject addition of submodule tests in all.sh.
- Reject addition of submodule to library path in
tests/scripts/run-test-suites.pl.
- Avoid using USE_CRYPTO_SUBMODULE=1 in
component_test_use_psa_crypto_full_cmake_asan() in all.sh.
Context:
The existing API `mbedtls_x509_parse_crt_der()` for parsing DER
encoded X.509 CRTs unconditionally makes creates a copy of the
input buffer in RAM. While this comes at the benefit of easy use,
-- specifically: allowing the user to free or re-use the input
buffer right after the call -- it creates a significant memory
overhead, as the CRT is duplicated in memory (at least temporarily).
This might not be tolerable a resource constrained device.
As a remedy, this commit adds a new X.509 API call
`mbedtls_x509_parse_crt_der_nocopy()`
which has the same signature as `mbedtls_x509_parse_crt_der()`
and almost the same semantics, with one difference: The input
buffer must persist and be unmodified for the lifetime of the
established instance of `mbedtls_x509_crt`, that is, until
`mbedtls_x509_crt_free()` is called.
Resolve incompatibilties in the RSA module where changes made for
parameter validation prevent Mbed Crypto from working. Mbed Crypto
depends on being able to pass zero-length buffers that are NULL to RSA
encryption functions.
This reverts commit 2f660d047d.
The macro PSA_HASH_FINAL_SIZE no longer exists and all instances of it
should be replaced by PSA_HASH_SIZE. Replace all remaining instances of
PSA_HASH_FINAL_SIZE with PSA_HASH_SIZE.
Merge a development version of Mbed TLS 2.16.0 that doesn't have
parameter validation into development.
The following conflicts were resolved:
- Update ChangeLog to include release notes merged from development so
far, with a version of "2.14.0+01b34fb316a5" and release date of
"xxxx-xx-xx" to show this is not a released version, but instead a
snapshot of the development branch equivalent to version of the 2.14.0
with additional commits from the mbedtls/development branch up through
01b34fb316 included. Entries added for unreleased versions of Mbed
Crypto remain at the top of the file for Mbed TLS 2.xx.x.
- Replace the Mbed Crypto version of
mbedtls_rsa_rsaes_pkcs1_v15_decrypt() with the version from Mbed TLS
which fixes timing variations and memory access variations that could
lead to a Bleichenbacher-style padding oracle attack. This will
prevent using psa_asymmetric_decrypt() with zero-length output buffers
until a follow up commit is made to restore this capability.
- In ssl_srv.c, include changes for both the new ECDH interface and
opaque PSK as already added to development previously.
Context: There are two public key writing functions in Mbed TLS. First,
mbedtls_pk_write_pubkey(), which exports a public key in the form of a
SubjectPublicKey structure containing the raw keying material
(for example, EC point coordinates for an EC public key, without
reference to the underlying curve). Secondly, mbedtls_pk_write_pubkey_der(),
which exports a public key in the form of a SubjectPublicKeyInfo structure,
wrapping the SubjectPublicKey structure by additional information
identifying the type of public key (and for ECC, e.g., it'd also contain
the ECC group identifier). The implementation of mbedtls_pk_write_pubkey_der()
calls mbedtls_pk_write_pubkey() first and then adds the corresponding
algorithm identifier wrapper.
Both of these functions need to be provided for PSA-based opaque PK contexts,
based on PSA's public key export function.
Previously, PSA used the SubjectPublicKeyInfo structure as its export format,
so mbedtls_pk_write_pubkey_der() could be easily implemented, while
mbedtls_pk_write_pubkey() would need to trim the output of the PSA export.
The previous implementation of mbedtls_pk_write_pubkey() is not quite right
because it calls PSA export doesn't do any trimming, hence exporting the large
SubjectPublicKeyInfo structure instead of the small SubjectPublicKey.
mbedtls_pk_write_pubkey_der(), in turn, immediately returns after calling
mbedtls_pk_write_pubkey(), hence also returning the SubjectPublicKeyInfo
structure, which is correct.
By now, the PSA public key export format has changed to the smaller
SubjectPublicKey structure. This means that, now, mbedtls_pk_write_pubkey()
can be implemented by just calling the PSA export, and that
mbedtls_pk_write_pubkey_der() needs to add the algorithm information around
it, just as in the other types of PK contexts. While not correct for the
old format, the existing code for mbedtls_pk_write_pubkey() is therefore
correct for the new PSA public key format, and needs no change apart from
the missing pointer shift in the last commit.
The implementation of mbedtls_pk_write_pubkey_der() needs a special code
path for PSA-based opaque PK contexts, as the PK context only contains
the PSA key handle, and the PSA API needs to be used to extract the
underlying EC curve to be able to write the AlgorithmParameter structure
that's part of the SubjectPublicKeyInfo structure.
That's what this commit does, (hopefully) making both
mbedtls_pk_write_pubkey() and mbedtls_pk_write_pubkey_der() export
the correctly formatted public key based on the new PSA public key format.
Context: There are two public key writing functions in Mbed TLS. First,
mbedtls_pk_write_pubkey(), which exports a public key in the form of a
SubjectPublicKey structure containing the raw keying material
(for example, EC point coordinates for an EC public key, without
reference to the underlying curve). Secondly, mbedtls_pk_write_pubkey_der(),
which exports a public key in the form of a SubjectPublicKeyInfo structure,
wrapping the SubjectPublicKey structure by additional information
identifying the type of public key (and for ECC, e.g., it'd also contain
the ECC group identifier). The implementation of mbedtls_pk_write_pubkey_der()
calls mbedtls_pk_write_pubkey() first and then adds the corresponding
algorithm identifier wrapper.
Both of these functions need to be provided for PSA-based opaque PK contexts,
based on PSA's public key export function.
Previously, PSA used the SubjectPublicKeyInfo structure as its export format,
so mbedtls_pk_write_pubkey_der() could be easily implemented, while
mbedtls_pk_write_pubkey() would need to trim the output of the PSA export.
The previous implementation of mbedtls_pk_write_pubkey() is not quite right
because it calls PSA export doesn't do any trimming, hence exporting the large
SubjectPublicKeyInfo structure instead of the small SubjectPublicKey.
mbedtls_pk_write_pubkey_der(), in turn, immediately returns after calling
mbedtls_pk_write_pubkey(), hence also returning the SubjectPublicKeyInfo
structure, which is correct.
By now, the PSA public key export format has changed to the smaller
SubjectPublicKey structure. This means that, now, mbedtls_pk_write_pubkey()
can be implemented by just calling the PSA export, and that
mbedtls_pk_write_pubkey_der() needs to add the algorithm information around
it, just as in the other types of PK contexts. While not correct for the
old format, the existing code for mbedtls_pk_write_pubkey() is therefore
correct for the new PSA public key format, and needs no change apart from
the missing pointer shift in the last commit.
The implementation of mbedtls_pk_write_pubkey_der() needs a special code
path for PSA-based opaque PK contexts, as the PK context only contains
the PSA key handle, and the PSA API needs to be used to extract the
underlying EC curve to be able to write the AlgorithmParameter structure
that's part of the SubjectPublicKeyInfo structure.
That's what this commit does, (hopefully) making both
mbedtls_pk_write_pubkey() and mbedtls_pk_write_pubkey_der() export
the correctly formatted public key based on the new PSA public key format.
Additional changes to temporarily enable running tests:
ssl_srv.c and test_suite_ecdh use mbedtls_ecp_group_load instead of
mbedtls_ecdh_setup
test_suite_ctr_drbg uses mbedtls_ctr_drbg_update instead of
mbedtls_ctr_drbg_update_ret
