- Replace calls to config.py for MAX_IN_LEN and MAX_OUT_LEN with
`get_config_value_or_default`
- Remove hard exit when MAX_IN/OUT_LEN < 4096, replace with
`requires_config_value_at_least`
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
Restore the optimization done in
HEAD^{/Speed up the generation of storage format test cases}
which was lost during refactoring made when adding support for
implicit usage flags.
There are still more than one call to the C compiler, but the extra
calls are only for some key usage test cases.
This is an internal refactoring. This commit does not change the
output of generate_psa_tests.py
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In order to for tests to pass from the previous commit (which it mandatory for all pk verify/sign
functions to be given a hash_len that is exactly equal to the message digest length of md_alg) the
hash_len that is supplied to the fucntion cannot be MBEDTLS_MD_MAX_SIZE. This would result in all tests failing. Since the md alg for all of these funtions are SHA256, we can use mbedtls functions to get
the required length of a SHA256 digest (32 bytes). Then that number can be used for allocating the
hash buffer.
Signed-off-by: Nick Child <nick.child@ibm.com>
It is enough only one test case for a key type, algorithm pair when
testing the implicit usage flags.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Add test cases validating that if a stored key only had the hash policy,
then after loading it psa_get_key_attributes reports that it also has the
message policy, and the key can be used with message functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Negative x coordinate was tested with the value -1. It happens to be one
of the low order points both for Curve25519 and Curve448 and might be
rejected because of that and not because it is negative. Make sure that
x < 0 is the only plausible reason for the point to be rejected.
Signed-off-by: Janos Follath <janos.follath@arm.com>
A test case for which the loop would take practically forever if it was
reached. The point would be to validate that the loop is not reached.
The test case should cause the CI to time out if starting with the
current code, ecp_check_pubkey_mx() was changed to call
ecp_check_pubkey_x25519() first and run the mbedtls_mpi_size(() test
afterwards, which would make no semantic difference in terms of memory
contents when the function returns, but would open the way for a DoS.
Signed-off-by: Janos Follath <janos.follath@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Backport 2.x: Fix and test the MBEDTLS_PSA_CRYPTO_SPM build
Straightforward backport from development to developement_2.x plus one trivial commit, only one approval is enough.
Modify tests to test mbedtls_psa_cipher_operation_t,
mbedtls_transparent_test_driver_cipher_operation_t and
mbedtls_opaque_test_driver_cipher_operation_t struct initialization macros.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Tests for psa_cipher_encrypt and psa_cipher_decrypt functions.
The psa_cipher_encrypt function takes no parameter for IV and always generates
it therefore there will be a randomness in the calculation and cannot be
validated by comparing the actual output with the expected output.
The function is tested by:
- doing a prtially randomized test with an encryption then a decryption
and validating the input with output of the decryption
- validating against the multipart encryption
The combination of this two methods provides enough coverage like a
known answer test.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Various functions for PSA hash operations call abort
on failure; test that this is done. The PSA spec does not require
this behaviour, but it makes our implementation more robust in
case the user does not abort the operation as required by the
PSA spec.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Remove late binding of iterators to enable the creation of an object
with an actual state of a variable.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Various functions for PSA cipher and mac operations call abort
on failure; test that this is done. The PSA spec does not require
this behaviour, but it makes our implementation more robust in
case the user does not abort the operation as required by the
PSA spec.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
The cipher_bad_order test happened to pass, but was not testing the
failure case it intended to test.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Tests for psa_mac_compute and psa_mac_verify functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Hash and sign algorithms require the alignment of the input length with
the hash length at verification as well not just when signing.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The psa_verify_hash() is the pre-hashed version of the API and supposed
to work on hashes generated by the user. There were tests passing that
were getting "hashes" of sizes different from the expected.
Transform these into properly failing tests.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Fix a bug introduced in "Fix multiplication producing a negative zero" that
caused the sign to be forced to +1 when A > 0, B < 0 and B's low-order limb
is 0.
Add a non-regression test. More generally, systematically test combinations
of leading zeros, trailing zeros and signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
No need to bypass the API to fill limbs. It's a better test to just
set the top bit that we want to have set, and it's one less bypass of
the API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mbedtls_mpi_read_string, if the string is empty, return an empty bignum
rather than a bignum with one limb with the value 0.
Both representations are correct, so this is not, in principle, a
user-visible change. The change does leak however through
mbedtls_mpi_write_string in base 16 (but not in other bases), as it writes a
bignum with 0 limbs as "" but a bignum with the value 0 and at least one
limb as "00".
This change makes it possible to construct an empty bignum through
mbedtls_mpi_read_string, which is especially useful to construct test
cases (a common use of mbedtls_mpi_read_string, as most formats use in
production encode numbers in binary, to be read with mbedtls_mpi_read_binary
or mbedtls_mpi_read_binary_le).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix mbedtls_mpi_mul_mpi() when one of the operands is zero and the
other is negative. The sign of the result must be 1, since some
library functions do not treat {-1, 0, NULL} or {-1, n, {0}} as
representing the value 0.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference in mbedtls_mpi_exp_mod(X, A, N, E, _RR) when
A is the value 0 represented with 0 limbs.
Make the code a little more robust against similar bugs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test both 0 represented with 0 limbs ("0 (null)") and 0 represented
with 1 limb ("0 (1 limb)"), because occasionally there are bugs with
0-limb bignums and occasionally there are bugs with removing leading
zero limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_exp_mod can be called in three ways regarding the speed-up
parameter _RR: null (unused), zero (will be updated), nonzero (will be
used). Systematically test all three.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the RR parameter to the mbedtls_mpi_exp_mod test function.
It was never used in the test data, so there is no loss of functionality.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test mbedtls_mpi_safe_cond_assign() and mbedtls_mpi_safe_cond_swap()
with their "unsafe" counterparts mbedtls_mpi_copy() and
mbedtls_mpi_swap(). This way we don't need to repeat the coverage of
test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Similarly to "Overhaul testing of mbedtls_mpi_copy", simplify the code
to test mbedtls_mpi_swap to have just one function for distinct MPIs
and one function for swapping an MPI with itself, covering all cases
of size (0, 1, >1) and sign (>0, <0).
The test cases are exactly the same as for mbedtls_mpi_copy with the
following replacements:
* `Copy` -> `Swap`
* ` to ` -> ` with `
* `_copy` -> `_swap`
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace the two test functions mbedtls_mpi_copy_sint (supporting signed
inputs but always with exactly one limb) and mbedtls_mpi_copy_binary
(supporting arbitrary-sized inputs but not negative inputs) by a single
function that supports both arbitrary-sized inputs and arbitrary-signed
inputs. This will allows testing combinations like negative source and
zero-sized destination.
Also generalize mpi_copy_self to support arbitrary inputs.
Generate a new list of test cases systematically enumerating all
possibilities among various categories: zero with 0 or 1 limb, negative or
positive with 1 limb, negative or positive with >1 limb. I used the
following Perl script:
```
sub rhs { $_ = $_[0]; s/bead/beef/; s/ca5cadedb01dfaceacc01ade/face1e55ca11ab1ecab005e5/; $_ }
%v = (
"zero (null)" => "",
"zero (1 limb)" => "0",
"small positive" => "bead",
"large positive" => "ca5cadedb01dfaceacc01ade",
"small negative" => "-bead",
"large negative" => "-ca5cadedb01dfaceacc01ade",
);
foreach $s (sort keys %v) {
foreach $d (sort keys %v) {
printf "Copy %s to %s\nmbedtls_mpi_copy:\"%s\":\"%s\"\n\n",
$s, $d, $v{$s}, rhs($v{$d});
}
}
foreach $s (sort keys %v) {
printf "Copy self: %s\nmpi_copy_self:\"%s\"\n\n", $s, $v{$s};
}
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is mostly to look for cases where the sign bit may have been left at 0
after zerozing memory, or a value of 0 with the sign bit set to -11. Both of
these mostly work fine, so they can go otherwise undetected by unit tests,
but they can break when certain combinations of functions are used.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace calls to mbedtls_mpi_read_string() with a wrapper
mbedtls_test_read_mpi() when reading test data except for the purpose
of testing mbedtls_mpi_read_string() itself. The wrapper lets the test
data control precisely how many limbs the constructed MPI has.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This test helper reads an MPI from a string and guarantees control over the
number of limbs of the MPI, allowing test cases to construct values with or
without leading zeros, including 0 with 0 limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* development_2.x:
Reword changelog - Test Resource Leak
Fix fd range for select on Windows
Refactor file descriptor checks into a common function
Update changelog formatting - Missing Free Context
Update changelog formatting Missing Free Context
Update changelog formatting - Missing Free Context
Changelog entry for Free Context in test_suite_aes fix
Free context in at the end of aes_crypt_xts_size()
Fix copypasta in test data
Use UNUSED wherever applicable in derive_input tests
Fix missing state check for tls12_prf output
Key derivation: add test cases where the secret is missing
Add bad-workflow key derivation tests
More explicit names for some bad-workflow key derivation tests
in file tests/suite/test_suite_aes.function, aes_crypt_xts_size()
did not free the context upon the function exit.
The function now frees the context on exit.
Fixes#4176
Signed-off-by: JoeSubbiani <Joe.Subbiani@arm.com>
Add HKDF tests where the sequence of inputs differs from the nominal
case: missing step, duplicate step, step out of order, or invalid step.
There were already similar tests for TLS 1.2 PRF. Add one with a key
agreement which has slightly different code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There was already a test case for 0 but with a non-empty representation
(X->n == 1). Add a test case with X->n == 0 (freshly initialized mpi).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Do more iterations with small values. This makes it more likely that a
mistake on bounds will be detected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Slightly simplify is_significantly_above_a_power_of_2() to make it
easier to understand:
* Remove the explicit negative answer for x <= 4. The only functional
difference this makes is that is_significantly_above_a_power_of_2(3)
is now true.
* Shift the most significant bit of x to position 8 rather than 15.
This makes the final comparison easier to explain.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for mbedtls_mpi_fill_random() and mbedtls_mpi_random()
when the resulting MPI object previously had a nonzero value. I wrote
those to catch a bug that I introduced during the development of
mbedtls_mpi_random() (but does not appear in a committed version).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_random() uses mbedtls_mpi_cmp_mpi_ct(), which requires its
two arguments to have the same storage size. This was not the case
when the upper bound passed to mbedtls_mpi_random() had leading zero
limbs.
Fix this by forcing the result MPI to the desired size. Since this is
not what mbedtls_mpi_fill_random() does, don't call it from
mbedtls_mpi_random(), but instead call a new auxiliary function.
Add tests to cover this and other conditions with varying sizes for
the two arguments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values and keys in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted code,
use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_dhm_make_params() with x_size != size of P is not likely to be
useful, but it's supported, so test it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Repeat a few tests that use random data. This way the code is
exercised with a few different random values.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Improve the validation of the output from mbedtls_dhm_make_params:
* Test that the output in the byte buffer matches the value in the
context structure.
* Test that the calculated values are in the desired range.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename mbedtls_ecp_gen_privkey_sw to mbedtls_mpi_random since it has
no particular connection to elliptic curves beyond the fact that its
operation is defined by the deterministic ECDSA specification. This is
a generic function that generates a random MPI between 1 inclusive and
N exclusive.
Slightly generalize the function to accept a different lower bound,
which adds a negligible amount of complexity.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for private key generation on short Weierstrass curves.
These tests validate that the result is within the desired range.
Additionally, they validate that after performing many iterations, the
range is covered to an acceptable extent: for tiny ranges, all values
must be reached; for larger ranges, all value bits must reach both 0
and 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't calculate the bit-size of the initially generated random number.
This is not necessary to reach the desired distribution of private
keys, and creates a (tiny) side channel opportunity.
This changes the way the result is derived from the random number, but
does not affect the resulting distribution.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The library rejected an RNG input of all-bits-zero, which led to the
key 2^{254} (for Curve25519) having a 31/32 chance of being generated
compared to other keys. This had no practical impact because the
probability of non-compliance was 2^{-256}, but needlessly
complicated the code.
The exception was added in 98e28a74e3 to
avoid the case where b - 1 wraps because b is 0. Instead, change the
comparison code to avoid calculating b - 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test the exact output from known RNG input. This is overly
constraining, but ensures that the code has good properties.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If a fallback is not explicitly configured in the
mbedtls_test_rnd_buf_info structure, fail after the buffer is
exhausted.
There is no intended behavior change in this commit: all existing uses
of mbedtls_test_rnd_buffer_rand() have been updated to set
mbedtls_test_rnd_std_rand as the fallback.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION shifts the location
value (location << 8). This can go outside the range of a 32-bit int
if the location value is above 2^23 as is the case here. Asan
rightfully complained about it. Make the value unsigned to avoid the
integer overflow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test keys with various persistence levels, enumerated from the
metadata tests.
For read-only keys, do not attempt to create or destroy the key
through the API, only to read a key that has been injected into
storage directly through filesystem access.
Do not test keys with a non-default location, since they require a
driver and we do not yet have a dependency mechanism to require the
presence of a driver for a specific location value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Attempting to create a key with an invalid location or with read-only
persistence must be rejected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The call to `tests/scripts/generate_psa_tests.py` added by the commit
"generate_psa_tests.py: allow generating each file independently"
assumed that the `check` function supports multiple file names, but in
fact it does not do so. When `generate_psa_tests.py` started generating
more than one file, `check-generated-files.sh` did not detect changes to
files other than the first one listed by `generate_psa_tests.py --list`.
Fix this: change `check` to support either a single directory (with
detection of added/removed files) or a list of files (which is assumed
to be static).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generating expressions to construct test case data, there can be
duplicate values, for example if a value of the form C(A) is present
as such in test_suite_psa_crypto_metadata.data and also constructed by
enumerating the argument A for the constructor C. Eliminate such
duplicates in generate_expressions.
This commit removes many test cases that were exact duplicates (and
were near-duplicates differing only in whitespace before the
whitespace normalization).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In macro_collector.py, base InputsForTest on PSAMacroEnumerator rather
than PSAMacroCollector. It didn't make much sense to use
PSAMacroCollector anymore since InputsForTest didn't use anything
other than the constructor.
psa_generate_tests now generates arguments for more macros.
In particular, it now collects macro arguments from
test_suite_psa_crypto_metadata. Algorithms with parameters are now
supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
First build a list of all keys, then construct all the corresponding
test cases. This allows all required information to be obtained in
one go, which is a significant performance gain as the information
includes numerical values obtained by compiling a C program.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In generate_psa_tests, use InputsForTest rather than PSAMacroCollector
to gather values. This way, the enumeration of values to test includes
values used in metadata tests in addition to constructors parsed from
header files. This allows greater coverage of values built from
constructors with arguments. This doesn't make a difference yet, but
it will once algorithm constructors with arguments are supported in
generate_psa_tests.
Make the injection of numerical values optional. They are useful for
test_psa_constant_names, so keep them there. Don't use them for
not-supported tests: they might make sense, but the current code
wouldn't work since it doesn't know how to make up fake key material
or what dependencies to generate. Don't use them for storage tests:
they only make sense for supported values.
Don't inject 'PSA_SUCCESS': that's superfluous.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
The test "PSA generate key: RSA, 1024 bits, good, encrypt (OAEP
SHA-256)" had a dependency on MBEDTLS_GENPRIME, but this was not listed
in the dependencies. Add MBEDTLS_GENPRIME to the test's dependencies to
ensure it has what it needs to run.
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Fix a pointer mismatch when int32_t is not int, for example on Cortex-M where
in32_t is long int. Fix#4530
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To avoid the MAC tests from being run when only part of the driver
wrappers (not including MAC) are being configured for test.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Update the mbedtls_test_psa_exercise_key to handle and use
PSA_KEY_USAGE_SIGN_MESSAGE and PSA_KEY_USAGE_VERIFY_MESSAGE key policies.
Add new tests for PSA_KEY_USAGE_SIGN_MESSAGE and PSA_KEY_USAGE_VERIFY_MESSAGE
policies.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Modify function and test case names that testing psa_sign_hash and
psa_verify_hash funtions to be less confusing with the newly introduced
function and test case names which tests psa_sign_message and
psa_verify_message functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
The reference output data was created with cryptodome for RSA algorithms and
python-ecdsa for ECDSA algorithms.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Modify function and test case names that testing psa_sign_hash and
psa_verify_hash funtions to be less confusing with the newly introduced
function and test case names which tests psa_sign_message and
psa_verify_message functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
This configuration file was useful in the early days of PSA crypto
development. It stopped becoming relevant when MBEDTLS_PSA_CRYPTO_C entered
the default configuration. Remove it: better late than never.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move the key buffer size calculation code under
tests to avoid check-names.sh to complain about
"likely macros with typos".
This removes the calculation of key buffer
sizes for the test driver from the wrapper based on
static size data. But the code is still there in test
code to be used when we go back to work on the
generation of the driver wrapper.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add implementation for MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
Merging as it has been ready for four days now and I prefer not having to go through other rebases especially given the coming change of scope of development (3.0 rather than 2.2x).
Improve comments explaining error code checking, fix incorrect comments
and make a small formatting fix.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Python 2 is no longer officially supported, but we were still using it
to generate test suite .c files from .function files when using GNU
make. Switch to looking for Python 3.
This change was done for CMake a long time ago.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MSVC doesn't like multiple compilation units with the same name.
(conflict between cipher.c in the library and in the test driver folder)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Leverage the fact that the get_builtin_key entrypoint returns a key's
attributes, such that a proper size for the builtin key's buffer can
be calculated through the driver's get_key_buffer_size hook.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The macro always meant 'location', but was mistakenly named 'lifetime'.
Naming it location instead makes much more sense, and drives home the
conceptual differences between location and lifetime values.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Instead of the full attributes struct, it now only takes/returns what it
actually needs to.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Builtin key support for the test driver is always compiled in, and no
longer guarded by MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS.
Parsing the key slot from the buffer by cast and assign instead of memcmp.
For exporting keys, the test driver no longer reaches into the key
identifier in order to check whether a key is builtin, but rather
assumes so based on the key buffer length. It's the driver's
responsibility to be able to detect the key material it returned as part
of the get_builtin_key operation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Move to its own file in the test tree, to simplify platform vendors
providing their own implementation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
As part of test_psa_crypto_drivers, define a builtin symmetric
plus an ECC key on the test driver lifetime.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Replace all occurences of error code addition in the library with the new
MBEDTLS_ERROR_ADD macro.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Improve documentation by:
- Fixing off by one errors in binary representations of error codes.
- Clarifying combinations of zero.
- Linking references to variables/macros via doxygen.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The previous implementation of the error addition interface did not comply
with the invasive testing architecture guidelines. This commit fixes that
by:
- Renaming functions/macros/variables to follow the mbedtls_error_xxx or
mbedtls_test_hook_xxx convention.
- Making mbedtls_test_hook_error_add a global variable that can be set
by the testing code.
- Using a static inline function call, as opposed to macro, to keep
discrepancies between debug and production version to a minimum.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Although not commonly done, it should be possible to add error codes
together even if the high level error code is equal to zero.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix builds where `MBEDTLS_ERROR_C` is not defined but `MBEDTLS_TEST_HOOKS`
is defined. This was previously causing undefined reference errors in
these builds.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Previously an error message was printed and then the test manually exited
via `mbedtls_exit( 1 )`. This commit includes a rebase onto:
540320bf7b so that `mbedtls_test_fail` can
be used instead to properly fail tests (and report them as such).
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add new checks and specific error messages to `mbedtls_test_err_add_check`.
This should now catch all types of error when combining error codes and
provide a specific error message to explain what occured.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` and error.h are the more logical place to keep this code and it
prevents issues with building `common.c` and conflicts with other projects
that use mbedtls (such as mbedOS).
`error.c` has been automatically generated by first adding the code to
`error.fmt` and then running `./scripts/generate_errors.pl`.
Also add parenthesis to the addition in `MBEDTLS_ERR_ADD`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix building by adding `common.c` to the build scripts (both make and Cmake).
Also reworks the hook function pointer (also renamed to `err_add_hook`) to be
a static local to `common.c` with a setter function to set the pointer to a
checking function.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` is a file generated from `error.h` and thus cannot contain the code
that was previously added. This commit fixes that issue by moving the
`MBEDTLS_ERR_ADD` macro and associated function and function pointer into
`common.h` and `common.c`.
Also fix a typo in `tests/include/test/helpers.h` where tabs were accidentally
used instead of spaces.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`mbedtls_test_err_add_check` was previously incorrectly throwing an error if
both error codes were correct and valid pure error codes. This change fixes
that behaviour to correctly throw errors when invalid combinations are found.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Adds a macro (`MBEDTLS_ERR_ADD`) to add error codes together and check that the
result will not be corrupted. This additional check is only enabled during
testing when `MBEDTLS_TEST_HOOKS` is defined.
Also includes a reference usage example in `rsa.c` where two high-level error
codes could be incorrectly added together under the right conditions. This now
ensures that when this error occurs during testing it will be correctly
reported.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
