Call cleanup from run_component instead of calling it from each
individual component function.
Clean up after each component rather than before. With the new
structure it makes more sense for each component to leave the place
clean. Run cleanup once at the beginning to start from a clean slate.
Move almost all the code of this script into functions. There is no
intended behavior change. The goal of this commit is to make
subsequent improvements easier to follow.
A very large number of lines have been reintended. To see what's going
on, ignore whitespace differences (e.g. diff -w).
I followed the following rules:
* Minimize the amount of code that gets moved.
* Don't change anything to what gets executed or displayed.
* Almost all the code must end up in a function.
* One function does one thing. For most of the code, that's from one
"cleanup" to the next.
* The test sequence functions (run_XXX) are independent.
The change mostly amounts to putting chunks of code into a function
and calling the functions in order. A few test runs are conditional;
in those cases the conditional is around the function call.
Change the way some lines are wrapped to cut at a more logical place.
This commit mainly rewrites multi-line calls to TEST_EQUAL, and also a
few calls to PSA_ASSERT.
This commit is the result of the following command, followed by
reindenting (but not wrapping lines):
perl -00 -i -pe 's/^( *)TEST_ASSERT\(([^;=]*)(?: |\n *)==([^;=]*)\);$/${1}TEST_EQUAL($2,$3);/gm' tests/suites/test_suite_psa_*.function
This commit is the result of the following command, followed by
reindenting (but not wrapping lines):
perl -00 -i -pe 's/^( *)TEST_ASSERT\(([^;=]*)(?: |\n *)==\s*PSA_SUCCESS\s*\);$/${1}PSA_ASSERT($2 );/gm' tests/suites/test_suite_psa_*.function
Cause a compilation error on ARRAY_LENGTH(p) where p is a pointer as
opposed to an array. This only works under GCC and compatible
compilers such as Clang. On other compilers, ARRAY_LENGTH works but
doesn't check the type of its argument.
This commit finishes the removal of support for direct access to key
slots in psa_crypto.c.
This marks the end of the necessary phase of the transition to key
handles. The code should subsequently be refactored to move key slot
management from psa_crypto.c to psa_crypto_slot_management.c.
Switch from the direct use of slot numbers to handles allocated by
psa_allocate_key.
The general principle for each function is:
* Change `psa_key_slot_t slot` to `psa_key_handle_t handle` or
`psa_key_id_t key_id` depending on whether it's used as a handle to
an open slot or as a persistent name for a key.
* Call psa_create_key() before using a slot, instead of calling
psa_set_key_lifetime to make a slot persistent.
Remove the unit test persistent_key_is_configurable which is no longer
relevant.
Switch from the direct use of slot numbers to handles allocated by
psa_allocate_key.
This commit does not affect persistent key tests except for the one
test function in test_suite_psa_crypto that uses persistent keys
(persistent_key_load_key_from_storage).
The general principle for each function is:
* Change `psa_key_slot_t slot` to `psa_key_handle_t handle`.
* Call psa_allocate_key() before setting the policy of the slot,
or before creating key material in functions that don't set a policy.
* Some PSA_ERROR_EMPTY_SLOT errors become PSA_ERROR_INVALID_HANDLE
because there is now a distinction between not having a valid
handle, and having a valid handle to a slot that doesn't contain key
material.
* In tests that use symmetric keys, calculate the max_bits parameters
of psa_allocate_key() from the key data size. In tests where the key
may be asymmetric, call an auxiliary macro KEY_BITS_FROM_DATA which
returns an overapproximation. There's no good way to find a good
value for max_bits with the API, I think the API should be tweaked.
Implement psa_allocate_key, psa_open_key, psa_create_key,
psa_close_key.
Add support for keys designated to handles to psa_get_key_slot, and
thereby to the whole API.
Allocated and non-allocated keys can coexist. This is a temporary
stage in order to transition from the use of direct slot numbers to
allocated handles only. Once all the tests and sample programs have
been migrated to use handles, the implementation will be simplified
and made more robust with support for handles only.
Programs must not include mbedtls/platform.h if MBEDTLS_PLATFORM_C is
not defined. Test suites don't need to include mbedtls/platform.h
because helpers.function takes care of it.
This commit also removes a stray `;` which is technically not standard C.
Add missing compilation guards that broke the build if either GCM or
CCM was not defined.
Add missing guards on test cases that require GCM or CBC.
The build and tests now pass for any subset of {MBEDTLS_CCM_C,
MBEDTLS_GCM_C}. There are still unused variables warnings if neither
is defined.
Write an all-bits-zero NV seed file for the tests. Without this, if
the seed file is not present when this test suite is executed, the
PSA module initialization will fail, causing most test cases to fail.
Also write an all-bits-zero NV seed file at the end. The test cases in
this test suite mess with the file, but subsequent test suites may
need it.
When testing with custom entropy sources, if MBEDTLS_ENTROPY_NV_SEED
is enabled at compile time but the NV seed source is not used at
runtime, mbedtls_entropy_func makes a second pass anyway. Cope with
this in the test code by telling the entropy module not to make this
second pass.
Add a function to configure entropy sources. For testing only.
Use it to test that the library initialization fails properly if there is no
entropy source.
It's better for names in the API to describe the "what" (opaque keys) rather
than the "how" (using PSA), at least since we don't intend to have multiple
function doing the same "what" in different ways in the foreseeable future.
Unfortunately the can_do wrapper does not receive the key context as an
argument, so it cannot check psa_get_key_information(). Later we might want to
change our internal structures to fix this, but for now we'll just restrict
opaque PSA keys to be ECDSA keypairs, as this is the only thing we need for
now. It also simplifies testing a bit (no need to test each key type).
While at it, clarify who's responsible for destroying the underlying key. That
can't be us because some keys cannot be destroyed and we wouldn't know. So
let's leave that up to the caller.
So far, make sure we test the following ciphersuites
without any fallback to non-PSA ciphers:
TLS-ECDHE-ECDSA-WITH-AES-128-CCM
TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8
TLS-ECDHE-ECDSA-WITH-AES-256-CCM
TLS-ECDHE-ECDSA-WITH-AES-256-CCM-8
TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256
TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384
TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA
TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256
TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384
Previously, command line arguments `psk_slot` and `psk_list_slot`
could be used to indicate the PSA key slots that the example
applications should use to store the PSK(s) provided.
This commit changes this approach to use the utility function
`mbedtls_psa_get_free_key_slot()` to obtain free key slots from
the PSA Crypto implementation automatically, so that users only
need to pass boolean flags `psk_opaque` and `psk_list_opaque`
on the command line to enable / disable PSA-based opaque PSKs.
The test suites `test_suite_gcm.aes{128,192,256}_en.data` contains
numerous NIST test vectors for AES-*-GCM against which the GCM
API mbedtls_gcm_xxx() is tested.
However, one level higher at the cipher API, no tests exist which
exercise mbedtls_cipher_auth_{encrypt/decrypt}() for GCM ciphers,
although test_suite_cipher.function contains the test auth_crypt_tv
which does precisely that and is already used e.g. in
test_suite_cipher.ccm.
This commit replicates the test vectors from
test_suite_gcm.aes{128,192,256}_en.data in test_suite_cipher.gcm.data
and adds a run of auth_crypt_tv for each of them.
The conversion was mainly done through the sed command line
```
s/gcm_decrypt_and_verify:\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):
\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\):\([^:]*\)/auth_crypt_tv:
\1:\2:\4:\5:\3:\7:\8:\9/
```
Allow mbedtls_psa_crypto_free to be called twice, or without a prior
call to psa_crypto_init. Keep track of the initialization state more
precisely in psa_crypto_init so that mbedtls_psa_crypto_free knows
what to do.
Allow use of persistent keys, including configuring them, importing and
exporting them, and destroying them.
When getting a slot using psa_get_key_slot, there are 3 scenarios that
can occur if the keys lifetime is persistent:
1. Key type is PSA_KEY_TYPE_NONE, no persistent storage entry:
- The key slot is treated as a standard empty key slot
2. Key type is PSA_KEY_TYPE_NONE, persistent storage entry exists:
- Attempt to load the key from persistent storage
3. Key type is not PSA_KEY_TYPE_NONE:
- As checking persistent storage on every use of the key could
be expensive, the persistent key is assumed to be saved in
persistent storage, the in-memory key is continued to be used.
Add new functions, psa_load_persistent_key(),
psa_free_persistent_key_data(), and psa_save_persistent_key(), for
managing persistent keys. These functions load to or save from our
internal representation of key slots. Serialization is a concern of the
storage backend implementation and doesn't abstraction-leak into the
lifetime management code.
An initial implementation for files is provided. Additional storage
backends can implement this interface for other storage types.
The persistent key implementation will be split across multiple
files as it will eventually be implementing multiple storage
backends. As these internal functions will need to be callable by
other files, we will add the headers in the library folder. This
commit adds this include location to the necessary scripts.
For tests, the library is added as an include location as testing
on-target with Mbed OS is not possible with paths including ".."
This commit adds the default upstream configuration to the set of
tests we run on CI, which was long overdue.
config-default is a copy of the Mbed TLS upstream config.h. It's
useful for two things: to compare our local changes to
include/mbedtls/config.h, and to test that we aren't breaking the
default upstream configuration.
Run a subset of the TLS tests that focus on exercising cryptographic
algorithms as used from TLS. Don't run the full set of TLS tests
because they're unlikely to be affected by changes in the PSA branch.
Mbed TLS version 2.14.0
Resolved conflicts in include/mbedtls/config.h,
tests/scripts/check-files.py, and yotta/create-module.sh by removing yotta.
Resolved conflicts in tests/.jenkins/Jenkinsfile by continuing to run
mbedtls-psa job.
There was no test case of ECDH with anything other than
PSA_ALG_SELECT_RAW. Exercise the code path from ECDH through a
"proper" KDF.
ECDH shared secret copied from an existing test, HKDF output
calculated with Cryptodome.
