fix_negative allocates memory for its result. The calling site didn't
check the return value, so an out-of-memory error could lead to an
incorrect calculation. Fix this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a memory leak in mbedtls_mpi_sub_abs when the output parameter is
aliased to the second operand (X = A - X) and the result is negative.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run all the addition and subtraction tests with the result aliased to
the first operand and with the result aliased to the second operand.
Before, only some of the aliasing possibilities were tested, for only
some of the functions, with only some inputs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fixes an issue where configs that had `MBEDTLS_MPI_MAX_BITS` greater than 256
but smaller than the test that was running (792 bits) the test would fail
incorrectly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Extra whitespace and a missing newline at end of file was causing an error with
`check_files.py`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Move dependancy on `MBEDTLS_MPI_MAX_BITS` to apply to the specific test cases
which will break when `MBEDTLS_MPI_MAX_BITS` is too small. This re-enables
previous tests that were turned off accidentally.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Previously `mbedtls_mpi_exp_mod` was tested with values that were over
`MBEDTLS_MPI_MAX_SIZE` in size. This is useful to do as some paths are only
taken when the exponent is large enough however, on builds where
`MBEDTLS_MPI_MAX_SIZE` is under the size of these test values.
This fix turns off these tests when `MBEDTLS_MPI_MAX_SIZE` is too small to
safely test (notably this is the case in config-thread.h).
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The previous revision of guards around SHA_224 and SHA_384 were not
correct. This set of changes ensures the proper code is available
when SHA_224 and SHA_384 are enabled for use.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Make sure that CMP0012 is set to NEW, without which FindPython3 and
FindPython2 functionality becomes broken with CMake 3.18.2 if searching
by location. CMP0012 being set to OLD is also deprecated as of 3.18.3.
Ensure CMP0011 is set to NEW to avoid warnings and deprecated behaviour
being issued about policy push / pop with CMake 3.18.0 or newer.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
In two test cases, the exponentiation computation was not being fully tested
as when A_bytes (the base) == N_bytes (the modulus) -> A = N. When this is the
case A is reduced to 0 and therefore the result of the computation will always
be 0.
This fixes that issue and therefore increases the test coverage to ensure
different computations are actually being run.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reword test cases to be easier to read and understand.
Adds comments to better explain what the test is doing.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
This temporarily breaks all.sh '*deprecated*' (deprecated functions still used
in the library), which will be fix in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We want to test both sets of functions (ext and non-ext) in turn, so goto exit
is not really and option.
Also, separate setting up the context (which is going to be the same for both
ext and non-ext functions) from setting up the buffers (which will vary).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add two further boundary tests for cases where both the exponent and modulus to
`mbedtls_mpi_exp_mod()` are `MBEDTLS_MPI_MAX_SIZE`, or longer, bytes long.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Work in progress: next step is to test it!
Extract the part that is common with non-ext version to a new internal
function. (We can't just use the non-ext version for that, as it's going to be
deprecated.)
Currently the NIST_KW part is somewhat duplicated between the ext
and non-ext versions, but that's OK because it will soon be removed from the
non-ext version.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Work in progress: next steps are to implement and test it.
Compared to the existing non-ext version:
- to separate tag parameter
- explicit output_len parameter
Also, this version will retain support for NIST_KW (hence documents it), while
the non-ext version will lose it in a few commits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- Document constraints on buffers/pointers NULLability explicitly.
- Simplify terminology around IV/nonce: all AEADs implemented so far call that
a nonce. Keep the parameter names (iv, iv_len) to avoid having to change the
code (or having different names in the header and C files).
- Align documentation to the code regarding parameter constraints: the
documentation said the for ciphers with fixed nonce/tag length, the
iv_len/tag_len arguments were ignored, while the code enforced them to be the
expected value. This is more consistent with what's done with GCM/CCM, which
for tag_len for example accept more than one value, but from a relatively
small set, and will return errors for values outside that set. Accepting a
single value is a particular case of that (the set of acceptable value only
has one element).
Don't document behaviour with NIST KW as we're about to change that.
Note: this function is currently only defined if at least one of GCM, CCM or
ChachaPoly is enabled, even though it's supposed to handle NIST KW as well. No
need to fix this as the function will soon no longer support NIST KW.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* development: (488 commits)
Fix removal of deprecated PSA constants
Use GitHub-compatible table formatting
Remove psa header files in uninstall part
Change function casting in `ssl_calc_finished_tls_sha384`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Add changelog entry file to `ChangeLog.d`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Fix GCC warning about `test_snprintf`
Fix mismatched function parameters (prototype/definition)
Fix build failure on gcc-11
Copyediting
Clarifications around key import
Fix copypasta
A variable is unused in some configurations
Rename test_driver_keygen to test_driver_key_management
Move "internal use" sentence attached to the wrong function
Added changelog
Plug in the entry point for public key export through driver
tests: psa: Reset key attributes where needed
Improve/fix documentation
...
Adds test cases to ensure that `mbedtls_mpi_exp_mod` will return an error with
an exponent or modulus that is greater than `MBEDTLS_MPI_MAX_SIZE` in size.
Adds test cases to ensure that Diffie-Hellman will fail to make a key pair
(using `mbedtls_dhm_make_public`) when the prime modulus is greater than
`MBEDTLS_MPI_MAX_SIZE` in size.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a test case to ensure `mbedtls_mpi_exp_mod` fails when using a key size
larger than MBEDTLS_MPI_MAX_SIZE.
Add a test case to ensure that Diffie-Hellman operations fail when using a key
size larger than MBEDTLS_MPI_MAX_SIZE.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Check that the exponent and modulus is below `MBEDTLS_MPI_MAX_BITS` before
performing a time expensive operation (modular exponentiation). This prevents
a potential DoS from Diffie-Hellman computations with extremely
large key sizes.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Removed unecessary checks on the ALG_SHA_224 and ALG_SHA_384 since
those are handled in config_psa.h by ensuring the correct _C is
included. Reformatted config_psa.h to be alphabetical and made the
assignments line up correctly for consistency. Fixed the guards
for ALG_SHA_224 and ALG_SHA_384 to be correct in the crypto library
source.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The driver interfaces described in crypto_accel_driver.h and
crypto_entropy_driver.h are no longer being worked on. We do not
intend to finish the design of these interfaces or to implement them
in Mbed TLS. They have been superseded by the unified driver
interface (docs/proposed/psa-driver-interface.md), which is being
actively worked on both to finalize the specification and to implement
it in Mbed TLS.
The partially implemented dynamic secure element interface is staying
for now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Due to a misplaced #endif, the (non-functional) macro definitions were
not properly removed from crypto_compat.h if MBEDTLS_DEPRECATED_REMOVED
was declared.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
New tests have been added for all the hash algorithms to
confirm they compile correctly when using PSA_WANT and
accelerator guards.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
This set of changes converts all the previous MBEDTLS_*_C guards in
the crypto library to use the new MBEDTLS_PSA_BUILTIN_ guards for
hash algorithms.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
With the addition of hash algorithms to crypto config there
are new dependencies for SHA224 and SHA384 that need to be confirmed
for those hashes to be used.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
When MBEDTLS_PSA_CRYPTO_CONFIG is disabled, if an Mbed TLS crypto
feature is enabled, declare the corresponding PSA feature as enabled,
in addition to enabling its software implementation. This is necessary
for code that uses PSA APIs and relies on PSA_WANT_xxx symbols to know
which features are enabled (application code, our library code using
MBEDTLS_USE_PSA_CRYPTO, our test dependencies, etc.).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
