mbedtls/include/polarssl/net.h
Manuel Pégourié-Gonnard 57fa314412 Fix depend documentation
2014-10-21 16:32:27 +02:00

209 lines
7.8 KiB
C

/**
* \file net.h
*
* \brief Network communication functions
*
* Copyright (C) 2006-2011, Brainspark B.V.
*
* This file is part of PolarSSL (http://www.polarssl.org)
* Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef POLARSSL_NET_H
#define POLARSSL_NET_H
#if !defined(POLARSSL_CONFIG_FILE)
#include "config.h"
#else
#include POLARSSL_CONFIG_FILE
#endif
#include <string.h>
#define POLARSSL_ERR_NET_SOCKET_FAILED -0x0042 /**< Failed to open a socket. */
#define POLARSSL_ERR_NET_CONNECT_FAILED -0x0044 /**< The connection to the given server / port failed. */
#define POLARSSL_ERR_NET_BIND_FAILED -0x0046 /**< Binding of the socket failed. */
#define POLARSSL_ERR_NET_LISTEN_FAILED -0x0048 /**< Could not listen on the socket. */
#define POLARSSL_ERR_NET_ACCEPT_FAILED -0x004A /**< Could not accept the incoming connection. */
#define POLARSSL_ERR_NET_RECV_FAILED -0x004C /**< Reading information from the socket failed. */
#define POLARSSL_ERR_NET_SEND_FAILED -0x004E /**< Sending information through the socket failed. */
#define POLARSSL_ERR_NET_CONN_RESET -0x0050 /**< Connection was reset by peer. */
#define POLARSSL_ERR_NET_WANT_READ -0x0052 /**< Connection requires a read call. */
#define POLARSSL_ERR_NET_WANT_WRITE -0x0054 /**< Connection requires a write call. */
#define POLARSSL_ERR_NET_UNKNOWN_HOST -0x0056 /**< Failed to get an IP address for the given hostname. */
#define POLARSSL_ERR_NET_TIMEOUT -0x0011 /**< The operation timed out. */
#define POLARSSL_NET_LISTEN_BACKLOG 10 /**< The backlog that listen() should use. */
#define NET_PROTO_TCP 0 /**< The TCP transport protocol */
#define NET_PROTO_UDP 1 /**< The UDP transport protocol */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Initiate a connection with host:port in the given protocol
*
* \param fd Socket to use
* \param host Host to connect to
* \param port Port to connect to
* \param proto Protocol: NET_PROTO_TCP or NET_PROTO_UDP
*
* \return 0 if successful, or one of:
* POLARSSL_ERR_NET_SOCKET_FAILED,
* POLARSSL_ERR_NET_UNKNOWN_HOST,
* POLARSSL_ERR_NET_CONNECT_FAILED
*
* \note Sets the socket in connected mode even with UDP.
*/
int net_connect( int *fd, const char *host, int port, int proto );
/**
* \brief Create a receiving socket on bind_ip:port in the chosen
* protocol. If bind_ip == NULL, all interfaces are bound.
*
* \param fd Socket to use
* \param bind_ip IP to bind to, can be NULL
* \param port Port number to use
* \param proto Protocol: NET_PROTO_TCP or NET_PROTO_UDP
*
* \return 0 if successful, or one of:
* POLARSSL_ERR_NET_SOCKET_FAILED,
* POLARSSL_ERR_NET_BIND_FAILED,
* POLARSSL_ERR_NET_LISTEN_FAILED
*
* \note Regardless of the protocol, opens the sockets and binds it.
* In addition, make the socket listening if protocol is TCP.
*/
int net_bind( int *fd, const char *bind_ip, int port, int proto );
/**
* \brief Accept a connection from a remote client
*
* \param bind_fd Relevant socket
* \param client_fd Will contain the connected client socket
* \param client_ip Will contain the client IP address
* Must be at least 4 bytes, or 16 if IPv6 is supported
*
* \return 0 if successful, POLARSSL_ERR_NET_ACCEPT_FAILED, or
* POLARSSL_ERR_NET_WANT_READ is bind_fd was set to
* non-blocking and accept() is blocking.
*
* \note With UDP, connects the bind_fd to the client and just copy
* its descriptor to client_fd. New clients will not be able
* to connect until you close the socket and bind a new one.
*/
int net_accept( int bind_fd, int *client_fd, void *client_ip );
/**
* \brief Set the socket blocking
*
* \param fd Socket to set
*
* \return 0 if successful, or a non-zero error code
*/
int net_set_block( int fd );
/**
* \brief Set the socket non-blocking
*
* \param fd Socket to set
*
* \return 0 if successful, or a non-zero error code
*/
int net_set_nonblock( int fd );
#if defined(POLARSSL_HAVE_TIME)
/**
* \brief Portable usleep helper
*
* \param usec Amount of microseconds to sleep
*
* \note Real amount of time slept will not be less than
* select()'s timeout granularity (typically, 10ms).
*/
void net_usleep( unsigned long usec );
#endif
/**
* \brief Read at most 'len' characters. If no error occurs,
* the actual amount read is returned.
*
* \param ctx Socket
* \param buf The buffer to write to
* \param len Maximum length of the buffer
*
* \return This function returns the number of bytes received,
* or a non-zero error code; POLARSSL_ERR_NET_WANT_READ
* indicates read() is blocking.
*/
int net_recv( void *ctx, unsigned char *buf, size_t len );
/**
* \brief Write at most 'len' characters. If no error occurs,
* the actual amount read is returned.
*
* \param ctx Socket
* \param buf The buffer to read from
* \param len The length of the buffer
*
* \return This function returns the number of bytes sent,
* or a non-zero error code; POLARSSL_ERR_NET_WANT_WRITE
* indicates write() is blocking.
*/
int net_send( void *ctx, const unsigned char *buf, size_t len );
#if defined(POLARSSL_HAVE_TIME)
/**
* \brief Read at most 'len' characters, blocking for at most
* 'timeout' seconds. If no error occurs, the actual amount
* read is returned.
*
* \param ctx Socket
* \param buf The buffer to write to
* \param len Maximum length of the buffer
* \param timeout Maximum number of seconds to wait for data
*
* \return This function returns the number of bytes received,
* or a non-zero error code:
* POLARSSL_ERR_NET_TIMEOUT if the operation timed out,
* POLARSSL_ERR_NET_WANT_READ if interrupted by a signal.
*
* \note This function will block (until data becomes available or
* timeout is reached) even if the socket is set to
* non-blocking. Handling timeouts with non-blocking reads
* requires a different strategy.
*/
int net_recv_timeout( void *ctx, unsigned char *buf, size_t len,
unsigned char timeout );
#endif /* POLARSSL_HAVE_TIME */
/**
* \brief Gracefully shutdown the connection
*
* \param fd The socket to close
*/
void net_close( int fd );
#ifdef __cplusplus
}
#endif
#endif /* net.h */