mbedtls/library/ecp.c
2013-11-26 15:19:56 +01:00

2207 lines
63 KiB
C

/*
* Elliptic curves over GF(p)
*
* Copyright (C) 2006-2013, Brainspark B.V.
*
* This file is part of PolarSSL (http://www.polarssl.org)
* Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
/*
* References:
*
* SEC1 http://www.secg.org/index.php?action=secg,docs_secg
* GECC = Guide to Elliptic Curve Cryptography - Hankerson, Menezes, Vanstone
* FIPS 186-3 http://csrc.nist.gov/publications/fips/fips186-3/fips_186-3.pdf
* RFC 4492 for the related TLS structures and constants
*
* [2] CORON, Jean-Sébastien. Resistance against differential power analysis
* for elliptic curve cryptosystems. In : Cryptographic Hardware and
* Embedded Systems. Springer Berlin Heidelberg, 1999. p. 292-302.
* <http://link.springer.com/chapter/10.1007/3-540-48059-5_25>
*
* [3] HEDABOU, Mustapha, PINEL, Pierre, et BÉNÉTEAU, Lucien. A comb method to
* render ECC resistant against Side Channel Attacks. IACR Cryptology
* ePrint Archive, 2004, vol. 2004, p. 342.
* <http://eprint.iacr.org/2004/342.pdf>
*/
#include "polarssl/config.h"
#if defined(POLARSSL_ECP_C)
#include "polarssl/ecp.h"
#if defined(POLARSSL_MEMORY_C)
#include "polarssl/memory.h"
#else
#define polarssl_malloc malloc
#define polarssl_free free
#endif
#include <limits.h>
#include <stdlib.h>
#if defined(_MSC_VER) && !defined(inline)
#define inline _inline
#else
#if defined(__ARMCC_VERSION) && !defined(inline)
#define inline __inline
#endif /* __ARMCC_VERSION */
#endif /*_MSC_VER */
#if defined(POLARSSL_SELF_TEST)
/*
* Counts of point addition and doubling, and field multiplications.
* Used to test resistance of point multiplication to simple timing attacks.
*/
unsigned long add_count, dbl_count, mul_count;
#endif
/*
* List of supported curves:
* - internal ID
* - TLS NamedCurve ID (RFC 4492 sec. 5.1.1, RFC 7071 sec. 2)
* - size in bits
* - readable name
*/
const ecp_curve_info ecp_supported_curves[] =
{
#if defined(POLARSSL_ECP_DP_BP512R1_ENABLED)
{ POLARSSL_ECP_DP_BP512R1, 28, 512, "brainpool512r1" },
#endif
#if defined(POLARSSL_ECP_DP_BP384R1_ENABLED)
{ POLARSSL_ECP_DP_BP384R1, 27, 384, "brainpool384r1" },
#endif
#if defined(POLARSSL_ECP_DP_BP256R1_ENABLED)
{ POLARSSL_ECP_DP_BP256R1, 26, 256, "brainpool256r1" },
#endif
#if defined(POLARSSL_ECP_DP_SECP521R1_ENABLED)
{ POLARSSL_ECP_DP_SECP521R1, 25, 521, "secp521r1" },
#endif
#if defined(POLARSSL_ECP_DP_SECP384R1_ENABLED)
{ POLARSSL_ECP_DP_SECP384R1, 24, 384, "secp384r1" },
#endif
#if defined(POLARSSL_ECP_DP_SECP256R1_ENABLED)
{ POLARSSL_ECP_DP_SECP256R1, 23, 256, "secp256r1" },
#endif
#if defined(POLARSSL_ECP_DP_SECP224R1_ENABLED)
{ POLARSSL_ECP_DP_SECP224R1, 21, 224, "secp224r1" },
#endif
#if defined(POLARSSL_ECP_DP_SECP192R1_ENABLED)
{ POLARSSL_ECP_DP_SECP192R1, 19, 192, "secp192r1" },
#endif
{ POLARSSL_ECP_DP_NONE, 0, 0, NULL },
};
/*
* List of supported curves and associated info
*/
const ecp_curve_info *ecp_curve_list( void )
{
return ecp_supported_curves;
}
/*
* Get the curve info for the internal identifer
*/
const ecp_curve_info *ecp_curve_info_from_grp_id( ecp_group_id grp_id )
{
const ecp_curve_info *curve_info;
for( curve_info = ecp_curve_list();
curve_info->grp_id != POLARSSL_ECP_DP_NONE;
curve_info++ )
{
if( curve_info->grp_id == grp_id )
return( curve_info );
}
return( NULL );
}
/*
* Get the curve info from the TLS identifier
*/
const ecp_curve_info *ecp_curve_info_from_tls_id( uint16_t tls_id )
{
const ecp_curve_info *curve_info;
for( curve_info = ecp_curve_list();
curve_info->grp_id != POLARSSL_ECP_DP_NONE;
curve_info++ )
{
if( curve_info->tls_id == tls_id )
return( curve_info );
}
return( NULL );
}
/*
* Initialize (the components of) a point
*/
void ecp_point_init( ecp_point *pt )
{
if( pt == NULL )
return;
mpi_init( &pt->X );
mpi_init( &pt->Y );
mpi_init( &pt->Z );
}
/*
* Initialize (the components of) a group
*/
void ecp_group_init( ecp_group *grp )
{
if( grp == NULL )
return;
memset( grp, 0, sizeof( ecp_group ) );
}
/*
* Initialize (the components of) a key pair
*/
void ecp_keypair_init( ecp_keypair *key )
{
if ( key == NULL )
return;
ecp_group_init( &key->grp );
mpi_init( &key->d );
ecp_point_init( &key->Q );
}
/*
* Unallocate (the components of) a point
*/
void ecp_point_free( ecp_point *pt )
{
if( pt == NULL )
return;
mpi_free( &( pt->X ) );
mpi_free( &( pt->Y ) );
mpi_free( &( pt->Z ) );
}
/*
* Unallocate (the components of) a group
*/
void ecp_group_free( ecp_group *grp )
{
size_t i;
if( grp == NULL )
return;
mpi_free( &grp->P );
mpi_free( &grp->A );
mpi_free( &grp->B );
ecp_point_free( &grp->G );
mpi_free( &grp->N );
if( grp->T != NULL )
{
for( i = 0; i < grp->T_size; i++ )
ecp_point_free( &grp->T[i] );
polarssl_free( grp->T );
}
memset( grp, 0, sizeof( ecp_group ) );
}
/*
* Unallocate (the components of) a key pair
*/
void ecp_keypair_free( ecp_keypair *key )
{
if ( key == NULL )
return;
ecp_group_free( &key->grp );
mpi_free( &key->d );
ecp_point_free( &key->Q );
}
/*
* Copy the contents of a point
*/
int ecp_copy( ecp_point *P, const ecp_point *Q )
{
int ret;
MPI_CHK( mpi_copy( &P->X, &Q->X ) );
MPI_CHK( mpi_copy( &P->Y, &Q->Y ) );
MPI_CHK( mpi_copy( &P->Z, &Q->Z ) );
cleanup:
return( ret );
}
/*
* Copy the contents of a group object
*/
int ecp_group_copy( ecp_group *dst, const ecp_group *src )
{
return ecp_use_known_dp( dst, src->id );
}
/*
* Set point to zero
*/
int ecp_set_zero( ecp_point *pt )
{
int ret;
MPI_CHK( mpi_lset( &pt->X , 1 ) );
MPI_CHK( mpi_lset( &pt->Y , 1 ) );
MPI_CHK( mpi_lset( &pt->Z , 0 ) );
cleanup:
return( ret );
}
/*
* Tell if a point is zero
*/
int ecp_is_zero( ecp_point *pt )
{
return( mpi_cmp_int( &pt->Z, 0 ) == 0 );
}
/*
* Import a non-zero point from ASCII strings
*/
int ecp_point_read_string( ecp_point *P, int radix,
const char *x, const char *y )
{
int ret;
MPI_CHK( mpi_read_string( &P->X, radix, x ) );
MPI_CHK( mpi_read_string( &P->Y, radix, y ) );
MPI_CHK( mpi_lset( &P->Z, 1 ) );
cleanup:
return( ret );
}
/*
* Export a point into unsigned binary data (SEC1 2.3.3)
*/
int ecp_point_write_binary( const ecp_group *grp, const ecp_point *P,
int format, size_t *olen,
unsigned char *buf, size_t buflen )
{
int ret = 0;
size_t plen;
if( format != POLARSSL_ECP_PF_UNCOMPRESSED &&
format != POLARSSL_ECP_PF_COMPRESSED )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
/*
* Common case: P == 0
*/
if( mpi_cmp_int( &P->Z, 0 ) == 0 )
{
if( buflen < 1 )
return( POLARSSL_ERR_ECP_BUFFER_TOO_SMALL );
buf[0] = 0x00;
*olen = 1;
return( 0 );
}
plen = mpi_size( &grp->P );
if( format == POLARSSL_ECP_PF_UNCOMPRESSED )
{
*olen = 2 * plen + 1;
if( buflen < *olen )
return( POLARSSL_ERR_ECP_BUFFER_TOO_SMALL );
buf[0] = 0x04;
MPI_CHK( mpi_write_binary( &P->X, buf + 1, plen ) );
MPI_CHK( mpi_write_binary( &P->Y, buf + 1 + plen, plen ) );
}
else if( format == POLARSSL_ECP_PF_COMPRESSED )
{
*olen = plen + 1;
if( buflen < *olen )
return( POLARSSL_ERR_ECP_BUFFER_TOO_SMALL );
buf[0] = 0x02 + mpi_get_bit( &P->Y, 0 );
MPI_CHK( mpi_write_binary( &P->X, buf + 1, plen ) );
}
cleanup:
return( ret );
}
/*
* Import a point from unsigned binary data (SEC1 2.3.4)
*/
int ecp_point_read_binary( const ecp_group *grp, ecp_point *pt,
const unsigned char *buf, size_t ilen ) {
int ret;
size_t plen;
if( ilen == 1 && buf[0] == 0x00 )
return( ecp_set_zero( pt ) );
plen = mpi_size( &grp->P );
if( ilen != 2 * plen + 1 || buf[0] != 0x04 )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
MPI_CHK( mpi_read_binary( &pt->X, buf + 1, plen ) );
MPI_CHK( mpi_read_binary( &pt->Y, buf + 1 + plen, plen ) );
MPI_CHK( mpi_lset( &pt->Z, 1 ) );
cleanup:
return( ret );
}
/*
* Import a point from a TLS ECPoint record (RFC 4492)
* struct {
* opaque point <1..2^8-1>;
* } ECPoint;
*/
int ecp_tls_read_point( const ecp_group *grp, ecp_point *pt,
const unsigned char **buf, size_t buf_len )
{
unsigned char data_len;
const unsigned char *buf_start;
/*
* We must have at least two bytes (1 for length, at least of for data)
*/
if( buf_len < 2 )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
data_len = *(*buf)++;
if( data_len < 1 || data_len > buf_len - 1 )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
/*
* Save buffer start for read_binary and update buf
*/
buf_start = *buf;
*buf += data_len;
return ecp_point_read_binary( grp, pt, buf_start, data_len );
}
/*
* Export a point as a TLS ECPoint record (RFC 4492)
* struct {
* opaque point <1..2^8-1>;
* } ECPoint;
*/
int ecp_tls_write_point( const ecp_group *grp, const ecp_point *pt,
int format, size_t *olen,
unsigned char *buf, size_t blen )
{
int ret;
/*
* buffer length must be at least one, for our length byte
*/
if( blen < 1 )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
if( ( ret = ecp_point_write_binary( grp, pt, format,
olen, buf + 1, blen - 1) ) != 0 )
return( ret );
/*
* write length to the first byte and update total length
*/
buf[0] = (unsigned char) *olen;
++*olen;
return 0;
}
/*
* Import an ECP group from ASCII strings, general case (A used)
*/
static int ecp_group_read_string_gen( ecp_group *grp, int radix,
const char *p, const char *a, const char *b,
const char *gx, const char *gy, const char *n)
{
int ret;
MPI_CHK( mpi_read_string( &grp->P, radix, p ) );
MPI_CHK( mpi_read_string( &grp->A, radix, a ) );
MPI_CHK( mpi_read_string( &grp->B, radix, b ) );
MPI_CHK( ecp_point_read_string( &grp->G, radix, gx, gy ) );
MPI_CHK( mpi_read_string( &grp->N, radix, n ) );
grp->pbits = mpi_msb( &grp->P );
grp->nbits = mpi_msb( &grp->N );
cleanup:
if( ret != 0 )
ecp_group_free( grp );
return( ret );
}
/*
* Import an ECP group from ASCII strings, case A == -3
*/
int ecp_group_read_string( ecp_group *grp, int radix,
const char *p, const char *b,
const char *gx, const char *gy, const char *n)
{
int ret;
MPI_CHK( ecp_group_read_string_gen( grp, radix, p, "00", b, gx, gy, n ) );
MPI_CHK( mpi_add_int( &grp->A, &grp->P, -3 ) );
cleanup:
if( ret != 0 )
ecp_group_free( grp );
return( ret );
}
/*
* Domain parameters for secp192r1
*/
#define SECP192R1_P \
"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFF"
#define SECP192R1_B \
"64210519E59C80E70FA7E9AB72243049FEB8DEECC146B9B1"
#define SECP192R1_GX \
"188DA80EB03090F67CBF20EB43A18800F4FF0AFD82FF1012"
#define SECP192R1_GY \
"07192B95FFC8DA78631011ED6B24CDD573F977A11E794811"
#define SECP192R1_N \
"FFFFFFFFFFFFFFFFFFFFFFFF99DEF836146BC9B1B4D22831"
/*
* Domain parameters for secp224r1
*/
#define SECP224R1_P \
"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000001"
#define SECP224R1_B \
"B4050A850C04B3ABF54132565044B0B7D7BFD8BA270B39432355FFB4"
#define SECP224R1_GX \
"B70E0CBD6BB4BF7F321390B94A03C1D356C21122343280D6115C1D21"
#define SECP224R1_GY \
"BD376388B5F723FB4C22DFE6CD4375A05A07476444D5819985007E34"
#define SECP224R1_N \
"FFFFFFFFFFFFFFFFFFFFFFFFFFFF16A2E0B8F03E13DD29455C5C2A3D"
/*
* Domain parameters for secp256r1
*/
#define SECP256R1_P \
"FFFFFFFF00000001000000000000000000000000FFFFFFFFFFFFFFFFFFFFFFFF"
#define SECP256R1_B \
"5AC635D8AA3A93E7B3EBBD55769886BC651D06B0CC53B0F63BCE3C3E27D2604B"
#define SECP256R1_GX \
"6B17D1F2E12C4247F8BCE6E563A440F277037D812DEB33A0F4A13945D898C296"
#define SECP256R1_GY \
"4FE342E2FE1A7F9B8EE7EB4A7C0F9E162BCE33576B315ECECBB6406837BF51F5"
#define SECP256R1_N \
"FFFFFFFF00000000FFFFFFFFFFFFFFFFBCE6FAADA7179E84F3B9CAC2FC632551"
/*
* Domain parameters for secp384r1
*/
#define SECP384R1_P \
"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF" \
"FFFFFFFFFFFFFFFEFFFFFFFF0000000000000000FFFFFFFF"
#define SECP384R1_B \
"B3312FA7E23EE7E4988E056BE3F82D19181D9C6EFE814112" \
"0314088F5013875AC656398D8A2ED19D2A85C8EDD3EC2AEF"
#define SECP384R1_GX \
"AA87CA22BE8B05378EB1C71EF320AD746E1D3B628BA79B98" \
"59F741E082542A385502F25DBF55296C3A545E3872760AB7"
#define SECP384R1_GY \
"3617DE4A96262C6F5D9E98BF9292DC29F8F41DBD289A147C" \
"E9DA3113B5F0B8C00A60B1CE1D7E819D7A431D7C90EA0E5F"
#define SECP384R1_N \
"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF" \
"C7634D81F4372DDF581A0DB248B0A77AECEC196ACCC52973"
/*
* Domain parameters for secp521r1
*/
#define SECP521R1_P \
"000001FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF" \
"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF" \
"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
#define SECP521R1_B \
"00000051953EB9618E1C9A1F929A21A0B68540EEA2DA725B" \
"99B315F3B8B489918EF109E156193951EC7E937B1652C0BD" \
"3BB1BF073573DF883D2C34F1EF451FD46B503F00"
#define SECP521R1_GX \
"000000C6858E06B70404E9CD9E3ECB662395B4429C648139" \
"053FB521F828AF606B4D3DBAA14B5E77EFE75928FE1DC127" \
"A2FFA8DE3348B3C1856A429BF97E7E31C2E5BD66"
#define SECP521R1_GY \
"0000011839296A789A3BC0045C8A5FB42C7D1BD998F54449" \
"579B446817AFBD17273E662C97EE72995EF42640C550B901" \
"3FAD0761353C7086A272C24088BE94769FD16650"
#define SECP521R1_N \
"000001FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF" \
"FFFFFFFFFFFFFFFFFFFFFFFA51868783BF2F966B7FCC0148" \
"F709A5D03BB5C9B8899C47AEBB6FB71E91386409"
/*
* Domain parameters for brainpoolP256r1 (RFC 5639 3.4)
*/
#define BP256R1_P \
"A9FB57DBA1EEA9BC3E660A909D838D726E3BF623D52620282013481D1F6E5377"
#define BP256R1_A \
"7D5A0975FC2C3057EEF67530417AFFE7FB8055C126DC5C6CE94A4B44F330B5D9"
#define BP256R1_B \
"26DC5C6CE94A4B44F330B5D9BBD77CBF958416295CF7E1CE6BCCDC18FF8C07B6"
#define BP256R1_GX \
"8BD2AEB9CB7E57CB2C4B482FFC81B7AFB9DE27E1E3BD23C23A4453BD9ACE3262"
#define BP256R1_GY \
"547EF835C3DAC4FD97F8461A14611DC9C27745132DED8E545C1D54C72F046997"
#define BP256R1_N \
"A9FB57DBA1EEA9BC3E660A909D838D718C397AA3B561A6F7901E0E82974856A7"
/*
* Domain parameters for brainpoolP384r1 (RFC 5639 3.6)
*/
#define BP384R1_P \
"8CB91E82A3386D280F5D6F7E50E641DF152F7109ED5456B412B1DA197FB711" \
"23ACD3A729901D1A71874700133107EC53"
#define BP384R1_A \
"7BC382C63D8C150C3C72080ACE05AFA0C2BEA28E4FB22787139165EFBA91F9" \
"0F8AA5814A503AD4EB04A8C7DD22CE2826"
#define BP384R1_B \
"04A8C7DD22CE28268B39B55416F0447C2FB77DE107DCD2A62E880EA53EEB62" \
"D57CB4390295DBC9943AB78696FA504C11"
#define BP384R1_GX \
"1D1C64F068CF45FFA2A63A81B7C13F6B8847A3E77EF14FE3DB7FCAFE0CBD10" \
"E8E826E03436D646AAEF87B2E247D4AF1E"
#define BP384R1_GY \
"8ABE1D7520F9C2A45CB1EB8E95CFD55262B70B29FEEC5864E19C054FF99129" \
"280E4646217791811142820341263C5315"
#define BP384R1_N \
"8CB91E82A3386D280F5D6F7E50E641DF152F7109ED5456B31F166E6CAC0425" \
"A7CF3AB6AF6B7FC3103B883202E9046565"
/*
* Domain parameters for brainpoolP512r1 (RFC 5639 3.7)
*/
#define BP512R1_P \
"AADD9DB8DBE9C48B3FD4E6AE33C9FC07CB308DB3B3C9D20ED6639CCA703308" \
"717D4D9B009BC66842AECDA12AE6A380E62881FF2F2D82C68528AA6056583A48F3"
#define BP512R1_A \
"7830A3318B603B89E2327145AC234CC594CBDD8D3DF91610A83441CAEA9863" \
"BC2DED5D5AA8253AA10A2EF1C98B9AC8B57F1117A72BF2C7B9E7C1AC4D77FC94CA"
#define BP512R1_B \
"3DF91610A83441CAEA9863BC2DED5D5AA8253AA10A2EF1C98B9AC8B57F1117" \
"A72BF2C7B9E7C1AC4D77FC94CADC083E67984050B75EBAE5DD2809BD638016F723"
#define BP512R1_GX \
"81AEE4BDD82ED9645A21322E9C4C6A9385ED9F70B5D916C1B43B62EEF4D009" \
"8EFF3B1F78E2D0D48D50D1687B93B97D5F7C6D5047406A5E688B352209BCB9F822"
#define BP512R1_GY \
"7DDE385D566332ECC0EABFA9CF7822FDF209F70024A57B1AA000C55B881F81" \
"11B2DCDE494A5F485E5BCA4BD88A2763AED1CA2B2FA8F0540678CD1E0F3AD80892"
#define BP512R1_N \
"AADD9DB8DBE9C48B3FD4E6AE33C9FC07CB308DB3B3C9D20ED6639CCA703308" \
"70553E5C414CA92619418661197FAC10471DB1D381085DDADDB58796829CA90069"
#if defined(POLARSSL_ECP_NIST_OPTIM)
/* Forward declarations */
static int ecp_mod_p192( mpi * );
static int ecp_mod_p224( mpi * );
static int ecp_mod_p256( mpi * );
static int ecp_mod_p384( mpi * );
static int ecp_mod_p521( mpi * );
#endif
/*
* Set a group using well-known domain parameters
*/
int ecp_use_known_dp( ecp_group *grp, ecp_group_id id )
{
grp->id = id;
switch( id )
{
#if defined(POLARSSL_ECP_DP_SECP192R1_ENABLED)
case POLARSSL_ECP_DP_SECP192R1:
#if defined(POLARSSL_ECP_NIST_OPTIM)
grp->modp = ecp_mod_p192;
#endif
return( ecp_group_read_string( grp, 16,
SECP192R1_P, SECP192R1_B,
SECP192R1_GX, SECP192R1_GY, SECP192R1_N ) );
#endif /* POLARSSL_ECP_DP_SECP192R1_ENABLED */
#if defined(POLARSSL_ECP_DP_SECP224R1_ENABLED)
case POLARSSL_ECP_DP_SECP224R1:
#if defined(POLARSSL_ECP_NIST_OPTIM)
grp->modp = ecp_mod_p224;
#endif
return( ecp_group_read_string( grp, 16,
SECP224R1_P, SECP224R1_B,
SECP224R1_GX, SECP224R1_GY, SECP224R1_N ) );
#endif /* POLARSSL_ECP_DP_SECP224R1_ENABLED */
#if defined(POLARSSL_ECP_DP_SECP256R1_ENABLED)
case POLARSSL_ECP_DP_SECP256R1:
#if defined(POLARSSL_ECP_NIST_OPTIM)
grp->modp = ecp_mod_p256;
#endif
return( ecp_group_read_string( grp, 16,
SECP256R1_P, SECP256R1_B,
SECP256R1_GX, SECP256R1_GY, SECP256R1_N ) );
#endif /* POLARSSL_ECP_DP_SECP256R1_ENABLED */
#if defined(POLARSSL_ECP_DP_SECP384R1_ENABLED)
case POLARSSL_ECP_DP_SECP384R1:
#if defined(POLARSSL_ECP_NIST_OPTIM)
grp->modp = ecp_mod_p384;
#endif
return( ecp_group_read_string( grp, 16,
SECP384R1_P, SECP384R1_B,
SECP384R1_GX, SECP384R1_GY, SECP384R1_N ) );
#endif /* POLARSSL_ECP_DP_SECP384R1_ENABLED */
#if defined(POLARSSL_ECP_DP_SECP521R1_ENABLED)
case POLARSSL_ECP_DP_SECP521R1:
#if defined(POLARSSL_ECP_NIST_OPTIM)
grp->modp = ecp_mod_p521;
#endif
return( ecp_group_read_string( grp, 16,
SECP521R1_P, SECP521R1_B,
SECP521R1_GX, SECP521R1_GY, SECP521R1_N ) );
#endif /* POLARSSL_ECP_DP_SECP521R1_ENABLED */
#if defined(POLARSSL_ECP_DP_BP256R1_ENABLED)
case POLARSSL_ECP_DP_BP256R1:
return( ecp_group_read_string_gen( grp, 16,
BP256R1_P, BP256R1_A, BP256R1_B,
BP256R1_GX, BP256R1_GY, BP256R1_N ) );
#endif /* POLARSSL_ECP_DP_BP256R1_ENABLED */
#if defined(POLARSSL_ECP_DP_BP384R1_ENABLED)
case POLARSSL_ECP_DP_BP384R1:
return( ecp_group_read_string_gen( grp, 16,
BP384R1_P, BP384R1_A, BP384R1_B,
BP384R1_GX, BP384R1_GY, BP384R1_N ) );
#endif /* POLARSSL_ECP_DP_BP384R1_ENABLED */
#if defined(POLARSSL_ECP_DP_BP512R1_ENABLED)
case POLARSSL_ECP_DP_BP512R1:
return( ecp_group_read_string_gen( grp, 16,
BP512R1_P, BP512R1_A, BP512R1_B,
BP512R1_GX, BP512R1_GY, BP512R1_N ) );
#endif /* POLARSSL_ECP_DP_BP512R1_ENABLED */
default:
ecp_group_free( grp );
return( POLARSSL_ERR_ECP_FEATURE_UNAVAILABLE );
}
}
/*
* Set a group from an ECParameters record (RFC 4492)
*/
int ecp_tls_read_group( ecp_group *grp, const unsigned char **buf, size_t len )
{
uint16_t tls_id;
const ecp_curve_info *curve_info;
/*
* We expect at least three bytes (see below)
*/
if( len < 3 )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
/*
* First byte is curve_type; only named_curve is handled
*/
if( *(*buf)++ != POLARSSL_ECP_TLS_NAMED_CURVE )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
/*
* Next two bytes are the namedcurve value
*/
tls_id = *(*buf)++;
tls_id <<= 8;
tls_id |= *(*buf)++;
if( ( curve_info = ecp_curve_info_from_tls_id( tls_id ) ) == NULL )
return( POLARSSL_ERR_ECP_FEATURE_UNAVAILABLE );
return ecp_use_known_dp( grp, curve_info->grp_id );
}
/*
* Write the ECParameters record corresponding to a group (RFC 4492)
*/
int ecp_tls_write_group( const ecp_group *grp, size_t *olen,
unsigned char *buf, size_t blen )
{
const ecp_curve_info *curve_info;
if( ( curve_info = ecp_curve_info_from_grp_id( grp->id ) ) == NULL )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
/*
* We are going to write 3 bytes (see below)
*/
*olen = 3;
if( blen < *olen )
return( POLARSSL_ERR_ECP_BUFFER_TOO_SMALL );
/*
* First byte is curve_type, always named_curve
*/
*buf++ = POLARSSL_ECP_TLS_NAMED_CURVE;
/*
* Next two bytes are the namedcurve value
*/
buf[0] = curve_info->tls_id >> 8;
buf[1] = curve_info->tls_id & 0xFF;
return 0;
}
/*
* Wrapper around fast quasi-modp functions, with fall-back to mpi_mod_mpi.
* See the documentation of struct ecp_group.
*
* This function is in the critial loop for ecp_mul, so pay attention to perf.
*/
static int ecp_modp( mpi *N, const ecp_group *grp )
{
int ret;
if( grp->modp == NULL )
return( mpi_mod_mpi( N, N, &grp->P ) );
/* N->s < 0 is a much faster test, which fails only if N is 0 */
if( ( N->s < 0 && mpi_cmp_int( N, 0 ) != 0 ) ||
mpi_msb( N ) > 2 * grp->pbits )
{
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
}
MPI_CHK( grp->modp( N ) );
/* N->s < 0 is a much faster test, which fails only if N is 0 */
while( N->s < 0 && mpi_cmp_int( N, 0 ) != 0 )
MPI_CHK( mpi_add_mpi( N, N, &grp->P ) );
while( mpi_cmp_mpi( N, &grp->P ) >= 0 )
/* we known P, N and the result are positive */
MPI_CHK( mpi_sub_abs( N, N, &grp->P ) );
cleanup:
return( ret );
}
/*
* Fast mod-p functions expect their argument to be in the 0..p^2 range.
*
* In order to guarantee that, we need to ensure that operands of
* mpi_mul_mpi are in the 0..p range. So, after each operation we will
* bring the result back to this range.
*
* The following macros are shortcuts for doing that.
*/
/*
* Reduce a mpi mod p in-place, general case, to use after mpi_mul_mpi
*/
#if defined(POLARSSL_SELF_TEST)
#define INC_MUL_COUNT mul_count++;
#else
#define INC_MUL_COUNT
#endif
#define MOD_MUL( N ) do { MPI_CHK( ecp_modp( &N, grp ) ); INC_MUL_COUNT } \
while( 0 )
/*
* Reduce a mpi mod p in-place, to use after mpi_sub_mpi
* N->s < 0 is a very fast test, which fails only if N is 0
*/
#define MOD_SUB( N ) \
while( N.s < 0 && mpi_cmp_int( &N, 0 ) != 0 ) \
MPI_CHK( mpi_add_mpi( &N, &N, &grp->P ) )
/*
* Reduce a mpi mod p in-place, to use after mpi_add_mpi and mpi_mul_int.
* We known P, N and the result are positive, so sub_abs is correct, and
* a bit faster.
*/
#define MOD_ADD( N ) \
while( mpi_cmp_mpi( &N, &grp->P ) >= 0 ) \
MPI_CHK( mpi_sub_abs( &N, &N, &grp->P ) )
/*
* Normalize jacobian coordinates so that Z == 0 || Z == 1 (GECC 3.2.1)
* Cost: 1N := 1I + 3M + 1S
*/
static int ecp_normalize( const ecp_group *grp, ecp_point *pt )
{
int ret;
mpi Zi, ZZi;
if( mpi_cmp_int( &pt->Z, 0 ) == 0 )
return( 0 );
mpi_init( &Zi ); mpi_init( &ZZi );
/*
* X = X / Z^2 mod p
*/
MPI_CHK( mpi_inv_mod( &Zi, &pt->Z, &grp->P ) );
MPI_CHK( mpi_mul_mpi( &ZZi, &Zi, &Zi ) ); MOD_MUL( ZZi );
MPI_CHK( mpi_mul_mpi( &pt->X, &pt->X, &ZZi ) ); MOD_MUL( pt->X );
/*
* Y = Y / Z^3 mod p
*/
MPI_CHK( mpi_mul_mpi( &pt->Y, &pt->Y, &ZZi ) ); MOD_MUL( pt->Y );
MPI_CHK( mpi_mul_mpi( &pt->Y, &pt->Y, &Zi ) ); MOD_MUL( pt->Y );
/*
* Z = 1
*/
MPI_CHK( mpi_lset( &pt->Z, 1 ) );
cleanup:
mpi_free( &Zi ); mpi_free( &ZZi );
return( ret );
}
/*
* Normalize jacobian coordinates of an array of (pointers to) points,
* using Montgomery's trick to perform only one inversion mod P.
* (See for example Cohen's "A Course in Computational Algebraic Number
* Theory", Algorithm 10.3.4.)
*
* Warning: fails (returning an error) if one of the points is zero!
* This should never happen, see choice of w in ecp_mul().
*
* Cost: 1N(t) := 1I + (6t - 3)M + 1S
*/
static int ecp_normalize_many( const ecp_group *grp,
ecp_point *T[], size_t t_len )
{
int ret;
size_t i;
mpi *c, u, Zi, ZZi;
if( t_len < 2 )
return( ecp_normalize( grp, *T ) );
if( ( c = (mpi *) polarssl_malloc( t_len * sizeof( mpi ) ) ) == NULL )
return( POLARSSL_ERR_ECP_MALLOC_FAILED );
mpi_init( &u ); mpi_init( &Zi ); mpi_init( &ZZi );
for( i = 0; i < t_len; i++ )
mpi_init( &c[i] );
/*
* c[i] = Z_0 * ... * Z_i
*/
MPI_CHK( mpi_copy( &c[0], &T[0]->Z ) );
for( i = 1; i < t_len; i++ )
{
MPI_CHK( mpi_mul_mpi( &c[i], &c[i-1], &T[i]->Z ) );
MOD_MUL( c[i] );
}
/*
* u = 1 / (Z_0 * ... * Z_n) mod P
*/
MPI_CHK( mpi_inv_mod( &u, &c[t_len-1], &grp->P ) );
for( i = t_len - 1; ; i-- )
{
/*
* Zi = 1 / Z_i mod p
* u = 1 / (Z_0 * ... * Z_i) mod P
*/
if( i == 0 ) {
MPI_CHK( mpi_copy( &Zi, &u ) );
}
else
{
MPI_CHK( mpi_mul_mpi( &Zi, &u, &c[i-1] ) ); MOD_MUL( Zi );
MPI_CHK( mpi_mul_mpi( &u, &u, &T[i]->Z ) ); MOD_MUL( u );
}
/*
* proceed as in normalize()
*/
MPI_CHK( mpi_mul_mpi( &ZZi, &Zi, &Zi ) ); MOD_MUL( ZZi );
MPI_CHK( mpi_mul_mpi( &T[i]->X, &T[i]->X, &ZZi ) ); MOD_MUL( T[i]->X );
MPI_CHK( mpi_mul_mpi( &T[i]->Y, &T[i]->Y, &ZZi ) ); MOD_MUL( T[i]->Y );
MPI_CHK( mpi_mul_mpi( &T[i]->Y, &T[i]->Y, &Zi ) ); MOD_MUL( T[i]->Y );
MPI_CHK( mpi_lset( &T[i]->Z, 1 ) );
if( i == 0 )
break;
}
cleanup:
mpi_free( &u ); mpi_free( &Zi ); mpi_free( &ZZi );
for( i = 0; i < t_len; i++ )
mpi_free( &c[i] );
polarssl_free( c );
return( ret );
}
/*
* Conditional point inversion: Q -> -Q = (Q.X, -Q.Y, Q.Z) without leak.
* "inv" must be 0 (don't invert) or 1 (invert) or the result will be invalid
*/
static int ecp_safe_invert( const ecp_group *grp,
ecp_point *Q,
unsigned char inv )
{
int ret;
unsigned char nonzero;
mpi mQY;
mpi_init( &mQY );
/* Use the fact that -Q.Y mod P = P - Q.Y unless Q.Y == 0 */
MPI_CHK( mpi_sub_mpi( &mQY, &grp->P, &Q->Y ) );
nonzero = mpi_cmp_int( &Q->Y, 0 ) != 0;
MPI_CHK( mpi_safe_cond_assign( &Q->Y, &mQY, inv & nonzero ) );
cleanup:
mpi_free( &mQY );
return( ret );
}
/*
* Point doubling R = 2 P, Jacobian coordinates
*
* http://www.hyperelliptic.org/EFD/g1p/auto-code/shortw/jacobian/doubling/dbl-2007-bl.op3
* with heavy variable renaming, some reordering and one minor modification
* (a = 2 * b, c = d - 2a replaced with c = d, c = c - b, c = c - b)
* in order to use a lot less intermediate variables (6 vs 25).
*
* Cost: 1D := 2M + 8S
*/
static int ecp_double_jac( const ecp_group *grp, ecp_point *R,
const ecp_point *P )
{
int ret;
mpi T1, T2, T3, X3, Y3, Z3;
#if defined(POLARSSL_SELF_TEST)
dbl_count++;
#endif
mpi_init( &T1 ); mpi_init( &T2 ); mpi_init( &T3 );
mpi_init( &X3 ); mpi_init( &Y3 ); mpi_init( &Z3 );
MPI_CHK( mpi_mul_mpi( &T3, &P->X, &P->X ) ); MOD_MUL( T3 );
MPI_CHK( mpi_mul_mpi( &T2, &P->Y, &P->Y ) ); MOD_MUL( T2 );
MPI_CHK( mpi_mul_mpi( &Y3, &T2, &T2 ) ); MOD_MUL( Y3 );
MPI_CHK( mpi_add_mpi( &X3, &P->X, &T2 ) ); MOD_ADD( X3 );
MPI_CHK( mpi_mul_mpi( &X3, &X3, &X3 ) ); MOD_MUL( X3 );
MPI_CHK( mpi_sub_mpi( &X3, &X3, &Y3 ) ); MOD_SUB( X3 );
MPI_CHK( mpi_sub_mpi( &X3, &X3, &T3 ) ); MOD_SUB( X3 );
MPI_CHK( mpi_mul_int( &T1, &X3, 2 ) ); MOD_ADD( T1 );
MPI_CHK( mpi_mul_mpi( &Z3, &P->Z, &P->Z ) ); MOD_MUL( Z3 );
MPI_CHK( mpi_mul_mpi( &X3, &Z3, &Z3 ) ); MOD_MUL( X3 );
MPI_CHK( mpi_mul_int( &T3, &T3, 3 ) ); MOD_ADD( T3 );
MPI_CHK( mpi_mul_mpi( &X3, &X3, &grp->A ) ); MOD_MUL( X3 );
MPI_CHK( mpi_add_mpi( &T3, &T3, &X3 ) ); MOD_ADD( T3 );
MPI_CHK( mpi_mul_mpi( &X3, &T3, &T3 ) ); MOD_MUL( X3 );
MPI_CHK( mpi_sub_mpi( &X3, &X3, &T1 ) ); MOD_SUB( X3 );
MPI_CHK( mpi_sub_mpi( &X3, &X3, &T1 ) ); MOD_SUB( X3 );
MPI_CHK( mpi_sub_mpi( &T1, &T1, &X3 ) ); MOD_SUB( T1 );
MPI_CHK( mpi_mul_mpi( &T1, &T3, &T1 ) ); MOD_MUL( T1 );
MPI_CHK( mpi_mul_int( &T3, &Y3, 8 ) ); MOD_ADD( T3 );
MPI_CHK( mpi_sub_mpi( &Y3, &T1, &T3 ) ); MOD_SUB( Y3 );
MPI_CHK( mpi_add_mpi( &T1, &P->Y, &P->Z ) ); MOD_ADD( T1 );
MPI_CHK( mpi_mul_mpi( &T1, &T1, &T1 ) ); MOD_MUL( T1 );
MPI_CHK( mpi_sub_mpi( &T1, &T1, &T2 ) ); MOD_SUB( T1 );
MPI_CHK( mpi_sub_mpi( &Z3, &T1, &Z3 ) ); MOD_SUB( Z3 );
MPI_CHK( mpi_copy( &R->X, &X3 ) );
MPI_CHK( mpi_copy( &R->Y, &Y3 ) );
MPI_CHK( mpi_copy( &R->Z, &Z3 ) );
cleanup:
mpi_free( &T1 ); mpi_free( &T2 ); mpi_free( &T3 );
mpi_free( &X3 ); mpi_free( &Y3 ); mpi_free( &Z3 );
return( ret );
}
/*
* Addition: R = P + Q, mixed affine-Jacobian coordinates (GECC 3.22)
*
* The coordinates of Q must be normalized (= affine),
* but those of P don't need to. R is not normalized.
*
* Special cases: (1) P or Q is zero, (2) R is zero, (3) P == Q.
* None of these cases can happen as intermediate step in ecp_mul():
* - at each step, P, Q and R are multiples of the base point, the factor
* being less than its order, so none of them is zero;
* - Q is an odd multiple of the base point, P an even multiple,
* due to the choice of precomputed points in the modified comb method.
* So branches for these cases do not leak secret information.
*
* Cost: 1A := 8M + 3S
*/
static int ecp_add_mixed( const ecp_group *grp, ecp_point *R,
const ecp_point *P, const ecp_point *Q )
{
int ret;
mpi T1, T2, T3, T4, X, Y, Z;
#if defined(POLARSSL_SELF_TEST)
add_count++;
#endif
/*
* Trivial cases: P == 0 or Q == 0 (case 1)
*/
if( mpi_cmp_int( &P->Z, 0 ) == 0 )
return( ecp_copy( R, Q ) );
if( mpi_cmp_int( &Q->Z, 0 ) == 0 )
return( ecp_copy( R, P ) );
/*
* Make sure Q coordinates are normalized
*/
if( mpi_cmp_int( &Q->Z, 1 ) != 0 )
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
mpi_init( &T1 ); mpi_init( &T2 ); mpi_init( &T3 ); mpi_init( &T4 );
mpi_init( &X ); mpi_init( &Y ); mpi_init( &Z );
MPI_CHK( mpi_mul_mpi( &T1, &P->Z, &P->Z ) ); MOD_MUL( T1 );
MPI_CHK( mpi_mul_mpi( &T2, &T1, &P->Z ) ); MOD_MUL( T2 );
MPI_CHK( mpi_mul_mpi( &T1, &T1, &Q->X ) ); MOD_MUL( T1 );
MPI_CHK( mpi_mul_mpi( &T2, &T2, &Q->Y ) ); MOD_MUL( T2 );
MPI_CHK( mpi_sub_mpi( &T1, &T1, &P->X ) ); MOD_SUB( T1 );
MPI_CHK( mpi_sub_mpi( &T2, &T2, &P->Y ) ); MOD_SUB( T2 );
/* Special cases (2) and (3) */
if( mpi_cmp_int( &T1, 0 ) == 0 )
{
if( mpi_cmp_int( &T2, 0 ) == 0 )
{
ret = ecp_double_jac( grp, R, P );
goto cleanup;
}
else
{
ret = ecp_set_zero( R );
goto cleanup;
}
}
MPI_CHK( mpi_mul_mpi( &Z, &P->Z, &T1 ) ); MOD_MUL( Z );
MPI_CHK( mpi_mul_mpi( &T3, &T1, &T1 ) ); MOD_MUL( T3 );
MPI_CHK( mpi_mul_mpi( &T4, &T3, &T1 ) ); MOD_MUL( T4 );
MPI_CHK( mpi_mul_mpi( &T3, &T3, &P->X ) ); MOD_MUL( T3 );
MPI_CHK( mpi_mul_int( &T1, &T3, 2 ) ); MOD_ADD( T1 );
MPI_CHK( mpi_mul_mpi( &X, &T2, &T2 ) ); MOD_MUL( X );
MPI_CHK( mpi_sub_mpi( &X, &X, &T1 ) ); MOD_SUB( X );
MPI_CHK( mpi_sub_mpi( &X, &X, &T4 ) ); MOD_SUB( X );
MPI_CHK( mpi_sub_mpi( &T3, &T3, &X ) ); MOD_SUB( T3 );
MPI_CHK( mpi_mul_mpi( &T3, &T3, &T2 ) ); MOD_MUL( T3 );
MPI_CHK( mpi_mul_mpi( &T4, &T4, &P->Y ) ); MOD_MUL( T4 );
MPI_CHK( mpi_sub_mpi( &Y, &T3, &T4 ) ); MOD_SUB( Y );
MPI_CHK( mpi_copy( &R->X, &X ) );
MPI_CHK( mpi_copy( &R->Y, &Y ) );
MPI_CHK( mpi_copy( &R->Z, &Z ) );
cleanup:
mpi_free( &T1 ); mpi_free( &T2 ); mpi_free( &T3 ); mpi_free( &T4 );
mpi_free( &X ); mpi_free( &Y ); mpi_free( &Z );
return( ret );
}
/*
* Addition: R = P + Q, result's coordinates normalized
* Cost: 1A + 1N = 1I + 11M + 4S
*/
int ecp_add( const ecp_group *grp, ecp_point *R,
const ecp_point *P, const ecp_point *Q )
{
int ret;
MPI_CHK( ecp_add_mixed( grp, R, P, Q ) );
MPI_CHK( ecp_normalize( grp, R ) );
cleanup:
return( ret );
}
/*
* Subtraction: R = P - Q, result's coordinates normalized
* Cost: 1A + 1N = 1I + 11M + 4S
*/
int ecp_sub( const ecp_group *grp, ecp_point *R,
const ecp_point *P, const ecp_point *Q )
{
int ret;
ecp_point mQ;
ecp_point_init( &mQ );
/* mQ = - Q */
ecp_copy( &mQ, Q );
if( mpi_cmp_int( &mQ.Y, 0 ) != 0 )
MPI_CHK( mpi_sub_mpi( &mQ.Y, &grp->P, &mQ.Y ) );
MPI_CHK( ecp_add_mixed( grp, R, P, &mQ ) );
MPI_CHK( ecp_normalize( grp, R ) );
cleanup:
ecp_point_free( &mQ );
return( ret );
}
/*
* Randomize jacobian coordinates:
* (X, Y, Z) -> (l^2 X, l^3 Y, l Z) for random l
* This is sort of the reverse operation of ecp_normalize().
*
* This countermeasure was first suggested in [2].
*/
static int ecp_randomize_coordinates( const ecp_group *grp, ecp_point *pt,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
{
int ret;
mpi l, ll;
size_t p_size = (grp->pbits + 7) / 8;
int count = 0;
mpi_init( &l ); mpi_init( &ll );
/* Generate l such that 1 < l < p */
do
{
mpi_fill_random( &l, p_size, f_rng, p_rng );
while( mpi_cmp_mpi( &l, &grp->P ) >= 0 )
mpi_shift_r( &l, 1 );
if( count++ > 10 )
return( POLARSSL_ERR_ECP_RANDOM_FAILED );
}
while( mpi_cmp_int( &l, 1 ) <= 0 );
/* Z = l * Z */
MPI_CHK( mpi_mul_mpi( &pt->Z, &pt->Z, &l ) ); MOD_MUL( pt->Z );
/* X = l^2 * X */
MPI_CHK( mpi_mul_mpi( &ll, &l, &l ) ); MOD_MUL( ll );
MPI_CHK( mpi_mul_mpi( &pt->X, &pt->X, &ll ) ); MOD_MUL( pt->X );
/* Y = l^3 * Y */
MPI_CHK( mpi_mul_mpi( &ll, &ll, &l ) ); MOD_MUL( ll );
MPI_CHK( mpi_mul_mpi( &pt->Y, &pt->Y, &ll ) ); MOD_MUL( pt->Y );
cleanup:
mpi_free( &l ); mpi_free( &ll );
return( ret );
}
/*
* Check and define parameters used by the comb method (see below for details)
*/
#if POLARSSL_ECP_WINDOW_SIZE < 2 || POLARSSL_ECP_WINDOW_SIZE > 7
#error "POLARSSL_ECP_WINDOW_SIZE out of bounds"
#endif
/* d = ceil( n / w ) */
#define COMB_MAX_D ( POLARSSL_ECP_MAX_BITS + 1 ) / 2
/* number of precomputed points */
#define COMB_MAX_PRE ( 1 << ( POLARSSL_ECP_WINDOW_SIZE - 1 ) )
/*
* Compute the representation of m that will be used with our comb method.
*
* The basic comb method is described in GECC 3.44 for example. We use a
* modified version that provides resistance to SPA by avoiding zero
* digits in the representation as in [3]. We modify the method further by
* requiring that all K_i be odd, which has the small cost that our
* representation uses one more K_i, due to carries.
*
* Also, for the sake of compactness, only the seven low-order bits of x[i]
* are used to represent K_i, and the msb of x[i] encodes the the sign (s_i in
* the paper): it is set if and only if if s_i == -1;
*
* Calling conventions:
* - x is an array of size d + 1
* - w is the size, ie number of teeth, of the comb, and must be between
* 2 and 7 (in practice, between 2 and POLARSSL_ECP_WINDOW_SIZE)
* - m is the MPI, expected to be odd and such that bitlength(m) <= w * d
* (the result will be incorrect if these assumptions are not satisfied)
*/
static void ecp_comb_fixed( unsigned char x[], size_t d,
unsigned char w, const mpi *m )
{
size_t i, j;
unsigned char c, cc, adjust;
memset( x, 0, d+1 );
/* First get the classical comb values (except for x_d = 0) */
for( i = 0; i < d; i++ )
for( j = 0; j < w; j++ )
x[i] |= mpi_get_bit( m, i + d * j ) << j;
/* Now make sure x_1 .. x_d are odd */
c = 0;
for( i = 1; i <= d; i++ )
{
/* Add carry and update it */
cc = x[i] & c;
x[i] = x[i] ^ c;
c = cc;
/* Adjust if needed, avoiding branches */
adjust = 1 - ( x[i] & 0x01 );
c |= x[i] & ( x[i-1] * adjust );
x[i] = x[i] ^ ( x[i-1] * adjust );
x[i-1] |= adjust << 7;
}
}
/*
* Precompute points for the comb method
*
* If i = i_{w-1} ... i_1 is the binary representation of i, then
* T[i] = i_{w-1} 2^{(w-1)d} P + ... + i_1 2^d P + P
*
* T must be able to hold 2^{w - 1} elements
*
* Cost: d(w-1) D + (2^{w-1} - 1) A + 1 N(w-1) + 1 N(2^{w-1} - 1)
*/
static int ecp_precompute_comb( const ecp_group *grp,
ecp_point T[], const ecp_point *P,
unsigned char w, size_t d )
{
int ret;
unsigned char i, k;
size_t j;
ecp_point *cur, *TT[COMB_MAX_PRE - 1];
/*
* Set T[0] = P and
* T[2^{l-1}] = 2^{dl} P for l = 1 .. w-1 (this is not the final value)
*/
MPI_CHK( ecp_copy( &T[0], P ) );
k = 0;
for( i = 1; i < ( 1U << (w-1) ); i <<= 1 )
{
cur = T + i;
MPI_CHK( ecp_copy( cur, T + ( i >> 1 ) ) );
for( j = 0; j < d; j++ )
MPI_CHK( ecp_double_jac( grp, cur, cur ) );
TT[k++] = cur;
}
ecp_normalize_many( grp, TT, k );
/*
* Compute the remaining ones using the minimal number of additions
* Be careful to update T[2^l] only after using it!
*/
k = 0;
for( i = 1; i < ( 1U << (w-1) ); i <<= 1 )
{
j = i;
while( j-- )
{
ecp_add_mixed( grp, &T[i + j], &T[j], &T[i] );
TT[k++] = &T[i + j];
}
}
ecp_normalize_many( grp, TT, k );
/*
* Post-precessing: reclaim some memory by
* - not storing Z (always 1)
* - shrinking other coordinates
* Keep the same number of limbs as P to avoid re-growing on next use.
*/
for( i = 0; i < ( 1U << (w-1) ); i++ )
{
mpi_free( &T[i].Z );
mpi_shrink( &T[i].X, grp->P.n );
mpi_shrink( &T[i].Y, grp->P.n );
}
cleanup:
return( ret );
}
/*
* Select precomputed point: R = sign(i) * T[ abs(i) / 2 ]
*/
static int ecp_select_comb( const ecp_group *grp, ecp_point *R,
const ecp_point T[], unsigned char t_len,
unsigned char i )
{
int ret;
unsigned char ii, j;
/* Ignore the "sign" bit and scale down */
ii = ( i & 0x7Fu ) >> 1;
/* Read the whole table to thwart cache-based timing attacks */
for( j = 0; j < t_len; j++ )
{
MPI_CHK( mpi_safe_cond_assign( &R->X, &T[j].X, j == ii ) );
MPI_CHK( mpi_safe_cond_assign( &R->Y, &T[j].Y, j == ii ) );
}
/* The Z coordinate is always 1 */
MPI_CHK( mpi_lset( &R->Z, 1 ) );
/* Safely invert result if i is "negative" */
MPI_CHK( ecp_safe_invert( grp, R, i >> 7 ) );
cleanup:
return( ret );
}
/*
* Core multiplication algorithm for the (modified) comb method.
* This part is actually common with the basic comb method (GECC 3.44)
*
* Cost: d A + d D + 1 R
*/
static int ecp_mul_comb_core( const ecp_group *grp, ecp_point *R,
const ecp_point T[], unsigned char t_len,
const unsigned char x[], size_t d,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng )
{
int ret;
ecp_point Txi;
size_t i;
ecp_point_init( &Txi );
/* Start with a non-zero point and randomize its coordinates */
i = d;
MPI_CHK( ecp_select_comb( grp, R, T, t_len, x[i] ) );
if( f_rng != 0 )
MPI_CHK( ecp_randomize_coordinates( grp, R, f_rng, p_rng ) );
while( i-- != 0 )
{
MPI_CHK( ecp_double_jac( grp, R, R ) );
MPI_CHK( ecp_select_comb( grp, &Txi, T, t_len, x[i] ) );
MPI_CHK( ecp_add_mixed( grp, R, R, &Txi ) );
}
cleanup:
ecp_point_free( &Txi );
return( ret );
}
/*
* Multiplication using the comb method
*/
int ecp_mul( ecp_group *grp, ecp_point *R,
const mpi *m, const ecp_point *P,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
{
int ret;
unsigned char w, m_is_odd, p_eq_g, pre_len, i;
size_t d;
unsigned char k[COMB_MAX_D + 1];
ecp_point *T;
mpi M, mm;
/*
* Sanity checks (before we even initialize anything)
*/
if( mpi_cmp_int( &P->Z, 1 ) != 0 ||
mpi_get_bit( &grp->N, 0 ) != 1 )
{
return( POLARSSL_ERR_ECP_BAD_INPUT_DATA );
}
if( ( ret = ecp_check_privkey( grp, m ) ) != 0 )
return( ret );
/* We'll need this later, but do it now to possibly avoid checking P */
p_eq_g = ( mpi_cmp_mpi( &P->Y, &grp->G.Y ) == 0 &&
mpi_cmp_mpi( &P->X, &grp->G.X ) == 0 );
if( ! p_eq_g && ( ret = ecp_check_pubkey( grp, P ) ) != 0 )
return( ret );
mpi_init( &M );
mpi_init( &mm );
/*
* Minimize the number of multiplications, that is minimize
* 10 * d * w + 18 * 2^(w-1) + 11 * d + 7 * w, with d = ceil( nbits / w )
* (see costs of the various parts, with 1S = 1M)
*/
w = grp->nbits >= 384 ? 5 : 4;
/*
* If P == G, pre-compute a bit more, since this may be re-used later.
* Just adding one ups the cost of the first mul by at most 3%.
*/
if( p_eq_g )
w++;
/*
* Make sure w is within bounds.
* (The last test is useful only for very small curves in the test suite.)
*/
if( w > POLARSSL_ECP_WINDOW_SIZE )
w = POLARSSL_ECP_WINDOW_SIZE;
if( w >= grp->nbits )
w = 2;
/* Other sizes that depend on w */
pre_len = 1U << ( w - 1 );
d = ( grp->nbits + w - 1 ) / w;
/*
* Prepare precomputed points: if P == G we want to
* use grp->T if already initialized, or initialize it.
*/
T = p_eq_g ? grp->T : NULL;
if( T == NULL )
{
T = (ecp_point *) polarssl_malloc( pre_len * sizeof( ecp_point ) );
if( T == NULL )
{
ret = POLARSSL_ERR_ECP_MALLOC_FAILED;
goto cleanup;
}
for( i = 0; i < pre_len; i++ )
ecp_point_init( &T[i] );
MPI_CHK( ecp_precompute_comb( grp, T, P, w, d ) );
if( p_eq_g )
{
grp->T = T;
grp->T_size = pre_len;
}
}
/*
* Make sure M is odd (M = m or M = N - m, since N is odd)
* using the fact that m * P = - (N - m) * P
*/
m_is_odd = ( mpi_get_bit( m, 0 ) == 1 );
MPI_CHK( mpi_copy( &M, m ) );
MPI_CHK( mpi_sub_mpi( &mm, &grp->N, m ) );
MPI_CHK( mpi_safe_cond_assign( &M, &mm, ! m_is_odd ) );
/*
* Go for comb multiplication, R = M * P
*/
ecp_comb_fixed( k, d, w, &M );
MPI_CHK( ecp_mul_comb_core( grp, R, T, pre_len, k, d, f_rng, p_rng ) );
/*
* Now get m * P from M * P and normalize it
*/
MPI_CHK( ecp_safe_invert( grp, R, ! m_is_odd ) );
MPI_CHK( ecp_normalize( grp, R ) );
cleanup:
if( T != NULL && ! p_eq_g )
{
for( i = 0; i < pre_len; i++ )
ecp_point_free( &T[i] );
polarssl_free( T );
}
mpi_free( &M );
mpi_free( &mm );
if( ret != 0 )
ecp_point_free( R );
return( ret );
}
/*
* Check that a point is valid as a public key (SEC1 3.2.3.1)
*/
int ecp_check_pubkey( const ecp_group *grp, const ecp_point *pt )
{
int ret;
mpi YY, RHS;
if( mpi_cmp_int( &pt->Z, 0 ) == 0 )
return( POLARSSL_ERR_ECP_INVALID_KEY );
/*
* pt coordinates must be normalized for our checks
*/
if( mpi_cmp_int( &pt->Z, 1 ) != 0 )
return( POLARSSL_ERR_ECP_INVALID_KEY );
if( mpi_cmp_int( &pt->X, 0 ) < 0 ||
mpi_cmp_int( &pt->Y, 0 ) < 0 ||
mpi_cmp_mpi( &pt->X, &grp->P ) >= 0 ||
mpi_cmp_mpi( &pt->Y, &grp->P ) >= 0 )
return( POLARSSL_ERR_ECP_INVALID_KEY );
mpi_init( &YY ); mpi_init( &RHS );
/*
* YY = Y^2
* RHS = X (X^2 + A) + B = X^3 + A X + B
*/
MPI_CHK( mpi_mul_mpi( &YY, &pt->Y, &pt->Y ) ); MOD_MUL( YY );
MPI_CHK( mpi_mul_mpi( &RHS, &pt->X, &pt->X ) ); MOD_MUL( RHS );
MPI_CHK( mpi_add_mpi( &RHS, &RHS, &grp->A ) ); MOD_ADD( RHS );
MPI_CHK( mpi_mul_mpi( &RHS, &RHS, &pt->X ) ); MOD_MUL( RHS );
MPI_CHK( mpi_add_mpi( &RHS, &RHS, &grp->B ) ); MOD_ADD( RHS );
if( mpi_cmp_mpi( &YY, &RHS ) != 0 )
ret = POLARSSL_ERR_ECP_INVALID_KEY;
cleanup:
mpi_free( &YY ); mpi_free( &RHS );
return( ret );
}
/*
* Check that an mpi is valid as a private key (SEC1 3.2)
*/
int ecp_check_privkey( const ecp_group *grp, const mpi *d )
{
/* We want 1 <= d <= N-1 */
if ( mpi_cmp_int( d, 1 ) < 0 || mpi_cmp_mpi( d, &grp->N ) >= 0 )
return( POLARSSL_ERR_ECP_INVALID_KEY );
return( 0 );
}
/*
* Generate a keypair (SEC1 3.2.1)
*/
int ecp_gen_keypair( ecp_group *grp, mpi *d, ecp_point *Q,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng )
{
int count = 0;
size_t n_size = (grp->nbits + 7) / 8;
/*
* Generate d such that 1 <= n < N
*/
do
{
mpi_fill_random( d, n_size, f_rng, p_rng );
while( mpi_cmp_mpi( d, &grp->N ) >= 0 )
mpi_shift_r( d, 1 );
if( count++ > 10 )
return( POLARSSL_ERR_ECP_RANDOM_FAILED );
}
while( mpi_cmp_int( d, 1 ) < 0 );
return( ecp_mul( grp, Q, d, &grp->G, f_rng, p_rng ) );
}
#if defined(POLARSSL_ECP_NIST_OPTIM)
/*
* Fast reduction modulo the primes used by the NIST curves.
*
* These functions are: critical for speed, but not need for correct
* operations. So, we make the choice to heavily rely on the internals of our
* bignum library, which creates a tight coupling between these functions and
* our MPI implementation. However, the coupling between the ECP module and
* MPI remains loose, since these functions can be deactivated at will.
*/
#if defined(POLARSSL_ECP_DP_SECP192R1_ENABLED)
/*
* Compared to the way things are presented in FIPS 186-3 D.2,
* we proceed in columns, from right (least significant chunk) to left,
* adding chunks to N in place, and keeping a carry for the next chunk.
* This avoids moving things around in memory, and uselessly adding zeros,
* compared to the more straightforward, line-oriented approach.
*
* For this prime we need to handle data in chunks of 64 bits.
* Since this is always a multiple of our basic t_uint, we can
* use a t_uint * to designate such a chunk, and small loops to handle it.
*/
/* Add 64-bit chunks (dst += src) and update carry */
static inline void add64( t_uint *dst, t_uint *src, t_uint *carry )
{
unsigned char i;
t_uint c = 0;
for( i = 0; i < 8 / sizeof( t_uint ); i++, dst++, src++ )
{
*dst += c; c = ( *dst < c );
*dst += *src; c += ( *dst < *src );
}
*carry += c;
}
/* Add carry to a 64-bit chunk and update carry */
static inline void carry64( t_uint *dst, t_uint *carry )
{
unsigned char i;
for( i = 0; i < 8 / sizeof( t_uint ); i++, dst++ )
{
*dst += *carry;
*carry = ( *dst < *carry );
}
}
#define WIDTH 8 / sizeof( t_uint )
#define A( i ) N->p + i * WIDTH
#define ADD( i ) add64( p, A( i ), &c )
#define NEXT p += WIDTH; carry64( p, &c )
#define LAST p += WIDTH; *p = c; while( ++p < end ) *p = 0
/*
* Fast quasi-reduction modulo p192 (FIPS 186-3 D.2.1)
*/
static int ecp_mod_p192( mpi *N )
{
int ret;
t_uint c = 0;
t_uint *p, *end;
/* Make sure we have enough blocks so that A(5) is legal */
MPI_CHK( mpi_grow( N, 6 * WIDTH ) );
p = N->p;
end = p + N->n;
ADD( 3 ); ADD( 5 ); NEXT; // A0 += A3 + A5
ADD( 3 ); ADD( 4 ); ADD( 5 ); NEXT; // A1 += A3 + A4 + A5
ADD( 4 ); ADD( 5 ); LAST; // A2 += A4 + A5
cleanup:
return( ret );
}
#undef WIDTH
#undef A
#undef ADD
#undef NEXT
#undef LAST
#endif /* POLARSSL_ECP_DP_SECP192R1_ENABLED */
#if defined(POLARSSL_ECP_DP_SECP224R1_ENABLED) || \
defined(POLARSSL_ECP_DP_SECP256R1_ENABLED) || \
defined(POLARSSL_ECP_DP_SECP384R1_ENABLED)
/*
* The reader is advised to first understand ecp_mod_p192() since the same
* general structure is used here, but with additional complications:
* (1) chunks of 32 bits, and (2) subtractions.
*/
/*
* For these primes, we need to handle data in chunks of 32 bits.
* This makes it more complicated if we use 64 bits limbs in MPI,
* which prevents us from using a uniform access method as for p192.
*
* So, we define a mini abstraction layer to access 32 bit chunks,
* load them in 'cur' for work, and store them back from 'cur' when done.
*
* While at it, also define the size of N in terms of 32-bit chunks.
*/
#define LOAD32 cur = A( i );
#if defined(POLARSSL_HAVE_INT8) /* 8 bit */
#define MAX32 N->n / 4
#define A( j ) (uint32_t)( N->p[4*j+0] ) | \
( N->p[4*j+1] << 8 ) | \
( N->p[4*j+2] << 16 ) | \
( N->p[4*j+3] << 24 )
#define STORE32 N->p[4*i+0] = (t_uint)( cur ); \
N->p[4*i+1] = (t_uint)( cur >> 8 ); \
N->p[4*i+2] = (t_uint)( cur >> 16 ); \
N->p[4*i+3] = (t_uint)( cur >> 24 );
#elif defined(POLARSSL_HAVE_INT16) /* 16 bit */
#define MAX32 N->n / 2
#define A( j ) (uint32_t)( N->p[2*j] ) | ( N->p[2*j+1] << 16 )
#define STORE32 N->p[2*i+0] = (t_uint)( cur ); \
N->p[2*i+1] = (t_uint)( cur >> 16 );
#elif defined(POLARSSL_HAVE_INT32) /* 32 bit */
#define MAX32 N->n
#define A( j ) N->p[j]
#define STORE32 N->p[i] = cur;
#else /* 64-bit */
#define MAX32 N->n * 2
#define A( j ) j % 2 ? (uint32_t)( N->p[j/2] >> 32 ) : (uint32_t)( N->p[j/2] )
#define STORE32 \
if( i % 2 ) { \
N->p[i/2] &= 0x00000000FFFFFFFF; \
N->p[i/2] |= ((t_uint) cur) << 32; \
} else { \
N->p[i/2] &= 0xFFFFFFFF00000000; \
N->p[i/2] |= (t_uint) cur; \
}
#endif /* sizeof( t_uint ) */
/*
* Helpers for addition and subtraction of chunks, with signed carry.
*/
static inline void add32( uint32_t *dst, uint32_t src, signed char *carry )
{
*dst += src;
*carry += ( *dst < src );
}
static inline void sub32( uint32_t *dst, uint32_t src, signed char *carry )
{
*carry -= ( *dst < src );
*dst -= src;
}
#define ADD( j ) add32( &cur, A( j ), &c );
#define SUB( j ) sub32( &cur, A( j ), &c );
/*
* Helpers for the main 'loop'
* (see fix_negative for the motivation of C)
*/
#define INIT( b ) \
int ret; \
signed char c = 0, cc; \
uint32_t cur; \
size_t i = 0, bits = b; \
mpi C; \
t_uint Cp[ b / 8 / sizeof( t_uint) + 1 ]; \
\
C.s = 1; \
C.n = b / 8 / sizeof( t_uint) + 1; \
C.p = Cp; \
memset( Cp, 0, C.n * sizeof( t_uint ) ); \
\
MPI_CHK( mpi_grow( N, b * 2 / 8 / sizeof( t_uint ) ) ); \
LOAD32;
#define NEXT \
STORE32; i++; LOAD32; \
cc = c; c = 0; \
if( cc < 0 ) \
sub32( &cur, -cc, &c ); \
else \
add32( &cur, cc, &c ); \
#define LAST \
STORE32; i++; \
cur = c > 0 ? c : 0; STORE32; \
cur = 0; while( ++i < MAX32 ) { STORE32; } \
if( c < 0 ) fix_negative( N, c, &C, bits );
/*
* If the result is negative, we get it in the form
* c * 2^(bits + 32) + N, with c negative and N positive shorter than 'bits'
*/
static inline int fix_negative( mpi *N, signed char c, mpi *C, size_t bits )
{
int ret;
/* C = - c * 2^(bits + 32) */
#if !defined(POLARSSL_HAVE_INT64)
((void) bits);
#else
if( bits == 224 )
C->p[ C->n - 1 ] = ((t_uint) -c) << 32;
else
#endif
C->p[ C->n - 1 ] = (t_uint) -c;
/* N = - ( C - N ) */
MPI_CHK( mpi_sub_abs( N, C, N ) );
N->s = -1;
cleanup:
return( ret );
}
#if defined(POLARSSL_ECP_DP_SECP224R1_ENABLED)
/*
* Fast quasi-reduction modulo p224 (FIPS 186-3 D.2.2)
*/
static int ecp_mod_p224( mpi *N )
{
INIT( 224 );
SUB( 7 ); SUB( 11 ); NEXT; // A0 += -A7 - A11
SUB( 8 ); SUB( 12 ); NEXT; // A1 += -A8 - A12
SUB( 9 ); SUB( 13 ); NEXT; // A2 += -A9 - A13
SUB( 10 ); ADD( 7 ); ADD( 11 ); NEXT; // A3 += -A10 + A7 + A11
SUB( 11 ); ADD( 8 ); ADD( 12 ); NEXT; // A4 += -A11 + A8 + A12
SUB( 12 ); ADD( 9 ); ADD( 13 ); NEXT; // A5 += -A12 + A9 + A13
SUB( 13 ); ADD( 10 ); LAST; // A6 += -A13 + A10
cleanup:
return( ret );
}
#endif /* POLARSSL_ECP_DP_SECP224R1_ENABLED */
#if defined(POLARSSL_ECP_DP_SECP256R1_ENABLED)
/*
* Fast quasi-reduction modulo p256 (FIPS 186-3 D.2.3)
*/
static int ecp_mod_p256( mpi *N )
{
INIT( 256 );
ADD( 8 ); ADD( 9 );
SUB( 11 ); SUB( 12 ); SUB( 13 ); SUB( 14 ); NEXT; // A0
ADD( 9 ); ADD( 10 );
SUB( 12 ); SUB( 13 ); SUB( 14 ); SUB( 15 ); NEXT; // A1
ADD( 10 ); ADD( 11 );
SUB( 13 ); SUB( 14 ); SUB( 15 ); NEXT; // A2
ADD( 11 ); ADD( 11 ); ADD( 12 ); ADD( 12 ); ADD( 13 );
SUB( 15 ); SUB( 8 ); SUB( 9 ); NEXT; // A3
ADD( 12 ); ADD( 12 ); ADD( 13 ); ADD( 13 ); ADD( 14 );
SUB( 9 ); SUB( 10 ); NEXT; // A4
ADD( 13 ); ADD( 13 ); ADD( 14 ); ADD( 14 ); ADD( 15 );
SUB( 10 ); SUB( 11 ); NEXT; // A5
ADD( 14 ); ADD( 14 ); ADD( 15 ); ADD( 15 ); ADD( 14 ); ADD( 13 );
SUB( 8 ); SUB( 9 ); NEXT; // A6
ADD( 15 ); ADD( 15 ); ADD( 15 ); ADD( 8 );
SUB( 10 ); SUB( 11 ); SUB( 12 ); SUB( 13 ); LAST; // A7
cleanup:
return( ret );
}
#endif /* POLARSSL_ECP_DP_SECP256R1_ENABLED */
#if defined(POLARSSL_ECP_DP_SECP384R1_ENABLED)
/*
* Fast quasi-reduction modulo p384 (FIPS 186-3 D.2.4)
*/
static int ecp_mod_p384( mpi *N )
{
INIT( 384 );
ADD( 12 ); ADD( 21 ); ADD( 20 );
SUB( 23 ); NEXT; // A0
ADD( 13 ); ADD( 22 ); ADD( 23 );
SUB( 12 ); SUB( 20 ); NEXT; // A2
ADD( 14 ); ADD( 23 );
SUB( 13 ); SUB( 21 ); NEXT; // A2
ADD( 15 ); ADD( 12 ); ADD( 20 ); ADD( 21 );
SUB( 14 ); SUB( 22 ); SUB( 23 ); NEXT; // A3
ADD( 21 ); ADD( 21 ); ADD( 16 ); ADD( 13 ); ADD( 12 ); ADD( 20 ); ADD( 22 );
SUB( 15 ); SUB( 23 ); SUB( 23 ); NEXT; // A4
ADD( 22 ); ADD( 22 ); ADD( 17 ); ADD( 14 ); ADD( 13 ); ADD( 21 ); ADD( 23 );
SUB( 16 ); NEXT; // A5
ADD( 23 ); ADD( 23 ); ADD( 18 ); ADD( 15 ); ADD( 14 ); ADD( 22 );
SUB( 17 ); NEXT; // A6
ADD( 19 ); ADD( 16 ); ADD( 15 ); ADD( 23 );
SUB( 18 ); NEXT; // A7
ADD( 20 ); ADD( 17 ); ADD( 16 );
SUB( 19 ); NEXT; // A8
ADD( 21 ); ADD( 18 ); ADD( 17 );
SUB( 20 ); NEXT; // A9
ADD( 22 ); ADD( 19 ); ADD( 18 );
SUB( 21 ); NEXT; // A10
ADD( 23 ); ADD( 20 ); ADD( 19 );
SUB( 22 ); LAST; // A11
cleanup:
return( ret );
}
#endif /* POLARSSL_ECP_DP_SECP384R1_ENABLED */
#undef A
#undef LOAD32
#undef STORE32
#undef MAX32
#undef INIT
#undef NEXT
#undef LAST
#endif /* POLARSSL_ECP_DP_SECP224R1_ENABLED ||
POLARSSL_ECP_DP_SECP256R1_ENABLED ||
POLARSSL_ECP_DP_SECP384R1_ENABLED */
#if defined(POLARSSL_ECP_DP_SECP521R1_ENABLED)
/*
* Here we have an actual Mersenne prime, so things are more straightforward.
* However, chunks are aligned on a 'weird' boundary (521 bits).
*/
/* Size of p521 in terms of t_uint */
#define P521_WIDTH ( 521 / 8 / sizeof( t_uint ) + 1 )
/* Bits to keep in the most significant t_uint */
#if defined(POLARSSL_HAVE_INT8)
#define P521_MASK 0x01
#else
#define P521_MASK 0x01FF
#endif
/*
* Fast quasi-reduction modulo p521 (FIPS 186-3 D.2.5)
* Write N as A1 + 2^521 A0, return A0 + A1
*/
static int ecp_mod_p521( mpi *N )
{
int ret;
size_t i;
mpi M;
t_uint Mp[P521_WIDTH + 1];
/* Worst case for the size of M is when t_uint is 16 bits:
* we need to hold bits 513 to 1056, which is 34 limbs, that is
* P521_WIDTH + 1. Otherwise P521_WIDTH is enough. */
if( N->n < P521_WIDTH )
return( 0 );
/* M = A1 */
M.s = 1;
M.n = N->n - ( P521_WIDTH - 1 );
if( M.n > P521_WIDTH + 1 )
M.n = P521_WIDTH + 1;
M.p = Mp;
memcpy( Mp, N->p + P521_WIDTH - 1, M.n * sizeof( t_uint ) );
MPI_CHK( mpi_shift_r( &M, 521 % ( 8 * sizeof( t_uint ) ) ) );
/* N = A0 */
N->p[P521_WIDTH - 1] &= P521_MASK;
for( i = P521_WIDTH; i < N->n; i++ )
N->p[i] = 0;
/* N = A0 + A1 */
MPI_CHK( mpi_add_abs( N, N, &M ) );
cleanup:
return( ret );
}
#undef P521_WIDTH
#undef P521_MASK
#endif /* POLARSSL_ECP_DP_SECP521R1_ENABLED */
#endif /* POLARSSL_ECP_NIST_OPTIM */
#if defined(POLARSSL_SELF_TEST)
/*
* Checkup routine
*/
int ecp_self_test( int verbose )
{
int ret;
size_t i;
ecp_group grp;
ecp_point R, P;
mpi m;
unsigned long add_c_prev, dbl_c_prev, mul_c_prev;
/* exponents especially adapted for secp192r1 */
const char *exponents[] =
{
"000000000000000000000000000000000000000000000001", /* one */
"FFFFFFFFFFFFFFFFFFFFFFFF99DEF836146BC9B1B4D22830", /* N - 1 */
"5EA6F389A38B8BC81E767753B15AA5569E1782E30ABE7D25", /* random */
"400000000000000000000000000000000000000000000000", /* one and zeros */
"7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF", /* all ones */
"555555555555555555555555555555555555555555555555", /* 101010... */
};
ecp_group_init( &grp );
ecp_point_init( &R );
ecp_point_init( &P );
mpi_init( &m );
/* Use secp192r1 if available, or any available curve */
#if defined(POLARSSL_ECP_DP_SECP192R1_ENABLED)
MPI_CHK( ecp_use_known_dp( &grp, POLARSSL_ECP_DP_SECP192R1 ) );
#else
MPI_CHK( ecp_use_known_dp( &grp, ecp_curve_list()->grp_id ) );
#endif
if( verbose != 0 )
printf( " ECP test #1 (constant op_count, base point G): " );
/* Do a dummy multiplication first to trigger precomputation */
MPI_CHK( mpi_lset( &m, 2 ) );
MPI_CHK( ecp_mul( &grp, &P, &m, &grp.G, NULL, NULL ) );
add_count = 0;
dbl_count = 0;
mul_count = 0;
MPI_CHK( mpi_read_string( &m, 16, exponents[0] ) );
MPI_CHK( ecp_mul( &grp, &R, &m, &grp.G, NULL, NULL ) );
for( i = 1; i < sizeof( exponents ) / sizeof( exponents[0] ); i++ )
{
add_c_prev = add_count;
dbl_c_prev = dbl_count;
mul_c_prev = mul_count;
add_count = 0;
dbl_count = 0;
mul_count = 0;
MPI_CHK( mpi_read_string( &m, 16, exponents[i] ) );
MPI_CHK( ecp_mul( &grp, &R, &m, &grp.G, NULL, NULL ) );
if( add_count != add_c_prev ||
dbl_count != dbl_c_prev ||
mul_count != mul_c_prev )
{
if( verbose != 0 )
printf( "failed (%zu)\n", i );
ret = 1;
goto cleanup;
}
}
if( verbose != 0 )
printf( "passed\n" );
if( verbose != 0 )
printf( " ECP test #2 (constant op_count, other point): " );
/* We computed P = 2G last time, use it */
add_count = 0;
dbl_count = 0;
mul_count = 0;
MPI_CHK( mpi_read_string( &m, 16, exponents[0] ) );
MPI_CHK( ecp_mul( &grp, &R, &m, &P, NULL, NULL ) );
for( i = 1; i < sizeof( exponents ) / sizeof( exponents[0] ); i++ )
{
add_c_prev = add_count;
dbl_c_prev = dbl_count;
mul_c_prev = mul_count;
add_count = 0;
dbl_count = 0;
mul_count = 0;
MPI_CHK( mpi_read_string( &m, 16, exponents[i] ) );
MPI_CHK( ecp_mul( &grp, &R, &m, &P, NULL, NULL ) );
if( add_count != add_c_prev ||
dbl_count != dbl_c_prev ||
mul_count != mul_c_prev )
{
if( verbose != 0 )
printf( "failed (%zu)\n", i );
ret = 1;
goto cleanup;
}
}
if( verbose != 0 )
printf( "passed\n" );
cleanup:
if( ret < 0 && verbose != 0 )
printf( "Unexpected error, return code = %08X\n", ret );
ecp_group_free( &grp );
ecp_point_free( &R );
ecp_point_free( &P );
mpi_free( &m );
if( verbose != 0 )
printf( "\n" );
return( ret );
}
#endif
#endif