* refactor: clean up controller settings ui
- Remove inconsistencies between left and right side
- Use style to set ToggleButton properties (since they are all the same)
- Move topmost controller settings from one line to 2x2 grid for improved clarity
- Properly adjust borders, text widths, etc. to neighboring elements to eliminate misaligned visual lines
* fix: merge issues
* fix: prevent sliders from jumping by giving text block fixed width
* refactor: add more separators and increase margin
* refactor: center deadzone and range descriptions
* refactor: move rumble border top margin to -1 and prevent double border
* refactor: remove margins & double borders + switch profile & input selection
* style: apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* amadeus: Fix wrong channel mapping check
This was always going to happens, as a result quadratic would break and
move index after the channel count point, effectively breaking
input/output indices.
* amadeus: Fix reverb 3d early delay wrong output index
* Fix the issue of unequal check for amiibo file date due to the lack of sub-second units in the header, causing slow opening of the amiibo interface.
* Supplement the unrepaired.
This fixes a potential issue where a shader lookup could match the address of a previous _different_ shader, but that shader is now partially unmapped. This would just crash with an invalid region exception.
To compare a shader in the address cache with one in memory, we get the memory at the location with the previous shader's size. However, it's possible it has been unmapped and then remapped with a smaller size. In this case, we should just get back the mapped portion of the shader, which will then fail the comparison immediately and get to compile/lookup for the new one.
This might fix a random crash in TOTK that was reported by Piplup. I don't know if it does, because I don't have the game yet.
* Add build config and extra args to create_macos_build.sh
* Use matrix strategy for releases
* Add macOS jobs
Co-authored-by: Mary <thog@protonmail.com>
* Fix wrong version argument
* Fix check for the correct amount of args
* Install latest rcodesign release
Co-authored-by: Mary <thog@protonmail.com>
* Set executable bits for PR builds on linux
---------
Co-authored-by: Mary <thog@protonmail.com>
Command buffer errors currently trigger an exception "DeviceLost" crashing the process.
Looking at [MKV's code](53a4eb26f2/MoltenVK/MoltenVK/GPUObjects/MVKQueue.mm (L392-L408)) we observe that:
- It hard fails if error is:
```
MTLCommandBufferErrorBlacklisted || MTLCommandBufferErrorNotPermitted || MTLCommandBufferErrorDeviceRemoved
```
- Otherwise fails conditionally if `config.resumeLostDevice == false` (current default)
For Ryujinx's use-case it's more graceful to resume on those errors rather than crashing the app, the error isn't totally silenced since `mvk` still logs it
Fixes#4704, #4575
* Vulkan: Batch vertex buffer updates
Some games can bind a large number of vertex buffers for draws. This PR allows for vertex buffers to be updated with one call rather than one per buffer.
This mostly affects the AMD Mesa driver, the testing platform was Steam Deck with Super Mario Odyssey. It was taking about 12% before, should be greatly reduced now.
A small optimization has been added to avoid looking up the same buffer multiple times, as a common pattern is for the same buffer to be bound many times in a row with different ranges.
* Only rebind vertex buffers if they have changed
* Address feedback
* Ava: Fix SystemTimeOffset calculation
During testing of #4822, Mary pointed out the way we calculate time offset is wrong in our Avalonia UI. This PR fixed that.
The axaml file is autoformatted too.
* DateTime.Now in local var
* time: Update for 15.0.0 changes
Last time we did an upgrade on the time service was during 9.x era, it was about time to take back that reverse again!
15.0.0 added a new structure on the shared memory to get steady clock raw timepoints with a granularity in nanoseconds.
This commit implements this new part.
I plan to write a follow up with a bit of refactoring of this ancient part of the emulator.
As always, reverse and work done by your truly.
PS: As a reminder, if this change is reused anywhere else, work should be credited as Ryujinx and not my person.
* time: Do not set setup value to posix time
This should fix local and network clock returning 0 under usage with
shared memory.
This probably fix#2430.
* Address gdkchan's comment
* Fix internal offset not working since changes and ensure that user clock have a valid clock id
* time: Report auto correcting clock and hardcode steady clock unique id
Fix Pokemon Sword Pokejobs for real.
* Address gdkchan's comment
* Ava UI: Expose games build ID for cheat management
* Fix bad merge
* Change integrity check level to error on invalid
* Add support for GDK
* Remove whitespace
* Add BID identifier
* PR Comments fix
* Restore title id in cheats GTK window
* use halign center instead of margin_left
* Merge
* fix after merge
* PR comments fix - design AVA
* PR fix - Move GetApplicationBuildId to ApplicationData class
* PR comment fix - Add empty line before method
* Align with PR #4755
* PR comments fix
* Change BuildId label to support translation
* Comments fix
* Remove unused BuildIdLabel property
* feat: introduce new shader loading state for progress tracking when writing shaders to disk
* fix: move translation to bottom of locale file
* fix: change back to foreach and add requested spacing between lines
* style: fix formatting
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* AM: Stub some service call
Some IPC I have stubbed during private testing and I don't want to deal with them anymore. Nothing more.
* ICommonStateGetter disposable
* GPU: Remove CPU region handle containers.
Another one for the "I don't know why I didn't do this earlier" pile.
This removes the "Cpu" prefixed region handle classes, which each mirror a region handle type from Ryujinx.Memory.
Originally, not all projects had a reference to Ryujinx.Memory, so these classes were introduced to bridge the gap. Someone else crossed that bridge since, so these classes don't have much of a purpose anymore.
This PR replaces all uses of CpuRegionHandle etc to their direct Ryujinx.Memory versions.
RegionHandle methods (specifically QueryModified) are about the hottest path there is in the entire emulator, so there is a nice boost from doing this.
* Add docs
* UI: Fix sections extraction
There is currently an issue when the update NCA doesn't contains the section we want to extract, this is fixed by adding a check.
I have fixed the inverted handler of ExeFs/Logo introduced in #4755.
Fixes#4521
* Addresses feedback
* Allow any shader SSBO constant buffer slot and offset
* Fix slot value passed to SetUsedStorageBuffer on fallback case
* Shader cache version
* Ensure that the storage buffer source constant buffer offset is word aligned
* Fix FirstBinding on GetUniformBufferDescriptors
* GPU: Allow granular buffer updates from the constant buffer updater
Sometimes, constant buffer updates can't be avoided, either due to a cb0 access that cannot be eliminated, or the game updating a buffer between draws to the detriment of everyone.
To avoid uploading the full 4096 bytes each time, this PR remembers the offset and size containing all constant buffer updates since the last sync. It will then upload that range after sync.
* Allow clearing the dirty range
* Always use precise
Might want to not do this if distance between the existing range and new one is too high.
* Use old force dirty mechanism when distance between regions is too great
* Update src/Ryujinx.Graphics.Gpu/Memory/Buffer.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Fix inheritance of _dirtyStart and _dirtyEnd
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Fix case sensitivity for mod subdirectories
* Small refactoring of ModLoader
* Don't share instruction list between all cheats
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* fix: linux launcher breaks when there are spaces in the directory path
* Add quotes around $0 as well
---------
Co-authored-by: TSRBerry <20988865+TSRBerry@users.noreply.github.com>
* UI: Move ApplicationContextMenu in a separated class
This PR remove duplicated code related to the context menu on the Application list/grid by create a control for the menu which include related handler.
I've renamed "GameList/GameGrid" by "Application" for consistencies. And I've removed all uneeded field from the project file too.
While I cleaned up things, I've found an issue about purging Ptc/Shader cache, both methods list files even if the user say "No", shader cache is purged even if the user say "No". It's fixed.
* Adresses feedbacks
Our Vulkan backend inserts image barriers when a texture is sampled after it is rendered. This is done via a "modification flag" which is set when a render target is unbound (presuming that a texture has finished drawing to it).
Imagine the following scenario:
- Game sets render target to texture A
- Game renders to texture A
- (render pass ends)
- Game binds texture A to a sampler
- Game sets render target to texture B
- Renders to texture B using texture A (barrier required)
Because of the previous behaviour, the check to add a barrier for sampling a texture actually happens before it is registered as modified, meaning no barrier was added at all. This isn't always the case, but it was definitely causing issues in Xenoblade 2.
This doesn't fix any more complicated issues where a texture is repeatedly sampled while it is currently being rendered.
Fixes visual glitches at lower resolutions in Xenoblade 2. May fix other cases.
* Add hide-cursor command line argument
* gtk: Adjust SettingsWindow for hide cursor options
* ava: Adjust SettingsWindow for hide cursor options
* ava: Add override check for HideCursor arg
* Remove copy&paste sins
* ava: Leave a little more room between the options
* gtk: Fix hide cursor issues
* ava: Only hide cursor if it's within the embedded window
* GPU: Keep sampled textures without any pool references alive
Occasionally games are very wasteful and clear/write to a texture without ever sampling it. As rendered textures in NVN games seem to all have overlapping memory ranges, the texture will eventually get overwritten.
Normally, this would trigger a removal from the auto delete cache, but a pool entry would keep the texture alive. However, with these textures that are never used, they will get deleted immediately and recreated on the next frame.
This change makes it so the ShortTextureCache can keep textures that have naver had a pool reference alive for a few frames, so they're not constantly being created and deleted.
This improves performance in Zelda BOTW a little.
* Cleanup
* WIP texture pre-flush
Improve performance of TextureView GetData to buffer
Fix copy/sync ordering
Fix minor bug
Make this actually work
WIP host mapping stuff
* Fix usage flags
* message
* Cleanup 1
* Fix rebase
* Fix
* Improve pre-flush rules
* Fix pre-flush
* A lot of cleanup
* Use the host memory bits
* Select the correct memory type
* Cleanup TextureGroupHandle
* Missing comment
* Remove debugging logs
* Revert BufferHandle _value access modifier
* One interrupt action at a time.
* Support D32S8 to D24S8 conversion, safeguards
* Interrupt cannot happen in sync handle's lock
Waitable needs to be checked twice now, but this should stop it from deadlocking.
* Remove unused using
* Address some feedback
* Address feedback
* Address more feedback
* Address more feedback
* Improve sync rules
Should allow for faster sync in some cases.
* GPU: Fix errors handling texture remapping
- Fixes an error where a pool entry and memory mapping changing at the same time could cause a texture to rebind its data from the wrong GPU VA (data swaps)
- Fixes an error where the texture pool could act on a mapping change before the mapping has actually been changed ("Unmapped" event happens before change, we need to signal it changed _after_ it completes)
TODO: remove textures from partially mapped list... if they aren't.
* Add Remap actions for handling post-mapping behaviours
* Remove unused code.
* Address feedback
* Nit
