Commit graph

176 commits

Author SHA1 Message Date
riperiperi f3cc2e5703
GPU: Access non-prefetch command buffers directly (#3882)
* GPU: Access non-prefetch command buffers directly

Saves allocating new arrays for them constantly - they can be quite small so it can be very wasteful. About 0.4% of GPU thread in SMO, but was a bit higher in S/V when I checked.

Assumes that non-prefetch command buffers won't be randomly clobbered before they finish executing, though that's probably a safe bet.

* Small change while I'm here

* Address feedback
2022-11-24 01:56:55 +00:00
gdkchan f088c3d344
Do not update shader state for DrawTextures (#3876) 2022-11-21 18:16:00 +01:00
riperiperi 33a4d7d1ba
GPU: Eliminate CB0 accesses when storage buffer accesses are resolved (#3847)
* Eliminate CB0 accesses

Still some work to do, decouple from hle?

* Forgot the important part somehow

* Fix and improve alignment test

* Address Feedback

* Remove some complexity when checking storage buffer alignment

* Update Ryujinx.Graphics.Shader/Translation/Optimizations/GlobalToStorage.cs

Co-authored-by: gdkchan <gab.dark.100@gmail.com>

Co-authored-by: gdkchan <gab.dark.100@gmail.com>
2022-11-17 18:47:41 +01:00
gdkchan f1d1670b0b
Implement HLE macro for DrawElementsIndirect (#3748)
* Implement HLE macro for DrawElementsIndirect

* Shader cache version bump

* Use GL_ARB_shader_draw_parameters extension on OpenGL

* Fix DrawIndexedIndirectCount on Vulkan when extension is not supported

* Implement DrawIndex

* Alignment

* Fix some validation errors

* Rename BaseIds to DrawParameters

* Fix incorrect index buffer and vertex buffer size in some cases

* Add HLE macros for DrawArraysInstanced and DrawElementsInstanced

* Perform a regular draw when indirect data is not modified

* Use non-indirect draw methods if indirect buffer was not GPU modified

* Only check if draw parameters match if the shader actually uses them

* Expose Macro HLE setting on GUI

* Reset FirstVertex and FirstInstance after draw

* Update shader cache version again since some people already tested this

* PR feedback

Co-authored-by: riperiperi <rhy3756547@hotmail.com>
2022-11-16 14:53:04 -03:00
gdkchan 647de4cd31
Ensure all pending draws are done before compute dispatch (#3822) 2022-11-03 19:54:30 -03:00
riperiperi bf77d1cab9
GPU: Pass SpanOrArray for Texture SetData to avoid copy (#3745)
* GPU: Pass SpanOrArray for Texture SetData to avoid copy

Texture data is often converted before upload, meaning that an array was allocated to perform the conversion into. However, the backend SetData methods were being passed a Span of that data, and the Multithreaded layer does `ToArray()` on it so that it can be stored for later! This method can't extract the original array, so it creates a copy.

This PR changes the type passed for textures to a new ref struct called SpanOrArray, which is backed by either a ReadOnlySpan or an array. The benefit here is that we can have a ToArray method that doesn't copy if it is originally backed by an array.

This will also avoid a copy when running the ASTC decoder.

On NieR this was taking 38% of texture upload time, which it does a _lot_ of when you move between areas, so there should be a 1.6x performance boost when strictly uploading textures. No doubt this will also improve texture streaming performance in UE4 games, and maybe a small reduction with video playback.

From the numbers, it's probably possible to improve the upload rate by a further 1.6x by performing layout conversion on GPU. I'm not sure if we could improve it further than that - multithreading conversion on CPU would probably result in memory bottleneck.

This doesn't extend to buffers, since we don't convert their data on the GPU emulator side.

* Remove implicit cast to array.
2022-10-08 12:04:47 -03:00
riperiperi 36172ab43b
Scale SamplesPassed counter by RT scale on report (#3680)
* Scale SamplesPassed counter by RT scale on report

Adds a scale factor for samples passed counter report based on the render target scale at the time. This ensures that when a game reads this counter, it appears similar to the result at 1x.

This doesn't cover cases where the the render target scale changes during the queried draws, though that might be better to handle along with other scope related issues in a future rework of counters. Games generally don't count for occlusion queries over render target changes anyways.

Fixes an issue in the Splatoon games where the special charge would scale too quickly at high res, points at the end of the game would be broken (but still provide a correct winner), and playing at a low res would make it impossible to swim in ink.

May also affect LOD scaling in The Witcher 3.

* Update Ryujinx.Graphics.Gpu/Engine/Threed/SemaphoreUpdater.cs

Co-authored-by: gdkchan <gab.dark.100@gmail.com>

Co-authored-by: gdkchan <gab.dark.100@gmail.com>
2022-09-11 15:58:15 +00:00
gdkchan 923089a298
Fast path for Inline-to-Memory texture data transfers (#3610)
* Fast path for Inline-to-Memory texture data transfers

* Only do it for block linear textures to be on the safe side
2022-08-26 02:16:41 +00:00
gdkchan 88a0e720cb
Use RGBA16 vertex format if RGB16 is not supported on Vulkan (#3552)
* Use RGBA16 vertex format if RGB16 is not supported on Vulkan

* Catch all shader compilation exceptions
2022-08-20 16:20:27 -03:00
Nicholas Rodine 951700fdd8
Removed unused usings. (#3593)
* Removed unused usings.

* Added back using, now that it's used.

* Removed extra whitespace.
2022-08-18 18:04:54 +02:00
gdkchan ad47bd2d4e
Fix blend with RGBX color formats (#3553) 2022-08-11 18:23:25 -03:00
gdkchan a5ff0024fb
Rename ToSpan to AsSpan (#3556) 2022-08-11 18:07:37 -03:00
gdkchan 1080f64df9
Implement HLE macros for render target clears (#3528)
* Implement HLE macros for render target clears

* Add constants for the offsets
2022-08-04 21:30:08 +00:00
gdkchan 2232e4ae87
Vulkan backend (#2518)
* WIP Vulkan implementation

* No need to initialize attributes on the SPIR-V backend anymore

* Allow multithreading shaderc and vkCreateShaderModule

You'll only really see the benefit here with threaded-gal or parallel shader cache compile.

Fix shaderc multithreaded changes

Thread safety for shaderc Options constructor

Dunno how they managed to make a constructor not thread safe, but you do you. May avoid some freezes.

* Support multiple levels/layers for blit.

Fixes MK8D when scaled, maybe a few other games. AMD software "safe" blit not supported right now.

* TextureStorage should hold a ref of the foreign storage, otherwise it might be freed while in use

* New depth-stencil blit method for AMD

* Workaround for AMD driver bug

* Fix some tessellation related issues (still doesn't work?)

* Submit command buffer before Texture GetData. (UE4 fix)

* DrawTexture support

* Fix BGRA on OpenGL backend

* Fix rebase build break

* Support format aliasing on SetImage

* Fix uniform buffers being lost when bindings are out of order

* Fix storage buffers being lost when bindings are out of order

(also avoid allocations when changing bindings)

* Use current command buffer for unscaled copy (perf)

Avoids flushing commands and renting a command buffer when fulfilling copy dependencies and when games do unscaled copies.

* Update to .net6

* Update Silk.NET to version 2.10.1

Somehow, massive performance boost. Seems like their vtable for looking up vulkan methods was really slow before.

* Fix PrimitivesGenerated query, disable Transform Feedback queries for now

Lets Splatoon 2 work on nvidia. (mostly)

* Update counter queue to be similar to the OGL one

Fixes softlocks when games had to flush counters.

* Don't throw when ending conditional rendering for now

This should be re-enabled when conditional rendering is enabled on nvidia etc.

* Update findMSB/findLSB to match master's instruction enum

* Fix triangle overlay on SMO, Captain Toad, maybe others?

* Don't make Intel Mesa pay for Intel Windows bugs

* Fix samplers with MinFilter Linear or Nearest (fixes New Super Mario Bros U Deluxe black borders)

* Update Spv.Generator

* Add alpha test emulation on shader (but no shader specialisation yet...)

* Fix R4G4B4A4Unorm texture format permutation

* Validation layers should be enabled for any log level other than None

* Add barriers around vkCmdCopyImage

Write->Read barrier for src image (we want to wait for a write to read it)
Write->Read barrier for dst image (we want to wait for the copy to complete before use)

* Be a bit more careful with texture access flags, since it can be used for anything

* Device local mapping for all buffers

May avoid issues with drivers with NVIDIA on linux/older gpus on windows when using large buffers (?)
Also some performance things and fixes issues with opengl games loading textures weird.

* Cleanup, disable device local buffers for now.

* Add single queue support

Multiqueue seems to be a bit more responsive on NVIDIA. Should fix texture flush on intel. AMD has been forced to single queue for an experiment.

* Fix some validation errors around extended dynamic state

* Remove Intel bug workaround, it was fixed on the latest driver

* Use circular queue for checking consumption on command buffers

Speeds up games that spam command buffers a little. Avoids checking multiple command buffers if multiple are active at once.

* Use SupportBufferUpdater, add single layer flush

* Fix counter queue leak when game decides to use host conditional rendering

* Force device local storage for textures (fixes linux performance)

* Port #3019

* Insert barriers around vkCmdBlitImage (may fix some amd flicker)

* Fix transform feedback on Intel, gl_Position feedback and clears to inexistent depth buffers

* Don't pause transform feedback for multi draw

* Fix draw outside of render pass and missing capability

* Workaround for wrong last attribute on AMD (affects FFVII, STRIKERS1945, probably more)

* Better workaround for AMD vertex buffer size alignment issue

* More instructions + fixes on SPIR-V backend

* Allow custom aspect ratio on Vulkan

* Correct GTK UI status bar positions

* SPIR-V: Functions must always end with a return

* SPIR-V: Fix ImageQuerySizeLod

* SPIR-V: Set DepthReplacing execution mode when FragDepth is modified

* SPIR-V: Implement LoopContinue IR instruction

* SPIR-V: Geometry shader support

* SPIR-V: Use correct binding number on storage buffers array

* Reduce allocations for Spir-v serialization

Passes BinaryWriter instead of the stream to Write and WriteOperand

- Removes creation of BinaryWriter for each instruction
- Removes allocations for literal string

* Some optimizations to Spv.Generator

- Dictionary for lookups of type declarations, constants, extinst
- LiteralInteger internal data format -> ushort
- Deterministic HashCode implementation to avoid spirv result not being the same between runs
- Inline operand list instead of List<T>, falls back to array if many operands. (large performance boost)

TODO: improve instruction allocation, structured program creator, ssa?

* Pool Spv.Generator resources, cache delegates, spv opts

- Pools for Instructions and LiteralIntegers. Can be passed in when creating the generator module.
  - NewInstruction is called instead of new Instruction()
  - Ryujinx SpirvGenerator passes in some pools that are static. The idea is for these to be shared between threads eventually.
- Estimate code size when creating the output MemoryStream
- LiteralInteger pools using ThreadStatic pools that are initialized before and after creation... not sure of a better way since the way these are created is via implicit cast.

Also, cache delegates for Spv.Generator for functions that are passed around to GenerateBinary etc, since passing the function raw creates a delegate on each call.

TODO: update python spv cs generator to make the coregrammar with NewInstruction and the `params` overloads.

* LocalDefMap for Ssa Rewriter

Rather than allocating a large array of all registers for each block in the shader, allocate one array of all registers and clear it between blocks. Reduces allocations in the shader translator.

* SPIR-V: Transform feedback support

* SPIR-V: Fragment shader interlock support (and image coherency)

* SPIR-V: Add early fragment tests support

* SPIR-V: Implement SwizzleAdd, add missing Triangles ExecutionMode for geometry shaders, remove SamplerType field from TextureMeta

* Don't pass depth clip state right now (fix decals)

Explicitly disabling it is incorrect. OpenGL currently automatically disables based on depth clamp, which is the behaviour if this state is omitted.

* Multisampling support

* Multisampling: Use resolve if src samples count > dst samples count

* Multisampling: We can only resolve for unscaled copies

* SPIR-V: Only add FSI exec mode if used.

* SPIR-V: Use ConstantComposite for Texture Offset Vector

Fixes a bunch of freezes with SPIR-V on AMD hardware, and validation errors. Note: Obviously assumes input offsets are constant, which they currently are.

* SPIR-V: Don't OpReturn if we already OpExit'ed

Fixes spir-v parse failure and stack smashing in RADV (obviously you still need bolist)

* SPIR-V: Only use input attribute type for input attributes

Output vertex attributes should always be of type float.

* Multithreaded Pipeline Compilation

* Address some feedback

* Make this 32

* Update topology with GpuAccessorState

* Cleanup for merge (note: disables spir-v)

* Make more robust to shader compilation failure

- Don't freeze when GLSL compilation fails
- Background SPIR-V pipeline compile failure results in skipped draws, similar to GLSL compilation failure.

* Fix Multisampling

* Only update fragment scale count if a vertex texture needs a scale.

Fixes a performance regression introduced by texture scaling in the vertex stage where support buffer updates would be very frequent, even at 1x, if any textures were used on the vertex stage.

This check doesn't exactly look cheap (a flag in the shader stage would probably be preferred), but it is much cheaper than uploading scales in both vulkan and opengl, so it will do for now.

* Use a bitmap to do granular tracking for buffer uploads.

This path is only taken if the much faster check of "is the buffer rented at all" is triggered, so it doesn't actually end up costing too much, and the time saved by not ending render passes (and on gpu for not waiting on barriers) is probably helpful.

Avoids ending render passes to update buffer data (not all the time)
- 140-180 to 35-45 in SMO metro kingdom (these updates are in the UI)
- Very variable 60-150(!) to 16-25 in mario kart 8 (these updates are in the UI)

As well as allowing more data to be preloaded persistently, this will also allow more data to be loaded in the preload buffer, which should be faster as it doesn't need to insert barriers between draws. (and on tbdr, does not need to flush and reload tile memory)

Improves performance in GPU limited scenarios. Should notably improve performance on TBDR gpus. Still a lot more to do here.

* Copy query results after RP ends, rather than ending to copy

We need to end the render pass to get the data (submit command buffer) anyways...

Reduces render passes created in games that use queries.

* Rework Query stuff a bit to avoid render pass end

Tries to reset returned queries in background when possible, rather than ending the render pass.

Still ends render pass when resetting a counter after draws, but maybe that can be solved too. (by just pulling an empty object off the pool?)

* Remove unnecessary lines

Was for testing

* Fix validation error for query reset

Need to think of a better way to do this.

* SPIR-V: Fix SwizzleAdd and some validation errors

* SPIR-V: Implement attribute indexing and StoreAttribute

* SPIR-V: Fix TextureSize for MS and Buffer sampler types

* Fix relaunch issues

* SPIR-V: Implement LogicalExclusiveOr

* SPIR-V: Constant buffer indexing support

* Ignore unsupported attributes rather than throwing (matches current GLSL behaviour)

* SPIR-V: Implement tessellation support

* SPIR-V: Geometry shader passthrough support

* SPIR-V: Implement StoreShader8/16 and StoreStorage8/16

* SPIR-V: Resolution scale support and fix TextureSample multisample with LOD bug

* SPIR-V: Fix field index for scale count

* SPIR-V: Fix another case of wrong field index

* SPIRV/GLSL: More scaling related fixes

* SPIR-V: Fix ImageLoad CompositeExtract component type

* SPIR-V: Workaround for Intel FrontFacing bug

* Enable SPIR-V backend by default

* Allow null samplers (samplers are not required when only using texelFetch to access the texture)

* Fix some validation errors related to texel block view usage flag and invalid image barrier base level

* Use explicit subgroup size if we can (might fix some block flickering on AMD)

* Take componentMask and scissor into account when clearing framebuffer attachments

* Add missing barriers around CmdFillBuffer (fixes Monster Hunter Rise flickering on NVIDIA)

* Use ClampToEdge for Clamp sampler address mode on Vulkan (fixes Hollow Knight)

Clamp is unsupported on Vulkan, but ClampToEdge behaves almost the same. ClampToBorder on the other hand (which was being used before) is pretty different

* Shader specialization for new Vulkan required state (fixes remaining alpha test issues, vertex stretching on AMD on Crash Bandicoot, etc)

* Check if the subgroup size is supported before passing a explicit size

* Only enable ShaderFloat64 if the GPU supports it

* We don't need to recompile shaders if alpha test state changed but alpha test is disabled

* Enable shader cache on Vulkan and implement MultiplyHighS32/U32 on SPIR-V (missed those before)

* Fix pipeline state saving before it is updated.

This should fix a few warnings and potential stutters due to bad pipeline states being saved in the cache. You may need to clear your guest cache.

* Allow null samplers on OpenGL backend

* _unit0Sampler should be set only for binding 0

* Remove unused PipelineConverter format variable (was causing IOR)

* Raise textures limit to 64 on Vulkan

* No need to pack the shader binaries if shader cache is disabled

* Fix backbuffer not being cleared and scissor not being re-enabled on OpenGL

* Do not clear unbound framebuffer color attachments

* Geometry shader passthrough emulation

* Consolidate UpdateDepthMode and GetDepthMode implementation

* Fix A1B5G5R5 texture format and support R4G4 on Vulkan

* Add barrier before use of some modified images

* Report 32 bit query result on AMD windows (smo issue)

* Add texture recompression support (disabled for now)

It recompresses ASTC textures into BC7, which might reduce VRAM usage significantly on games that uses ASTC textures

* Do not report R4G4 format as supported on Vulkan

It was causing mario head to become white on Super Mario 64 (???)

* Improvements to -1 to 1 depth mode.

- Transformation is only applied on the last stage in the vertex pipeline.
- Should fix some issues with geometry and tessellation (hopefully)
- Reading back FragCoord Z on fragment will transform back to -1 to 1.

* Geometry Shader index count from ThreadsPerInputPrimitive

Generally fixes SPIR-V emitting too many triangles, may change games in OpenGL

* Remove gl_FragDepth scaling

This is always 0-1; the other two issues were causing the problems. Fixes regression with Xenoblade.

* Add Gl StencilOp enum values to Vulkan

* Update guest cache to v1.1 (due to specialization state changes)

This will explode your shader cache from earlier vulkan build, but it must be done. 😔

* Vulkan/SPIR-V support for viewport inverse

* Fix typo

* Don't create query pools for unsupported query types

* Return of the Vector Indexing Bug

One day, everyone will get this right.

* Check for transform feedback query support

Sometimes transform feedback is supported without the query type.

* Fix gl_FragCoord.z transformation

FragCoord.z is always in 0-1, even when the real depth range is -1 to 1. Turns out the only bug was geo and tess stage outputs.

Fixes Pokemon Sword/Shield, possibly others.

* Fix Avalonia Rebase

Vulkan is currently not available on Avalonia, but the build does work and you can use opengl.

* Fix headless build

* Add support for BC6 and BC7 decompression, decompress all BC formats if they are not supported by the host

* Fix BCn 4/5 conversion, GetTextureTarget

BCn 4/5 could generate invalid data when a line's size in bytes was not divisible by 4, which both backends expect.

GetTextureTarget was not creating a view with the replacement format.

* Fix dependency

* Fix inverse viewport transform vector type on SPIR-V

* Do not require null descriptors support

* If MultiViewport is not supported, do not try to set more than one viewport/scissor

* Bounds check on bitmap add.

* Flush queries on attachment change rather than program change

Occlusion queries are usually used in a depth only pass so the attachments changing is a better indication of the query block ending.

Write mask changes are also considered since some games do depth only pass by setting 0 write mask on all the colour targets.

* Add support for avalonia (#6)

* add avalonia support

* only lock around skia flush

* addressed review

* cleanup

* add fallback size if avalonia attempts to render but the window size is 0. read desktop scale after enabling dpi check

* fix getting window handle on linux. skip render is size is 0

* Combine non-buffer with buffer image descriptor sets

* Support multisample texture copy with automatic resolve on Vulkan

* Remove old CompileShader methods from the Vulkan backend

* Add minimal pipeline layouts that only contains used bindings

They are used by helper shaders, the intention is avoiding needing to recompile the shaders (from GLSL to SPIR-V) if the bindings changes on the translated guest shaders

* Pre-compile helper shader as SPIR-V, and some fixes

* Remove pre-compiled shaderc binary for Windows as its no longer needed by default

* Workaround RADV crash

Enabling the descriptor indexing extension, even if it is not used, forces the radv driver to use "bolist".

* Use RobustBufferAccess on NVIDIA gpus

Avoids the SMO waterfall triangle on older NVIDIA gpus.

* Implement GPU selector and expose texture recompression on the UI and config

* Fix and enable background compute shader compilation

Also disables warnings from shader cache pipeline misses.

* Fix error due to missing subpass dependency when Attachment Write -> Shader Read barriers are added

* If S8D24 is not supported, use D32FS8

* Ensure all fences are destroyed on dispose

* Pre-allocate arrays up front on DescriptorSetUpdater, allows the removal of some checks

* Add missing clear layer parameter after rebase

* Use selected gpu from config for avalonia (#7)

* use configured device

* address review

* Fix D32S8 copy workaround (AMD)

Fixes water in Pokemon Legends Arceus on AMD GPUs. Possibly fixes other things.

* Use push descriptors for uniform buffer updates (disabled for now)

* Push descriptor support check, buffer redundancy checks

Should make push descriptors faster, needs more testing though.

* Increase light command buffer pool to 2 command buffers, throw rather than returning invalid cbs

* Adjust bindings array sizes

* Force submit command buffers if memory in use by its resources is high

* Add workaround for AMD GCN cubemap view sins

`ImageCreateCubeCompatibleBit` seems to generally break 2D array textures with mipmaps... even if they are eventually aliased as a cubemap with mipmaps. Forcing a copy here works around the issue.

This could be used in future if enabling this bit reduces performance on certain GPUs. (mobile class is generally a worry)

Currently also enabled on Linux as I don't know if they managed to dodge this bug (someone please tell me). Not enabled on Vega at the moment, but easy to add if the issue is there.

* Add mobile, non-RX variants to the GCN regex.

Also make sure that the 3 digit ones only include numbers starting with 7 or 8.

* Increase image limit per stage from 8 to 16

Xenoblade Chronicles 2 was hiting the limit of 8

* Minor code cleanup

* Fix NRE caused by SupportBufferUpdater calling pipeline ClearBuffer

* Add gpu selector to Avalonia (#8)

* Add gpu selector to avalonia settings

* show backend label on window

* some fixes

* address review

* Minor changes to the Avalonia UI

* Update graphics window UI and locales. (#9)

* Update xaml and update locales

* locale updates

Did my best here but likely needs to be checked by native speakers, especially the use of ampersands in greek, russian and turkish?

* Fix locales with more (?) correct translations.

* add separator to render widget

* fix spanish and portuguese

* Add new IdList, replaces buffer list that could not remove elements and had unbounded growth

* Don't crash the settings window if Vulkan is not supported

* Fix Actions menu not being clickable on GTK UI after relaunch

* Rename VulkanGraphicsDevice to VulkanRenderer and Renderer to OpenGLRenderer

* Fix IdList and make it not thread safe

* Revert useless OpenGL format table changes

* Fix headless project build

* List throws ArgumentOutOfRangeException

* SPIR-V: Fix tessellation

* Increase shader cache version due to tessellation fix

* Reduce number of Sync objects created (improves perf in some specific titles)

* Fix vulkan validation errors for NPOT compressed upload and GCN workaround.

* Add timestamp to the shader cache and force rebuild if host cache is outdated

* Prefer Mail box present mode for popups (#11)

* Prefer Mail box present mode

* fix debug

* switch present mode when vsync is toggled

* only disable vsync on the main window

* SPIR-V: Fix geometry shader input load with transform feedback

* BC7 Encoder: Prefer more precision on alpha rather than RGB when alpha is 0

* Fix Avalonia build

* Address initial PR feedback

* Only set transform feedback outputs on last vertex stage

* Address riperiperi PR feedback

* Remove outdated comment

* Remove unused constructor

* Only throw for negative results

* Throw for QueueSubmit and other errors

No point in delaying the inevitable

* Transform feedback decorations inside gl_PerVertex struct breaks the NVIDIA compiler

* Fix some resolution scale issues

* No need for two UpdateScale calls

* Fix comments on SPIR-V generator project

* Try to fix shader local memory size

On DOOM, a shader is using local memory, but both Low and High size are 0, CRS size is 1536, it seems to store on that region?

* Remove RectangleF that is now unused

* Fix ImageGather with multiple offsets

Needs ImageGatherExtended capability, and must use `ConstantComposite` instead of `CompositeConstruct`

* Address PR feedback from jD in all projects except Avalonia

* Address most of jD PR feedback on Avalonia

* Remove unsafe

* Fix VulkanSkiaGpu

* move present mode request out of Create Swapchain method

* split more parts of create swapchain

* addressed reviews

* addressed review

* Address second batch of jD PR feedback

* Fix buffer <-> image copy row length and height alignment

AlignUp helper does not support NPOT alignment, and ASTC textures can have NPOT block sizes

* Better fix for NPOT alignment issue

* Use switch expressions on Vulkan EnumConversion

Thanks jD

* Fix Avalonia build

* Add Vulkan selection prompt on startup

* Grammar fixes on Vulkan prompt message

* Add missing Vulkan migration flag

Co-authored-by: riperiperi <rhy3756547@hotmail.com>
Co-authored-by: Emmanuel Hansen <emmausssss@gmail.com>
Co-authored-by: MutantAura <44103205+MutantAura@users.noreply.github.com>
2022-07-31 18:26:06 -03:00
gdkchan 37b6e081da
Fix DMA linear texture copy fast path (#3496)
* Fix DMA linear texture copy fast path

* Formatting
2022-07-28 13:46:12 -03:00
Logan Stromberg 6eb85e846f
Reduce some unnecessary allocations in DMA handler (#2886)
* experimental changes to try and reduce allocations in kernel threading and DMA handler

* Simplify the changes in this branch to just 1. Don't make unnecessary copies of data just for texture-texture transfers and 2. Add a fast path for 1bpp linear byte copies

* forgot to check src + dst linearity in 1bpp DMA fast path. Fixes the UE4 regression.

* removing dev log I left in

* Generalizing the DMA linear fast path to cases other than 1bpp copies

* revert kernel changes

* revert whitespace

* remove unneeded references

* PR feedback

Co-authored-by: Logan Stromberg <lostromb@microsoft.com>
Co-authored-by: gdk <gab.dark.100@gmail.com>
2022-07-14 15:45:56 -03:00
gdkchan b46b63e06a
Add support for alpha to coverage dithering (#3069)
* Add support for alpha to coverage dithering

* Shader cache version bump

* Fix wrong alpha register

* Ensure support buffer is cleared

* New shader specialization based approach
2022-07-05 19:58:36 -03:00
riperiperi 99ffc061d3
Optimize Texture Binding and Shader Specialization Checks (#3399)
* Changes 1

* Changes 2

* Better ModifiedSequence handling

This should handle PreciseEvents properly, and simplifies a few things.

* Minor changes, remove debug log

* Handle stage.Info being null

Hopefully fixes Catherine crash

* Fix shader specialization fast texture lookup

* Fix some things.

* Address Feedback Part 1

* Make method static.
2022-06-17 13:09:14 -03:00
gdkchan 851f56b08a
Support Array/3D depth-stencil render target, and single layer clears (#3400)
* Support Array/3D depth-stencil render target, and single layer clears

* Alignment
2022-06-14 13:30:39 -03:00
gdkchan 9a9349f0f4
Fix instanced indexed inline draw index count (#3389) 2022-06-10 23:44:49 -03:00
gdkchan 46cc7b55f0
Fix instanced indexed inline draws (#3383) 2022-06-05 21:24:28 -03:00
Billy Laws d03124a992
Fix 3D semaphore counter type 0 handling (#3380)
Counter type 0 actually releases the semaphore payload rather than a constant zero as was previously thought. This is required by Skyrim.
2022-06-02 19:51:36 -03:00
riperiperi 43b4b34376
Implement Viewport Transform Disable (#3328)
* Initial implementation (no specialization)

* Use specialization

* Fix render scale, increase code gen version

* Revert accidental change

* Address Feedback
2022-05-12 10:47:13 -03:00
gdkchan 9eb5b7a10d
Restrict cases where vertex buffer size from index buffer type is used (#3304) 2022-05-01 11:12:34 -03:00
gdkchan 43ebd7a9bb
New shader cache implementation (#3194)
* New shader cache implementation

* Remove some debug code

* Take transform feedback varying count into account

* Create shader cache directory if it does not exist + fragment output map related fixes

* Remove debug code

* Only check texture descriptors if the constant buffer is bound

* Also check CPU VA on GetSpanMapped

* Remove more unused code and move cache related code

* XML docs + remove more unused methods

* Better codegen for TransformFeedbackDescriptor.AsSpan

* Support migration from old cache format, remove more unused code

Shader cache rebuild now also rewrites the shared toc and data files

* Fix migration error with BRX shaders

* Add a limit to the async translation queue

 Avoid async translation threads not being able to keep up and the queue growing very large

* Re-create specialization state on recompile

This might be required if a new version of the shader translator requires more or less state, or if there is a bug related to the GPU state access

* Make shader cache more error resilient

* Add some missing XML docs and move GpuAccessor docs to the interface/use inheritdoc

* Address early PR feedback

* Fix rebase

* Remove IRenderer.CompileShader and IShader interface, replace with new ShaderSource struct passed to CreateProgram directly

* Handle some missing exceptions

* Make shader cache purge delete both old and new shader caches

* Register textures on new specialization state

* Translate and compile shaders in forward order (eliminates diffs due to different binding numbers)

* Limit in-flight shader compilation to the maximum number of compilation threads

* Replace ParallelDiskCacheLoader state changed event with a callback function

* Better handling for invalid constant buffer 1 data length

* Do not create the old cache directory structure if the old cache does not exist

* Constant buffer use should be per-stage. This change will invalidate existing new caches (file format version was incremented)

* Replace rectangle texture with just coordinate normalization

* Skip incompatible shaders that are missing texture information, instead of crashing

This is required if we, for example, support new texture instruction to the shader translator, and then they allow access to textures that were not accessed before. In this scenario, the old cache entry is no longer usable

* Fix coordinates normalization on cubemap textures

* Check if title ID is null before combining shader cache path

* More robust constant buffer address validation on spec state

* More robust constant buffer address validation on spec state (2)

* Regenerate shader cache with one stream, rather than one per shader.

* Only create shader cache directory during initialization

* Logging improvements

* Proper shader program disposal

* PR feedback, and add a comment on serialized structs

* XML docs for RegisterTexture

Co-authored-by: riperiperi <rhy3756547@hotmail.com>
2022-04-10 10:49:44 -03:00
gdkchan 952f6f8a65
Calculate vertex buffer size from index buffer type (#3253)
* Calculate vertex buffer size from index buffer type

* We also need to update the size if first vertex changes
2022-04-08 11:02:06 +02:00
gdkchan d4b960d348
Implement primitive restart draw arrays properly on OpenGL (#3256) 2022-04-04 18:43:24 -03:00
gdkchan b2a225558d
Do not force scissor on clear if scissor is disabled (#3258) 2022-04-04 18:30:43 -03:00
gdkchan 79408b68c3
De-tile GOB when DMA copying from block linear to pitch kind memory regions (#3207)
* De-tile GOB when DMA copying from block linear to pitch kind memory regions

* XML docs + nits

* Remove using

* No flush for regular buffer copies

* Add back ulong casts, fix regression due to oversight
2022-03-20 13:55:07 -03:00
gdkchan e5ad1dfa48
Implement S8D24 texture format and tweak depth range detection (#2458) 2022-03-15 03:42:08 +01:00
riperiperi c9c65af59e
Perform unscaled 2d engine copy on CPU if source texture isn't in cache. (#3112)
* Initial implementation of fast 2d copy

TODO: Partial copy for mismatching region/size.

* WIP

* Cleanup

* Update Ryujinx.Graphics.Gpu/Engine/Twod/TwodClass.cs

Co-authored-by: gdkchan <gab.dark.100@gmail.com>

Co-authored-by: gdkchan <gab.dark.100@gmail.com>
2022-02-22 11:21:29 -03:00
gdkchan 7bfb5f79b8
When copying linear textures, DMA should ignore region X/Y (#3121) 2022-02-16 11:13:45 +01:00
Berkan Diler 8f35345729
Use Enum and Delegate.CreateDelegate generic overloads (#3111)
* Use Enum generic overloads

* Remove EnumExtensions.cs

* Use Delegate.CreateDelegate generic overloads
2022-02-13 10:50:07 -03:00
gdkchan b944941733
Fix bug that could cause depth buffer to be missing after clear (#3067) 2022-01-31 00:11:43 -03:00
riperiperi c52158b733
Add timestamp to 16-byte/4-word semaphore releases. (#3049)
* Add timestamp to 16-byte semaphore releases.

BOTW was reading a ulong 8 bytes after a semaphore return. Turns out this is the timestamp it was trying to do performance calculation with, so I've made it write when necessary.

This mode was also added to the DMA semaphore I added recently, as it is required by a few games. (i think quake?)

The timestamp code has been moved to GPU context. Check other games with an unusually low framerate cap or dynamic resolution to see if they have improved.

* Cast dma semaphore payload to ulong to fill the space

* Write timestamp first

Might be just worrying too much, but we don't want the applcation reading timestamp if it sees the payload before timestamp is written.
2022-01-27 22:50:32 +01:00
gdkchan fb853f13e9
Scale scissor used for clears (#3002) 2022-01-16 20:23:00 -03:00
gdkchan 6e0799580f
Fix render target clear when sizes mismatch (#2994) 2022-01-11 20:15:17 +01:00
riperiperi cda659955c
Texture Sync, incompatible overlap handling, data flush improvements. (#2971)
* Initial test for texture sync

* WIP new texture flushing setup

* Improve rules for incompatible overlaps

Fixes a lot of issues with Unreal Engine games. Still a few minor issues (some caused by dma fast path?) Needs docs and cleanup.

* Cleanup, improvements

Improve rules for fast DMA

* Small tweak to group together flushes of overlapping handles.

* Fixes, flush overlapping texture data for ASTC and BC4/5 compressed textures.

Fixes the new Life is Strange game.

* Flush overlaps before init data, fix 3d texture size/overlap stuff

* Fix 3D Textures, faster single layer flush

Note: nosy people can no longer merge this with Vulkan. (unless they are nosy enough to implement the new backend methods)

* Remove unused method

* Minor cleanup

* More cleanup

* Use the More Fun and Hopefully No Driver Bugs method for getting compressed tex too

This one's for metro

* Address feedback, ASTC+ETC to FormatClass

* Change offset to use Span slice rather than IntPtr Add

* Fix this too
2022-01-09 13:28:48 -03:00
gdkchan ef39b2ebdd
Flip scissor box when the YNegate bit is set (#2941)
* Flip scissor box when the YNegate bit is set

* Flip scissor based on screen scissor state, account for negative scissor Y

* No need for abs when we already know the value is negative
2021-12-28 08:37:23 -03:00
gdkchan a87f7f2029
Fix DMA copy fast path line size when xCount < stride (#2942) 2021-12-26 13:05:26 -03:00
gdkchan 451673ada5
Fix I2M texture copies when line length is not a multiple of 4 (#2938)
* Fix I2M texture copies when line length is not a multiple of 4

* Do not copy padding bytes for 1D copies

* Nit
2021-12-26 12:39:07 -03:00
gdkchan e7c2dc8ec3
Fix for texture pool not being updated when it should + buffer texture related fixes (#2911) 2021-12-19 11:50:44 -03:00
riperiperi 521a07e612
Add support for releasing a semaphore to DmaClass (#2926)
* Add support for releasing a semaphore to DmaClass

Fixes freezes in OpenGL games, primarily GameMaker ones such as Undertale.

* Address Feedback
2021-12-19 11:32:52 -03:00
gdkchan 30b7aaefca
Better depth range detection (#2754)
* Better depth range detection

* PR feedback

* Move depth mode set out of the loop and to a separate method
2021-11-21 10:25:03 -03:00
riperiperi 788aec511f
Limit Custom Anisotropic Filtering to mipmapped textures with many levels (#2832)
* Limit Custom Anisotropic Filtering to only fully mipmapped textures

There's a major flaw with the anisotropic filtering setting that causes @GamerzHell9137 to report graphical bugs that otherwise wouldn't be there, because he just won't set it to Auto. This should fix those issues, hopefully.

These bugs are generally because anisotropic filtering is enabled on something that it shouldn't be, such as a post process filter or some data texture. This PR maintains two host samplers when custom AF is enabled, and only uses the forced AF one when the texture is 2d and fully mipmapped (goes down to 1x1). This is because game textures are the ideal target for this filtering, and they are typically fully mipmapped, unlike things like screen render targets which usually have 1 or just a few levels.

This also only enables AF on mipmapped samplers where the filtering is bilinear or trilinear. This should be self explanatory.

This PR also allows the changing of Anisotropic Filtering at runtime, and you can immediately see the changes. All samplers are flushed from the cache if the setting changes, causing them to be recreated with the new custom AF value. This brings it in line with our resolution scale. 😌

* Expected minimum mip count for large textures rather than all, address feedback

* Use Target rather than Info.Target

* Retrigger build?

* Fix rebase
2021-11-13 16:04:21 -03:00
gdkchan 611bec6e44
Implement DrawTexture functionality (#2747)
* Implement DrawTexture functionality

* Non-NVIDIA support

* Disable some features that should not affect draw texture (slow path)

* Remove space from shader source

* Match 2D engine names

* Fix resolution scale and add missing XML docs

* Disable transform feedback for draw texture fallback
2021-11-10 15:37:49 -03:00
gdkchan d512ce122c
Initial tessellation shader support (#2534)
* Initial tessellation shader support

* Nits

* Re-arrange built-in table

* This is not needed anymore

* PR feedback
2021-10-18 18:38:04 -03:00
gdkchan 464a92d8a7
Force index buffer update for games using Vulkan (#2726) 2021-10-12 23:46:42 +02:00
riperiperi 0bce4a074a
Don't force scaling on 2D copy sources (#2701)
Some games (GameMaker Studio) build texture atlases out of sprites during initialization, using the 2D copy method. These copies are done from textures loaded into memory, not rendered, so they are not scaled to begin with.

I had set srcTexture in these copies to force scaling, but really it only needs to scale if the texture already exists and was scaled by rendering or something else. I just set that to false, so it doesn't change if the texture is scaled or not. This will also avoid the destination being scaled if the source wasn't. The copy can handle mismatching scales just fine.

This prevents scaling artifacts in GMS games, and maybe others (not Super Mario Maker 2, that has another issue).
2021-10-12 23:12:17 +02:00
riperiperi d92fff541b
Replace CacheResourceWrite with more general "precise" write (#2684)
* Replace CacheResourceWrite with more general "precise" write

The goal of CacheResourceWrite was to notify GPU resources when they were modified directly, by looking up the modified address/size in a structure and calling a method on each resource. The downside of this is that each resource cache has to be queried individually, they all have to implement their own way to do this, and it can only signal to resources using the same PhysicalMemory instance.

This PR adds the ability to signal a write as "precise" on the tracking, which signals a special handler (if present) which can be used to avoid unnecessary flush actions, or maybe even more. For buffers, precise writes specifically do not flush, and instead punch a hole in the modified range list to indicate that the data on GPU has been replaced.

The downside is that precise actions must ignore the page protection bits and always signal - as they need to notify the target resource to ignore the sequence number optimization.

I had to reintroduce the sequence number increment after I2M, as removing it was causing issues in rabbids kingdom battle. However - all resources modified by I2M are notified directly to lower their sequence number, so the problem is likely that another unrelated resource is not being properly updated. Thankfully, doing this does not affect performance in the games I tested.

This should fix regressions from #2624. Test any games that were broken by that. (RF4, rabbids kingdom battle)

I've also added a sequence number increment to ThreedClass.IncrementSyncpoint, as it seems to fix buffer corruption in OpenGL homebrew. (this was a regression from removing sequence number increment from constant buffer update - another unrelated resource thing)

* Add tests.

* Add XML docs for GpuRegionHandle

* Skip UpdateProtection if only precise actions were called

This allows precise actions to skip reprotection costs.
2021-09-29 02:27:03 +02:00