SDLThread is a Java Thread, it's not needed to call 'Detach' from the JVM.
Clear mThreadKey, so that the pthread_create destructor is not called for this
thread.
SDLActivity thread priority is unchanged, by default -10 (THREAD_PRIORITY_VIDEO).
SDLAudio thread priority was -4 (SDL_SetThreadPriority was ignored) and is now -16 (THREAD_PRIORITY_AUDIO).
SDLThread thread priority was 0 (THREAD_PRIORITY_DEFAULT) and is -4 (THREAD_PRIORITY_DISPLAY).
- destroy Android_ActivityMutex
- display any SDL error message that may have occured in this thread,
since SDL_GetError() is thread specific, and user has no access to it.
In the usual case, first call to onNativeOrientationChanged() is done before
SDL has been initialised and would just set an error message
"Video subsystem has not been initialized" without sending the event.
Make sure there is not pending Pause accumulated, so the the application doesn't
remain paused and stucked in onDestroy().
Can be tested by adding:
SDLActivity.nativePause();
SDLActivity.nativePause();
mSingleton.finish();
Doesn't seem to happen manually, but symetrical to the pause handling.
Can be tested by adding:
mNextNativeState = SDLActivity.NativeState.PAUSED;
handleNativeState();
mNextNativeState = SDLActivity.NativeState.RESUMED;
handleNativeState();
mNextNativeState = SDLActivity.NativeState.PAUSED;
handleNativeState();
mNextNativeState = SDLActivity.NativeState.RESUMED;
handleNativeState();
Before, it ends in 'paused' state.
Now, it ends in 'resumed' state.
It may happen to have the sequence pause()/resume()/pause(), before polling
any events.
Before, it ends in 'resumed' state because as the check is greedy.
Now, always increase the Pause semaphore, and stop at each pause.
It ends in 'paused' state.
Related to bug 3250: set up a reconfiguration of SurfaceView holder.
Turn the screen off manually before the app starts
(repro rate is not 100%..)
Use a semaphore to prevent concurrency issues between Java Activity and Native thread code, when using 'Android_Window'.
(Eg. Java sending Touch events, while native code is destroying the main SDL_Window. )
Touch device types include SDL_TOUCH_DEVICE_DIRECT (a touch screen with window-relative coordinates for touches), SDL_TOUCH_DEVICE_INDIRECT_ABSOLUTE (a trackpad-style device with absolute device coordinates), and SDL_TOUCH_DEVICE_INDIRECT_RELATIVE (a trackpad-style device with screen cursor-relative coordinates).
Phone screens are an example of a direct device type. Mac trackpads are the indirect-absolute touch device type. The Apple TV remote is an indirect-relative touch device type.
Sylvain
SDL_android.c
src/core/android/SDL_android.c:1302:5: warning: variable 'br' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
src/core/android/SDL_android.c:1306:12: note: uninitialized use occurs here
return br;
^~
src/core/android/SDL_android.c:1270:12: note: initialize the variable 'br' to silence this warning
jint br;
^
Maybe we could add some basics warning flags, not to see all warnings, but so that new warnings are caught sooner.
I would go for -Wall -Wextra, and some -Wno-warning for the allowed warnings.
Rainer Sabelka
When using SLD2 on a Linux console with the KMS/DRM video backend and Linux evdev keyboard support, the caps lock, scroll lock, and num lock leds do not work.
The attached patch adds ioctls for setting the LED state in SDL_evdev_kbd.c
Include guards in most changed files were missing, I added them keeping
the same style as other SDL files. In some cases I moved the include
guards around to be the first thing the header has to take advantage of
any possible improvements compiler may have for inclusion guards.
src/core/linux/SDL_evdev.c:104:1: warning: "_THIS" redefined
In file included from src/core/linux/../../events/SDL_events_c.h:26,
from src/core/linux/SDL_evdev.c:45:
src/core/linux/../../events/../video/SDL_sysvideo.h:146:1: warning: this is the location of the previous definition
"In release 2.0.6, when Linux evdev keyboard support has been moved to a
separate source file, a feature was added to disable normal keyboard event
processing to prevent "spilling" keystrokes to background virtual console.
This feature has one unpleasant side effect: if application fails to call
`SDL_Exit` before termination or crashes with fatal signal, console is left
in unusable state with keyboard not working and no possibility to switch
virtual console. If user has a chance, he can login remotely and restore
keyboard with `kbd_mode`, otherwise the only option is to reboot the machine.
This patch fixes that problem by intercepting fatal signals (with `sigaction`)
and process termination (with `atexit`), to restore keyboard state, if it
wasn't properly restored with `SDL_Exit`.
The function registered with `atexit` also restores original signal handlers,
to prevent leaving invalid handlers after SDL library is unloaded, if it was
loaded dynamically with `dlopen`.
No signal handlers or `atexit` function are installed if SDL boolean hint
`SDL_HINT_NO_SIGNAL_HANDLERS` is `SDL_TRUE`.
Additionally, if environment variable `SDL_INPUT_LINUX_KEEP_KBD` exists,
keyboard initialization function completely skips disabling keyboard. This
can be useful for debugging."
Fixes Bugzilla #4193.
Parse out a copy of the varargs ourselves to get to the reply portion, since
the original passed to D-Bus might modify or not modify the caller's copy,
depending on system ABI.
Sylvain
Patch a few warnings when using:
-Wmissing-prototypes -Wdocumentation -Wdocumentation-unknown-command
They are automatically enabled with -Wall
This was reproducible by running an SDL app on the console from an ssh login. In this case the terminal wasn't owned by the user running the app, so we were using the default keymap, which didn't have state transitions defined for ctrl and alt, so once we entered that state keypresses would no longer transition out of that state, nor would they generate text.
As a workaround, we'll just reset to the default shift state if that happens, which means we'll get text for keys pressed while ctrl is held down, but I don't think that's a big problem.
Note that in this case we also can't mute the keyboard, so the keypresses go to the console, which probably isn't what you want...
Expand SDLActivity::SDLSurface::surfaceChanged() callback to grab the panel width and height at the same time and pass that along to the native code. Only works on API 17+. Duplicates surface dimensions whenever it fails.
Add Android_DeviceWidth/Android_DeviceHeight globals to native code.
Disambiguate Android_ScreenWidth/Android_ScreenHeight -> Android_SurfaceWidth/Android_SurfaceHeight
Use device width/height for all display mode settings.
This is commented out in SDLActivity.java, with the note #CURSORIMPLEENTATION because it requires API 24, which is higher than the minimum required SDK
Ozkan Sezer
The following patch defines _WIN32_WINNT_WIN7 if it is not already
defined in core/windows/SDL_windows.c, similar to what is already
there for _WIN32_WINNT_VISTA.
cjacker
After updating from 2.0.5 to 2.0.7, Ibus not work anymore(fcitx still works).
Compare with 2.0.5, there are two issues in SDL_ibus.c.
1, SetupConnection always return SDL_FALSE in 2.0.7.
2, 'SetCapabilities' method should be called on 'ibus_conn'.
Patch attached.
Alexander Larsson
dbus_shutdown() is a debug feature which closes all global resources in the dbus library. Calling this should be done by the app, not a library, because if there are multiple users of dbus in the process then SDL could shut it down even though another part is using it.
For example, i had an issue with this in mGBA, which uses both Qt and SDL, both using libdbus. I had a session bus, but no system bus (this was in a flatpak sandbox), and when SDL_DBus_Init() failed to init the system bus it called dbus_shudown() and continued on. This caused issues for Qt when running due to its session bus connections having disappeared beneath it.
SDL now builds with gcc 7.2 with the following command line options:
-Wall -pedantic-errors -Wno-deprecated-declarations -Wno-overlength-strings --std=c99
tomwardio
HAVE_POLL is correctly defined in SDL_config.h when running configure. However, in the only place where it's used, it's undefined at the start of the file.
Aaron
As of 2.0.6, all of my games are failing with the following error:
process 31778: arguments to dbus_type_is_basic() were incorrect, assertion "dbus_type_is_valid (typecode) || typecode == DBUS_TYPE_INVALID" failed in file dbus-signature.c line 322.
This is normally a bug in some application using the D-Bus library.
D-Bus not built with -rdynamic so unable to print a backtrace
(patch by Ozkan Sezer)
David Brady
When I attempted to make a mapping file for Android gamepads, I quickly discovered that most of the ones that I have here show up as the same device (Broadcom Bluetooth HID), meaning that it was impossible to make mappings on Android, since every device looked the same.
This patch will check for the existence of the getDescriptor function added in Jelly Bean, and use it if it's there. The Android Dashboard says that the majority of Android phones should support this function, and doing it this way will not force us to bump up our API version.
Sylvain
Hi! here's a patch for that with two class loaded regarding API level.
Test both case : before API 11 and after.
I also remove now unused GetSystemServiceFromUIThread() and minor clean-up (haptic warning prototype).
manuel.montezelo
Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015
--------------------------------------------------------
Package: libsdl2-2.0-0
Version: 2.0.0+dfsg1-3
Severity: normal
Tags: patch
I have occasional crashes here caused by the X11 backend of SDL2. It seems to
be caused by the X11_Pending function trying to add a high number (> 1024)
file descriptor to a fd_set before doing a select on it to avoid busy waiting
on X11 events. This causes a buffer overflow because the file descriptor is
larger (or equal) than the limit FD_SETSIZE.
Attached is a possible workaround patch.
Please also keep in mind that fd_set are also used in following files which
may have similar problems.
src/audio/bsd/SDL_bsdaudio.c
src/audio/paudio/SDL_paudio.c
src/audio/qsa/SDL_qsa_audio.c
src/audio/sun/SDL_sunaudio.c
src/joystick/linux/SDL_sysjoystick.c
--------------------------------------------------------
On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote:
> I have occasional crashes here caused by the X11 backend of SDL2. It seems
> to be caused by the X11_Pending function trying to add a high number (>
> 1024) file descriptor to a fd_set before doing a select on it to avoid busy
> waiting on X11 events. This causes a buffer overflow because the file
> descriptor is larger (or equal) than the limit FD_SETSIZE.
I personally experienced this problem while hacking on the python bindings
package for SDL2 [1] (while doing make runtest). But it easier to reproduce in
a smaller, synthetic testcase.
Sylvain
Here's a patch.
It tries to get the hint first. Resizable will allow any orientation. Otherwise it uses width/height window.
setOrientation method is splitted in static and non-static, so that it can be overloaded in a user subclass.
Some artefact observed :
surfaceChanged() can be called twice at the beginning. When the phone starts in portrait and run a landscape application.
owen
I removed all the static variables from SDLActivity.java
Updated all the SDL_android.c jni calls as well
I added a new function to SDL_android.c/ h
void Android_JNI_SeparateEventsHint(const char* c);
This is called by SDL_androidtouch.c so that this TU doesn't need to call any JNI functions.
Ozkan Sezer
(In reply to Ryan C. Gordon from comment #9)
> I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can
> you verify this works on the latest MinGW?
>
> Thanks,
> --ryan.
This patch is wrong: the structure in question has nothing to do with any
gcc version in use. I suggest reverting this adding a conigury check for
it, instead. Something like the following should do it: (configure needs
regenerating.)
This should remain binary compatible with Windows XP, as we dynamically
load anything we need and fall back to DirectSound/WinMM/XAudio2 if not
available.
K_NORMTAB, K_SHIFTTAB, K_ALTTAB, K_ALTSHIFTTAB
In the normal case we'll load all the keymaps from the kernel, but this reduces the size of the SDL library for the fallback case when we can't get to the tty.
Rob
I've ran into an issue where I successfully receive SDL_KEY[UP,DOWN] events but not SDL_TEXTINPUT or SDL_TEXTEDITING. In my case the code in SDL_EVDEV_do_text_input() is returning early (on error) prior to calling SDL_SendKeyboardText(). I'm running on the RaspberryPi 3, without X11.
In SDL_EVDEV_do_text_input() there is a condition to check keysyms with a type value below 0xf0, then subtract 0xf0 from type. Without understanding the purpose of this code, I disabled it, recompiled, and I'm getting correct SDL_TEXTINPUT events. I'm going to guess that my hack/fix is going to be problematic in some other environment, but after some initial testing it looks like everything is running fine in my setup.
tvc
I believe this patch should fix it, instead of looping through all the tty's and seemingly selecting the wrong one and corrupting the console I've just made SDL open /dev/tty which is the console attached to the current process anyway.
Rob
When calling ioctl(fd, KDGKBTYPE, &type) in SDL_EVDEV_is_console(), we declare type as an 'int'. This should be a 'char'. The subsequent syscall, and kernel code, only writes the lower byte of the word.
See: http://lxr.free-electrons.com/source/drivers/tty/vt/vt_ioctl.c?v=4.4#L399
ucval = KB_101;
ret = put_user(ucval, (char __user *)arg);
I've observed intermittent behavior related to this, and I can force an error condition by using an int initialized to 0xFFFFFFFF. The resulting ioctl will set type to 0XFFFFFF02, and the conditional return in SDL_EVDEV_is_console() will fail.
Recommend changing to char, or masking off unused bits.
felix
Compiling even a simple SDL2 'hello world' program with gcc -Wstrict-prototypes (GCC 6.2.1) results in warnings like:
/usr/include/SDL2/SDL_gamecontroller.h:143:1: attention : function declaration isn't a prototype [-Wstrict-prototypes]
extern DECLSPEC int SDLCALL SDL_GameControllerNumMappings();
^~~~~~
It seems there is a missing 'void' between the parentheses.
Weitian Leung
Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too),
enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
