"const" that causes an error with the newer gcc.
BUG=chromium-os:14973
TEST=Built CrOS's google-breakpad
Patch by Michael Krebs <mkrebs@chromium.org>
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@878 4c0a9323-5329-0410-9bdc-e9ce6186880e
To be noted:
1) All is done in process, as multi-process is not allowed on ios.
2) Dump are saved when a crash occures but are not automatically send to the
server.
3) Breakpad.h contains function to check if a dump must be uploaded, and to
upload a dump.
4) The code is copy pasting a log of Breakpad implementation for Mac OS. It
might be possible to do some refactoring.
Review URL: http://breakpad.appspot.com/309003
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@868 4c0a9323-5329-0410-9bdc-e9ce6186880e
src/third_party/glog at r97
src/third_party/protobuf/protobuf at r407
Remove the bogus externals (not svn:externals) property from src.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@863 4c0a9323-5329-0410-9bdc-e9ce6186880e
forbidden by the style guide, and are bad practice in headers even under
style rules that tolerate this construct.
This fixes warnings such as:
In file included from dwarf2reader.cc:34:
dwarf2reader.h:53:17: warning: using namespace directive in global context in header [-Wheader-hygiene]
Review URL: http://breakpad.appspot.com/312002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@862 4c0a9323-5329-0410-9bdc-e9ce6186880e
This function already establishes that (signed) i must be positive by the time
it assigns it to (unsigned) reg. Because reg is unsigned, it is impossible for
it to be negative. Because i was already checked for positivity, this check
can be removed entirely. It was not a miswritten check that intended to check
i instead of reg, because i is already checked.
This addresses the following warning:
dwarf_cfi_to_module.cc:135:9: warning: comparison of 0 <= unsigned expression is always true [-Wtautological-compare]
Committed r859
Review URL: http://breakpad.appspot.com/310003
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@861 4c0a9323-5329-0410-9bdc-e9ce6186880e
symupload printed -[NSData length], an NSUInteger, using %lu. %lu is proper
to print a "long" as unsigned, but NSUInteger is a typedef for "unsigned int"
when building for 32-bit. This would not have caused any problems, because in
the 32-bit model, both int and long are 32 bits wide. In the 64-bit model,
long is 64 bits wide, but NSUInteger is defiend as "unsigned long", so there
wouldn't have even been a warning in that case.
This addresses the following warning:
symupload.m:137:30:{137:28-137:31}{137:46-137:59}: warning: conversion specifies type 'unsigned long' but the argument has type 'NSUInteger' (aka 'unsigned int') [-Wformat]
Review URL: http://breakpad.appspot.com/313002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@860 4c0a9323-5329-0410-9bdc-e9ce6186880e
The actual defintion comes from common/mac/GTMLogger.h, #imported above.
This removes a compilation warning that showed up in r853:
uploader.m:52:9: warning: 'GTMLoggerDebug' macro redefined
GTMLogger.h:339:9: note: previous definition is here
Review URL: http://breakpad.appspot.com/310002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@859 4c0a9323-5329-0410-9bdc-e9ce6186880e
<Breakpad/BreakpadDefines.h>.
During the build of Breakpad itself (especially in Chromium), there is no
Breakpad.framework/Headers in which to locate BreakpadDefines.h, so the
framework-style #include of <Breakpad/BreakpadDefines.h> is not able to find
anything to #include. Using the "BreakpadDefines.h" form should always locate
this file next to Breakpad.h whether it's in the framework or in the source
tree.
This fixes a Chromium build regression caused by Breakpad r856.
Review URL: http://breakpad.appspot.com/313001
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@857 4c0a9323-5329-0410-9bdc-e9ce6186880e
This will be needed for iOS implementation, where the Inspector won't be
used, but where a config file will still be needed, because the uploads
won't happen just after the crash, but on a next run.
Review URL: http://breakpad.appspot.com/309001
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@852 4c0a9323-5329-0410-9bdc-e9ce6186880e
Regression from Breakpad r842 (Chromium r103778) - browser crash reports were
uploaded, but renderer crash reports were not. Messages such as these may have
been logged:
com.apple.launchd.peruser.x[y] could not lookup DNS configuration info
service: (ipc/send) invalid destination port
com.apple.launchd.peruser.x[y] Breakpad Reporter: Send Error: Error
Domain=NSURLErrorDomain Code=-1009 UserInfo=z "This computer’s Internet
connection appears to be offline." Underlying Error=(Error
Domain=kCFErrorDomainCFNetwork Code=-1009 UserInfo=w "This computer’s Internet
connection appears to be offline.")
When OnDemandServer establishes the bootstrap subset, it will now register the
parent bootstrap port in the subset namespace so that the Inspector can
recover this port and switch to it. The Sender, launched by the Inspector,
relies on the bootstrap port being set properly.
BUG=chromium:99252
TEST=All test cases from Chromium r103778 (bug chromium:28547) plus:
about:crash should generate a crash report which should be uploaded,
provided that throttling is not in effect. Remove or edit
~/Library/Preferences/com.Breakpad.crash_report_sender.plist to defeat
throttling. Also verify that about:inducebrowsercrashforrealz works.
Review URL: http://breakpad.appspot.com/307001
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@843 4c0a9323-5329-0410-9bdc-e9ce6186880e
lifetime of the task to be monitored, the invoking task. This allows the
bootstrap server (in launchd) to automatically clean up the Mach server
registration when the task being monitored exits, avoiding leaks of
com.Breakpad.Inspector(pid) ports in "launchctl bslist".
BUG=chromium:28547
TEST=Handler should still crash catches, but inspector ports should no longer
show up in "launchctl bslist". They should show up under a subset port in
"launchctl bstree" instead. "launchctl bstree" must be invoked as root.
Review URL: http://breakpad.appspot.com/306001
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@842 4c0a9323-5329-0410-9bdc-e9ce6186880e
was already the SDK being used for x86_64 Release mode. The 10.6 SDK is not
necessary.
Explicitly set the file encoding to UTF-16 on the sender app's lproj's
InfoPlist.strings and Localizable.strings files.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@840 4c0a9323-5329-0410-9bdc-e9ce6186880e
The value of MD_CONTEXT_CPU_MASK in use assumes that only the lower 6 bits are used for flags, and the upper 26 bits are for the CPU type. However, as of Windows 7 SP1, the 7th bit is being used as a flag (per http://msdn.microsoft.com/en-us/library/hh134238%28v=vs.85%29.aspx and the Windows SDK headers). Adjusting MD_CONTEXT_CPU_MASK works, but unfortunately that masks off the existing value of MD_CONTEXT_ARM. This patch also changes the value of MD_CONTEXT_ARM and adjusts the minidump context reading machinery to gracefully handle minidumps with the old value.
R=mark at http://breakpad.appspot.com/302001
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@831 4c0a9323-5329-0410-9bdc-e9ce6186880e
effect.
BUG=none
TEST=Apple Crash Reporter logs from processes in which Breakpad handles the
crash should point the finger at the actual crash source, not the
Breakpad thread's attempt to write to unwritable memory.
Review URL: http://breakpad.appspot.com/301001
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@828 4c0a9323-5329-0410-9bdc-e9ce6186880e
