Check generator validity (i.e. that alg has been initialized) before
allowing reads from the generator or allowing reads of the generator's
capacity.
This aligns our implementation with the documented error code behavior
in our crypto.h and the PSA Crypto API.
PSA spec now defines more generic PSA storage types instead of the ITS
specific ones. This is necessary in order to integrate with
the newer implementation of PSA ITS landing in Mbed OS soon.
Changes include the following:
- psa_status_t replaces psa_its_status_t
- psa_storage_info_t replaces psa_its_info_t
- psa_storage_uid_t replaces psa_its_uid_t
When `MBEDTLS_PLATFORM_C` is not enabled, our PSA Crypto implementation
depends on the standard C library for functions like snprintf() and
exit(). However, our implementation was not including the proper header
files nor redefining all `mbedtls_*` symbols properly to ensure
successful builds without MBEDTLS_PLATFORM_C. Add the necessary header
files and macro definitions to our PSA Crypto implementation.
When MBEDTLS_CHECK_PARAMS is enabled, it's required to have an
implementation of mbedtls_param_failed() present. Without it in the PSA
examples, building the PSA examples will result in linker errors like
the following.
../../library/libmbedcrypto.a(rsa.c.o): In function `mbedtls_rsa_import':
rsa.c:(.text+0x9fd): undefined reference to `mbedtls_param_failed'
../../library/libmbedcrypto.a(rsa.c.o): In function `mbedtls_rsa_import_raw':
rsa.c:(.text+0xb0b): undefined reference to `mbedtls_param_failed'
../../library/libmbedcrypto.a(rsa.c.o): In function `mbedtls_rsa_complete':
rsa.c:(.text+0xe63): undefined reference to `mbedtls_param_failed'
../../library/libmbedcrypto.a(rsa.c.o): In function `mbedtls_rsa_export_raw':
rsa.c:(.text+0xfee): undefined reference to `mbedtls_param_failed'
../../library/libmbedcrypto.a(rsa.c.o): In function `mbedtls_rsa_export':
rsa.c:(.text+0x116f): undefined reference to `mbedtls_param_failed'
../../library/libmbedcrypto.a(rsa.c.o):rsa.c:(.text+0x1304): more undefined
references to `mbedtls_param_failed' follow
collect2: error: ld returned 1 exit status
programs/psa/CMakeFiles/crypto_examples.dir/build.make:97: recipe for target
'programs/psa/crypto_examples' failed
make[2]: *** [programs/psa/crypto_examples] Error 1
Add an implementation of mbedtls_param_failed() to the PSA Crypto
examples to avoid getting this error on the PSA examples.
Mbed TLS has deprecated a few module specific error codes in favor of
more general-purpose or cross-module error codes. Use these new error
codes instead of the deprecated error codes.
Silence a compiler warning about implicit fallthrough by using a comment
format the compiler understand to mean that the fallthrough is
intentional.
In file included from library/cipher.c:63:0:
include/mbedtls/psa_util.h: In function ‘mbedtls_psa_translate_cipher_mode’:
include/mbedtls/psa_util.h:91:15: error: this statement may fall through [-Werror=implicit-fallthrough=]
if( taglen == 0 )
^
include/mbedtls/psa_util.h:94:9: note: here
default:
^~~~~~~
cc1: all warnings being treated as errors
$ gcc --version
gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Copy our include/mbedtls/config.h file, which is our default
configuration, to configs/config-psa-crypto.h, updating what was
previously there to the latest defaults.
Resolve conflicts by performing the following.
- Take the upstream Mbed TLS ChangeLog verbatim.
- Reject changes to Makefiles and CMake that are related to using Mbed
Crypto as a submodule. It doesn't make sense to use Mbed Crypto as a
submodule of itself.
- Reject README changes, as Mbed Crypto has its own, different README.
- Reject PSA-related changes to config.h. We don't want to disable the
availability of the PSA Crypto API by default in the Mbed Crypto
config.h.
- Don't inadvertently revert dead code removal in
mbedtls_cipher_write_tag() which was added in f2a7529403 ("Fix
double return statement in cipher.c")
- Where Mbed Crypto already had some MBEDTLS_USE_PSA_CRYPTO code (from
past companion PRs) take the latest version from Mbed TLS which
includes integration with MBEDTLS_CHECK_PARAMS.
- Update the version of the shared library files to match what's
currently present in Mbed TLS.
- Reject removal of testing with PSA from config full tests.
- Resolve conflicts in test tests/suites/helpers.function, where both
Mbed Crypto and Mbed TLS both added documentation for TEST_ASSERT.
Combine text from both documentation efforts.
- Reject adding a submodule of ourselves.
- Reject addition of submodule tests in all.sh.
- Reject addition of submodule to library path in
tests/scripts/run-test-suites.pl.
- Avoid using USE_CRYPTO_SUBMODULE=1 in
component_test_use_psa_crypto_full_cmake_asan() in all.sh.
When using PSA with MBEDTLS_ENTROPY_NV_SEED, some test suites
require the seed file for PSA initialization, which was normally generated
later, when entropy tests were run. This change creates an initial seedfile
in all.sh.
Some of the types may in principle be wider than `unsigned`, so use
`unsigned long` in printf.
Add support for signed types: a status is a signed value, and
preferentially printed in decimal.
Don't unconditionally enable PSA Crypto for all tests. Only enable it in
tests that require it. This allows crypto tests to check that
psa_crypto_init() fails when it is supposed to fail, since we want to
perform some action in a test, and then call psa_crypto_init() and check
the result without it having been called previously.
Set the CMake-observed variable `CTEST_OUTPUT_ON_FAILURE`, so that when
a "make test" run by CMake fails, verbose test output about the detail
of failure is available.
Enable handling of zero-length null output in PKCS1 v1.5 decryption.
Prevent undefined behavior by avoiding a memcpy() to zero-length null
output buffers.
In mbedtls_rsa_rsaes_oaep_encrypt and
mbedtls_rsa_rsaes_pkcs1_v15_encrypt, if the input length is 0 (which
is unusual and mostly useless, but permitted) then it is fine for the
input pointer to be NULL. Don't return an error in this case.
When `input` is NULL, `memcpy( p, input, ilen )` has undefined behavior
even if `ilen` is zero. So skip the `memcpy` call in this case.
Likewise, in `mbedtls_rsa_rsaes_oaep_decrypt`, skip the `memcpy` call if
`*olen` is zero.
Resolve incompatibilties in the RSA module where changes made for
parameter validation prevent Mbed Crypto from working. Mbed Crypto
depends on being able to pass zero-length buffers that are NULL to RSA
encryption functions.
This reverts commit 2f660d047d.
Test that freshly-initialized contexts exhibit default behavior through
the API. Do this without depending on the internal representation of the
contexts. This provides better portability of our tests on compilers
like MSVC.
The macro PSA_HASH_FINAL_SIZE no longer exists and all instances of it
should be replaced by PSA_HASH_SIZE. Replace all remaining instances of
PSA_HASH_FINAL_SIZE with PSA_HASH_SIZE.
For must-fail asymmetric decryption tests, add an output size parameter
so that tests can directly control what output buffer size they allocate
and use independently from the key size used. This enables better
testing of behavior with various output buffer sizes.
When RSA decrypting, unlike with RSA encrypting, we sometimes expect the
output length will be less than the key size. For instance, in the case
where the plaintext is zero-length we expect the output length of the
decryption to be zero-length as well, not key size in length.
For must-fail tests, we don't expect output-buffer-sized RSA-decryption,
only that the output length is less than or equal to the output size, so
these tests remain unchanged.
Change the must-pass tests to expect that the actual output size is
equal to the expected length of the output buffer instead of always
being the key size.
After merging the latest RSA implementation from Mbed TLS, we have a
regression in that we no longer properly handle zero-length null output
in PKCS1 v1.5 decryption. Prevent undefined behavior by avoiding a
memcpy() to zero-length null output buffers.
Merge a development version of Mbed TLS 2.16.0 that doesn't have
parameter validation into development.
The following conflicts were resolved:
- Update ChangeLog to include release notes merged from development so
far, with a version of "2.14.0+01b34fb316a5" and release date of
"xxxx-xx-xx" to show this is not a released version, but instead a
snapshot of the development branch equivalent to version of the 2.14.0
with additional commits from the mbedtls/development branch up through
01b34fb316 included. Entries added for unreleased versions of Mbed
Crypto remain at the top of the file for Mbed TLS 2.xx.x.
- Replace the Mbed Crypto version of
mbedtls_rsa_rsaes_pkcs1_v15_decrypt() with the version from Mbed TLS
which fixes timing variations and memory access variations that could
lead to a Bleichenbacher-style padding oracle attack. This will
prevent using psa_asymmetric_decrypt() with zero-length output buffers
until a follow up commit is made to restore this capability.
- In ssl_srv.c, include changes for both the new ECDH interface and
opaque PSK as already added to development previously.
In one place, exercise_key was used in a such a way that if the test
failed inside exercise_key, the test suite would correctly report the
test as failed but would not report the exact location of the failure.
Fix this.
Add documentation for exercise_key that explains how to use it.
