Some functions within the X.509 module return an ASN.1 low level
error code where instead this error code should be wrapped by a
high-level X.509 error code as in the bulk of the module.
Specifically, the following functions are affected:
- mbedtls_x509_get_ext()
- x509_get_version()
- x509_get_uid()
This commit modifies these functions to always return an
X.509 high level error code.
Care has to be taken when adapting `mbetls_x509_get_ext()`:
Currently, the callers `mbedtls_x509_crt_ext()` treat the
return code `MBEDTLS_ERR_ASN1_UNEXPECTED_TAG` specially to
gracefully detect and continue if the extension structure is not
present. Wrapping the ASN.1 error with
`MBEDTLS_ERR_X509_INVALID_EXTENSIONS` and adapting the check
accordingly would mean that an unexpected tag somewhere
down the extension parsing would be ignored by the caller.
The way out of this is the following: Luckily, the extension
structure is always the last field in the surrounding structure,
so if there is some data remaining, it must be an Extension
structure, so we don't need to deal with a tag mismatch gracefully
in the first place.
We may therefore wrap the return code from the initial call to
`mbedtls_asn1_get_tag()` in `mbedtls_x509_get_ext()` by
`MBEDTLS_ERR_X509_INVALID_EXTENSIONS` and simply remove
the special treatment of `MBEDTLS_ERR_ASN1_UNEXPECTED_TAG`
in the callers `x509_crl_get_ext()` and `x509_crt_get_ext()`.
This renders `mbedtls_x509_get_ext()` unsuitable if it ever
happened that an Extension structure is optional and does not
occur at the end of its surrounding structure, but for CRTs
and CRLs, it's fine.
The following tests need to be adapted:
- "TBSCertificate v3, issuerID wrong tag"
The issuerID is optional, so if we look for its presence
but find a different tag, we silently continue and try
parsing the subjectID, and then the extensions. The tag '00'
used in this test doesn't match either of these, and the
previous code would hence return LENGTH_MISMATCH after
unsucessfully trying issuerID, subjectID and Extensions.
With the new code, any data remaining after issuerID and
subjectID _must_ be Extension data, so we fail with
UNEXPECTED_TAG when trying to parse the Extension data.
- "TBSCertificate v3, UIDs, invalid length"
The test hardcodes the expectation of
MBEDTLS_ERR_ASN1_INVALID_LENGTH, which needs to be
wrapped in MBEDTLS_ERR_X509_INVALID_FORMAT now.
Fixes#2431.
When parsing a substructure of an ASN.1 structure, no field within
the substructure must exceed the bounds of the substructure.
Concretely, the `end` pointer passed to the ASN.1 parsing routines
must be updated to point to the end of the substructure while parsing
the latter.
This was previously not the case for the routines
- x509_get_attr_type_and_value(),
- mbedtls_x509_get_crt_ext(),
- mbedtls_x509_get_crl_ext().
These functions kept using the end of the parent structure as the
`end` pointer and would hence allow substructure fields to cross
the substructure boundary. This could lead to successful parsing
of ill-formed X.509 CRTs.
This commit fixes this.
Care has to be taken when adapting `mbedtls_x509_get_crt_ext()`
and `mbedtls_x509_get_crl_ext()`, as the underlying function
`mbedtls_x509_get_ext()` returns `0` if no extensions are present
but doesn't set the variable which holds the bounds of the Extensions
structure in case the latter is present. This commit addresses
this by returning early from `mbedtls_x509_get_crt_ext()` and
`mbedtls_x509_get_crl_ext()` if parsing has reached the end of
the input buffer.
The following X.509 parsing tests need to be adapted:
- "TBSCertificate, issuer two inner set datas"
This test exercises the X.509 CRT parser with a Subject name
which has two empty `AttributeTypeAndValue` structures.
This is supposed to fail with `MBEDTLS_ERR_ASN1_OUT_OF_DATA`
because the parser should attempt to parse the first structure
and fail because of a lack of data. Previously, it failed to
obey the (0-length) bounds of the first AttributeTypeAndValue
structure and would try to interpret the beginning of the second
AttributeTypeAndValue structure as the first field of the first
AttributeTypeAndValue structure, returning an UNEXPECTED_TAG error.
- "TBSCertificate, issuer, no full following string"
This test exercises the parser's behaviour on an AttributeTypeAndValue
structure which contains more data than expected; it should therefore
fail with MBEDTLS_ERR_ASN1_LENGTH_MISMATCH. Because of the missing bounds
check, it previously failed with UNEXPECTED_TAG because it interpreted
the remaining byte in the first AttributeTypeAndValue structure as the
first byte in the second AttributeTypeAndValue structure.
- "SubjectAltName repeated"
This test should exercise two SubjectAltNames extensions in succession,
but a wrong length values makes the second SubjectAltNames extension appear
outside of the Extensions structure. With the new bounds in place, this
therefore fails with a LENGTH_MISMATCH error. This commit adapts the test
data to put the 2nd SubjectAltNames extension inside the Extensions
structure, too.
The X.509 parsing test suite test_suite_x509parse contains a test
exercising X.509 verification for a valid MD4/MD5 certificate in a
profile which doesn't allow MD4/MD5. This commit adds an analogous
test for MD2.
The example programs programs/x509/cert_req and programs/x509/cert_write
(demonstrating the use of X.509 CSR and CRT writing functionality)
previously didn't support MD2 signatures.
For testing purposes, this commit adds support for MD2 to cert_req,
and support for MD2 and MD4 to cert_write.
- Replace 'RSA with MD2' OID '2a864886f70d010102' by
'RSA with SHA-256' OID '2a864886f70d01010b':
Only the last byte determines the hash, and
`MBEDTLS_OID_PKCS1_MD2 == MBEDTLS_OID_PKCS1 "\x02"`
`MBEDTLS_OID_PKCS1_SHA256 == MBEDTLS_OID_PKCS1 "\x0b"`
See oid.h.
- Replace MD2 dependency by SHA256 dependency.
- Adapt expected CRT info output.
* origin/pr/2649:
list-symbols.sh: if the build fails, print the build transcript
Document "check-names.sh -v"
all.sh: invoke check-names.sh in print-trace-on-exit mode
Print a command trace if the check-names.sh exits unexpectedly
* origin/pr/2612:
Adjust backport's documentation to account for missing features
Backport a doxygen note from development for `mbedtls_ssl_conf_max_frag_len()`
Update change log
Reword ssl_conf_max_frag_len documentation for clarity
We've observed that sometimes check-names.sh exits unexpectedly with
status 2 and no error message. The failure is not reproducible. This
commits makes the script print a trace if it exits unexpectedly.
* origin/pr/2494:
Ignore more generated files: seedfile, apidoc
Improve .gitignore grouping and documentation
Generate tags for Vi, for Emacs and with Global
Enabling the USE_CRYPTO_SUBMODULE option causes problems if the
crypto submodule isn't present. For example, when building
mbed-crypto as a submodule, it should use error.c from the parent
project if USE_CRYPTO_SUBMODULE is set. However if the parent
project isn't present, then the build will fail. Only enable it
if the submodule actually exists.
* origin/pr/2546: (31 commits)
Add documentation for why we're catching all exceptions
Use check_output instead of Popen
Start unused variable with underscore
Correct documentation
Check that the report directory is a directory
Use namespaces instead of full classes
Fix pylint issues
Don't put abi dumps in subfolders
Add verbose switch to silence all output except the final report
Fetch the remote crypto branch, rather than cloning it
Prefix internal functions with underscore
Add RepoVersion class to make handling of many arguments easier
Reduce indentation levels
Improve documentation
Use optional arguments for setting repositories
Only build the library
Add ability to compare submodules from different repositories
Add handling for cases when not all .so files are present
Extend functionality to allow setting crypto submodule version
Simplify logic for checking if report folder can be removed
...
When doing ABI/API checking, its useful to have a list of all the
identifiers that are defined in the internal header files, as we
do not promise compatibility for them. This option allows for a
simple method of getting them for use with the ABI checking script.
There are a number of arguments being passed around, nearly all of
which are duplicated between the old and new versions. Moving these
into a separate class should hopefully make it simpler to follow
what is being done.
