In all.sh, when an explicit list of components is specified, error out
if one of the components is not known or not supported. Patterns that
happen to match zero components are still effectively ignored.
Fix#2783
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the `not` function, in keep-going mode, arrange to report the
failing command (rather than `"$@"`).
Note that the `!` keyword should not be used, because failures with
`!` are not reported properly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the obsolete functions record_status and if_build_succeeded.
They didn't affect error detection, but they made error reporting
worse since $BASH_COMMAND would be the unexpanded "$@".
Keep the function definitions for the sake of pull requests using them
that may still be in flight.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove ssl-opt.err even if it's empty.
Call cat unconditionally: it'll have no visible effect if the file is
empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit completely rewrites keep-going mode. Instead of relying
solely on "set -e", which has some subtle limitations (such as being
off anywhere inside a conditional), use an ERR trap to record errors.
Run each component in a subshell. This way a component can set
environment variables, change the current directory, etc., without
affecting other components.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This will let us use bash features that are not found in some other sh
implementations, such as DEBUG and ERR traps, "set -o pipefail", etc.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Was getting errors like:
In file included from /usr/include/limits.h:25:0,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:168,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/syslimits.h:7,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:34,
from ../include/mbedtls/check_config.h:30,
from ../include/mbedtls/build_info.h:81,
from common.h:26,
from asn1write.c:20:
/usr/include/features.h:367:25: fatal error: sys/cdefs.h: No such file or directory
There are two packages to choose from: armhf or armel. Since the comment
in all.sh says we're trying to be close to Debian's "armel"
architecture, choose that, and fix a comment that was mentioning
gnueabihf for no apparent reason.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently it can't be mandatory, since we can't install the required toolchain
on Jenkins right away.
Also, while at it, remove `SHELL='sh -x'` from the other arm5vte component; it
was a leftover from debugging.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Add cipher accelerator compilation flags to
test_psa_crypto_drivers() all.sh component. The flags
are not necessary currently but may become.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Test cipher operations by a transparent driver in all.sh
test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Test hash algorithm functions when called through a transparent
driver in all.sh test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Test signature and signature verification by a transparent
driver in all.sh test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The point of having an external RNG is that you can disable all
built-in RNG functionality: both the entropy part and the DRBG part.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The SSL test programs can now use mbedtls_psa_get_random() rather than
entropy+DRBG as a random generator. This happens if
the configuration option MBEDTLS_USE_PSA_CRYPTO is enabled, or if
MBEDTLS_TEST_USE_PSA_CRYPTO_RNG is set at build time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Extend import/export/generate key through a PSA
transparent driver without software fallback
testing to RSA keys.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Whether MBEDTLS_USE_PSA_CRYPTO is enabled makes a significant
difference with respect to how random generators are used (and, for
no-HMAC_DRBG, how ECDSA signature is dispatched), so test both with
and without it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The compilation guards in key_management.c are now
accelerator compilation guards (MBEDTLS_PSA_ACCEL_KEY_TYPE_xyz).
As a consequence when running the PSA driver wrapper
tests as part of test_psa_crypto_config_basic
and test_psa_crypto_drivers all.sh components all
key management cryptographic operations were handled by
the software builtin fallback, and not by the test driver
as intended in the first place.
This commits fixes this issue by:
. declaring an accelerator for ECC key pairs in
test_psa_crypto_config_basic.
. declaring an accelerator for both ECC and RSA
key pairs in test_psa_crypto_drivers.
It is possible to declare an accelerator for both
ECC and RSA key pairs in test_psa_crypto_drivers
and not in test_psa_crypto_config_basic because
in the case of test_psa_crypto_drivers the new
PSA configuration is not activated. That way,
the builtin fallback software implementation
is present to supply the transparent test driver
when some support is missing in it (mainly
RSA key generation).
Note that the declaration of accelerators does
much more than just "fixing" the execution flow of
driver wrapper tests, it makes all import and public
key export cryptographic operations in all unit
tests being handled by the transparent test driver
(provided that it supports the key type).
One test case related to key generation is
partially disabled. This will be fixed with the
rework of psa_generate_key along the lines
described in psa-crypto-implementation-structure.md.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In component_test_no_hmac_drbg, the fact that HMAC_DRBG is disabled
doesn't affect the SSL code, but the fact that deterministic ECDSA is
disabled does. So run some ECDSA-related SSL tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support HMAC_DRBG in ssl_client2 and ssl_server2, in addition to
CTR_DRBG. CTR_DRBG is still used if present, but it's now possible to
run the SSL test programs with CTR_DRBG disabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
New tests have been added for all the hash algorithms to
confirm they compile correctly when using PSA_WANT and
accelerator guards.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Add two builds with MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG to all.sh:
* full minus all DRBG (validates that PSA can work without any of the
DRBG modules).
* with MBEDTLS_USE_PSA_CRYPTO and no CTR_DRBG (validates that PSA can
work without CTR_DRBG, and that it works for USE_PSA_CRYPTO).
The goal is to exercise default/full, with/out USE_PSA_CRYPTO, and
with/out deterministic ECDSA (which requires HMAC_DRBG). The choice of
pairing is rather arbitrary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support using HMAC_DRBG instead of CTR_DRBG in the PSA subsystem.
Use HMAC_DRBG if CTR_DRBG is available. Choose between SHA-256 and
SHA-512 based on availability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Moved new check_crypto_config.h file from include/psa to library
directory and the file is now included from *.c instead of the
crypto_config.h file. Fixed guards in PSA crypto library based
on review comments for new PSA crypto config features.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Revised the placement of various new MBEDTLS_PSA_BUILTIN_xxx
guards based on review comments. Corrected guards in psa
test driver to use _ACCEL version instead of _BUILTIN version.
Updated check_config_psa.h to include additional dependency checks
for more algorithms. Renamed some of the new tests to be a little
more clear on the purpose.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Code under MBEDTLS_USE_PSA_CRYPTO define is PSA client
code intended to use key identifiers of type psa_key_id_t.
Thus the MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
configuration option is incompatible with
MBEDTLS_USE_PSA_CRYPTO.
State this in config.h and check_config.h.
As a consequence:
. remove MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER from
the full configuration, as MBEDTLS_USE_PSA_CRYPTO is
part of it.
. add a new component in all.sh to keep testing the
library when MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
is set.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Updated macros in config_psa.h that used ECC_xxx to use KEY_TYPE_ECC_xxx
per comments from review. Implemented a check_config_psa.h to help with
dependency checking of features enabled in config_psa.h. Added
check_config_psa.h to visual studio project.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
In order to pass existing tests like test_psa_crypto_config_basic
and test_psa_crypto_config_no_driver, all the new features need
to be enabled in the default crypto_config.h file. This change
enables those features by default and updates the other new
tests to compensate for everything being enabled by disabling
some features for some of the tests as needed.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Updated some of the test names to better reflect what they are testing.
Expanded the testing around RSA feature for PSA crypto config. Updated
the test script to support backing up and restoring the
include/psa/crypto_config.h file so that features can be individually
setup for each unique feature test.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The KEY_TYPE_ECC_KEY_PAIR and KEY_TYPE_ECC_PUBLIC_KEY were previously
being guarded by MBEDTLS_ECP_C in the PSA crypto library code. This change
moves it to the new MBEDTLS_PSA_BUILTIN_xxx and separates KEY_PAIR
and PUBLIC_KEY as needed. Tests have also been added to validate the new
settings.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
This phase adds in support for the following features being
added to the list of features that can be configured in the
include/psa/crypto_config.h header file using the PSA_WANT_ALG_xxx
macros: ECDH, HMAC, HKDF, and RSA. These changes include changes to
the PSA crypto library to use the appropriate new guards that
will allow the feature to be compiled in or out either using
new PSA_WANT_ALG_xxx or the previous MBEDTLS_xxx macros.
For HKDF and HMAC, most of the PSA library code did not have a
specific matching MBEDTLS_xxx macro for that feature, but was instead
using the generic dependent MBEDTLS_MD_C macro. The ECDH and RSA
features more closely aligned with a direct replacement with a similar
macro.
The new tests for RSA, HMAC, and HKDF would normally unset additional
dependent macros, but when attempting to implement that level of
testing it required removal of too many core features like MD_C, PK_C,
ECP_C and other low level features. This may point to additional phases of
work to complete the transition of these features to the new model.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Add a build with MBEDTLS_ERROR_STRERROR_DUMMY but not MBEDTLS_ERROR_C.
Previously, both options were enabled by default, but
MBEDTLS_ERROR_STRERROR_DUMMY only matters when MBEDTLS_ERROR_C is
enabled, so its effect was not tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
