Move the handling of the sign out of the base-specific loops. This
both simplifies the code, and corrects an edge case: the code in the
non-hexadecimal case depended on mbedtls_mpi_mul_int() preserving the
sign bit when multiplying a "negative zero" MPI by an integer, which
used to be the case but stopped with PR #2512.
Fix#4295. Thanks to Guido Vranken for analyzing the cause of the bug.
Credit to OSS-Fuzz.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a buffer overflow in mbedtls_mpi_sub_abs() when calculating
|A| - |B| where |B| is larger than |A| and has more limbs (so the
function should return MBEDTLS_ERR_MPI_NEGATIVE_VALUE).
Fix#4042
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
T1 is set to a 2-limb value. The first operation that takes it as
input is mbedtls_mpi_mul_int, which makes it grow to 3 limbs. Later it
is shifted left, which causes it to grow again. Set its size to the
final size from the start. This saves two calls to calloc(), at the
expense of a slowdown in some operations involving T1 as input since
it now has more leading zeros.
Setting T1 to 3 limbs initially instead of 2 saves about 6% of the
calloc() calls in test_suite_ecp and does not incur a performance
penalty. Setting T1 to A->n + 2 limbs instead of 2 saves about 20% of
the calloc calls and does not cause a measurable performance
difference on my Linux PC.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Note a possible microoptimization in mbedtls_mpi_mul_hlp that I tried
in the hope of reducing the number of allocations, but turned out to
be counterproductive.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rewrite mbedtls_mpi_mul_int to call mpi_mul_hlp directly rather than
create a temporary mpi object. This has the benefit of not performing
an allocation when the multiplication is in place (mpi operand aliased
with the result) and the result mpi is large enough.
This saves about 40% of the calloc() calls in test_suite_ecp. There is
no measurable performance difference on my Linux PC.
The cost is a few bytes in bignum.o.
When there is no aliasing, or when there is aliasing but the mpi
object needs to be enlarged, the performance difference is negligible.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_sub_abs systematically allocated a new mpi when the result
was aliased with the right operand (i.e. X = A - X). This aliasing
very commonly happens during ECP operations. Rewrite the function to
allocate only if the result might not fit otherwise.
This costs a few bytes of code size in bignum.o, and might make
mbedtls_mpi_sub_abs very very slightly slower when no reallocation is
done. However, there is a substantial performance gain in ECP
operations with Montgomery curves (10-20% on my PC).
test_suite_ecp drops from 1422794 to 1271506 calls to calloc().
This commit also fixes a bug whereby mbedtls_mpi_sub_abs would leak
memory when X == B (so TB was in use) and the result was negative.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a memory leak in mbedtls_mpi_sub_abs when the output parameter is
aliased to the second operand (X = A - X) and the result is negative.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* development: (488 commits)
Fix removal of deprecated PSA constants
Use GitHub-compatible table formatting
Remove psa header files in uninstall part
Change function casting in `ssl_calc_finished_tls_sha384`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Add changelog entry file to `ChangeLog.d`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Fix GCC warning about `test_snprintf`
Fix mismatched function parameters (prototype/definition)
Fix build failure on gcc-11
Copyediting
Clarifications around key import
Fix copypasta
A variable is unused in some configurations
Rename test_driver_keygen to test_driver_key_management
Move "internal use" sentence attached to the wrong function
Added changelog
Plug in the entry point for public key export through driver
tests: psa: Reset key attributes where needed
Improve/fix documentation
...
Check that the exponent and modulus is below `MBEDTLS_MPI_MAX_BITS` before
performing a time expensive operation (modular exponentiation). This prevents
a potential DoS from Diffie-Hellman computations with extremely
large key sizes.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Probably the `W[2 << MBEDTLS_MPI_WINDOW_SIZE]` notation is based on a transcription of 2**MBEDTLS_MPI_WINDOW_SIZE.
Signed-off-by: Daniel Otte <d.otte@wut.de>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In library source files, include "common.h", which takes care of
including "mbedtls/config.h" (or the alternative MBEDTLS_CONFIG_FILE)
and other things that are used throughout the library.
FROM=$'#if !defined(MBEDTLS_CONFIG_FILE)\n#include "mbedtls/config.h"\n#else\n#include MBEDTLS_CONFIG_FILE\n#endif' perl -i -0777 -pe 's~\Q$ENV{FROM}~#include "common.h"~' library/*.c 3rdparty/*/library/*.c scripts/data_files/error.fmt scripts/data_files/version_features.fmt
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The function mbedtls_mpi_sub_abs first checked that A >= B and then
performed the subtraction, relying on the fact that A >= B to
guarantee that the carry propagation would stop, and not taking
advantage of the fact that the carry when subtracting two numbers can
only be 0 or 1. This made the carry propagation code a little hard to
follow.
Write an ad hoc loop for the carry propagation, checking the size of
the result. This makes termination obvious.
The initial check that A >= B is no longer needed, since the function
now checks that the carry propagation terminates, which is equivalent.
This is a slight performance gain.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There was some confusion during review about when A->p[n] could be
nonzero. In fact, there is no need to set A->p[n]: only the
intermediate result d might need to extend to n+1 limbs, not the final
result A. So never access A->p[n]. Rework the explanation of the
calculation in a way that should be easier to follow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The function mpi_sub_hlp had confusing semantics: although it took a
size parameter, it accessed the limb array d beyond this size, to
propagate the carry. This made the function difficult to understand
and analyze, with a potential buffer overflow if misused (not enough
room to propagate the carry).
Change the function so that it only performs the subtraction within
the specified number of limbs, and returns the carry.
Move the carry propagation out of mpi_sub_hlp and into its caller
mbedtls_mpi_sub_abs. This makes the code of subtraction very slightly
less neat, but not significantly different.
In the one other place where mpi_sub_hlp is used, namely mpi_montmul,
this is a net win because the carry is potentially sensitive data and
the function carefully arranges to not have to propagate it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mpi_sub_hlp performs a subtraction A - B, but took parameters in the
order (B, A). Swap the parameters so that they match the usual
mathematical syntax.
This has the additional benefit of putting the output parameter (A)
first, which is the normal convention in this module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Let code analyzers know that this is deliberate. For example MSVC
warns about the conversion if it's implicit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mpi_montmul, an auxiliary function for modular
exponentiation (mbedtls_mpi_mod_exp) that performs Montgomery
multiplication, the last step is a conditional subtraction to force
the result into the correct range. The current implementation uses a
branch and therefore may leak information about secret data to an
adversary who can observe what branch is taken through a side channel.
Avoid this potential leak by always doing the same subtraction and
doing a contant-trace conditional assignment to set the result.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Separate out a version of mpi_safe_cond_assign that works on
equal-sized limb arrays, without worrying about allocation sizes or
signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This reverts commit 2cc69fffcf.
A check was added in mpi_montmul because clang-analyzer warned about a
possibly null pointer. However this was a false positive. Recent
versions of clang-analyzer no longer emit a warning (3.6 does, 6
doesn't).
Incidentally, the size check was wrong: mpi_montmul needs
T->n >= 2 * (N->n + 1), not just T->n >= N->n + 1.
Given that this is an internal function which is only used from one
public function and in a tightly controlled way, remove both the null
check (which is of low value to begin with) and the size check (which
would be slightly more valuable, but was wrong anyway). This allows
the function not to need to return an error, which makes the source
code a little easier to read and makes the object code a little
smaller.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If Y was constructed through functions in this module, then Y->n == 0
iff Y->p == NULL. However we do not prevent filling mpi structures
manually, and zero may be represented with n=0 and p a valid pointer.
Most of the code can cope with such a representation, but for the
source of mbedtls_mpi_copy, this would cause an integer underflow.
Changing the test for zero from Y->p==NULL to Y->n==0 causes this case
to work at no extra cost.
In the case of *ret we might need to preserve a 0 value throughout the
loop and therefore we need an extra condition to protect it from being
overwritten.
The value of done is always 1 after *ret has been set and does not need
to be protected from overwriting. Therefore in this case the extra
condition can be removed.
The code relied on the assumptions that CHAR_BIT is 8 and that unsigned
does not have padding bits.
In the Bignum module we already assume that the sign of an MPI is either
-1 or 1. Using this, we eliminate the above mentioned dependency.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
Multiplication is known to have measurable timing variations based on
the operands. For example it typically is much faster if one of the
operands is zero. Remove them from constant time code.
