The race condition mentioned in the previous commit
"Stop CMake out of source tests running on 16.04"
has also been observed with test_cmake_as_subdirectory on 3.1 and can
presumably happen on 2.28 as well. So skip it on Ubuntu 16.04 as well.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run some of the test configs twice, enabling MBEDTLS_USE_PSA_CRYPTO
and MBEDTLS_PSA_CRYPTO_C in one of the runs.
Add relevant comments in these configs.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Running the out of source CMake test on Ubuntu 16.04 using more than one
processor (as the CI does) can create a race condition whereby the build
fails to see a generated file, despite that file actually having been
generated. This problem appears to go away with 18.04 or newer, so make
the out of source tests not supported on Ubuntu 16.04
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Add ECDSA and RSA signature acceleration testing
with signature capabilitites removed from the
Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit removes the test_psa_crypto_config_basic
all.sh component that can no longer work without
adapting it to the separately compiled test driver
library. This component is replaced by several
components in the following commits to test various
type of acceleration independently.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Non-regression for the fix in https://github.com/ARMmbed/mbedtls/pull/5126:
libmbedtls and libmbedx509 did not declare their dependencies on libmbedx509
and libmbedcrypto when built with make.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Empty the current line if it's entirely inside a comment.
Don't incorrectly end a block comment at the second line if it doesn't
contain `*/`.
Recognize `/*` to start a multiline comment even if it isn't at the start of
the line.
When stripping off comments, consistently strip off `/*` and `*/`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use '|'.join([comma-separated list]) rather than r'...|' r'...|'. This way
there's less risk of forgetting a '|'. Pylint will yell if we forget a comma
between list elements.
Use match rather than search + mandatory start anchor for EXCLUSION_LINES.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make parse_identifiers less complex. Pylint was complaining that it had too
many local variables, and it had a point.
* Lift the constants identifier_regex and exclusion_lines to class
constants (renamed to uppercase because they're constants).
* Lift the per-file loop into a new function parse_identifiers_in_file.
No intended behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix cases like
```
/*short comment*/ /*long
comment */
int mbedtls_foo;
```
where the previous code thought that the second line started outside of a
comment and ended inside of a comment.
I believe that the new code strips comments correctly. It also strips string
literals, just in case.
Fixes#5191.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The new fork was rebased on top of the upstream master, removing the
need for most of the downstream patches we carried.
On the other hand, the new fork includes a couple of fixes to problems
that were not addressed by the original fork, or were introduced with the
new version of psa-arch-tests.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Genertae test_suite_psa_crypto_generate_key.generated.data.
Use test_suite_psa_crypto_generate_key.function as a test function.
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
Set the build type to Release (-O2) when running CPU-intensive tests (ssl-opt,
or unit tests with debug features). A build type of Check (-Os) would be best
when the main objective of the build is to check for build errors or warnings
and there aren't many tests to run; in this commit there are no such test
cases to change. Only use cmake with no build type (which results in not
passing a -O option, and thus missing some GCC warnings) when exercising cmake
features.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use Release mode (-O2) for component_test_full_cmake_clang which runs SSL
tests.
To have some coverage with Check mode (which enables more compiler warnings
but compiles with -Os), change a few other builds that only run unit tests
at most to Check mode.
Don't add any new builds, to keep the total build volume down. We don't need
extensive coverage of all combinations, just a reasonable set.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
SSL testing benefits from faster executables, so use -O2 rather than -O1.
Some builds use -O1, but that's intended for jobs that only run unit tests,
where the build takes longer than the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Otherwise $COMMAND_LINE_COMPONENTS would try to expand wildcard patterns
based on files in the current directory.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Have simpler patterns related to 'test' (the central objective being to keep
going if 'make test' or 'tests/...' fails, but not if 'make tests' fails).
Add 'cd' as a can't-keep-going command.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Count invocations from 1 to n instead of n to 1.
Explain how changing the loop variable would cause an error if the function
was not executed in a subshell.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
all.sh restores **/Makefile from git in case the version in the worktree was
from doing a cmake in-tree build. Instead of doing this unconditionally, do
it only if the toplevel Makefile seems to have been automatically
generated (by cmake or otherwise, e.g. by mbedtls-prepare-build). This way
all.sh no longer silently wipes changes made to Makefile but not committed yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Back up the config files at the beginning of all.sh, rather than before each
component. In particular, create the backup before running cleanup for the
first time. This fixes#3139 (all.sh using a config.h.bak from a previous
job), and makes all.sh more robust against accidentally using a modified
config.h midway through because a component messed with the backup.
Use a different extension (*.all.bak rather than *.bak) for the backups.
This is necessary to ensure that auxiliary scripts such as depends*.pl that
make their own backup don't remove all.sh's backup, which the code from this
commit does not support.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate programs/test/cpp_dummy_build.cpp dynamically instead of
maintaining it manually. This removes the need to update it when the list of
headers changes.
Include all the headers unconditionally except for the ones that cannot be
included directly.
Support this dynamic generation both with make and with cmake.
Adapt all.sh accordingly. Remove the redundant C build from
component_build_default_make_gcc_and_cxx (it was also done in
component_test_default_out_of_box), leaving a component_test_make_cxx. Also
run the C++ program, because why not. Do this in the full configuration
which may catch a bit more problems in headers.
Fixes#2570 for good.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Thomas Daubney <>
Don't default to unbridled -j, which causes a load spike and isn't really
faster.
"Number of CPUs" is implemented here as a reasonable compromise between
portability, correctness and simplicity. This is just a default that can be
overridden by setting MAKEFLAGS in the environment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
redirect_out was no longer used and redirect_err was only used to
quiet dd. Change the dd invocation to only print diagnostics on
error (on platforms where this is possible).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is necessary to actually keep going and finish the
component-specific cleanup in component_test_cmake_out_of_source if
ssl-opt.err is non-empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In all.sh, when an explicit list of components is specified, error out
if one of the components is not known or not supported. Patterns that
happen to match zero components are still effectively ignored.
Fix#2783
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the `not` function, in keep-going mode, arrange to report the
failing command (rather than `"$@"`).
Note that the `!` keyword should not be used, because failures with
`!` are not reported properly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the obsolete functions record_status and if_build_succeeded.
They didn't affect error detection, but they made error reporting
worse since $BASH_COMMAND would be the unexpanded "$@".
Keep the function definitions for the sake of pull requests using them
that may still be in flight.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove ssl-opt.err even if it's empty.
Call cat unconditionally: it'll have no visible effect if the file is
empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit completely rewrites keep-going mode. Instead of relying
solely on "set -e", which has some subtle limitations (such as being
off anywhere inside a conditional), use an ERR trap to record errors.
Run each component in a subshell. This way a component can set
environment variables, change the current directory, etc., without
affecting other components.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This will let us use bash features that are not found in some other sh
implementations, such as DEBUG and ERR traps, "set -o pipefail", etc.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* There's no compat-2.x.h in Mbed TLS 2.x, but there's a compat-1.3.h which
similarly needs to be excluded.
* mbedtls_config.h is called config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't try to enumerate excluded files. List included files, and remove names
from the list if they match an excluded-file pattern.
This resolves the problem that the script could get into an infinite loop
due to the use of recursive globbing. Unfortunately, Python's recursive
globs follows symbolic links to directories, which leads to an infinite loop
if a symbolic link points to an ancestor of the directory that contains it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Copy the following files:
tests/scripts/check_names.py
tests/scripts/list_internal_identifiers.py
tests/scripts/list-identifiers.sh
Copy the version from b19be6b5f3c9a92b5b17fa27e16901f132f1a310, which is the
result of merging https://github.com/ARMmbed/mbedtls/pull/1638 into the
development branch.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To facilitate maintenance and to make it easier to reproduce all.sh builds
manually, remove the long, repeated list of -D options from
component_test_psa_crypto_config_basic and component_test_psa_crypto_drivers
and put it in a header file instead.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When building with make, `make test` runs `run-test-suites.pl` which has a
verbose mode that reports the failing test cases, but it didn't provide a
way to enable this verbose mode. With the present commit, you can run `make
test TEST_FLAGS=-v` to use verbose mode.
Base the default for verbose mode on the same environment variable that
`make test` uses when building with CMake: default off, but enabled if
`CTEST_OUTPUT_ON_FAILURE` is true. In particular, verbose mode will now be
on when building from `all.sh`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It was unmaintained and untested, and the fear of breaking it was holding us
back. Resolves#4934.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Was getting errors like:
In file included from /usr/include/limits.h:25:0,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:168,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/syslimits.h:7,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:34,
from ../include/mbedtls/check_config.h:30,
from ../include/mbedtls/build_info.h:81,
from common.h:26,
from asn1write.c:20:
/usr/include/features.h:367:25: fatal error: sys/cdefs.h: No such file or directory
There are two packages to choose from: armhf or armel. Since the comment
in all.sh says we're trying to be close to Debian's "armel"
architecture, choose that, and fix a comment that was mentioning
gnueabihf for no apparent reason.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently it can't be mandatory, since we can't install the required toolchain
on Jenkins right away.
Also, while at it, remove `SHELL='sh -x'` from the other arm5vte component; it
was a leftover from debugging.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
