Currently only SHA1 is supported as PRF algorithm for PBKDF2
(PKCS#5 v2.0).
This means that keys encrypted and authenticated using
another algorithm of the SHA family cannot be decrypted.
This deficiency has become particularly incumbent now that
PKIs created with OpenSSL1.1 are encrypting keys using
hmacSHA256 by default (OpenSSL1.0 used PKCS#5 v1.0 by default
and even if v2 was forced, it would still use hmacSHA1).
Enable support for all the digest algorithms of the SHA
family for PKCS#5 v2.0.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
- Rephrase file/function/parameter/enum/define/error descriptions into full
and clear sentences.
- Make sure to adhere to the Arm writing guidelines.
- Fix missing/incorrect Doxygen tags.
- Standardize terminology used within the file.
- Add full standard name in file description.
GitHub PR: #1316
- Rephrase file/function/parameter/enum/define/error descriptions into full
and clear sentences.
- Make sure to adhere to the Arm writing guidelines.
- Fix missing/incorrect Doxygen tags.
- Standardize terminology used within the file.
- Rephrase the descriptions of all md_alg and hashlen parameters.
GitHub PR: #1327
- Rephrase file/function/parameter/enum/define/error descriptions into full
and clear sentences.
- Make sure to adhere to the Arm writing guidelines.
- Fix missing/incorrect Doxygen tags.
- Standardize terminology used within the file.
- Standardize defines documentation
GitHub PR: #1323
- Rephrase function/parameter/enum/define/error descriptions into full and
clear sentences.
- Make sure to adhere to the Arm writing guidelines.
- Fix missing/incorrect Doxygen tags.
- Standardize terminology used within the file.
GitHub PR: #1306
- Rephrase function/parameter/enum/define/error descriptions into full and
clear sentences.
- Make sure to adhering to the Arm writing guidelines.
- Fix missing/incorrect Doxygen tags.
- Standardize terminology used within the file.
- Fix iv_len values per the standard.
GitHub PR: #1305
- Separate "\file" blocks from copyright, so that Doxygen doesn't repeat
the copyright information in all the Detailed Descriptions.
- Improve phrasing and clarity of functions, parameters, defines and enums.
GitHub PR: #1292
A new test for mbedtls_timing_alarm(0) was introduced in PR 1136, which also
fixed it on Unix. Apparently test results on MinGW were not checked at that
point, so we missed that this new test was also failing on this platform.
Add MBEDTLS_ERR_XXX_HW_ACCEL_FAILED error codes for all cryptography
modules where the software implementation can be replaced by a hardware
implementation.
This does not include the individual message digest modules since they
currently have no way to return error codes.
This does include the higher-level md, cipher and pk modules since
alternative implementations and even algorithms can be plugged in at
runtime.
This commit allows users to provide alternative implementations of the
ECJPAKE interface through the configuration option MBEDTLS_ECJPAKE_ALT.
When set, the user must add `ecjpake_alt.h` declaring the same
interface as `ecjpake.h`, as well as add some compilation unit which
implements the functionality. This is in line with the preexisting
support for alternative implementations of other modules.
The corner cases fixed include:
* Allocating a buffer of size 0. With this change, the allocator now
returns a NULL pointer in this case. Note that changes in pem.c and
x509_crl.c were required to fix tests that did not work under this
assumption.
* Initialising the allocator with less memory than required for headers.
* Fix header chain checks for uninitialised allocator.
The _ext suffix suggests "new arguments", but the new functions have
the same arguments. Use _ret instead, to convey that the difference is
that the new functions return a value.
Conflict resolution:
* ChangeLog: put the new entries in their rightful place.
* library/x509write_crt.c: the change in development was whitespace
only, so use the one from the iotssl-1251 feature branch.
This commit adds some explicit downcasts from `size_t` to `uint8_t` in
the RSASSA signature encoding function `rsa_rsassa_pkcs1_v15_encode`.
The truncation is safe as it has been checked beforehand that the
respective values are in the range of a `uint8_t`.
1) `mbedtls_rsa_import_raw` used an uninitialized return
value when it was called without any input parameters.
While not sensible, this is allowed and should be a
succeeding no-op.
2) The MPI test for prime generation missed a return value
check for a call to `mbedtls_mpi_shift_r`. This is neither
critical nor new but should be fixed.
3) Both the RSA keygeneration example program and the
RSA test suites contained code initializing an RSA context
after a potentially failing call to CTR DRBG initialization,
leaving the corresponding RSA context free call in the
cleanup section of the respective function orphaned.
While this defect existed before, Coverity picked up on
it again because of newly introduced MPI's that were
also wrongly initialized only after the call to CTR DRBG
init. The commit fixes both the old and the new issue
by moving the initializtion of both the RSA context and
all MPI's prior to the first potentially failing call.
A previous commit changed the record encryption function
`ssl_encrypt_buf` to compute the MAC in a temporary buffer
and copying the relevant part of it (which is strictly smaller
if the truncated HMAC extension is used) to the outgoing message
buffer. However, the change was only made in case Encrypt-Then-MAC
was enabled, but not in case of MAC-Then-Encrypt. While this
doesn't constitute a problem, for the sake of uniformity this
commit changes `ssl_encrypt_buf` to compute the MAC in a temporary
buffer in this case, too.
The function `mbedtls_rsa_complete` is supposed to guarantee that
RSA operations will complete without failure. In contrast, it does
not ensure consistency of parameters, which is the task of the
checking functions `rsa_check_pubkey` and `rsa_check_privkey`.
Previously, the maximum allowed size of the RSA modulus was checked
in `mbedtls_rsa_check_pubkey`. However, exceeding this size would lead
to failure of some RSA operations, hence this check belongs to
`mbedtls_rsa_complete` rather than `mbedtls_rsa_check_pubkey`.
This commit moves it accordingly.
The function `pk_get_rsapubkey` originally performed some basic
sanity checks (e.g. on the size of public exponent) on the parsed
RSA public key by a call to `mbedtls_rsa_check_pubkey`.
This check was dropped because it is not possible to thoroughly
check full parameter sanity (i.e. that (-)^E is a bijection on Z/NZ).
Still, for the sake of not silently changing existing behavior,
this commit puts back the call to `mbedtls_rsa_check_pubkey`.
- Adapt the change in all.sh to the new keep-going mode
- Restore alphabetical order of configuration flags for
alternative implementations in config.h and rebuild
library/version_features.c
`mbedtls_rsa_deduce_primes` implicitly casts the result of a call to
`mbedtls_mpi_lsb` to a `uint16_t`. This is safe because of the size
of MPI's used in the library, but still may have compilers complain
about it. This commit makes the cast explicit.
Conflict resolution: additions in the same places as
upstream-public/pr/865, both adding into lexicographically sorted
lists, resolved by taking the additions in lexicographic order.
* development:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
* public/pr/1136:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
1. Surround the generate keys with
`#if ! defined(MBEDTLS_CMAC_ALT) || defined(MBEDTLS_SELF_TEST)`
to resolve build issue when `MBEDTLS_SELF_TEST` is defined for
alternative CMAC as well
2. Update ChangeLog
Increase the duration of the self test, otherwise it tends to fail on
a busy machine even with the recently upped tolerance. But run the
loop only once, it's enough for a simple smoke test.
mbedtls_timing_self_test fails annoyingly often when running on a busy
machine such as can be expected of a continous integration system.
Increase the tolerances in the delay test, to reduce the chance of
failures that are only due to missing a deadline on a busy machine.
Print some not-very-nice-looking but helpful diagnosis information if
the timing selftest fails. Since the failures tend to be due to heavy
system load that's hard to reproduce, this information is necessary to
understand what's going on.
mbedtls_timing_get_timer with reset=1 is called both to initialize a
timer object and to reset an already-initialized object. In an
initial call, the content of the data structure is indeterminate, so
the code should not read from it. This could crash if signed overflows
trap, for example.
As a consequence, on reset, we can't return the previously elapsed
time as was previously done on Windows. Return 0 as was done on Unix.
The POSIX/Unix implementation of mbedtls_set_alarm did not set the
mbedtls_timing_alarmed flag when called with 0, which was inconsistent
with what the documentation implied and with the Windows behavior.
* restricted/pr/403:
Correct record header size in case of TLS
Don't allocate space for DTLS header if DTLS is disabled
Improve debugging output
Adapt ChangeLog
Add run-time check for handshake message size in ssl_write_record
Add run-time check for record content size in ssl_encrypt_buf
Add compile-time checks for size of record content and payload
* development:
Don't split error code description across multiple lines
Register new error code in error.h
Move deprecation to separate section in ChangeLog
Extend scope of ERR_RSA_UNSUPPORTED_OPERATION error code
Adapt RSA test suite
Adapt ChangeLog
Deprecate usage of RSA primitives with wrong key type
* restricted/pr/397:
Don't split error code description across multiple lines
Register new error code in error.h
Move deprecation to separate section in ChangeLog
Extend scope of ERR_RSA_UNSUPPORTED_OPERATION error code
Adapt RSA test suite
Adapt ChangeLog
Deprecate usage of RSA primitives with wrong key type
In a previous PR (Fix heap corruption in implementation of truncated HMAC
extension #425) the place where MAC is computed was changed from the end of
the SSL I/O buffer to a local buffer (then (part of) the content of the local
buffer is either copied to the output buffer of compare to the input buffer).
Unfortunately, this change was made only for TLS 1.0 and later, leaving SSL
3.0 in an inconsistent state due to ssl_mac() still writing to the old,
hard-coded location, which, for MAC verification, resulted in later comparing
the end of the input buffer (containing the computed MAC) to the local buffer
(uninitialised), most likely resulting in MAC verification failure, hence no
interop (even with ourselves).
This commit completes the move to using a local buffer by using this strategy
for SSL 3.0 too. Fortunately ssl_mac() was static so it's not a problem to
change its signature.
Fix missing definition of mbedtls_zeroize when MBEDTLS_FS_IO is
disabled in the configuration.
Introduced by e7707228b4
Merge remote-tracking branch 'upstream-public/pr/1062' into development
In case truncated HMAC must be used but the Mbed TLS peer hasn't been updated
yet, one can use the compile-time option MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT to
temporarily fall back to the old, non-compliant implementation of the truncated
HMAC extension.
The truncated HMAC extension as described in
https://tools.ietf.org/html/rfc6066.html#section-7 specifies that when truncated
HMAC is used, only the HMAC output should be truncated, while the HMAC key
generation stays unmodified. This commit fixes Mbed TLS's behavior of also
truncating the key, potentially leading to compatibility issues with peers
running other stacks than Mbed TLS.
Details:
The keys for the MAC are pieces of the keyblock that's generated from the
master secret in `mbedtls_ssl_derive_keys` through the PRF, their size being
specified as the size of the digest used for the MAC, regardless of whether
truncated HMAC is enabled or not.
/----- MD size ------\ /------- MD size ----\
Keyblock +----------------------+----------------------+------------------+---
now | MAC enc key | MAC dec key | Enc key | ...
(correct) +----------------------+----------------------+------------------+---
In the previous code, when truncated HMAC was enabled, the HMAC keys
were truncated to 10 bytes:
/-10 bytes-\ /-10 bytes-\
Keyblock +-------------+-------------+------------------+---
previously | MAC enc key | MAC dec key | Enc key | ...
(wrong) +-------------+-------------+------------------+---
The reason for this was that a single variable `transform->maclen` was used for
both the keysize and the size of the final MAC, and its value was reduced from
the MD size to 10 bytes in case truncated HMAC was negotiated.
This commit fixes this by introducing a temporary variable `mac_key_len` which
permanently holds the MD size irrespective of the presence of truncated HMAC,
and using this temporary to obtain the MAC key chunks from the keyblock.
Previously, MAC validation for an incoming record proceeded as follows:
1) Make a copy of the MAC contained in the record;
2) Compute the expected MAC in place, overwriting the presented one;
3) Compare both.
This resulted in a record buffer overflow if truncated MAC was used, as in this
case the record buffer only reserved 10 bytes for the MAC, but the MAC
computation routine in 2) always wrote a full digest.
For specially crafted records, this could be used to perform a controlled write of
up to 6 bytes past the boundary of the heap buffer holding the record, thereby
corrupting the heap structures and potentially leading to a crash or remote code
execution.
This commit fixes this by making the following change:
1) Compute the expected MAC in a temporary buffer that has the size of the
underlying message digest.
2) Compare to this to the MAC contained in the record, potentially
restricting to the first 10 bytes if truncated HMAC is used.
A similar fix is applied to the encryption routine `ssl_encrypt_buf`.
* development: (30 commits)
update README file (#1144)
Fix typo in asn1.h
Improve leap year test names in x509parse.data
Correctly handle leap year in x509_date_is_valid()
Renegotiation: Add tests for SigAlg ext parsing
Parse Signature Algorithm ext when renegotiating
Minor style fix
config.pl get: be better behaved
config.pl get: don't rewrite config.h; detect write errors
Fixed "config.pl get" for options with no value
Fix typo and bracketing in macro args
Ensure failed test_suite output is sent to stdout
Remove use of GNU sed features from ssl-opt.sh
Fix typos in ssl-opt.sh comments
Add ssl-opt.sh test to check gmt_unix_time is good
Extend ssl-opt.h so that run_test takes function
Always print gmt_unix_time in TLS client
Restored note about using minimum functionality in makefiles
Note in README that GNU make is required
Fix changelog for ssl_server2.c usage fix
...
This commit fixes a comparison of ssl_session->encrypt_then_mac against the
ETM-unrelated constant MBEDTLS_SSL_EXTENDED_MS_DISABLED. Instead,
MBEDTLS_SSL_ETM_DISABLED should be used.
The typo is has no functional effect since both constants have the same value 0.
Remove a check introduced in the previous buffer overflow fix with keys of
size 8N+1 which the subsequent fix for buffer start calculations made
redundant.
Added a changelog entry for the buffer start calculation fix.
For a key of size 8N+1, check that the first byte after applying the
public key operation is 0 (it could have been 1 instead). The code was
incorrectly doing a no-op check instead, which led to invalid
signatures being accepted. Not a security flaw, since you would need the
private key to craft such an invalid signature, but a bug nonetheless.
The check introduced by the previous security fix was off by one. It
fixed the buffer overflow but was not compliant with the definition of
PSS which technically led to accepting some invalid signatures (but
not signatures made without the private key).
Fix buffer overflow in RSA-PSS signature verification when the hash is
too large for the key size. Found by Seth Terashima, Qualcomm.
Added a non-regression test and a positive test with the smallest
permitted key size for a SHA-512 hash.
The function mbedtls_ecp_gen_keypair_base did not wipe the stack buffer used to
hold the private exponent before returning. This commit fixes this by not using
a stack buffer in the first place but instead calling mpi_fill_random directly
to acquire the necessary random MPI.
This commit modifies mpi_read_binary to always allocate the minimum number of
limbs required to hold the entire buffer provided to the function, regardless of
its content. Previously, leading zero bytes in the input data were detected and
used to reduce memory footprint and time, but this non-constant behavior turned
out to be non-tolerable for the cryptographic applications this function is used
for.
Previously, if `MBEDTLS_SSL_RENEGOTIATION` was disabled, incoming handshake
messages in `mbedtls_ssl_read` (expecting application data) lead to the
connection being closed. This commit fixes this, restricting the
`MBEDTLS_SSL_RENEGOTIATION`-guard to the code-paths responsible for accepting
renegotiation requests and aborting renegotiation attempts after too many
unexpected records have been received.
Signature algorithm extension was skipped when renegotiation was in
progress, causing the signature algorithm not to be known when
renegotiating, and failing the handshake. Fix removes the renegotiation
step check before parsing the extension.
As the optional RSA parameters DP, DQ and QP are effectively discarded (they are only considered for their length to
ensure that the key fills the entire buffer), it is not necessary to read them into separate MPI's.
The number of loop iterations per candidate in `mbedtls_deduce_primes` was off
by one. This commit corrects this and removes a toy non-example from the RSA
test suite, as it seems difficult to have the function fail on small values of N
even if D,E are corrupted.
Signature algorithm extension was skipped when renegotiation was in
progress, causing the signature algorithm not to be known when
renegotiating, and failing the handshake. Fix removes the renegotiation
step check before parsing the extension.
This commit splits off the RSA helper functions into separate headers and
compilation units to have a clearer separation of the public RSA interface,
intended to be used by end-users, and the helper functions which are publicly
provided only for the benefit of designers of alternative RSA implementations.
1) move the change into Features from Changes, in the changLog
2) Change the feature alternative configuration MBEDTLS_ECDH_ALT
definition to function alternative defintions
MBEDTLS_ECDH_COMPUTE_SHARED_ALT and MBEDTLS_ECDH_GEN_PUBLIC_ALT
1) update ChangLog to have new feature in Features instead of Changes
2) Change MBEDTLS_ECDSA_ALT to function specific alternative definitions:
MBEDTLS_ECDSA_SIGN_ALT, MBEDTLS_ECDSA_VERIFY_ALT and MBEDTLS_ECDSA_GENKEY_ALT
It is not necessary to pass a CSPRNG to `mbedtls_rsa_deduce_moduli`, as there
exist well-working static strategies, and even if a PRNG is preferred, a
non-secure one would be sufficient.
Further, the implementation is changed to use a static strategy for the choice
of candidates which according to some benchmarks even performs better than the
previous one using random candidate choices.
Change ssl_parse_server_hello() so that the parsed first four random
bytes from the ServerHello message are printed by the TLS client as
a Unix timestamp regardless of whether MBEDTLS_DEBUG_C is defined. The
debug message will only be printed if debug_level is 3 or higher.
Unconditionally enabling the debug print enabled testing of this value.
Change ssl_parse_server_hello() so that the parsed first four random
bytes from the ServerHello message are printed by the TLS client as
a Unix timestamp regardless of whether MBEDTLS_DEBUG_C is defined. The
debug message will only be printed if debug_level is 3 or higher.
Unconditionally enabling the debug print enabled testing of this value.
Further, state explicitly that wrong key types need not be supported by alternative RSA implementations, and that those
may instead return the newly introduced error code MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
This commit returns to using constant macros instead of global variables for the DHM group constants. Further, macros
providing the binary encoding of the primes from RFC 3526 and RFC 7919 are added. The hex-string macros are deprecated.
This commit modifies the PKCS1 v1.5 signature verification function `mbedtls_rsa_rsassa_pkcs1_v15_verify` to prepare the
expected PKCS1-v1.5-encoded hash using the function also used by the signing routine `mbedtls_rsa_rsassa_pkcs1_v15_sign`
and comparing it to the provided byte-string afterwards. This comes at the benefits of (1) avoiding any error-prone
parsing, (2) removing the dependency of the RSA module on the ASN.1 parsing module, and (3) reducing code size.
This commit moves the code preparing PKCS1 v1.5 encoded hashes from `mbedtls_rsa_rsassa_pkcs1_v15_sign` to a separate
non-public function `rsa_rsassa_pkcs1_v15_encode`. This code-path will then be re-used by the signature verification function
`mbetls_rsa_rsassa_pkcs1_v15_verify` in a later commit.
Original intention was to be allowed to perform in-place operations like changing the byte-order before importing
parameters into an HSM. Now a copy is needed in this case, but there's no more danger of a user expecting the arguments
to be left untouched.
State explicitly that `pk_parse_pkcs8_undencrypted_der` and `pk_parse_key_pkcs8_encrypted_der` are not responsible for
zeroizing and freeing the provided key buffer.
This commit changes the implementation of `mbedtls_rsa_get_len` to return
`ctx->len` instead of always re-computing the modulus' byte-size via
`mbedtls_mpi_size`.
